Gentlemen,
I have read a few threads on this and I cannot get a handle on how well it works. The ROM I dl'd did not look like the shipped rom, it was a windows mobile screen, not a TF3D screen. Also the start screen was different. I have to turn in this phone cause my earpiece does not always work. So please, someone that has done a warranteee turn in after flashing a new ROM respond with how the process worked for yyou. Also, which of the shiiped ROMs shoould I use fromm the raphael wiki page.
Thanks,
Scott
I’ve never had to do any warranty work on my phone but I have used the latest ROM update from HTC’s website which has everything you’re asking for in a ROM. Go to htc.com click the support tab and then select your device from the drop down menu.
Everything you need to know is located in the Wiki, search for it and follow those directions and you'll be good.
SEARCH before starting a new thread!
http://forum.xda-developers.com/showthread.php?t=502720
Hey buddy, as I stated I did search the threads. The thread you quoted I used and as I stated it did not look like an att shipped ROM. That is why I posted. Please read the post before you flame..
Scottk517 said:
Hey buddy, as I stated I did search the threads. The thread you quoted I used and as I stated it did not look like an att shipped ROM. That is why I posted. Please read the post before you flame..
Click to expand...
Click to collapse
ok, maybe u are right i ain't got a fuze so i didn't need the at&t rom. still the solution to your problem is very simple.. having a fuze means you should be able to download the latest official rom either from the htc site or the at&t site. follow the steps in the thread u already found and when in comes to flashing just flash what you downloaded.
to further show u my good intentions i went ahead and found the latest official release from at&t, flash this and you won't have any problems with warranty
http://forum.xda-developers.com/showthread.php?t=519698&highlight=latest+at&t
The Process....
1. Flash the stock AT&T rom. It should include the stock AT&T Radio. 2. Flash the OEM Hard SPL as instructed in the sticky at the beginning of this forum. If you can't get the hard SPL to take then flash it from the bootloader screen. 3. Re-flash your stock AT&T Rom again to get the Hard SPL version of 1.95 that came with your Fuze. Don't skip the re-flash of the stock ROM or you will be sending the phone back with 1.90 not 1.95. May the force be with you. I'm not responsible if you mis-read the directions and mess up your phone!! I have had to do this twice now and it works perfectly.
Cheers!
Related
Ok, short and sweet.
Have a new Touch pro but its got the lousy Vodafone ROM on it. I want the default HTC ROM (black and white)
can someone post me the idiots guide (as i dont want to brick it) on how i acheive this. Assume i know nothing about updating ROMS....cos i dont!
thanks everyone
Darren.
hi got mine yesterday
first of i would make an image
http://forum.xda-developers.com/showthread.php?t=427507
although ive asked the author to make my raws into a bootable flash as i wasnt confident so we should have a chance of going back to vodafone stock is possible
then you need to consider hardspl
http://forum.xda-developers.com/showthread.php?t=410150
then a rom i really would recommend
http://forum.xda-developers.com/showthread.php?t=426099
all these answers come from this forum i would say do a bit of reading
also check out the wiki very useful
hth
thanks for the info...have you done yours yet?
yes the stock voda rom lasted 3 hours as i needed to charge it then i dumped the image hard spl then flahsed it and spent a little time setting the rom how i like it with a few extra programs
ive had a kaiser for a year now and work on a dialy basis with these phones
I had a quick look at the links...i dont even know what an "SPL" is....
is there anywhere that literally says..do this, then do that, then do this etc?
do you have the black and white HTC ROM now then, are there any quirks?
sorry to sound dumb but i have been waiting ages for this handset and dont want to brick it due to my lack of experience with flashing ROMS on phones.
thanks very much so far...
im running romeos as the link i sent u
its very good
there are instructions in the spl link i sent u on how to spl your device its quite easy:
Instructions:
1) download Hard-SPL package from attachment, extract to an empty folder. make sure it's launched from a local drive (not through network drive, etc.)
2) you must Have Phone Synced with PC in Windows Mobile!
3) run RaphaelHardSPL-Unsigned_190_1_3.exe,
4) follow steps in the RUU, check device for prompts after PC shows loading bar.
5) it should go to black screen now.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.90.OliNex.
Click to expand...
Click to collapse
as for the rom you mean the black and white one i dont know what this one is
darren.scott said:
I had a quick look at the links...i dont even know what an "SPL" is....
is there anywhere that literally says..do this, then do that, then do this etc?
do you have the black and white HTC ROM now then, are there any quirks?
sorry to sound dumb but i have been waiting ages for this handset and dont want to brick it due to my lack of experience with flashing ROMS on phones.
thanks very much so far...
Click to expand...
Click to collapse
Dear Darren,
What exactly is/are your question(s)?
You must be a bit more specific...
Cheers.
P.S. PM me with you MSN Messenger and i will help you online.
P.SII. PM stands for Private Message
thanks for the posts to date.
As for specifics i am looking for the default HTC ROM (no amendments or additional features etc) as the carrier's (Vodafone UK) one is "not pretty"
I dont know what an SPL or RRU is so was looking for a step by step instruction on how i do this including backing up my existing ROM in case i need to return to it for warranty etc.
The last post was very informative, and i will have a look at this but i was basically looking for any help i could get.
thanks
Darren.
spl:
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
rru: (this is based on a different phone but much applies the same here)
http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
the link i gave u for dumping an image:
also contatins this link this looks like the stock rom ?
i have passed the raw files over to the jcespi2005 who very kindly is constructing them on this thread so we will have a back up of the voda stock rom
all you need to do is to read the hard spl link in this forum
this should be more than enough to get u going
can i ask why the stock rom? why not somethign better?
I ditched the Vodafone ROM sharpish @ the weekend.. Black & White and tons better now
Lots of very usefull information here, i will review and take the decision as to whether will do this or not. As for the question about the stock rom, this was purely the way it looked v's the vodafone rom. do the other roms have additional functionality then?
My Touch Pro should be here before the weekend from Vodafone. From looking around the forum this seems to be the latest stock HTC rom.
http://forum.xda-developers.com/showthread.php?t=418382
darren.scott said:
Ok, short and sweet.
Have a new Touch pro but its got the lousy Vodafone ROM on it. I want the default HTC ROM (black and white)
can someone post me the idiots guide (as i dont want to brick it) on how i acheive this. Assume i know nothing about updating ROMS....cos i dont!
thanks everyone
Darren.
Click to expand...
Click to collapse
Hi,
I am using the Vodafone UK ROM on my new Touch Pro and have installed .NET CF3.5 and Advanced Config 3.3 which has some handy performance tweaks.
Using Regedit I changed the registry as below...
HKEY Current User\software\microsoft\activesync
\Body truncation = 20480 decimal
(This prevents "TRUNCATED TEXT" in my contact notes)
Due to warranty issues and the time involved, I don’t want to flash a new ROM unless there are significant improvements. With the above tweaks I find my device runs well. What is it about the UK Vodafone ROM that you think is lousy?
Regards,
J
Hi i am interested as well to see if i can go to the original htc rom.first of all i tried installing the latest update from the htc site but my serial number wouldnt allow me to(i have vodafone branded)tried the update that a friend downloaded for his htc tp but it didnt work either.I am new at this and i dont know lots of things about flashing.utube application is a minus and maybe other stuff that i will find further down the road. if i do the above will i be able to update the rom (the one that the htc site gives) even if i use a friends of mine in the future?should i just sell this one and get a proper htc branded.thanks
There is no need to get rid of a branded phone and get a HTC branded one. they are the same phone in most cases. You just need to change the ROM. This is actualy easy to do. It sounds hard and there are alot of warnings, but dont worry, if you follow the instructions it is very simple. I have done it recently on a UK voda phone. The speed increase of the phone is amazing.
I would hartly recommend doing it.
@ Justin0679, the Voda rom was ok, but the speed of a new rom is a GREAT improvment. Makes it as responsive a a IPhone.
Any noobs have any questions I am more than happy to answer, as believe it or not, I was noe once, Well 2 weeks ago..........
Will i be able after i replace the vodafone rom with the htc to get the updates from the htc site(even if i have to wait for my friend to download it for his phone first).what are the steps?
Konstantinos21 said:
Will i be able after i replace the vodafone rom with the htc to get the updates from the htc site(even if i have to wait for my friend to download it for his phone first).what are the steps?
Click to expand...
Click to collapse
yes. just look on the site for the HTC rom. or try one of the many others that are out there.
Hey i wanted to flash my device with some of the custom roms that are available for my phone, but I'm not sure which roms I can use for my device. I wasn't sure if the fact that mine is the verizon version made a difference. I was also wondering if anyone knew where I can find the OEM verizon rom for the touch pro so that i can revert back to it if anything should go wrong. Also, sorry to sound like a newb, but I'm not entirely sure what HardSPL is, what it does or how to do it . If someone could clarify all this for me I would much appreciate it. Thanks in advance.
Dump your rom for backup
Hello,
i can´t help you, which roms you should flash.
But here in the Raphael Rom section, is a great "How To" about Rom dumping and reconstruction.
I also tried this, and have to say it´s realy great tutorial.
You find it here: http://forum.xda-developers.com/showthread.php?t=427507&highlight=dump
The autor is jcespi2005 (Thank you for such great Tuto), and if you follow everything step by step, then it will work 100%.
So you can backup you verizon rom and go back if you need to.
Bye
If you plan on flashing your Verizon phone you need to look under the CDMA fourms, not the GSM one. this is for the Eupore, AT&T, and T-mobile ones. Sprint, and verizon are CDMA.
As for information about flashing, go to wiki, and start reading. Lots of good FAQs there.
beware... do not flash GSM roms onto CDMA phones...!!
i thought that because this was rom development that this would also include cdma models as well. so i was wondering if anyone knew to find the verizon oem rom. i saw the instruction on how to reconstruct my rom before flashing with another rom, but i'm too worried about doing it wrong and frying my phone. i was hoping that someone a little more experience had gotten around to creating a download for it, but this phone is fairly new to verizon.
I am sure this has been posted but I have not found it. I hate my current ROM version for my sprint touch pro and want to change it. I’m wanting to try the proven rom 2.1 but am hesitant because I can not find the OEM rom for my phone. Plus I am not 100% positive that the proven rom 2.1 will work for my phone since it’s a cdma touch pro. On the wiki page for my phone it only has question marks for a link to the OEM rom. Is there a place I can download the OEM rom in case the provenRom 2.1 does not work right? Also, my phone is the CDMA version raph800. Please help because I would like to at least format the phone back to original like it was when I bought it. It would be great if I can find another rom that is better.
Thanks!
Everything you need to know about flashing cooked roms on the HTC TP is here:http://forum.ppcgeeks.com/forumdisplay.php?f=68&sort=voteavg&order=desc&daysprune=-1. Also be aware that you need to HardSPL (unlock) your TP before you go to flash it. The direct link to the OEM roms is here: http://forum.ppcgeeks.com/showthread.php?t=42741. Here is a poll in a thread of different roms and what they rank: http://forum.ppcgeeks.com/showthread.php?t=52651. I personaly like the Juggalo ROM. It can be found here: http://forum.ppcgeeks.com/showthread.php?t=49341&highlight=Juggalo, but it's all about personal preference.
-----------------------------
...::: /\©|d©ØЯΞ :::...
-----------------------------
They say the devil was a rebel angel; If you wanna f**k with the livin', you got ta learn to f**k with the dead...
Yes first things first please read:
http://forum.ppcgeeks.com/showthread.php?t=43266
before you flash your phone, it is really easy to do but you have to make sure that you follow directions.
Thanks for the information I will go read up on it more.
I just purchased a 512Leo Hd2, unbranded SPL 1.42. Now this site has been an amazing resource. I have been thinking about flashing a new ROM but I'm not sure about it yet. To tell you the truth I don't really mind the stock HTC ROM. However, I'm dying to run Android 2.2, problem being is that my radio version is 2.06.51.07 now from what I understand that version won't allow me to run Android. And I've tried it, Linux starts to load and either it freezes or the screen slowly blacks out. I've tried the formatting and it doesn't work. So my ? is this. After running HSPL, also don't know which one to run 1,2 or 3?, will the stock ROM still be there? IN which case I can then go ahead ad flash a radio version that will allow me to run Android? Or do I have to find a stock ROM from somewhere and load that? Can I save the ROM version that is on my phone now then reload it? How do I do that? If someone c an fill these blanks in for me I'd appreciate it!
Cheers
htchtchd2 said:
my radio version is 2.06.51.07 now from what I understand that version won't allow me to run Android.
Click to expand...
Click to collapse
Correct.
htchtchd2 said:
don't know which one to run 1,2 or 3?, will the stock ROM still be there?
Click to expand...
Click to collapse
Flashing HSPL will do absolutely nothing to your ROM. It simply unlocks the phones SPL and allows the flashing of non-branded or unofficial ROMs.
More about HSPL 1&2 and HSPL 3
Which one you need depends on your device. I think HSPL3 might work for all but to be honest I've never bothered to look at it since I have HSPL2 and it works for me.
htchtchd2 said:
IN which case I can then go ahead ad flash a radio version that will allow me to run Android?
Click to expand...
Click to collapse
Yes you can. One of THESE will do the trick.
htchtchd2 said:
Or do I have to find a stock ROM from somewhere and load that? Can I save the ROM version that is on my phone now then reload it? How do I do that?
Click to expand...
Click to collapse
Android works perfectly for me on my stock ROM with radio 2.12.50 For some people, the stock ROM does not work so the short answer is: "it depends". I say try a new radio ROM, leave the stock ROM alone and see if it works. If not, then look into flashing a custom ROM also. As for saving your current ROM, that's a bit more tricky, and more trouble than it's worth since you can find pretty much all the stock roms in the rom development threads such as THIS one.
If you have any other questions or need more clarification ask away (or PM me).
One more thing about flashing ROMS... Use caution and ask questions if you are unsure about something. Make sure you read and understand the threads dedicated to flashing in the links provided... Otherwise, you will have an expensive paper weight on your hands.
Faelok said:
One more thing about flashing ROMS... Use caution and ask questions if you are unsure about something. Make sure you read and understand the threads dedicated to flashing in the links provided... Otherwise, you will have an expensive paper weight on your hands.
Click to expand...
Click to collapse
Hi!
I've been reading all your posts and i have a similar problem with my Leo.
I'm new at this so i am affraid to, like you said, have an "expensive paper weight".
I tried running the "FLASHAHOLIC RUU.." via USB but it keeps hanging while running task29. I then tried the official HTC web site but i doesnt work either.
I baght my device on amazon so it comes with WWE and o want to change it to Portuguese specially because of some keybord letters like "ç" for example.
Can you please give me a step by step guide so i can instal a new rom?
Thanks in advance.
Bitas said:
Hi!
I've been reading all your posts and i have a similar problem with my Leo.
I'm new at this so i am affraid to, like you said, have an "expensive paper weight".
I tried running the "FLASHAHOLIC RUU.." via USB but it keeps hanging while running task29. I then tried the official HTC web site but i doesnt work either.
I baght my device on amazon so it comes with WWE and o want to change it to Portuguese specially because of some keybord letters like "ç" for example.
Can you please give me a step by step guide so i can instal a new rom?
Thanks in advance.
Click to expand...
Click to collapse
Everything you need to know - about flashing the HD2 - * HERE * (to the Mods, andchange this vauable info can be made a sticky in the ROM section?)
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good: