Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Staunch said:
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Click to expand...
Click to collapse
I may have missed something but i followed the steps to install gingerblur and well, it bricked my Telstra atrix that I only got yesterday
Luckily i made a backup of the telstra firmware as soon as i got it so its all good. Just got no idea on how to install CF. The telstra atrix i'm assuming is the same as the AT&T atrix because they are both "Motorola Atrix MB860" but i could be missing something
Uh oh, radio's and fingerprint reader aren't working
Oh, and it also wont turn itself off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Thanks
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
Click to expand...
Click to collapse
I had a really bad feeling that that would be the case. Bell users appear to have a limited range of options compaired to the AT&T users. Now it seems that the Telstra users will have even less options than the Bell users.
I have at least managed to load HeLauncher, Pyramid & Fancy widgets tonight and now I've have more of the options that I wanted from the HTC desire sense UI.
Still trying to work out how to get my hands on the widget/live weather wallpaper that has that Super Cool looking windscreen wiper that clears the rain away.... Any ideas on how to get ahold of it?
Thanks again.
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
y2whisper said:
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
Click to expand...
Click to collapse
My system version is;
Version.4.1.47,MB860.Telstra.en.AU
Thanks for the info, I will start looking for the other one on this site.
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
they should be able to flash using the gingerblur/greyblur guide by seven2009. you may not be able to deodex with the same instructions but installing should be fine, you would need to flash grey blur and factory reset the device before installing gingerblur.
If that route doesn't work you may need to start by flashing the french rom that is mentioned in that thread first.
makmegs said:
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
Click to expand...
Click to collapse
You are doing better than me so far, but I must admit that going for custom ROM's has me a bit worried. I flashed my Nokia 5800 and it was better for looks and customisation, but it crashed alot. Then I jail breaked my iSheep (iphone 3G) and that was a little better than stock iOS, but it also crashed alot too.
I am hesitant to play around too much with the Atrix, simply because it's so new, and I was patient enough to wait for the Telstra release (instead of an imported AT&T version). However I found this thread that may shed some light on the topic at hand.
http://forums.whirlpool.net.au/forum-replies.cfm?r=29747620#r29747620
User "LeChuck" has some great knowledge and info about this Telstra firmware.
I am just not adventurous enough at the moment to have a crack at it. All I need to do, is find out how I could hard reset back to stock firmware if I don't like mods, then i'll give it a go. Even since rooted it over the weekend, I've notice3d more little issues each day I play around with things.
Can it be "Un-rooted" (is that an actual term used???) back to standard?
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Click to expand...
Click to collapse
I have a buggy unlocked AT&T Atrix too and have been waiting for it to come out in OZ to flash it with either the Telstra Rom or something else. Can you (or anyone) make a suggestion?
procedure of installing custom rom
procedure of installing custom rom on atrix details are below.
system version: 45.0.20.mb860.telstra.en.au
model number:mb860
android versoin:2.3.4
basband version : N_01.100.00R
Webtop version: WT-1.20-133_23
Kernal version [email protected] #7
APflex version : GAS_Asia_usaolygbautel_p013,a012,m001
build number: 4.5.2A-74_OLE-20
shanitop_you said:
procedure of installing custom rom on atrix details are below.
Click to expand...
Click to collapse
You mean, you would like the procedure of installing a custom ROM on those specs? I would too.
It's mainly the BL unlock process I am not sure about on Telstra Atrix of the same spec. I'm comfortable with the rest.
Related
Ok, short and sweet.
Have a new Touch pro but its got the lousy Vodafone ROM on it. I want the default HTC ROM (black and white)
can someone post me the idiots guide (as i dont want to brick it) on how i acheive this. Assume i know nothing about updating ROMS....cos i dont!
thanks everyone
Darren.
hi got mine yesterday
first of i would make an image
http://forum.xda-developers.com/showthread.php?t=427507
although ive asked the author to make my raws into a bootable flash as i wasnt confident so we should have a chance of going back to vodafone stock is possible
then you need to consider hardspl
http://forum.xda-developers.com/showthread.php?t=410150
then a rom i really would recommend
http://forum.xda-developers.com/showthread.php?t=426099
all these answers come from this forum i would say do a bit of reading
also check out the wiki very useful
hth
thanks for the info...have you done yours yet?
yes the stock voda rom lasted 3 hours as i needed to charge it then i dumped the image hard spl then flahsed it and spent a little time setting the rom how i like it with a few extra programs
ive had a kaiser for a year now and work on a dialy basis with these phones
I had a quick look at the links...i dont even know what an "SPL" is....
is there anywhere that literally says..do this, then do that, then do this etc?
do you have the black and white HTC ROM now then, are there any quirks?
sorry to sound dumb but i have been waiting ages for this handset and dont want to brick it due to my lack of experience with flashing ROMS on phones.
thanks very much so far...
im running romeos as the link i sent u
its very good
there are instructions in the spl link i sent u on how to spl your device its quite easy:
Instructions:
1) download Hard-SPL package from attachment, extract to an empty folder. make sure it's launched from a local drive (not through network drive, etc.)
2) you must Have Phone Synced with PC in Windows Mobile!
3) run RaphaelHardSPL-Unsigned_190_1_3.exe,
4) follow steps in the RUU, check device for prompts after PC shows loading bar.
5) it should go to black screen now.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 1.90.OliNex.
Click to expand...
Click to collapse
as for the rom you mean the black and white one i dont know what this one is
darren.scott said:
I had a quick look at the links...i dont even know what an "SPL" is....
is there anywhere that literally says..do this, then do that, then do this etc?
do you have the black and white HTC ROM now then, are there any quirks?
sorry to sound dumb but i have been waiting ages for this handset and dont want to brick it due to my lack of experience with flashing ROMS on phones.
thanks very much so far...
Click to expand...
Click to collapse
Dear Darren,
What exactly is/are your question(s)?
You must be a bit more specific...
Cheers.
P.S. PM me with you MSN Messenger and i will help you online.
P.SII. PM stands for Private Message
thanks for the posts to date.
As for specifics i am looking for the default HTC ROM (no amendments or additional features etc) as the carrier's (Vodafone UK) one is "not pretty"
I dont know what an SPL or RRU is so was looking for a step by step instruction on how i do this including backing up my existing ROM in case i need to return to it for warranty etc.
The last post was very informative, and i will have a look at this but i was basically looking for any help i could get.
thanks
Darren.
spl:
http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
rru: (this is based on a different phone but much applies the same here)
http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
the link i gave u for dumping an image:
also contatins this link this looks like the stock rom ?
i have passed the raw files over to the jcespi2005 who very kindly is constructing them on this thread so we will have a back up of the voda stock rom
all you need to do is to read the hard spl link in this forum
this should be more than enough to get u going
can i ask why the stock rom? why not somethign better?
I ditched the Vodafone ROM sharpish @ the weekend.. Black & White and tons better now
Lots of very usefull information here, i will review and take the decision as to whether will do this or not. As for the question about the stock rom, this was purely the way it looked v's the vodafone rom. do the other roms have additional functionality then?
My Touch Pro should be here before the weekend from Vodafone. From looking around the forum this seems to be the latest stock HTC rom.
http://forum.xda-developers.com/showthread.php?t=418382
darren.scott said:
Ok, short and sweet.
Have a new Touch pro but its got the lousy Vodafone ROM on it. I want the default HTC ROM (black and white)
can someone post me the idiots guide (as i dont want to brick it) on how i acheive this. Assume i know nothing about updating ROMS....cos i dont!
thanks everyone
Darren.
Click to expand...
Click to collapse
Hi,
I am using the Vodafone UK ROM on my new Touch Pro and have installed .NET CF3.5 and Advanced Config 3.3 which has some handy performance tweaks.
Using Regedit I changed the registry as below...
HKEY Current User\software\microsoft\activesync
\Body truncation = 20480 decimal
(This prevents "TRUNCATED TEXT" in my contact notes)
Due to warranty issues and the time involved, I don’t want to flash a new ROM unless there are significant improvements. With the above tweaks I find my device runs well. What is it about the UK Vodafone ROM that you think is lousy?
Regards,
J
Hi i am interested as well to see if i can go to the original htc rom.first of all i tried installing the latest update from the htc site but my serial number wouldnt allow me to(i have vodafone branded)tried the update that a friend downloaded for his htc tp but it didnt work either.I am new at this and i dont know lots of things about flashing.utube application is a minus and maybe other stuff that i will find further down the road. if i do the above will i be able to update the rom (the one that the htc site gives) even if i use a friends of mine in the future?should i just sell this one and get a proper htc branded.thanks
There is no need to get rid of a branded phone and get a HTC branded one. they are the same phone in most cases. You just need to change the ROM. This is actualy easy to do. It sounds hard and there are alot of warnings, but dont worry, if you follow the instructions it is very simple. I have done it recently on a UK voda phone. The speed increase of the phone is amazing.
I would hartly recommend doing it.
@ Justin0679, the Voda rom was ok, but the speed of a new rom is a GREAT improvment. Makes it as responsive a a IPhone.
Any noobs have any questions I am more than happy to answer, as believe it or not, I was noe once, Well 2 weeks ago..........
Will i be able after i replace the vodafone rom with the htc to get the updates from the htc site(even if i have to wait for my friend to download it for his phone first).what are the steps?
Konstantinos21 said:
Will i be able after i replace the vodafone rom with the htc to get the updates from the htc site(even if i have to wait for my friend to download it for his phone first).what are the steps?
Click to expand...
Click to collapse
yes. just look on the site for the HTC rom. or try one of the many others that are out there.
Seen alot of blogs explaining how to update the android of Dell streak phones from AT&T and O2 but none for the Rogers with build number 7921.
Well i spent some time when i got my new phone to find out how to do it and to my surprise it was hard to find how to but easy to actually do it.
Only to follow 2 different site tutorials to get this done.
1. Follow the last part of the tutorial to get your streak to version 6601 ATT&T
after this phrase "If you just wanted to revert to O2 1.6 (build 4399) then you are done. If you are going to AT&T 1.6 (build 6601) we have to change the system so it will upgrade the the AT&T ROM."
http://forum.xda-developers.com/showthread.php?t=805112
once you got your streak to 1.6 ATT&T build 6601 you must follow a simple tutorial with interactive video and even has a video so you can make it work with your win7 X64 witch alot of tutorials don't help with.
2. Follow this part to the letter and if you have trouble they have a FAQ section and even supply all the files you need.
QDLTool Visual Tutorials (for Windows only)
http://streakdroid.com/?page_id=92
In this second part all you have to do in general is set up all your needed drivers and stuff in windows then open the program and press RUN. Just make sure you do all the steps without missing one.
No need to go through the fastboot or recovery menu in this part.
And it gives you Full US version of android 2.2 from a locked version of Rogers android 1.6.
Hope this will help my fellow Canadian Streakers
Thanks for Taking time to do this for fellow streakers
lufc said:
Thanks for Taking time to do this for fellow streakers
Click to expand...
Click to collapse
No problem. It's my first one ever so i hope i passed to hole point and helped some (dell irritated) people.
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
kantras said:
Actually, all you need is the 2nd step - QDLTool doesn't require any specific version installed on the phone.
Glad you like the visual tutorials .. let me know if theres anything I can do to improve them.
Click to expand...
Click to collapse
The only problem i have now is i can't seem to change or hear the notification when i go into the menu to see them.
Also i heard the gps doesn't work on some models but i haven't inserted the sim card because i'm waiting for the rebel to come in the mail but without the sim card the gps doesn't work for me.
The notifications setting and brightness are fixed in steves newest rom
Sent From My Rooted Dell Streak Using Xda App
ok i see i can upgrade to steve's 1.5.3 only thing is do i use the one with AMSS or the V2.1 baseband
I'm unlocking it with a Rebel simcard
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
alexmoi said:
In the guid (Beyond QDLTool) it says to use 1.5.3 + AMSS 1.5.1+. But i have read here and there that if your using the rebel simcard you have to use the No baseband one. So do i use the 1.5.3 no baseband and use the AMSS 1.5.1+ and follow all in the guide or do i juste use the 1.5.3 no baseband and skip the AMSS 1.5.1+ in the guide?
Click to expand...
Click to collapse
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Hey...I have the rogers streak and was wondering if I update to dj steve's custom rom will i run into issues when the actual Rogers 2.2 comes out? Will I be able to put the stock version back on? I am a bit worried for warranty purposes as well...can it be brought back to stock or is it a one way ticket? Reason I ask is I also have several phones including a Rogers Acer liquid e and unfortunetly can't go back to the stock version of froyo because of some thing Acer and Rogers did in the update that recognizes the fact my phone was rooted and not running a rogers baseband or something like that...I just sold my Galaxy s because I was sick of dealing with Samsung and their issues....So from what I can tell Rogers is only releasing the froyo update in late spring and 3-4 months is crazy considering most of the other countries already have froyo on their streaks...Man Rogers is so bad for their updates...Anyways...can i temporarily update to the leaked versions or should I wait? Thanks
maek_it_happen said:
im not 100% but i think you just need to flash the no baseband version thats it , you could ask that in the thread for that rom just to be certain
Click to expand...
Click to collapse
you are correct. if you want to use the rebelsim, you HAVE TO use the no baseband version. 1.5.3 is the latest version
thanks for the great guide, I just got mine today and its already running 2.2 on 318 baseband
its true that u can qdl from any version though so I went straight from 1.6 to 2.2 prerelease then to 318 using the link in the streakdroid guide for beyond qdl
Sent from my Dell Streak using XDA App
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Archeob said:
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
rptw said:
from what i understand, you need a launcher that can let you edit the number or rows and columns on each homescreen, im currently using launcher pro and have 8 columns and 6 rows in landscape. hope this helps as im a new user too so not sure if this is what you meant
Click to expand...
Click to collapse
You're exactly right. I spent an hour reinstalling StreakDroid 1.6.0 with different DPI settings before giving up in frustration, but I found the settings menu for ADW the next day. I used a 6 x 6 grid and disabled automatic stretching, and that way my picture frames look perfect.
Great work on the rom guys! My Streak feels much more smooth and responsive than under stock 1.6.
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Archeob said:
Thanks to the OP, I updated my Rogers Streak from stock 1.6 to 2.2 to StreakDroid 1.6 yesterday!
Despite my reservations, it couldn't have been easier. I used the QDLTool to jump from 1.6 to 2.2 directly, and I then followed the additional instructions on the StreakDroid site to flash the rom. The hardest part was installing ClockworkMod Recovery prior to all that to do a rom backup. For some reason it took many tries to get it to hold, but eventually it worked.
Unfortunately I may be in the minority but I dislike the new homescreen layout. I still haven't found a way to get icons and widgets to stay close together like they did in the stock 1.6 version.
Click to expand...
Click to collapse
Also check your density on the 1.6 streakdroid install. when i used us120 or denisty120- -160 they were to far apart. i also found that US180 didn't work the phone wouldn't boot. i had to use density180 vs us180 and everything is perfect. right amount of space. i installed just gingerbread stock launcher and im using the adw ex launcher its the best in my eyes.
cue_32 said:
Andy you shouldn't have a problem as long as you get a copy of the Update.pig you should be able to revert back.
Click to expand...
Click to collapse
Thanks...I still may wait though...I rooted my Acer liquid e and also just picked up a Samsung Captivate to play with and use as a back up..streak is so big...lol..nice to have a phone that fits in your pocket..... and since selling my GTi9000 i kind of missed it.....I love the streak and really don't want to void the warranty or better yet brick either...I am going to treat my captivate to the lagfix for now and maybe try gingerbread on my Liquid e...Been doing some reading and they are almost there...Still a few bugs however should not be long before they are worked out...As you probably noticed i love phones and have had like 30 phones in the last year...lol...Streak is my favorite so far...Have not touched my laptop much since i got it..Any news on when Rogers will come out with the official version of froyo? I read someone that April is the soonest? Anyone here anything else? I hope they come out with the update shortly ...otherwise I may be forced to root it...Any news would be appreciated..Cheers
umar.ranjha said:
Hi guys,
I guess i have bricked the device while updating to 2.2.
As far as i know i have done nothing wrong i followed the Guide step by Step and Downgrade to AT&T firmware as the first guide in this post.
While i was running QLDtool it errored out and Turned off by itself. After since i have tried everything and the Device just Doesn't have power anymore. Pluging into wall socket is not giving anything either.
Any thoughts on this?? Any Help will be appreciated.
Click to expand...
Click to collapse
Pull the battery out and put it back in.
If the streak looses power, it will be stuck in a power off state and plugging in the cord will do nothing.
After you reseated the battery, you should be able to charge the device again.
After it is charged, follow from where you left off.
Hi, I am totaly noob when it comes to flashing roms, etc. I read this forum from top to bottom, but can't find a direct answer to my question:
I have AT&T Atrix 4G : 4.5.91.MB860.en.US build 4.5.91
Android version: 2.3.4 Baseband ver: N_01.77.30P
It is rooted, don't know if it's bootloader is unlocked (when I hold power+vol down - I can see text "fastboot", but nothing about locking)
The more I read, the more I get confused..
I would like to remove AT&T ROM from it, bcs it lacks FM radio, and can't select 2G only (I need it when I go to place where 3g signal is weak - in my apartment, for example, I am not even US citizen, I brought the phone from US to EU on Telenor network - it is SIM unlocked ) Is there something like plain "vanilla" ROM, free of AT&T's clamps and cuffs ? I wouldn't like to have some Cyanogen Mods, or such - just plain, simple, factory default - generic kind of ROM on ATRIX 4G. I just want to DEBRAND it.
I saw on the noob sticky the whole procedure to flash a ROM, but I am confused in the part where "I must use AT&T for AT&T's US mobile phone" - I would end with the ATT's restrictions again ? What's the use of that ? Can someone pls point me what should I do ? ( and all that "do nots" 4.5.91 scare the hell out of me )
Sorry if this is misplaced, or stupid question, but there are a ton of subquestions in every thread, so I really got confused A BIG TIME No plain answer anywhere to be found...
gabelj said:
Hi, I am totaly noob when it comes to flashing roms, etc. I read this forum from top to bottom, but can't find a direct answer to my question:
I have AT&T Atrix 4G : 4.5.91.MB860.en.US build 4.5.91
Android version: 2.3.4 Baseband verL N_01.77.30P
It is rooted, don't know if it's bootloader is unlocked (when I hold power+vol down - I can see text "fastboot", but nothing about locking)
The more I read, the more I get confused..
I would like to remove AT&T ROM from it, bcs it lacks FM radio, and can't select 2G only (I need it when I go to place where 3g signal is weak - in my apartment, for example, I am not even US citizen, I brought the phone from US to EU on Telenor network - it is SIM unlocked ) Is there something like plain "vanilla" ROM, free of AT&T's clamps and cuffs ? I wouldn't like to have some Cyanogen Mods, or such - just plain, simple, factory default - generic kind of ROM on ATRIX 4G. I just want to DEBRAND it.
I saw on the noob sticky the whole procedure to flash a ROM, but I am confused in the part where "I must use AT&T for AT&T's US mobile phone" - I would end with the ATT's restrictions again ? What's the use of that ? Can someone pls point me what should I do ? ( and all that "do nots" 4.5.91 scares the hell out of me )
Sorry if this is misplaced, or stupid question, but there are a ton of subquestions in every thread, so I really got confused A BIG TIME No plain answer anywhere to be found...
Click to expand...
Click to collapse
Cyanogen mod is free of ATT branding and bloat my friend. But yeah u need to use a rom designed for US (ATT) Atrixes or Atrices ( lol however u say the plural)
Also, if you don't know if the bootloader is unlocked.. then it most likely isnt..
To tell, reboot the phone and look in the upper left hand corner. Unlocked devices will read "Unlocked"
Bender B. Rodgriguez said:
Cyanogen mod is free of ATT branding and bloat my friend. But yeah u need to use a rom designed for US (ATT) Atrixes or Atrices ( lol however u say the plural)
Click to expand...
Click to collapse
Damn... I don't want to test pre-beta releases of CM on this atrix... It should be done by someone who knows the stuff, anyway...
Bender B. Rodgriguez said:
Also, if you don't know if the bootloader is unlocked.. then it most likely isnt..
To tell, reboot the phone and look in the upper left hand corner. Unlocked devices will read "Unlocked"
Click to expand...
Click to collapse
I thought so... I saw it somewhere. But in a load of threads and answers, I got lost.
OK, thanks a lot for your answer... Can you recommend some less modded ROM without all AT&T's stuff, besides CM ? Something just slightly modded - with that 2G unlocked and FM enabled ?
Thanx to all who answer in advance...
gabelj said:
Damn... I don't want to test pre-beta releases of CM on this atrix... It should be done by someone who knows the stuff, anyway...
I thought so... I saw it somewhere. But in a load of threads and answers, I got lost.
OK, thanks a lot for your answer... Can you recommend some less modded ROM without all AT&T's stuff, besides CM ? Something just slightly modded - with that 2G unlocked and FM enabled ?
Thanx to all who answer in advance...
Click to expand...
Click to collapse
I think something like this may be what you are looking for .
http://forum.xda-developers.com/showthread.php?t=1242721
Havent tried it myself but the dev claims he tried to keep it as close to stock as possible minus all of the Motoblur bloat
Thanks man, I think that this is what I will flash onto my new ATRIX
Hi there,
I have an Atrix, carrier unlocked phone on the Rogers network running froyo. I would like to upgrade to the latest gingerbread firmware available on the Motorola website. I have a couple questions before I attempt this:
1. Dose it matter which carrier firmware I use, the AT&T or the Bell? If so how do I know which is the correct one to use? Since I bought the carrier unlocked phone off ebay it could be either an AT&T or a Bell.
2. Will the carrier unlock survive the firmware upgrade? Or am I going to have to get my hands on an other unlock code or something?
3. I am thinking about getting a dock so I can use the webtop thing. I have read that there is limits on the webtop based on your data plan. Is there something that needs to be modified to have this work or does the unlocked carrier bypass any of the these restrictions an allow the webtop to work?
Any help on this would be appreciated.
Thanks
74corvette said:
Hi there,
I have an Atrix, carrier unlocked phone on the Rogers network running froyo. I would like to upgrade to the latest gingerbread firmware available on the Motorola website. I have a couple questions before I attempt this:
1. Dose it matter which carrier firmware I use, the AT&T or the Bell? If so how do I know which is the correct one to use? Since I bought the carrier unlocked phone off ebay it could be either an AT&T or a Bell.
2. Will the carrier unlock survive the firmware upgrade? Or am I going to have to get my hands on an other unlock code or something?
3. I am thinking about getting a dock so I can use the webtop thing. I have read that there is limits on the webtop based on your data plan. Is there something that needs to be modified to have this work or does the unlocked carrier bypass any of the these restrictions an allow the webtop to work?
Any help on this would be appreciated.
Thanks
Click to expand...
Click to collapse
1) yes it matters. How did you plan on updating? To check what firmware you are on go to settings about phone
2)yes the unlock should survive it gas to do with the sim.
3)The limits for webtop have to do with AT&T and their limits on tethering
sent from my Atrix via XDA premium
Thanks for your response. As for the update I was planning on following the instructions on the Motorola website. Copy the firmware file to the SD card and then select system upgrade.
yeah i dont think that will be a problem, just check what firmware you have
BUT i would reccomend using a custom ROM
Reasons
-they are based off motorolas firmware and are very stable
-tweaked to give better performance
-are deodexed. meaning you can apply themes to your hearts content and really personalize your phone
Hi marko! thanks for your help on this. What rom would you recommend? I am looking for stability and speed, over themeing and customization.
74corvette said:
Hi marko! thanks for your help on this. What rom would you recommend? I am looking for stability and speed, over themeing and customization.
Click to expand...
Click to collapse
After having tried them all, Nottach's DarkSide is the fastest & most stable. Also ext4. Make sure you do a fastboot wipe before you install it so that you start on a clean system!
Happy flashing!
You don't have an update available via OTA yet?...
Sent from my MB860 using xda premium
So after doing some reading and poking around in the dev forum I think I am going to not bother with the stock Motorola firmware and go straight into a custom rom as you guys have suggested. I have a couple quick questions first, and would appreciate any guidance on the best, safest and easiest way to do this. I have read through the, noob and flashing threads but I can’t seem to find a definitive answer to this.
So since I am running stock froyo, is the install as simple as unlock bootloader, root phone and load on romracers CWM and flash away? Or do I need to worry about gingerbread bootloaders? My understanding is not all roms have bootloaders in them.
OR do I use RSD lite and loaded on the stock 2.3.4, unlocked .sbf file, root phone and load romracers CWM and flash. Which I think this method you can no longer go back to froyo, if need be for whatever reason.
I would prefer to keep the froyo option open, but I am not married to it. Plus I would prefer to do this not using RSD lite as I have had some bad experiences in the past flashing my Samsung cappy with the PC program odin.
Thanks again for your help.
Just order a new atrix 4G. I have looked at the possible ROM's to use and I want to try out the Neutrino ROM. I have rooted devices before but I am new to Motorola devices. Please help me find the CURRENT steps I need to take to get to be able to run the Neutrino ROM? I have used the search bar but a lot of the threads that I have found contain links that are no longer valid. Such as http://forum.xda-developers.com/showthread.php?t=1154600 Also I read a this link http://www.xda-developers.com/tag/motorola-atrix-4g/ which has me a worried that I may end up having an issue because all of the guides or seem to have been written before May 15th.
Thanks for taking a look and sorry if that was a little confusing I just didn't want to get flammed for being lazy. In the end I just want to know the most up to date way to get to the Neutrino ROM?? Below I will have included the specs. If I need to post anthing else please let me know
I recieved my phone last night and set it up on Striaght Talk.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model Number: MB860
Android Version: 2.3.4
Your help is GREATLY APPRIECIATED!!
Also on the youTube videos they all seem to say "DO NOT DO TRY TO UNLOCK OR ROOT IF YOU HAVE 2.3.4 OR IT WILL BRICK YOUR PHONE!!"
Is this still the case or has there been a work around for it yet??
you have to unlock bootloader, but you can get FAIL with last step.
If you will get fail - don't worry, you can still unlock it via fastboot (tested on mine INTL Atrix, but every phone is a little bit different)
flash recovery, wipe data, wipe cache, wipe dalvik, flash rom, flash gapps. Done
Thanks ovitz. Can you point me to a thread describing how to unlock the bootloader on this phone?? I can do all the other stuff that you said I need to do after the bootloader is unlocked(clearing and flashing). Just really dont want to mess up my phone. I got 2 actually one for my girlfriend as well. I have java and all SDK/ADB and all programs that I may need. Just want a step by step for comfort.
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
What is the other way (not using fastboot) to unlock this bootloader?? I tried fastboot oem unlock and got this message "INFOOEM unlock is not implemented"
Do I need to use an SBF with RSDlite or something to make this possible? If so please point me in the direction of that thread!?!
Thanks for anyone that can help
ravilov said:
Is the search not working for you?
http://cleanimport.xda/index.php?threads/1136261/
The thread is sticky even.
DISCLAIMER: I used this to unlock the BL on my Atrix, but mine is an older one, dating back to around Feb 2011. I do not know if this still works on brand new devices, however I am not aware of any other way to unlock (there probably isn't any other way really).
Click to expand...
Click to collapse
Sorry ravilov...Did not see your post as I had started a post and then ventured off to seach XDA and some other forums again as well. I have gotten to the link that you posted several times. I just saw that is was posted a long time ago and that there is a lot of things in that post that dont make too much sense to me.
First it says "All phones If you have unlocked then try to use 2.3.4 update zip from Motorola servers, then revert back to a "pre-unlock" version(1.8.3 or earlier on ATT) you will get bricked! Do not use the OTA via experimental servers and revert to older versions WITHOUT pudding preinstalled in your sbf. ATT ONLY Get your 1.8.3 with pudding from the pudding/unlocker section below."
Then shortly after is says "Disclaimer: Tested on 1.8.3 and 2.3.4 using sbf_flash and RSDLITE 5.3.1 or higher, usual warnings being responsible for your own actions yada yada"
So I dont really know if it works or not on the newer atrix's. I dont want to brick a brand new phone and I would just like to see that some one else has done it recently. So yes my eyes are open and search did work for me if you did not see the 2 other threads I mentioned. I just want something up to date, not from early 2011. If it can be confirmed that this works or If you know someone who has unlocked it recently, that would be great to hear from them.
Thanks for posting the link to that thread anyways though. Much apprieciated!
Can anyone tell me if the IHOP method to unlock bootloader will work with my phone?? I cant post in that thread because I do not have enough posts. Here are my specs so I could get some help with which patch to use with RSDlite.
System version: 45.31.0.MB860.AsiaRetail.en.03
Model number: MB860
Android version: 2.3.4
Baseband version: N_01.100.00R
Kernel version: 2.6.32.9
[email protected] #3
APflex version: GAS_ASIA_USAOLYGBSEART_P011
GAS_ASIA_USAOLYGBSEART_A003
GAS_ASIA_USAOLEMSEARET_M001
Build number: 4.5.2A-74_OLE-31
Something else I want to note is that it was bought on ebay as unlocked so I am assuming that is the radio. When I set up the APN for straight talk it did have the choices for AT&T US, AT&T US HSDPA, AT&T US Tether, AT&T US MMS. So this is why I am a little confused/scared as to which piece of pudding to use. It looks easy enough to unlock and clear the caches and flash the ROM I will want to use. Just would like to know which one to use.
Please, please somebody help!!:fingers-crossed:
Thanks you for taking a look to help. Much apprieciated!!!
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
das8nt said:
For a phone with the Asia Retail firmware, you'll want to use RSD Lite to flash the IHOP SBF. Your phone will likely enter a soft brick as stated above, just proceed with the unlock commands in fastboot from the error screen.
Since its an international phone, if you don't load a new ROM soon after unlocking then you'll need to flash the "RAMfix" from the Development section here. Most ROMs have that built in to the kernel, though, so it's not needed if you're going directly to a ROM.
In case you need it in the future, you might want to locate your stock SBF for Asia Retail and keep it on hand. If you see the Atrix Firmware Superthread in the Dev section, find the later Page that has new links to updated download sites. It's a post with a link to all Gingerbread firmwares and a link to all Froyo firmwares. Yours will have "searet" in the name. Make sure it's the same version, 2.3.4. Flashing anything older will brick you.
Good luck!
Sent from my MB865 Atrix 2 via Tapatalk 2
Click to expand...
Click to collapse
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Oregon2 said:
Awesome das8nt!! wish I could thank you more than once!!! I was just confused because it said asia in some spots but the APN's were for AT&T.
Click to expand...
Click to collapse
Quite welcome.
APNs are usually set by your SIM, if it's provisioned properly and the phone supports it.
Sent from my MB865 Atrix 2 via Tapatalk 2
Good to know About the APNs. Just to let you know I unlocked, rooted, and flashed the ROM the day you first replied. So I've been running with a new ROM for 3 days and the battery life is great!!
If anyone out there has installed the Neutrino ROM, I have one more question. On the Neurino ROM page it say to do these 2 steps:
"Then, after booting, click on script manager, navigate to /system/etc and run NitroCharger.sh as ROOT and at BOOT!
It is also HIGHLY recommended to download the GPS Mod found in #2. Then you're done."
I tried flashing the GPS mod but I keep gettng an error. Then on my first boot I tried going to /system/etc and from there I do not know where to locate NitroCharger to run it for either. Any help on these two issues would be great!! Also another thanks for everyone for taking a look and helping.
I would post in that thread but I still dont have enought posts.
You really need to reread the original Neutrino thread, since all of this has been answered countless times.
YOU DO NOT FLASH THE GPS MOD DIRECTLY. Open the ZIP and read the instructions.
NitroCharger is only available as an OTA update, but you might reconsider if you really want it since it's been known to cause issues.
Again, I know the thread is very large, but whatever questions or issues you might have, it's very likely answered there already.
Thanks you for just answering, even though you think I should just reread the thread. That answered my questions very fast. I will just not run Nitrocharger, I thought it may casue problems if I could not get it to run, instead you said it is the opposite. As for the GPS mod I just did open up the .zip and read the readme. I pulled out the United_States.zip
Can I just use CWM recovery to flash the US.zip now or do I have to clear all my caches and the likes beforehand?
I know your very busy and I apprieciate the time you take to just look at it.
I have just started my own business and it is going great!! but I have been working 14+ hour days with usually 9 hours hour doing very hard physical labor 6 days a week!! I need to hire more employees soon, lol. I read the whole IHOP thread from front to back and the Neutrino thread but I was very exhasted and stayed up until 330 in the morning doing it!! So again I thank you for taking your time I appriciate it very MUCH that you are helping me to have a fun android experiance and also to learn something new to me!!
Yes, you can just go ahead and flash United_States.zip. No need to clear anything.
Awesome your the MAN!! Thanks again :laugh: :good: