Hi guys,
got, I think, some SW problem with my rose.
Sometimes, (usually if have no time), device will instantly going off, if I close qwerty keyboard.
It happends only if there is an job to do.
(Pigeon, messages, email, browser)
I slide keyboard in, and device is imidietly powered off.
Power button will power on device - absolutly normally.
If I try open and close device in home screen in idle - nothing happeng, everything works fine.
Seem's not to be a HW issue, because I try to close it very fastly a few time - again, not problem.
Typically situation - got opened qwerty, typing @ icq, closing keyboard - device go power down.
thank for any ideas
System info:
CE 5.2.20279
build 20279.1.3.4
radio 12.23.30.06H_0.24.30.24
Device is in Czech lang
just to tell it happened to me a couple of times... ;-(
darioporru said:
just to tell it happened to me a couple of times... ;-(
Click to expand...
Click to collapse
What you think about it ? SW or HW issue ?
darioporru said:
just to tell it happened to me a couple of times... ;-(
Click to expand...
Click to collapse
It happened to me too, but not since the last hard reset. So, I'd say that it may be a SW issue.
Thx guys !
Hi all,
I have a problem similar to cz_ivan, with the difference that always I slide too hard the keyboard (open/close), the device die.
I've seen that if its AC charger is plugged the device never switch off on slide closing...
Could you try to close your Rose with the power plugged and say me what happens?
Thank you in advance!!
Py
hmpf,
now i try very hard opening / closeing keyboard with / without charger
No problem with device on charger !!!
Seems to be an battery contact - I'll try to fix it when have some time to it.
Then I send report
Related
Hello,
here is a list of bugs discovered in new Android 2.1 (Nordic), build 2.0.A.0.504.
Please add your discovered bugs to have it all in one thread + of course
solutions/workarounds to solve those bugs:
- Wisepilot will hangs with "Validating Internet settings" message
+ started working 03.11.2010 for no reason, maybe license has been activated on Wisepilot side?
- Power Control widget don't really disable "Background data" transfer as before
+ workaround: it's a feature, disable "Background data" in Settings - "Accounts & sync" menu
- If phone is powered off and is charging, screen with battery icon is always ON + display back-light is active all the time...
+ workaround: power ON phone during the charging and put it into the Sleep with Power button, display will be OFF then
- After phone is charged, green led stay lighting even is disconnected from the charger
(it happen sometimes)
i can't use usb link with my pc...
phone just reboot each time gets connected with windows so it's impossible for me to transfer apps on my SD in this way...
anyone else has this issue?
stillka said:
- If phone is sleeping, can't wake-up with Menu button (left button)
Click to expand...
Click to collapse
The "wake-up" button is just replaced by the middle button, as I see it!?
That is not a "bug" IMO, just a change in layout
acemadmav said:
i can't use usb link with my pc...
phone just reboot each time gets connected with windows so it's impossible for me to transfer apps on my SD in this way...
anyone else has this issue?
Click to expand...
Click to collapse
I don't have this problem, try connect phone to different computer. Maybe factory reset of phone will help..
-Buggi- said:
The "wake-up" button is just replaced by the middle button, as I see it!?
That is not a "bug" IMO, just a change in layout
Click to expand...
Click to collapse
Yes, it's a feature...
Could somebody test if Wisepilot is working for him?
When I scroll through the widgets a bit, I suddenly get the "add widget" screen.
I've just installed the Helix launcher. Much better than the standard X10mini home app.
stillka said:
Could somebody test if Wisepilot is working for him?
Click to expand...
Click to collapse
Mine says that my internet configuraion is not correct for Wisepilot. So it doesn't work for me too.
*Gallery too slow
* USB diconnecting with the slightest movement
* Anybody had a charging problem... its just stops charging but the led light still shows charging
Points to note -
The menu key unlock is not a bug
You can install the 3D gallery , its much faster
SKaTaNtje said:
Mine says that my internet configuraion is not correct for Wisepilot. So it doesn't work for me too.
Click to expand...
Click to collapse
Yes, I also get this message, or it just hangs, so this bug is confirmed :-(
While charging via pc, the lockscreent lights up sometimes and changes the progress from 100% (full) to 99% (while still connected).
I haven't tested this with the AC charger yet.
This could be very annoying if it lights up my bedroom while I charge my phone at night.
siddharthsai said:
*Gallery too slow
* USB diconnecting with the slightest movement
* Anybody had a charging problem... its just stops charging but the led light still shows charging
Points to note -
The menu key unlock is not a bug
You can install the 3D gallery , its much faster
Click to expand...
Click to collapse
I can confirm this charging bug, led is green even I disconnect phone from charger... I will put it to my first post...
SKaTaNtje said:
Mine says that my internet configuraion is not correct for Wisepilot. So it doesn't work for me too.
Click to expand...
Click to collapse
Hi there, same problem with Wisepilot,
No problems with usb connections and battery charge.
stillka said:
I don't have this problem, try connect phone to different computer. Maybe factory reset of phone will help..
Click to expand...
Click to collapse
i used backup and restore with previous fw upgrade...now i repeated without restorinf data and seems fine;
probably backups made with 1.6 version of the fw are incompatible with the new one...
webbear said:
Hi there, same problem with Wisepilot,
No problems with usb connections and battery charge.
Click to expand...
Click to collapse
It happen to me, after phone has been charged for 100% and green led light, after cable disconnect led stay on... Now I am charging again so I'll test it...
acemadmav said:
i used backup and restore with previous fw upgrade...now i repeated without restorinf data and seems fine;
probably backups made with 1.6 version of the fw are incompatible with the new one...
Click to expand...
Click to collapse
Good, probably it's an incompatibility of backups..
Google Talk seems to be slow at receiving messages. Sometimes I recieve a couple messages at a time from one person.
SKaTaNtje said:
Google Talk seems to be slow at receiving messages. Sometimes I recieve a couple messages at a time from one person.
Click to expand...
Click to collapse
It could depend from your internet connection quality...I will test it.
I experience that the phone reboots sporadic when is´s connected to the PC via USB.
There dons´t seems to be any pattern in, when and why?
Led not blinking
I have a problem with no led blinking after receiving sms (using a handcent sms).
Led is not working, anybody else have the same?
and now i see...i don't see voice search .. ok we can download from market and voice search works
Hi,
I've been installing and testing various ROMs for my T-Mobile Leo (HD2) before and never had any problems until now. Problem is, after the last flash, I noticed the phone doesn't vibrate any more, I've checked all the settings and even turned vibrate on/off, nothing helps. Also, if I long press the end key to shutdown the phone, it freezes, I then have to press end to lock, wait about 30 seconds then unlock to be able to use again. Important to note, when the phone freezes, only the touch screen freezes, the buttons continue to work, and I can even call the last party or answer/end calls.
I flashed some older firmwares that I used to use that used to work, but these problems still persist.
Is there any way I can diagnose the phone hardware completely? Any program or tool? I live in Guyana, South America so taking it to a repair centre is not an option, basically, I have to fix it myself.
Did I post this in the wrong thread/forum? Why and I not getting any help?
I'm still having this problem and need help! Somebody... any suggestions???
Notorious_PDR said:
I'm still having this problem and need help! Somebody... any suggestions???
Click to expand...
Click to collapse
Mate, honestly, I never notice that it would vibrate on long pressing
As long as your phone is working, then you shouldnt worry about it.
Or else, you can try to restore to original stock rom and see if this is due to hardware problem or software problem
I don't mean that it vibrates on long press. I said that it has stopped vibrating AT ALL!
In addition to that, the phone freezes alot, especially when I long press the end key. It is behaving like a hardware problem, that's why I'm asking about diagnostics for the HD2.
I dont think its anything to do with the rom. I had the same problem with mine, what happens is the flash lens gets pushed inside and stops the vibrator from rotating. Just check the lens if u see it pressed, its an easy fix if u know how to take the phone apart. For instruction check out youtube. I hope this helps.
silverwind said:
Mate, honestly, I never notice that it would vibrate on long pressing
As long as your phone is working, then you shouldnt worry about it.
Or else, you can try to restore to original stock rom and see if this is due to hardware problem or software problem
Click to expand...
Click to collapse
You should probably read back my post... I said the phone stop vibrating... not that it stop vibrating on long end press... It also freezes when I long end press... Hence, the reason I asked for any diagnostics for the HD2 as I suspect it may be hardware related...
gurkhali1 said:
I dont think its anything to do with the rom. I had the same problem with mine, what happens is the flash lens gets pushed inside and stops the vibrator from rotating. Just check the lens if u see it pressed, its an easy fix if u know how to take the phone apart. For instruction check out youtube. I hope this helps.
Click to expand...
Click to collapse
This actually seems to be the problem, I will open the phone and check... Thank you so much for your suggestion, I followed this suggestion, and now the touch screen is not working... but the phone is vibrating again. Any ideas what I will have to change now?
Here is the problem...
Both when long pressing power button - and short pressing + taping on a POWER OFF button - the phone doesn't turn off It just shuts down, vibrates and then restarts. Didnt have this problem before - just noticed it today.
I use official I9100XXKE4 rom - never rooted the phone and never used any custom ROMs.
Any idea what causes the problem ?
cryanpl said:
Here is the problem...
Both when long pressing power button - YES thats how you reboot SGS.
Short press = screen off
Hold power button down OFF screen displays
You can always try factory reset and wipe data if you think you have a problem .
jje
Click to expand...
Click to collapse
Just hard formated the phone using *2767*3855# method
(WARNING - THIS CODE FORMATS YOUR PHONE AND ERASES ALL DATA)
... and nothing still reboots instead of turning off.
I just long press the power button - wait for the menu to appear - the tap on a POWER OFF text - the phone informs me that this will Turn Off the phone - I tap on OK - and ... it doesn't turn off - but jus restarts.
Very strange I am on a train right now - and wanted to save sme battery for the final part of the trip - but looks like because of this problem - I am not able to turn off the device. OK - i phisically removed the battery - but it's not the solution of the problem for future I guess
Return to seller its not normal .
jje
I know exactly what you mean. I had this issue amongst a list of others and it was really ****ing me off. After i updated to ke7 it was still the same. I have a bluteooth issue so installed Villain ROM 1.1 - That sorted the problem. The phone turns off and on like normal but still have the bluetooth issue.
I dont think you should return it until the new firmware is out
soved
Hi, I had the same problem too, the details:
1. I have never used a different ROM than the original.
2. I haven’t upgraded the original firmware.
3. When the problem happened I haven’t installed any software (recently)
4. This is not a software problem definitely
5. The problem began when I have finished charging the phone (the phone was turned off), I disconnected it from the AC Charger and it began to show the battery icon like if it was charging and a yellow triangle advertising that the charger doesn’t have the sufficient power to charge. Then I tried turning on the phone (it was really difficult to turn it on), when I finally turned it on I noticed some problems with the data network (really annoying), when I tried to turn off the phone, it begun to restart instead turning off.
6. I have been goggling since then, only one thing solved the problem is to clean the USB PHONE connector (I used a small clip to clean), there is something unclean (I can´t see, it’s something very little) yet but the problem has gone, all is normal now.
7. In a youtube video, someone has a comment that says: “I had to turn it in to the local samsung service location. They told me that it was corrosion in the USB port due to water damage. They charged me €70, and I'll pick it up tommorow.” This confirms the problem.
I am thinking that the USB connectors come with this problem, so we have to be very careful at the moment of charging the phone, maybe we should plug the charger to the phone before connecting it to the AC power.
Sorry for my english (it's not good)
freddysalazar:
first post. i rarely post, but wow, that solved it. it must be hardware related. i took a cotton cleaner(or what it is called) and cleaned it and it solved the problem. will not have the charger by my bedroom windows during snowy winter anymore. moved it to my dry livingroom
Hi ,
My Omate Trusmart ( US 1/8 GB) suddenly stops responding ( Black screen). It stays the same until i pull off the battery.
I did factory reset it couple of times but still the problem persists. Any one else faced this issue , whats the solution ?
sudhanpsg said:
Hi ,
My Omate Trusmart ( US 1/8 GB) suddenly stops responding ( Black screen). It stays the same until i pull off the battery.
I did factory reset it couple of times but still the problem persists. Any one else faced this issue , whats the solution ?
Click to expand...
Click to collapse
Your battery is most likely exhausted. Have you tried charging it up?
sudhanpsg said:
Hi ,
My Omate Trusmart ( US 1/8 GB) suddenly stops responding ( Black screen). It stays the same until i pull off the battery.
I did factory reset it couple of times but still the problem persists. Any one else faced this issue , whats the solution ?
Click to expand...
Click to collapse
Known issue - random black screen of death. I've only had it happen once. You can clear it with adb reboot, I think.
I disabled quick boot after it happened, it's not happened again, but peopel say this isn't a fix.
Thanks.. adb reboot is better than pulling off the battery.May i need to develop some app that would listen to a long key press of power button and restart the watch.
tshoulihane said:
Known issue - random black screen of death. I've only had it happen once. You can clear it with adb reboot, I think.
I disabled quick boot after it happened, it's not happened again, but peopel say this isn't a fix.
Click to expand...
Click to collapse
sudhanpsg said:
May i need to develop some app that would listen to a long key press of power button and restart the watch.
Click to expand...
Click to collapse
Added to Xposed Additions, both my mod (link in general) and official. (Not sure if it works, have not seen the black screen when I have used this.)
I developed a app that takes a phone no as input.If your watch blacks out , then you call your watch from this phone no and that should restart your omate.
http..s3.amazonaws.com/sts-misc/rebootOmate.apk
( This would work only for rooted omate watches)
Hello Everyone. I have my new Samsung S6 Edge about 3 weeks now. It worked flawlessly the first week and a half but lately I've been getting an intermittent problem with the sensitivity of the touchscreen and it is very annoying. I have to swipe, touch a letter (if texting), or touch an icon, multiple times before it will execute the touch. Sometimes it seems as if it is in slow motion where the execution responds 4 to 5 seconds after the touch. There has not been any new software added and I always close out of any running programs.
I have tried all of the following to which none had any effect:
a) Restarting the phone by using the on/off key dialog box
b) Shutting it down for a couple of minutes and starting it again
c) Using Samsung's method to restart the phone by holding the on/off key and down volume key simultaneously
After a day and a half of frustration I was ready to take it back to my mobile supplier when it all of a sudden starting working properly after checking to see if my phone volume was at the maximum volume by hitting the up volume button. It worked well for about 3 days and then started to do the same thing. So again, I played with the volume down and up buttons until the touchscreen sensitivity worked.
I'm currently having the same issue again which prompted me to post this message. Playing with the up and down volume keys seem to help it at a ratio of about 7 out of 10 times. I've searched the web but haven't found anyone else with the same issues. A look at the Applications Manager under Running apps, System is taking up 1.1 GB, Apps taking up 530 Mb, leaving 0.99 GB of free memory.
Any suggestions? Maybe I should be taking it back for a hardware replacement?
Thanks for listening.
OK, so now I've come to the conclusion that hitting the volume up key was just a fluke although It seemed to help sometimes. S6 touchscreen returned to normal again yesterday afternoon. It just comes and goes which makes it rather difficult to show a mobile technician. I'll have to wait until it malfunctions again before taking it in to a Samsung Repair shop.
Me too....
I have subscribed to this thread, in hopes of finding some clues, because I too, have noticed the same exact behavior that OP described and was searching for a remedy/explanation. Also, had the volume up and seemed to somewhat fix it, but like OP said it is sporadic. I, by accident in trying to clear the cache, completely blew away my phone and had to rebuild my phone as I had before and even after a complete reset, I still have the same behavior.
Hi Chris, I stumbled across another interesting behaviour. While the phone is acting up, if you press and hold the UP Volume key (keeping it depressed) you will be able to scroll and press icons as normal. As soon as you let go of the volume key, the issue continues.
This is a link to a video I uploaded today to You Tube that shows exactly the issue I am having.
w w w .youtube.com/watch?v=vkfaxILs4VQ&feature=youtu.be
Just saw your vid, looks like yours is more pronounced than mine (non-Edge btw) and happens once in a while and then it goes away - I am hoping it isn't progressive. I can't seem to identify what triggers the sluggish behavior. I typically clear all apps from the recent apps as a matter of my normal operation in all my previous smartphones. When I notice it the most is when pulling down the notification center and either nothing happens or I have to pull down the shade all the way down for it to stick, otherwise it slides back up.
disable briefing app
Alex-V said:
disable briefing app
Click to expand...
Click to collapse
Thanks Alex, I tried your suggestion and disabled Briefing, cleared the cache & data, then restarted the phone. It did not fix the problem.
DreamMaker888 said:
Thanks Alex, I tried your suggestion and disabled Briefing, cleared the cache & data, then restarted the phone. It did not fix the problem.
Click to expand...
Click to collapse
for me it's much better..still think it's also the memory problem..as around a half day all is fine..than the lag starts..
Took the phone to a Samsung Repair Shop today. Turns out the LCD display was malfunctioning. It took them 1.5 hours to repair and replace under warranty. Hopefully I won't have anymore issues with it
DreamMaker888 said:
Took the phone to a Samsung Repair Shop today. Turns out the LCD display was malfunctioning. It took them 1.5 hours to repair and replace under warranty. Hopefully I won't have anymore issues with it
Click to expand...
Click to collapse
Wait what? They told you the LCD screen is broken....?
Alex-V said:
disable briefing app
Click to expand...
Click to collapse
Briefing app? Can you provide more details please?
I'm having the same issue
To send a text I have to hit almost all the buttons 3 times! This just started. I may have to root this phone now. This pisses me of
He hair s trying appear.. This is what it looks like trying to use my phone now. I originally wrote "the issue is getting worse" but the lag is unbearable now
delete
delete
Alex-V said:
delete
Click to expand...
Click to collapse
lol....my Rom will come. massive. later..must sent phone into warranty repair..touchscreen digitizer is not. working fine
Hello,
For touch screen problem try this:
-in dialer type *#2663#
-TSP firmware update (general)
You should see "PASS"
That have solve my touch screen problem...
-JFK- said:
Hello,
For touch screen problem try this:
-in dialer type *#2663#
-TSP firmware update (general)
You should see "PASS"
That have solve my touch screen problem...
Click to expand...
Click to collapse
This solve my unresponsive touchscreen issue!!! Thanks very much
-JFK- said:
Hello,
For touch screen problem try this:
-in dialer type *#2663#
-TSP firmware update (general)
You should see "PASS"
That have solve my touch screen problem...
Click to expand...
Click to collapse
actually it really helped a lot
thx bro
Yes, I did that same thing, and it did help a LOT.. however after the latest update (I have the Edge+) the issue returned.. did it again, and it "fixed" it, but for how long?
And why is this happening??