he,
i'm just starting to update my rom versions of my qtek 2020(xda II)
furst i updated from a 1.72 wwe to the 1.75 from qtek self (http://www.qtek.nl/2020_updates.asp) than i updated to the wm6.1.2aR16.P32_public rom from
C_Shekhar and after that update it tryed to sync a couple times and gave the error you need ActiveSync 4.5(I all ready had it installed)
now it isn't trying to sync at all, i also can't juse my flashcard
please I need help.
thanks
I had the same problem. I tried everything - without succdess.
The only thing that helped: (surprise!)
reinstallation of active sync! (setup/repair)
now it's working fine.
Related
I am trying to upgrade the ROM on my XDAII on advice from 02 - but i cant get it to install! It gets past the release notes and then errors. The error code is 011, saying that it cannot get a connection to the device. This is strange because i can syncronise everything on the phone and even browse its contents directly before and directly after the error!
Help!
I am running win XP Pro SP2 with the following on my XDA2....
XDAII
1.66.00 WWE
1.10.00
hi there,
It sounds like you may still have active sync running. Ensure it is switched off completeley by doing the contr/Alt/delete thingy.
Hope this helps
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Here's the deal: I need help!!!!!!
I have a HTC TYTN and upgraded it's ROM from WM5 to Custels Ultimate WM6 as he got a lot of good reviews for it. However, there's a bug in it - apparently a bug Mr. Custel was aware of. After upgrading to WM6 my Active sync does no longer work when using USB.
Here's my details:
HERM200
spl-2.10 Olipro
IPL-1.04
Windows Mobile 6 Professional
CE OS 5.2.1238 (Build 17745.0.2.3)
ROM Version: CUSTEL Ultimate
ROM Date: 05/05/07
Radio version: 1.41.00.10
Protocol version: 32.74.7020.18H
I run Active sync 4.5 on my PC.
I have checked that the setting for Active sync is correct on my computer and that the 'Enable advanced network functionality' box is unchecked in the USB-to-Pc setting on my TYTN
I have tried to manually put my TYTN into Bootload to see if it can connect via USB then - and it cannot even if it says USB on my TYTN tricolor screen.
I've deactivated firewall, checked to see if settings for Outlook is correct etc... etc...
I've even tried to put a .nbh file on my SD card and put TYTN into Bootload mode - but it never got past the tricolor screen.....
In other word: I cannot connect my TYTN to my PC and I cannot flash another ROM onto my TYTN to make it work properly with Active sync.
What can I do? Any ideas would be appreciated.
Regards,
Njål
I will try
Well I had the same problem with active sync when I installed wm6 on my cingular 8525 (hermes). Once I figured out to remove the check in the USB to PC window, I removed activesync 4.5 and restarted my pc. Then I reinstalled activesync. I then restarted my pc. I then hooked the usb cable from the cradle that my phone sits in and then placed the phone in the cradle. Everything has worked fine since then. I know for sure that check in USB to PC has to be unchecked. It will not work unless. So try that and see what happens. That is what I had to do. It would not work until I unistalled and reinstalled activesync. Hope this helps.
A little more info:
Here's a little more info when it comes to my problem.
I've read the thread regarding Mr Custel's WM6 Final ROM and after I upgraded my phone, several others has complained about the same problem as I have.
Mr Custel has written that he's aware of the problem and that he will fix it - however, I now see a new ROM upgrade from Mr Custel called Custels Ultimate WM6 ROM. The problem is that I cannot install it since I cannot get an USB connection to work.
I've tried uninstalling Active sync - restart PC - reinstall active sync - restart PC and try to connect. Several times, actually. It doesn't work
Any ideas?
Regards, Njål
i have this problem.
While trying to flash Charmer_Touch_ver._2.1
i get the following error message
Could not update itsutils.dll to the current version, maybe it is in use? try restarting your device, or restart activesync.
after doing a hard reset the software is still WM5
My current version is the latest ROM from T-mobile UK site
Any advice on this please
copy cert_spcs.cab and enablerapi.cab to your charmer, install them to device memory. Run the upgrade again.
Thanks
Installing these files worked
Another happy customer
after a little bit of cadgouling - i have sorted out my friends charmer
works a treat !
thanx a bunch again
sonix
Hello everybody...
I just bought an PM200 (German T-Mobile Edition), WM5 says its a PM200.
After that I installed the aku 3.3 and everything worked fine...
Then I tried to install the "Charmer_Touch_GER_Ridingshark_Beta_3.2".
But while Writing the new TouchFLOW OS ROM i got the error... "Could not update itsutils.dll to the current version, maybe it is in use?
try restarting your device, or restart activesync
But i realized it to late and already made a Hard Reset...
Then the Touch-Flow UI tried to install and the i got the WM error:
"The file : \windows\XDADev_BatFix.exe does not exist".
But i cant go on with the install but it doesnt matter which button i push...no one responds...
Then i downloaded the XDADEV_Batfix.cab but that dowsnt work...sure because it isnt the exe file...
Can anybody help me with tha prob?
I also treid to install the WM6 update again but i always get the itsutils.dll error...
Geetings to all
Markus
Here is how to do it:
Flash back to WM5 using bootloader. Press camera button during reset.
If you see the screen with the 3 colours plug in the USB cable and wait till the Device is installed. Now run the T-Mobile uptade (Best is to use Akku3.3).
After it is finished connect to active sync and go to the Folder were the WM 6 upgrade is in. Now install the two cabs out of the folder where the WM6 ROM is in, on your device and make a soft reset. After that run the upgrade File. It will go same as before, but there will be no error and it will update completly.
Have a nice time with WM6
ChrBeck
Can i writ you a pm, it will be much better for me to write you in german...
In der PM in Deutsch geantwortet.
Answered in German in a PM.
Ok, the prob is solved.
I just want to write it down here, if anybody has the same prob...
Thanks again to ChrBeck, I also used the search in this Forum to get it solved but i could find anything useful.
The only thing I had to do was to install the to cab´s (Cert_SPCS.cab and EnableRapi.cab witch are already included in the Charmer_Touch_GER_Ridingshark_Beta_3.2.rar.
The first Step was to update the WM5 Version to the aku 3.3. Then I transmitted the 2 Files with activeSync and installed them on the Charmer just with thip on each File. And the last Step was to flash the new WM6...
DONE....
Its so easy if you know what to do and with help from some users...
Greetings MArkus
This is the thing I have written before. But it is not easy to understand, if you don't know much about it.
@all: And now much fun with WM.
Have a nice day
ChrBeck