Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good:
Related
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Staunch said:
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Click to expand...
Click to collapse
I may have missed something but i followed the steps to install gingerblur and well, it bricked my Telstra atrix that I only got yesterday
Luckily i made a backup of the telstra firmware as soon as i got it so its all good. Just got no idea on how to install CF. The telstra atrix i'm assuming is the same as the AT&T atrix because they are both "Motorola Atrix MB860" but i could be missing something
Uh oh, radio's and fingerprint reader aren't working
Oh, and it also wont turn itself off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Thanks
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
Click to expand...
Click to collapse
I had a really bad feeling that that would be the case. Bell users appear to have a limited range of options compaired to the AT&T users. Now it seems that the Telstra users will have even less options than the Bell users.
I have at least managed to load HeLauncher, Pyramid & Fancy widgets tonight and now I've have more of the options that I wanted from the HTC desire sense UI.
Still trying to work out how to get my hands on the widget/live weather wallpaper that has that Super Cool looking windscreen wiper that clears the rain away.... Any ideas on how to get ahold of it?
Thanks again.
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
y2whisper said:
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
Click to expand...
Click to collapse
My system version is;
Version.4.1.47,MB860.Telstra.en.AU
Thanks for the info, I will start looking for the other one on this site.
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
they should be able to flash using the gingerblur/greyblur guide by seven2009. you may not be able to deodex with the same instructions but installing should be fine, you would need to flash grey blur and factory reset the device before installing gingerblur.
If that route doesn't work you may need to start by flashing the french rom that is mentioned in that thread first.
makmegs said:
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
Click to expand...
Click to collapse
You are doing better than me so far, but I must admit that going for custom ROM's has me a bit worried. I flashed my Nokia 5800 and it was better for looks and customisation, but it crashed alot. Then I jail breaked my iSheep (iphone 3G) and that was a little better than stock iOS, but it also crashed alot too.
I am hesitant to play around too much with the Atrix, simply because it's so new, and I was patient enough to wait for the Telstra release (instead of an imported AT&T version). However I found this thread that may shed some light on the topic at hand.
http://forums.whirlpool.net.au/forum-replies.cfm?r=29747620#r29747620
User "LeChuck" has some great knowledge and info about this Telstra firmware.
I am just not adventurous enough at the moment to have a crack at it. All I need to do, is find out how I could hard reset back to stock firmware if I don't like mods, then i'll give it a go. Even since rooted it over the weekend, I've notice3d more little issues each day I play around with things.
Can it be "Un-rooted" (is that an actual term used???) back to standard?
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Click to expand...
Click to collapse
I have a buggy unlocked AT&T Atrix too and have been waiting for it to come out in OZ to flash it with either the Telstra Rom or something else. Can you (or anyone) make a suggestion?
procedure of installing custom rom
procedure of installing custom rom on atrix details are below.
system version: 45.0.20.mb860.telstra.en.au
model number:mb860
android versoin:2.3.4
basband version : N_01.100.00R
Webtop version: WT-1.20-133_23
Kernal version [email protected] #7
APflex version : GAS_Asia_usaolygbautel_p013,a012,m001
build number: 4.5.2A-74_OLE-20
shanitop_you said:
procedure of installing custom rom on atrix details are below.
Click to expand...
Click to collapse
You mean, you would like the procedure of installing a custom ROM on those specs? I would too.
It's mainly the BL unlock process I am not sure about on Telstra Atrix of the same spec. I'm comfortable with the rest.
Hi all
I am a little bit confused?
I got my gf (girlfriend) a motorola atrix from website called PANAMOZ when it arrived I found out it was ME860 (HKTW) not MB860 (ATT 4G)
Some of the stuff was in chinese like keyboard etc etc.
I was going to get her a SGS II same as what I have but she said it was too big for her.
Now the problem I have got is it is running android 2.2.2 and my SGS II is on android 2.3.4
How can I get the motorola atrix ME860 on android 2.3.4?
Do I root it, sbf it via RSD lite, unlock bootloader (if so how),fastboot vol up vol down, etc etc.
I have been reading for 2 days on xda forum and I think I am going to go crazy!
My last moto was the wings! and with my nokia's, HTC, iphones, Blackberry's and Samsung's I have not had any problems updating to latest official or un-official firmware.
So all I would like is some help and support for you guys to get the atrix ME860(HKTW) on gingerbread 2.3.3 or 2.3.4
She is not interested in all types of mods or flashing custom roms every other week!
Just a stable phone that won't let her down and yet be SMART.
Thank you in advance for all your help-advice-tutorials-link
Go to Motorola.com find the atrix and ask them how to update, if your not trying to unlock or root. They should be able to help you.
My overclocked alien atrix
Thank you for your input, I don't mind rooting/unlocking it, its just I don't want to end up bricking it.
I have been reading about using RSD and putting on 1.2.6 then root but when I try that, RSD lite just says fail. When I try the HKTW sbf (4.0.500) it does work but it gives me android 2.2.2 froyo on chinese firmware.
I live in UK and don't mind installing US, UK, EU firmware/sbf its just working out how and in what order I need to do this. I have managed to root it using gingerbreak 1.20apk
your further input is most appreciated thank you.
jtheproducer said:
Thank you for your input, I don't mind rooting/unlocking it, its just I don't want to end up bricking it.
I have been reading about using RSD and putting on 1.2.6 then root but when I try that, RSD lite just says fail. When I try the HKTW sbf (4.0.500) it does work but it gives me android 2.2.2 froyo on chinese firmware.
I live in UK and don't mind installing US, UK, EU firmware/sbf its just working out how and in what order I need to do this. I have managed to root it using gingerbreak 1.20apk
your further input is most appreciated thank you.
Click to expand...
Click to collapse
What happens when you just check for software update in the settings?
If that doesn't work then another option I suggest is to fruitcake up.
1. unlock your bootloader (follow the instructions in the International House of Pudding thread in development).
2. Install RomRacer's Recovery (also in development forum)
3. download the HKTW fruitcake in samcripp's fruitcake thread
4. install fruitcake via recovery you installed in step 2
mysticdrew said:
What happens when you just check for software update in the settings?
If that doesn't work then another option I suggest is to fruitcake up.
1. unlock your bootloader (follow the instructions in the International House of Pudding thread in development).
2. Install RomRacer's Recovery (also in development forum)
3. download the HKTW fruitcake in samcripp's fruitcake thread
4. install fruitcake via recovery you installed in step 2
Click to expand...
Click to collapse
it lets me update to 4.0.560 chinese version, after updating not much changes still android 2.2.2 froyo.
will have a look a fruitcake
Many thanks
It sounds like you/your girlfriend don't really need to unlock (which may or may not be safe with the ME860, since it is a different device).
What I would do is search for 2nd init and get the 2.3.4 HKTW sbf and use the /system from that build. Unfortunately you cannot flash it directly since it is test-keys signed not signer for end user use. You're going to have to do some digging around to find all the stuff you need. Your other option is to unlock and flash the /system and boot.img through fastboot.
Or you can learn Mandarin / Chinese and surf the HKTW forums to see if they can give you an (un)official HKTW sbf/rom.
the2dcour said:
It sounds like you/your girlfriend don't really need to unlock (which may or may not be safe with the ME860, since it is a different device).
What I would do is search for 2nd init and get the 2.3.4 HKTW sbf and use the /system from that build. Unfortunately you cannot flash it directly since it is test-keys signed not signer for end user use. You're going to have to do some digging around to find all the stuff you need. Your other option is to unlock and flash the /system and boot.img through fastboot.
Or you can learn Mandarin / Chinese and surf the HKTW forums to see if they can give you an (un)official HKTW sbf/rom.
Click to expand...
Click to collapse
Muuuuuhhhh........
Stop pulling his leg the2dcour.
As for ur HKTW, go to youtube and watch how to upgrade atrix 4G.
Ha ha ha cant stop laughing.... you joker the2dcour.
Ok firstly im no stranger to Android, and not entirely new to Moto (Atrix 4G), but I have to say that the RAZR has me pretty confused.
I have a Rogers RAZR being delivered that I picked up on the cheap. Its brand new and supposedly "unlocked". I would love to get ICS running on it, but despite reading the treads here for the last couple of days im still uncertain if its possible
I have used RSD before with the Atrix, but it was only to apply a patch that would allow you to unlock the bootloader (also surprised to see that the RAZR is still locked down). I know that you can flash ROMs via RSD, but what I do not understand is whether or not root and custom recovery is required? I assume that if you're flashing an official ROM, then no it is not. Correct? I also thought that flashing full sbf files was dangerous to attempt. Maybe im way off here, I don't know.
Im still a bit confused about the GSM patch for CDMA ROMs too. People seem to report issues with their phones when this is done. So im not too sure that it is a good idea to go that route either.
I understand that when things start to happen for a phone in terms of ROMs, recovery, work-arounds etc... that it can get a bit messy in the forum and things can get buried a few pages back, but i've been reading until my head hurts and i'm still uncertain where to begin. Also, there is an update that is also "supposedly" beginning this month for official ICS, but we all know that could be delayed, and delayed, and delayed. Wondering if I should just wait.
I guess I'm really hoping for someone to say do this, then this, and this...viola! I don't need an in depth step by step as I know how to figure out instructions from their respective threads. But if someone has a min to post a point form list like
Root with Motofail
Install Boot to CWM
Flash this ROM
Then this ROM etc etc...
Any help is appreciated and I hope no one thinks im asking to have my hand held here, but im at a loss. Just don't want to F my new phone when it arrives.
Thanks in advance for anyone who can help a fella out.
brunswick000 said:
Ok firstly im no stranger to Android, and not entirely new to Moto (Atrix 4G), but I have to say that the RAZR has me pretty confused.
I have a Rogers RAZR being delivered that I picked up on the cheap. Its brand new and supposedly "unlocked". I would love to get ICS running on it, but despite reading the treads here for the last couple of days im still uncertain if its possible
I have used RSD before with the Atrix, but it was only to apply a patch that would allow you to unlock the bootloader (also surprised to see that the RAZR is still locked down). I know that you can flash ROMs via RSD, but what I do not understand is whether or not root and custom recovery is required? I assume that if you're flashing an official ROM, then no it is not. Correct? I also thought that flashing full sbf files was dangerous to attempt. Maybe im way off here, I don't know.
A. Yes. If you're flashing an official rom you do not need root/cwm. Flashing full sbf with rsd is safer than cwm restoring a nandroid backup. But if you do you'll not be able to receive further otas updates. Bootload is locked in Razr also there's a region signature verification. So you cannot flash another region rom. :/
Im still a bit confused about the GSM patch for CDMA ROMs too. People seem to report issues with their phones when this is done. So im not too sure that it is a good idea to go that route either.
A. Most of related problems on that is due bad procedure following.
I understand that when things start to happen for a phone in terms of ROMs, recovery, work-arounds etc... that it can get a bit messy in the forum and things can get buried a few pages back, but i've been reading until my head hurts and i'm still uncertain where to begin. Also, there is an update that is also "supposedly" beginning this month for official ICS, but we all know that could be delayed, and delayed, and delayed. Wondering if I should just wait.
A. There's one official update for latam razrs, like yours. The 2.3.6 > go into dev section and you'll find out. Ics will out in a month. Fingers crossed!
I guess I'm really hoping for someone to say do this, then this, and this...viola! I don't need an in depth step by step as I know how to figure out instructions from their respective threads. But if someone has a min to post a point form list like
Root with Motofail (motofail is for gsm 2.3.6 only)
Install Boot to CWM (this is for restoring custom roms and backup, u need to be root for)
Flash this ROM (look for latam razr roms)
Then this ROM etc etc...
Any help is appreciated and I hope no one thinks im asking to have my hand held here, but im at a loss. Just don't want to F my new phone when it arrives.
Thanks in advance for anyone who can help a fella out.
Click to expand...
Click to collapse
If I didn't get any point let me know.
Cheers
Sent from my XT910 using Tapatalk 2
Thank you. You hit the points. Much appreciated.
Sent from my Nexus S using xda premium
Hello Everyone, I have a question that might be a bit of a noob question.
Can I take a NANDROID back up from one photon (namely the System.img file) and flash it onto a different photon?
The reason I ask this is because the last time I bricked my photon I was unable to SBF back no matter what version I used. I tried everything and I eventually stumbled upon this thread http://forum.xda-developers.com/showthread.php?t=1798145 and was able to get my phone running again. However, my phone runs like absolute CRAP now. Its really embarassing when people see my phone struggle.
My brother has a photon too. Unrooted untouched fresh. I was hoping if i rooted his phone and made a NANDROID back up I could take the files and flash it onto mine and get back to a point where I atleast have a phone that works reasonably well.
Thank you,
-Jeff
What are you running now? System version, etc, etc.
And please look at the rules for posting. The development forum is not the place to be asking questions.
Sent from my MB855 using xda premium
I apologize for posting in the wrnog area.
I am running
Android 2.3.5
System Version: 45.4.13.MB855.Sprint.en.US
Build Number: 4.5.1A-1_SUN-254_13
fage88 said:
I apologize for posting in the wrnog area.
I am running
Android 2.3.5
System Version: 45.4.13.MB855.Sprint.en.US
Build Number: 4.5.1A-1_SUN-254_13
Click to expand...
Click to collapse
Imho, you'll be far better off flashing this: http://forum.xda-developers.com/showthread.php?t=1837757
Doing a nandroid restore probably works, but you really need to do that from the bootstrap recovery mod (again, imho).
Just go to the thread above, and if you have further questions, post there. I'll pick up any questions as I see them. If you're wondering, I use the SLIM ROm on my phone, Mof's work is beyond merely good.
Thank you tdhite. This ROM is the only one ive been able to flash!!! My phone is running much better
Dropped my hd2 at work, looked for a replacement phone at fry's Electronics
came across an Unbranded Carrier-Unlocked Atrix 4g said i want it.so i bought it.
I've searched high and low for resources to help me:
Root
flash recovery
flash rom.
At the moment I've managed to root using
superoneclick.
i keep reading about possibly bricking this phone,
which is why i wont continue on my own.
I'm looking for instructions,links, or how-to's.
I have looked at the stickies,
and its a cluster of confusion that doesn't help me what so ever.
Phone Information
------------------------------------------------------------------------------
System Information 45.31.0.MB860.AsiaRetail.en.03
Model Number MB860
Android Version 2.3.4
Baseband Version N_01.100.00R
Webtop WT-1.2.0-133_38
Kernel Version 2.6.32.9
[email protected] #3
APflex version
GAS_ASIA_USAOLYGBSEARET_P011
GAS_ASIA_USAOLYGBSEARET_A003
GAS_ASIA_USAOLYGBSEARET_M001
Build number 4.5.2a-74_OLE-31
-------------------------------------------------------------------------
Hi there, have a look here http://forum.xda-developers.com/showthread.php?t=1302423
I have an AT&T Atrix and this is the unlock/recovery I used and I'm still smiling
I know that it can be bricked, but I don't think many people do just take your time and read through (twice if you need to) and follow the instructions. I cant remember exactly what happened but I was scared at one stage but I carried on and all's well :good:
My Atrix isn't carrier branded, therefore I'm not sure what'd work for you will work for me.
I had already looked at that post, it offered no insight into my dilemma.
It doesn't specifically say it works on ALL atrix 4g variants which is why I'm seeking verification.
There are really only 3 variants of Atrix. And yes, this works on all of them that have an unlockable bootloader, regardless of the variant or firmware version.
Any such modification always carries with it certain risk though, so as always, do it at your own risk. What is already offered on the forum is pretty much all you are going to get, if you still don't feel comfortable with doing it, it's probably best if you leave it alone.