help.... i flashed my new gene - P3400 ROM Development

i flashed my new gene
now i am at the tri colour screen
its showing ONBL 1.17.0000
SPL 1.10.Olip
when i give a click on Rom update Utility
its giving me ERROR [300] : INVALID UPDATE TOOL
please help me wat to do
its almost been a month, that my phone is not working

Follow krazy's thread, starting with the gene unbricker step.
you have only done 50% hspl, if you are sure your Gene is New

u can also use @fusioncoast
hi
just a suggestion Viabhav has provided a tool to chek if ur phone is old or new use it and he has also provided the HSPL tool also try it it will tell u wether ur phone is new or old
goodluck
fusioncoast said:
i flashed my new gene
now i am at the tri colour screen
its showing ONBL 1.17.0000
SPL 1.10.Olip
when i give a click on Rom update Utility
its giving me ERROR [300] : INVALID UPDATE TOOL
please help me wat to do
its almost been a month, that my phone is not working
Click to expand...
Click to collapse

now the phone does not reboot after updating Rom
i was successfull in updating the ROm, but after clicking finish....the phone should retart
but it does not restart
tried manual restarting.....
tried hard reset
nothing works
my phone is not booting up after updating the ROM

try this @fusioncoast
hi
try this
1.off the phone & take the battery out
2. press the power button on the phone for a few secs after removing battery
3.put battery back in the phone
4. press& hold camera button & then power button this will give u tricolor
use USB and Flash a new ROM
if ur sure ur SPL is .olip then Flash with old gene ROM or look in this same site besfen has also provided the orginal wm6 ROM u can also try the same
good luck
fusioncoast said:
i was successfull in updating the ROm, but after clicking finish....the phone should retart
but it does not restart
tried manual restarting.....
tried hard reset
nothing works
my phone is not booting up after updating the ROM
Click to expand...
Click to collapse

Related

GENE DEAD...

hi guys..
i hav a gene 100 or a p3400..
it went dead two days back as i was listening to music..i charged it up again but it just didnt start.. When i press the power button, the green light lights up and nothing else happens...
PLLLLSSSSS help......
gene
the gene doesnt even repond to the resets mentioned in the forum..
pls help me with any software or smthing..
plsss...
dead GENE- TRY THIS
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Tried it once...
hi bryan..
thnkx for ya reply but i'v already done that but got no responce..
Can i fix it by flashing or smthin??.. i'm new to these things ...
Can you explain to me ... to what extend the device is screwd.....
Another P3400i bricked
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
its isnt startin up
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
shahabaz said:
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
Click to expand...
Click to collapse
Your battery is finished. I started getting that when my charger got messed up and starts taking power out of the battery instead of putting it in. Take out the battery,put it back in, then plug it to your PC and leave it there for a while.
mailforkrishna said:
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
Click to expand...
Click to collapse
If your s\n starts with 814 - there is no solution now
Daemon_Hell said:
If your s\n starts with 814 - there is no solution now
Click to expand...
Click to collapse
no it is HT816FW01645 is there any hope
i have the same
my ht807
is it repaired ?
the same problem for me.
s/n start with HT829
any solution to recover?
to all p3400i guys
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
go4thoman said:
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
Click to expand...
Click to collapse
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
mailforkrishna said:
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
Click to expand...
Click to collapse
try to hard reset it and get the boot loader and flash with it the stock rom for p3400i i will give the link soon. my friend did it for me. then i send it to bangloure service centre, now waiting for their reply. They said that if we try to flash it our warranty will be void..... dont know what to do now.......
GENE 100 dead (stuck on bootloader)
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
If you have not completed 14 days after buying the device, just take it to HTC service center sying that your device is not booting. At least in my case, those guys couldn't figure out what is the cause (see how efficient they are ) and I got a replacement !
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
mGforCe said:
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
Click to expand...
Click to collapse
What is your serial, is it P3400i
basha said:
What is your serial, is it P3400i
Click to expand...
Click to collapse
Nope... its P3400 which came with WM 5.

Bricked Gene by hspl.exe

I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
First try to remove the battery and then put it back in and try to switch it on see if it boots into the windows...if not then follow the step given below...
Download any custom rom for OLD gene and run the rom update utility (RUU) it will be back to normal...
Note : Most importantly don't panic ...even if the phone is taking its usual time to boot up it may seem longer cos we are worried....have patience...
hay man
tell us the serial number of your device to tell you exactly what to do
is it (ht8xxx) or (ht7xxx) ?
it is very important
and for god's sake guys read the sticky threads first.
do not do anything before getting answers from other members.
Thanks guys, but I solve it already but I am not able to download any rom for my gene.
Can somebody give me another mirror apart from rapidshare and megaupload............. and which ROM is good, like with cube for my gene HTC 3400?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
Its normal thing that ur device got off after hspl.exe
it seems like u hv new gene....so now u should use Oref unbricker...
u just followed step 1....
so u should move on to step 2
which is unbricking gene by oref method
http://forum.xda-developers.com/showthread.php?t=472169
read this bro n follow instructions...
Thank you once again but I have solved my problem already. Now all I need is a new rom for my old gene.
Could anyone give me alternative mirror for any rom? Rapidshare and megaupload is not working for me.
Help - Gene stuck at boot loader after upgrading ROM 6.5
ONBL 1.07.0000
SPL 1.07.olip
GSM 02.79.90
OS 1.7.0.0
This happened when i upgraded the ROM from WM 6.1 to 6.5
Kindly help me how to restore my phone
same here
same happened to my Gene. I tried upgrading ROM to 6.5. after restart, it get struck on bootloader screen. it is not even detected by activsync

Help me please

I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse

P3400i(Gene100)bricked or suck bootloader mode

P3400i(Gene100) after flash bricked or suck bootloader mode
ROM file name RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship
how to solved plz help
or press on off key blink only keypad light
ok first find out if it is new gene or old . if it is new gene do a hardspl of oref , if it is old do a hard spl of olipro . u have to do this in bootloader mode . after flash ur cooked rom of old or new gene . do not upgrade ur gene with orginial rom like asia and all . u have to only put ur cooked rom or else u device again gets bricked . and ur orginal rom has spl and all so it had a chances to brick . hope u get the problem solved
rahmaneee said:
ok first find out if it is new gene or old . if it is new gene do a hardspl of oref , if it is old do a hard spl of olipro . u have to do this in bootloader mode . after flash ur cooked rom of old or new gene . do not upgrade ur gene with orginial rom like asia and all . u have to only put ur cooked rom or else u device again gets bricked . and ur orginal rom has spl and all so it had a chances to brick . hope u get the problem solved
Click to expand...
Click to collapse
how can i find out it is old or new Gene...........?
There are many ways to find out about gene that is old or new , if ur gene is shipped with orginal wm6 it is a new gene and if it is wm5 it is a old gene . Anyway another good method it hardspl loipro and install cooked room ... If it sucuessfully went inside the os it is old gene and if it again stucks in boot screen ... U need hardspl oref and to update new gene roms .. Thats all the way we can find out about old and new gene
rahmaneee said:
if ur gene is shipped with orginal wm6 it is a new gene and if it is wm5 it is a old gene .
Click to expand...
Click to collapse
no this is not the right way to identify them, one of my friend's GENE came with WM5 with sr no starting from HT8 series and it is a new GENE
one of my friend's GENE came with WM5 with sr no HT7 and it was also a new GENE.
The only way to identify it correctly before bricking is the SPL date method.
See my Sign for the tool to identify the Old-New GENE...(SPLCHK)
But this tool only works if ur device is in alive condition...
before flash my GENE(P3400i) Rom Version 1.17.720.1_4.1.13.34_02.79.90
use same version to flash my gene RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship this file n full flash dead my Gene no bootloader suck screen any option to back my GENE Normal .............?...
dude remove ur battery and put it again and then press the camera button and then power button to enter bootloader mode .
rahmaneee said:
dude remove ur battery and put it again and then press the camera button and then power button to enter bootloader mode .
Click to expand...
Click to collapse
also try this same problem only key pad light blink
@ Okay so lets start it afresh, first tell me from where did you download the ship rom you flashed, if it was posted on the forum than that would be a old gene rom as there is no ship rom for new gene available in the forum, this could help in knowing if your device is new or old.
Regds,
harry_01 said:
also try this same problem only key pad light blink
Click to expand...
Click to collapse
remove the battery for 20 seconds and press power button for 5 seconds then put in the battery again and then press and hold the camera button and then press the power button(camera button should be kept pressed at this moment) to enter bootloader mode .
vaibhav_batra_the_techguy said:
remove the battery for 20 seconds and press power button for 5 seconds then put in the battery again and then press and hold the camera button and then press the power button(camera button should be kept pressed at this moment) to enter bootloader mode .
Click to expand...
Click to collapse
and in some cases (like mine), you need to soft reset instead of pressing power button.
coolaj said:
@ Okay so lets start it afresh, first tell me from where did you download the ship rom you flashed, if it was posted on the forum than that would be a old gene rom as there is no ship rom for new gene available in the forum, this could help in knowing if your device is new or old.
Regds,
Click to expand...
Click to collapse
this rom download on this forum RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship
or flash time show replace old version 1.17.720.1_4.1.13.34 to new version 1.17.720.1_4.1.13.34 mean same full 100% flash but after full flash set dead my bad luck
can you tell which thread you got the link, or do one thing there is a stick thread in the forum as 'how to cook for gene' there are tools to download, now download the tools and follow the instructions to extract the rom which you downloaded there will be a spl.nb file extracted forom the nbh file, open the spl.nb file in a notepad and search for bootloader date if it is 12th march then its a old gene rom, this will mean that you have a new gene.do this much and reply.
EDIT: once you are confirmed that you have a new gene you can try the Orefkof Unbricker for new gene, you will find it here http://forum.xda-developers.com/showthread.php?t=472169. just follow the steps for recovering your device via Orefkov Method.I am 100% sure your device is New Gene but you have do the above steps to be 101% sure.
Attaching Nbhextract no need to download tools
coolaj said:
can you tell which thread you got the link, or do one thing there is a stick thread in the forum as 'how to cook for gene' there are tools to download, now download the tools and follow the instructions to extract the rom which you downloaded there will be a spl.nb file extracted forom the nbh file, open the spl.nb file in a notepad and search for bootloader date if it is 12th march then its a old gene rom, this will mean that you have a new gene.do this much and reply.
EDIT: once you are confirmed that you have a new gene you can try the Orefkof Unbricker for new gene, you will find it here http://forum.xda-developers.com/showthread.php?t=472169. just follow the steps for recovering your device via Orefkov Method.I am 100% sure your device is New Gene but you have do the above steps to be 101% sure.
Click to expand...
Click to collapse
this rom download on this page
http://forum.xda-developers.com/showthread.php?t=396744
harry_01 said:
this rom download on this page
http://forum.xda-developers.com/showthread.php?t=396744
Click to expand...
Click to collapse
This is a old gene rom, did you tried the above steps i told
coolaj said:
This is a old gene rom, did you tried the above steps i told
Click to expand...
Click to collapse
Tried with step 5 using Orifkov method but unable to go to Bootloader mode, tried several times. Unable to detect USB Mode Pls Help.
Read the instructions carefully and follow each and every step as said, for entering in bootloadeer hold camera button and use stylus to press the reset button which is next to the charging base, if you are using vista then follow the instruction to update the usb drivers as it is stated in the thread it wiill detect the usb
once you are done with orefkov method your device will be stuck at a white screen with htc logo and ipl,spl,radio,os details spl should be 1.07.oref now dont worry and just download a new gene rom from this forum and flash it your device will work fine,and do not try to update the Spl again.
regds,

[Q][HELP] my Gene is dead (3 color screen problem)

hi all
i try to Upgrade my gene to official ROM but this installed to 2% and restart then
my gene showing
3 Color screen
and this msg
ONBL...............
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
And in the white band RE-FORMATTING OK!
pls help me to fix it
also i try to install other ROMs but they all not work .
up
light25360 said:
hi all
i try to Upgrade my gene to official ROM but this installed to 2% and restart then
my gene showing
3 Color screen
and this msg
ONBL...............
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
And in the white band RE-FORMATTING OK!
pls help me to fix it
also i try to install other ROMs but they all not work .
Click to expand...
Click to collapse
Any official ROM can not be flashed directly you must go through this process
http://forum.xda-developers.com/showthread.php?t=506467
You must remove spl.nb,gsm.nb and other .nb files but not os.nb because they will mess up with your device's spl and bricks it.
Since you have already flashed this ROM, unfortunately you've bricked your device.......
So, i would suggest you to patch your SPL via this guide http://forum.xda-developers.com/showthread.php?t=472169 and then try to flash custom made ROMs.
Other way is to remove that bad flashed spl.nb file but don't know the method to do it....
I have always used the Orefkov method for flash it but This time my downloaded ROM was a Installation file and i dont use orefkov method just Got connected to usb and run this file but after 2% my gene restarted and Revealed this msg :
ONBL
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
RE-FORMATTING OK!
I also downloaded this ROM from shiped ROm site
How can I repair this
pls help me bro
light25360 said:
I have always used the Orefkov method for flash it but This time my downloaded ROM was a Installation file and i dont use orefkov method just Got connected to usb and run this file but after 2% my gene restarted and Revealed this msg :
ONBL
SPL 1.28.0000
DONT POWER OFF!
PLS .UPADTE NEW IMAGE NOW!
RE-FORMATTING OK!
I also downloaded this ROM from shiped ROm site
How can I repair this
pls help me bro
Click to expand...
Click to collapse
I don't know what to do now.....
But what about this??
GENE J-TAG Restore
ok I did not try JTAG Method but tnx for your help dear mr.harsh .
I would try this method and I will say results in this thread
also sry for my bad eng

Categories

Resources