well i decided today to Flash a ROM on my HTC Fuze and was following all the steps but then an Error message popped up when I was running the ROM which states
ERROR [296]: UGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.
what is a NBF file? how do i get a newer NBF file?how do i upgrade the NBF file I have now?
Thank you in advance..
jigganotguilty said:
well i decided today to Flash a ROM on my HTC Fuze and was following all the steps but then an Error message popped up when I was running the ROM which states
ERROR [296]: UGRADE ONLY
This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.
what is a NBF file? how do i get a newer NBF file?how do i upgrade the NBF file I have now?
Thank you in advance..
Click to expand...
Click to collapse
Did you hard spl before flashing?
http://forum.xda-developers.com/showthread.php?t=410150
Otherwise try to download the package again and reflash.
EDIT:
Your error could also refer to a wrong RUU, try this custom RUU:
http://forum.xda-developers.com/showthread.php?t=410761
I did Hard Spl before i attempted to flash RC4 elite ROM...
jigganotguilty said:
I did Hard Spl before i attempted to flash RC4 elite ROM...
Click to expand...
Click to collapse
And you tried with a custom RUU?
Related
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
please help me!
A quick google search on the board returns THESE RESULTS. Or you could look at the spl downgrade guide HERE.
I'm having trouble downgrading too.
Following mrvanx's guide, I downgraded to Hard SPL 1.10 with no problem. But when I try to downgrade to either 1.04 or 1.06, I lose the ActiveSync connection, the phone never enters bootloader, and I get an error message from the RUU saying that the connection was lost.
After several hours trying everything I can think of, I'm officially stuck.
Any thoughts?
I had same problem yesterday. In CustomRUU you need to set Unsafe SPL it is the only solution for downgrading SPL. ATT: SPL 1.04.nbh
igord...
Thanks! That did the trick!
I am here to help,
Regards,
Igor
thanks!!!!!!!
igord said:
I had same problem yesterday. In CustomRUU you need to set Unsafe SPL it is the only solution for downgrading SPL. ATT: SPL 1.04.nbh
Click to expand...
Click to collapse
the file was broken, can u give me another link??
igord said:
I had same problem yesterday. In CustomRUU you need to set Unsafe SPL it is the only solution for downgrading SPL. ATT: SPL 1.04.nbh
Click to expand...
Click to collapse
I downloaded this file to my computer, but what is the next step? How can I run this .nbh file?
swacsa said:
I downloaded this file to my computer, but what is the next step? How can I run this .nbh file?
Click to expand...
Click to collapse
you need Custom RUU to run it , to download Custom RUU go to http://forum.xda-developers.com/showthread.php?t=298737
Hakim Rahman said:
you need Custom RUU to run it , to download Custom RUU go to http://forum.xda-developers.com/showthread.php?t=298737
Click to expand...
Click to collapse
I downloaed the Custom RRU file, but what is the next step?
(I copied the .nbh file as "RUU_signed.nbh" and the .exe file to the PDA, and I run it, but with the colored sreeen it freeze.)
Now can I run the ROM update?
swacsa said:
I downloaed the Custom RRU file, but what is the next step?
(I copied the .nbh file as "RUU_signed.nbh" and the .exe file to the PDA, and I run it, but with the colored sreeen it freeze.)
Now can I run the ROM update?
Click to expand...
Click to collapse
I got a HTC Touch Diamond 2, and it works on that...
I have got here an athena with AP 4.0 Rom. I am tryong to install the german tmobile stock rom. When i do this i get the error message "Found SPL v1.20" and "Download SPL before v3,03 is not allowed". I have found the SPL downgrader but this does not help me either. Is there anything i can do to fix this problem?
Thanks a lot!
dosada said:
I have got here an athena with AP 4.0 Rom. I am tryong to install the german tmobile stock rom. When i do this i get the error message "Found SPL v1.20" and "Download SPL before v3,03 is not allowed". I have found the SPL downgrader but this does not help me either. Is there anything i can do to fix this problem?
Thanks a lot!
Click to expand...
Click to collapse
Did you try this rom
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
from the wiki
here http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
it sounds like the file you are trying to load is an SPL 3.5 version
Hello,
yes, this is the ROM i am trying to flash onto my Athena but it ends with the error message. Not to sure how to fix this. As i said i have tried the spl downloader but this did not work either. Any ideas what else to try?
I have just had a look and the Athena shows SPL as 3.5 No idea how to check which version the Rom is. Any ideas what to do to get it to run?
lakeman said:
Did you try this rom
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
from the wiki
here http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
it sounds like the file you are trying to load is an SPL 3.5 version
Click to expand...
Click to collapse
OK , I think I had it back to front.(might be your language skills)
so!
You have AP4 SPL 3.5 !
In this case the downgrader should have worked if you followed the instructions on this page
http://forum.xda-developers.com/showthread.php?t=405604
I have done this and can vouch it worked.
Alternatively on this page http://forum.xda-developers.com/showthread.php?t=397518
there are a couple of german roms or you could try and alter Michys multilanguage rom
I used HardSPL successfully on a Wizard that was formerly:
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.21.2.8 GER
It's showing SPL 2.21.Olip, yet all my attempts to flash the phone with the Original T-Mobile USA Rom (RUU_TMobile_US_226102_22610105_022511_WWE_Ship) end up with errors.
If I use the RUU provided with the above ROM, it ends up with an Error 300 (Invalid Update Tool). Using SoftSPL or RUU MUN with the .nbf-file from that package both ends up with an Error 238 (File Read).
I just want to turn this T-Mobile Germany phone into one with the Original T-Mobile USA Rom so if anyone knows how to do this, solving the above problems, any help would be greatly appreciated.
Just to make sure, with an Original shipped Rom such as the T-Mobile USA one, I don't have to make sure to extract the provided IPL/SPL-files it contains before flashing on my G4, do I?
Scotty_73
try this:
Scotty_73 said:
I used HardSPL successfully on a Wizard that was formerly:
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.21.2.8 GER
It's showing SPL 2.21.Olip, yet all my attempts to flash the phone with the Original T-Mobile USA Rom (RUU_TMobile_US_226102_22610105_022511_WWE_Ship) end up with errors.
If I use the RUU provided with the above ROM, it ends up with an Error 300 (Invalid Update Tool). Using SoftSPL or RUU MUN with the .nbf-file from that package both ends up with an Error 238 (File Read).
I just want to turn this T-Mobile Germany phone into one with the Original T-Mobile USA Rom so if anyone knows how to do this, solving the above problems, any help would be greatly appreciated.
Just to make sure, with an Original shipped Rom such as the T-Mobile USA one, I don't have to make sure to extract the provided IPL/SPL-files it contains before flashing on my G4, do I?
Scotty_73
Click to expand...
Click to collapse
hello, sometimes the RUU is old, and is not possible to flash roms (because is ooold tool ok)
try downloading a newer RUU and copy the .NBF file in to the RUU folder, now you should be able to flash the ROM you have choosen to your WIZARD
GOOD LUCK!!!
tigrisimo said:
hello, sometimes the RUU is old, and is not possible to flash roms (because is ooold tool ok)
try downloading a newer RUU and copy the .NBF file in to the RUU folder, now you should be able to flash the ROM you have choosen to your WIZARD
GOOD LUCK!!!
Click to expand...
Click to collapse
Thanks for your advice but how could the RUU included in a rom package be outdated if it's specifically meant to be used to flash that rom? I did however follow your suggestion and tried several other RUU's as well, unsuccessfully unfortunately. I would expect the newest available T-Mobile USA Rom would have included the newest available RUU.
So, are there any other suggestions?
if you have a G4 use my setting... i used softspl & romupdatutility_noid...
i´ve uploadet it for you...
just copy in the nk.nbf in the folder and run START-sSPL.exe !
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore