Prophet Upgrade 2.6 - bikertibi - JAMin, XDA Neo, S200 ROM Development

Do you want a single file flashing tool?
Here it is!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update to version 2.1
- some bugs fixed
Update to version 2.2
-removed command line console
-added my own style console
-many optimizations
Update to version 2.3
-fixed ocazional bugs with exit button
-deny posibility to change settings when upgrade are running
Update to version 2.4.5
-Added warning and stop upgrade if hardSPL fail.
Update to version 2.5
-Added Tooltips and shorcut to Device Manager(to check correct prophet driver install during flash).
Update to version 2.6.5
-Added Menu on mouse right click to application dialog.
-Added minimize to try feature
-Added automatic check of prophet drivers installation feature.
-final version!
-no future update!
0. Copy the nk.nbf file in the same folder with this flashing tool
1. Select your phone type G3 or G4.
2. If you use windows Vista or Windows 7 check the Vista option.
3. If you have already HardSPL your phone please uncheck the HSPL option.
4. Press Start Button to start ROM Flashing.
For Vista or Windows7 you need to replace the drivers with corect one from attached files. It works for bouth operation systems.
If you have the 64-bit edition of Windows you must disable digital driver signing before you continue on! To do this, restart your computer. After the initial BIOS screen but before the Windows bootup splash screen, spam press F8 until you see a Windows menu. If you do not get a menu and end up in Windows you pressed F8 at the wrong time. Try it again until you get the menu. In the menu select Disable Driver Signature Enforcement or Disable Digital Driver Signing (depending on your version of Windows). Windows will finish booting up and you can continue on.
More info about drivers installation here...
You don't need any other file to flash the ROM!!!!!!!!!

Sounds good! Will test it and if it's working good, I'll add it to my own ROMs!

Thanks for this i will test this asap

Please some feedback.
Thanks!

Nice...
Good idea to make it simpler...
Thanks much bikertibi for your sharing

bikertibi said:
For Vista or Windows7 you need to replace the drivers with corect one from attached files. It works for bouth operation systems.
Click to expand...
Click to collapse
I'm using win7 and just installing Windows Mobile Device Center. Which driver should I replace ?

me_devilgrey said:
I'm using win7 and just installing Windows Mobile Device Center. Which driver should I replace ?
Click to expand...
Click to collapse
After the hardSPL is done windows search for new drivers on the net. If you have an internet connection a bed drivers are installed. You must replace this driver and I remember the name is "PocketPC USB". The driver is the same in case of three color booting

bikertibi said:
After the hardSPL is done windows search for new drivers on the net. If you have an internet connection a bed drivers are installed. You must replace this driver and I remember the name is "PocketPC USB". The driver is the same in case of three color booting
Click to expand...
Click to collapse
Cool.. i'm trying to flash dopod 818 but still not sure since i upgraded to win 7, now i guess i'll try WM6.5 Build 23003 WWE bikertibi edition too. Thx..

me_devilgrey said:
Cool.. i'm trying to flash dopod 818 but still not sure since i upgraded to win 7, now i guess i'll try WM6.5 Build 23003 WWE bikertibi edition too. Thx..
Click to expand...
Click to collapse
I tested win 7 for flashing and works great....

working fine with WM6.5 Build 23003 WWE bikertibi edition flashing with win 7. Great job!

bikertibi said:
For Vista or Windows7 you need to replace the drivers with corect one from attached files. It works for bouth operation systems.
Click to expand...
Click to collapse
What do you mean by "to replace"? Simply to overwrite the driver files on the disk with the files from archive? I have Vista with already installed and running Mobility center. I tried to update the driver by pointing to the new drivers - system says I heve the latest drivers... I tried to install new drivers by clicking the inf files - got the message that it can't be installed in sucha a way...
Looks it is nice tool, but my knowledge probably is not enought..
Thanks in advance.

ZRimaZ said:
What do you mean by "to replace"? Simply to overwrite the driver files on the disk with the files from archive? I have Vista with already installed and running Mobility center. I tried to update the driver by pointing to the new drivers - system says I heve the latest drivers... I tried to install new drivers by clicking the inf files - got the message that it can't be installed in sucha a way...
Looks it is nice tool, but my knowledge probably is not enought..
Thanks in advance.
Click to expand...
Click to collapse
You have to make an upgrade to the already installed drivers by selecting the upgrade option in the hardware manager. After that you must select "manual pick" and "I have location" to point to the working driver. Remember that you need to replace only the driver active in the upgrading process (in the tree color state or after hard SPL)

Great job, thanks.
Gran trabajo, gracias.

Update first post
Update to version 2.1. Fixed some bugs..

Am having problems when flashing some times it works some times it wont the problem is after hardspl and the Device has white screen the update software comes up good but every time it trys to seach for the version of the os on my Devive it scans but then i get error cant continue phone not connected after hardspl active sync dont detect the phone anymore thats noumal right? its saying Not Connected after hardspl with white screen why wont it update? and yes i tryed both versions still the same problem please help thanks

lyndel4 said:
Am having problems when flashing some times it works some times it wont the problem is after hardspl and the Device has white screen the update software comes up good but every time it trys to seach for the version of the os on my Devive it scans but then i get error cant continue phone not connected after hardspl active sync dont detect the phone anymore thats noumal right? its saying Not Connected after hardspl with white screen why wont it update? and yes i tryed both versions still the same problem please help thanks
Click to expand...
Click to collapse
Is normal to disconnect activesync after hardspl because it change the phone state to update drivers. Sometime if you don't have finished the activesync connections steps, after hardspl, the updating program repport imposibility to connect. Don't worry. Exit updating program without close the "Update Prophet" program and make again all steps for upgrading (select g3 or g4 model always, if it is already selected too, select hspl option) and start a new upgrading, ignore copy warning with "cancel". Normaly the update process will start again and report corrected connection for upgrade.

Thanks al try that but after that error active sync wont find it and the update software aswell so i always have to reset my device first then flash but yes al keep on trying I suspect it must be a software thats interupting the upgrade maybe i should close down all my programs first before upgrade to prevent this problem the only program i got is IM Clients and Firefox browser plus Windows Defender al try it and let you know because those applications could be interupting the update process. Thanks again

bikertibi, does this work like Lazy Tool too?

clustered said:
bikertibi, does this work like Lazy Tool too?
Click to expand...
Click to collapse
For me i find its just like lazy tool only it has a GUI lazy tool is only command line DOS so use it I get no problems

I ran v2.1 on Windows7 x64 (b7100) with installed Vista64_DRIVER.
Signing drivers was turned off, test mode (for OS) was turned on.
But unsuccessfull: RUU still crash.
See details in this screenshot:
http://s1.sendpic.ru/111214.jpeg.html
BTW, is it significant that "sleep4.exe" is "not compatible" or not?
Because I think that there is something wrong with Vista64_DRIVER driver.
Any solutions?

Related

WM6/Crossbow Prophet Info

Hi,
To stop all the questions/threads/shouting for links.
NO WM6/Crossbow stuff on the XDA FTP server, it will be removed as per M$ legal departments request.
To stop the gossip:
1. Yes, the ROM in doing "the round" with some prophet ROM maker(s)
2. No, I will not (yet) upload a WM6/Crossbow ROM on the FTP server
3. Yes, I will release a proper(ish) WM6 Crossbow ROM in English for the prophet at some point in time.
A general warning, there are versions out there that will brick your phone if you don't know what you are doing.
If you want to "risk it" fine, but don't come crying when it goes wrong.
Better wait for a proper "prophet wm6 beta release" coming soon
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/downlo...cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
I can confirm you can go back to another ROM and it doesn't "mess up" or lock your radio ROM (using the orwell version)
Prophet Crossbow
Hi Jester! I have a G4 prophet now I have a few questions.
1. Is there any Crossbow rom at the moment that will work on the Prophet?
2. Does the Prophet have to be CID-Unlocked to work with Crossbow
3. Is it possible to CID-Unlock a G4 Prophet?
Sorry if it are stupid questions
Thank you
rvbcrs said:
Hi Jester! I have a G4 prophet now I have a few questions.
1. Is there any Crossbow rom at the moment that will work on the Prophet?
2. Does the Prophet have to be CID-Unlocked to work with Crossbow
3. Is it possible to CID-Unlock a G4 Prophet?
Sorry if it are stupid questions
Thank you
Click to expand...
Click to collapse
1. yes (with problems...but might be fixable)
2. can't verify right now, but looking at it, looks like it needs to be unlocked
3. yes, for now using a pay service, people are working on a free solution, but that will take time.
Ok to be a little more specific, is there already a crossbow rom available? or are you working on one and is there a possible release from you in the near future..
I mean, I have downloaded a few roms, and I'm a little bit afraid to try them all..
rvbcrs said:
Ok to be a little more specific, is there already a crossbow rom available? or are you working on one and is there a possible release from you in the near future..
I mean, I have downloaded a few roms, and I'm a little bit afraid to try them all..
Click to expand...
Click to collapse
*hands you glasses, read the first post again please*
Ok got it working now, on a G4 CID-LOCKED!! Prophet I used the CopyToFFS methode instead of the Update-NoId tool! Damn it's hot!! got some problems with sound but I think Jester will fix this all for us! good night all!
yep theres no need for cid unlock on a g4 model , working for me too
Well pals ur brave And did you try to downgradge yet?Is there some radio lock now? I did'nt try this cause i have some casses to think that 3.5 rom is coming soon
cr0ssy said:
yep theres no need for cid unlock on a g4 model , working for me too
Click to expand...
Click to collapse
Did you guys use the orwells1984 file?
Jesterz said:
3. Yes, I will release a proper(ish) WM6 Crossbow ROM in English for the prophet at some point in time.
Better wait for a proper "prophet wm6 beta release" coming soon
Click to expand...
Click to collapse
Don't try anything yet guys... just wait for a proper release from Jesterz !!!
Thanks for your work
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/download/f/b/b/fbb3d5eb-53f5-4dbc-bbea-d06dd623cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
more later
Jesterz said:
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
Click to expand...
Click to collapse
Isn't that version supposed to be for the Wizard?
Mike
MusicMike said:
Isn't that version supposed to be for the Wizard?
Mike
Click to expand...
Click to collapse
duh, yeah, but thats the only thing we got at the moment, so we are going to try to adapt it for the prophet.
Jesterz said:
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/download/f/b/b/fbb3d5eb-53f5-4dbc-bbea-d06dd623cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
more later
Click to expand...
Click to collapse
2,7,8 are problems that have been solved with other roms ported from wizard. (So I believe that there won't be a problem here)
4,6 are no big deal to fix (there is a hidden camera shortcut in the windows folder)
So the severe problems are 1,3,5.
Is the charging problem the same as the aku 3.x you where working on?
Could it be easier to fix than the 3.x?
Good luck to you mate
Jesterz said:
Ok, info:
- the WWE version going around (yes the orwell version) works on the prophet but has the following problems (i'm still checking so this list will get bigger)
1. No audio
2. The screen setup is in landscape mode (you can switch to portrait after the setup)
3. no ext. rom installation (it doesn't start even after hard reset)
4. you need to have activesync 4.5 for it to work (beta 2 avaiable on ms site here)
http://download.microsoft.com/download/f/b/b/fbb3d5eb-53f5-4dbc-bbea-d06dd623cf6c/setup.exe
5. battery problem, it doesnt charge nor does it know anything about the battery status.
6. no camera software
7. buttons are mapped wrong
8. screen goes to landscape after softreset
more later
Click to expand...
Click to collapse
1 6: I had solved in Chinese Version WM6. Just change dll driver.and copy file(The camera needs almost 58 files)
3 4: It's not important
2 7 8: They are same problem. The keyboard driver wrong.I have no idea now.
I think the related drivers are hidparse.dll kbdhid.dll keybddr.dll.
5: It's the big trouble. I think the related drivers are battdrvr.dll usbfn.dll. I changed battdrvr.dll using 818PRO's driver.The battery status is ok. But charging still need soft reset.
The aku 3.3 rom from 838 solved problem 2 7 8. Anybody know some about it?
andrew_sh said:
2,7,8 are problems that have been solved with other roms ported from wizard. (So I believe that there won't be a problem here)
4,6 are no big deal to fix (there is a hidden camera shortcut in the windows folder)
So the severe problems are 1,3,5.
Is the charging problem the same as the aku 3.x you where working on?
Could it be easier to fix than the 3.x?
Good luck to you mate
Click to expand...
Click to collapse
how did you solve the 2 and 8
thx....
digifan said:
how did you solve the 2 and 8
thx....
Click to expand...
Click to collapse
I didn't do it. I think the people at pdamobiz did it. It must be a registry setting
riverzhou said:
5: It's the big trouble. I think the related drivers are battdrvr.dll usbfn.dll. I changed battdrvr.dll using 818PRO's driver.The battery status is ok. But charging still need soft reset.
Click to expand...
Click to collapse
Could the battdrv.dll from the htc artemis work? It almost has the same board as the prophet.
what do you think?
wm5 vs wm6
WM5 vs WM6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wm5 aku2.2 pool size 12mb was tweaked with sktools&tweak2k for max performance.
well yeah your screenshot that theres basically no difference and its still 5.2 or something so worth it only out of interesst
and the wizard rom didn't work on my g4 cid locked model

WM6 Korand WWE 2.1 Clean

In contiune of Absolutely new and different WM6 ROM for Prophet! (Korand WWE1 Clean):
WM6 Korand WWE 2.1 Clean
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- OS 5.2.1938 (Build 18128.2.2.0) - the last official build from Kaiser
- 8Mb poolsize
- Office 6.1
- NetCF 3.5
- Big Storage (63.18 Mb / 55.3 Mb available according to the current device)
- 27 Mb free of RAM when you delete all links from Windows\StartUp folder
Fixes and improvements:
- MMS added
- Camera fix (no artefacts while overclocking)
- Start and menu sounds fixed
- Internet Sharing and Java Midlet Manager links added to Start menu
- Settings / External GPS link added
- Remote Desktop added
- SMSDRfix added
- WM5torage added
- HTC scroll added
- IE cache and Camera default save place moved to Storage card
- Original input methods
- IE slow scroll fix
- Sound and voice improvements
- Power improvements
- Speed improvements
Update instructions:
1. Download g4.zip attached if you have G4 device or download g3.zip attached if you have G3 device. Unpack it to some place on you PC. You will have 2 dirs inside: "jumpspl" and "update"
2. Copy 3 files from "jumpspl" dir to the root of your Prophet (near Windows folder)
3. Download and unpack nk.nbf to "update" folder on your PC ( Download link: http://rapidshare.com/files/75941401/korand_wwe_clean_2_1.rar.html )
4. Disconnect your device form PC
5. Run "SPL.lnk" in the root of your device from File manager. You will see a white screen
6. Connect your device to PC with USB cable
7. Run "ROMUpdateUtility.exe" in "update" folder and follow all steps
8. You can see process indicator only on PC! Screen of your device will be white during all update process. When finished your device will reboot.
9. Enjoy
---
If you want to change poolsize - download "korand_wwe_1_change_pool_size.zip". This is patched Paradis utils. Just connect your device to PC with Activesync and run .bat with needed poolsize.
screenshot please
Screenshot???
No screenshots because you can't see something new - clean official rom with official theme It's a new version of Korand WWE1 rom with new build and some fixes and improvements.
Flashing and hoping
sorry i can't understand
Korand unfortunately I think this rom has the same problem as Crystal V5. You can not install applications that are not signed.
hma4 said:
Korand unfortunately I think this rom has the same problem as Crystal V5. You can not install applications that are not signed.
Click to expand...
Click to collapse
You are not right on 100% Some of the specific applications and root sertificates really can't be installed.
I tried to remove the sertificate from custom keyboard that I can't install - and its installed with no problems. The problem is to install applications with some kind of sertificates i think...
But all soft I use has no problem to install: SpbPhoneSuite, SpbWeather, SpbPocketPlus, BatteryStatus, Cash Organizer, Vehicle Manager, Resco Explorer and many others (including customized Commanagers, keyboards and others).
any chance on getting a 4shared link? Tnx
Total Storage= 63.18mb, Total Program = 44.01mb
Total Storage= 63.18mb, Total Program = 44.01mb
Not As Little As The 1st Post ~~~~~~~
With nothing in startup folder and today screen, Memory result like this:----
Free Storage: 57.9MB, Program Free: 24.37
Sorry for my stupid question. Iàm in the original WM5 now. When I do this new methode 1. Jumpspl. 2. update romupdateutility 3. Start your software. I always stuck in bootloadermodus. Where is my mystake. Please can me help ?
dioxda2 said:
Total Storage= 63.18mb, Total Program = 44.01mb
Not As Little As The 1st Post ~~~~~~~
With nothing in startup folder and today screen, Memory result like this:----
Free Storage: 57.9MB, Program Free: 24.37
Click to expand...
Click to collapse
Are you have G3 or G4 device? Looks like G3 devices has 10Mb bigger Storage than G4...
Many thanks for the astunishing release part 2!!!
A lot of issues especially something "long been ignored" such as the "slow scroll" have been attended.
Wonder if it is a good idea for you to cook a "Far-East friendly version" with the wince.nls supporting Chinese regions like EVO8en, Mysterious and Gullum's multi-language version had done.
This is critical for Chinese readers because a post-flash-overwritten wince.nls can ALWAYS distablize an otherwise perfect rom.
Thanks for your effort again and look forward to the Far-East friendly version's release^^
Wow, this release is fantastic: very fast and without any big problem..
There are only 3 things I would change:
1- Old Arcsoft MMS (it's so old that the network wizard doesn't work with it and I have to manually change the settings when I change the SIM card
2- Old Midlet Manager (having few issues with some midlets)
3- The Font in the Comm Manager
If there is a way to fix these two things it would be the ROM for me
Thanks Korand!!
Sam Trevi said:
1- Old Arcsoft MMS (it's so old that the network wizard doesn't work with it and I have to manually change the settings when I change the SIM card
Click to expand...
Click to collapse
Actually I can't enter the parameters manually: it doesn't save them..
Any suggestions?
NEO130 said:
Sorry for my stupid question. Iàm in the original WM5 now. When I do this new methode 1. Jumpspl. 2. update romupdateutility 3. Start your software. I always stuck in bootloadermodus. Where is my mystake. Please can me help ?
Click to expand...
Click to collapse
Quick information
1.Check your device..either it is G3 or G4..
2.Do the HardSPL.
3. copy/put your rom (nk.nbf) into Rom update utility..
follow the instruction & you're done..
further info
http://forum.xda-developers.com/showthread.php?t=350033
or maybe you might try to hard reset after flashing it but stuck on the boot screen..
or try flash it all over again..
all of this come from my own experience..
goodluck
Pretty good rom. I've had to install more than I'm used to having to get it all how I want it, but it's still fast after the stuff's installed and at least there's room for it!
Sad news is Contacts isn't working. I've had this before on other roms sometimes but I don't know ow to work round it.
Thanks!
littld said:
Pretty good rom. I've had to install more than I'm used to having to get it all how I want it, but it's still fast after the stuff's installed and at least there's room for it!
Sad news is Contacts isn't working. I've had this before on other roms sometimes but I don't know ow to work round it.
Thanks!
Click to expand...
Click to collapse
Try to rename "pim.vol" in the root of device to "pim1.vol" then reset device and syncronise contacts from PC. Aftert that you can delete "pim1.vol".
Are you using any backup program?
Korand i love your first rom! So fast! Is this as fast as your first version ? Gonna try this out ..
can anyone assist to upload to 4shared? Thanks a million

[GUIDE] How to flash your ROM in Vista & Se7en!!!

- Download Cloudyfa_ProphetTOOLS
- Extract the zip file, you'll have VistaDRIVER + VistaRUU
- Enter BootLoader
- Plug in your USB cable
- Right-click on Computer, chose Properties
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- On the top left conner, chose Device Manager
- Right-click on Microsoft USB Sync (or something similar in Mobile devices), chose Update Driver Software
- Then follow my mark on these pictures:
Done !!!
From now on, you can use the new tool (VistaRUU) to upgrade your device in Vista instead of old RUU files!
Note: The new RUU can work in Windows XP and Windows 7 as well. So people using XP, Win7 can update your tool if you like
For Vista 64 users, use this driver instead: Vista64_DRIVER
Remember to disable Driver Signing Enforcement (google for it)!
:-O
If this is working, u're my new idol man^^
Edit: can't use driver under vista x64 =(
x64 Vista and Win7 driver!
Thank you so much Cloudyfa. Your Method is working fine fo me.
vaothien said:
Thank you so much Cloudyfa. Your Method is working fine fo me.
Click to expand...
Click to collapse
of course . I have test it too a week ago.
Great Job from Cloudyfa. Like always.
Cloudyfa said:
That driver is for Vista32 You should try this! (I've not tested it yet)
Click to expand...
Click to collapse
Not working =(
Isn't recognized as a Win64 driver
ice8lue said:
Not working =(
Isn't recognized as a Win64 driver
Click to expand...
Click to collapse
Vista64 has strong security, you must disable driver signing enforcement to install the driver. You should search google to do that (i think it's easy for you as you chose to use Vista64 instead of Vista32 )
I did, but it doesn't work
Bagaimana mengupdate ROM HTC Prophet di Windows VISTA
Cloudyfa, I translated it into Indonesian languange
Langkah - langkah mengupdate ROM HTC Prophet dengan Windows Vista :
Download Cloudyfa_Prophet TOOLS
Extrak Zip file. Didalamnya kamu akan lihat VistaDRIVER + VistaRUU Folder
Masuk ke Mode BootLoader
Sambungkan device kamu dengan USB cable ke PC
Klik kanan di Computer, lalu pilih Properties
Dibagian kiri pilih Device Manager
Klik kanan di Microsoft USB Sync (atau juga mungkin Mobile devices), lalu pilih Update Driver Software
Lalu ikuti petunjuk melalui gambar berikut ini :
Selesai !!!
Mulai sekarang kamu bisa mengunakan (VistaRUU) untuk mengupdate device kamu di Vista ( dites pada VISTA 32 Bit) dengan RUU yang terbaru ini.
Catatan:RUU yang baru bekerja dengan baik di Windows XP juga. Jadi orang yang mengunakan Windows XP juga bisa mengupdate dengan RUU terbaru ini
All Credit for this Tools go to Cloudyfa
Is there any one test it on windows 7 beta build 7000? Can it work? Thanks
h2_viethoang said:
Is there any one test it on windows 7 beta build 7000? Can it work? Thanks
Click to expand...
Click to collapse
Opp, I have tested myself, this tool works well on Windows 7 Ultimate build 7000. Thanks for great tool.
ice8lue said:
I did, but it doesn't work
Click to expand...
Click to collapse
My friend tested it with his Vista64, it works for him, you should check all steps again!
varanusvincent said:
Cloudyfa, I translated it into Indonesian languange
Click to expand...
Click to collapse
Nice job, friend
h2_viethoang said:
Opp, I have tested myself, this tool works well on Windows 7 Ultimate build 7000. Thanks for great tool.
Click to expand...
Click to collapse
You're welcome!
h2_viethoang said:
Opp, I have tested myself, this tool works well on Windows 7 Ultimate build 7000. Thanks for great tool.
Click to expand...
Click to collapse
just tested on windows 7 ultimate build 7000 64bit with the vista64 driver even with teh driver signing enforcement being turn off the driver refuse to work it seems like it lack alot of files compare to the driver download from windows update...
Hi there.
Device Driver is not working with Vista X64 SP2 (Driver signing disabled)
The Devicemanager marks the Device with a yellow triangle with an exclamation mark inside.
The Driver details tell me that the Driver is damaged or not found (Code 39).
Regards,
Petros
Too bad that I've upgraded to Asus P535 .
I'll try it on my old prophet - hope it works on Vista x64.
Thanks you.
Hi everyone out there!
I have eagerly awaited a way to flash my Prophet under Vista!
I haven't dared to flash, I've just read all the wiki's and fourum posts so far.
The problem is as follows:
I don't have the Mobile Devices node in my device manager as it's shown in the guide.
Therefore I can't install the vista driver that I need.
I've fetched the installation for "Center for windows mobile units" and installed this.
First I thought that the missing node in device manager was because of missing syncronisation between my Prophet and my home computer but that was not the case.
Any suggestions out there!?
Please help!
Ohamn said:
The problem is as follows:
I don't have the Mobile Devices node in my device manager as it's shown in the guide.
Therefore I can't install the vista driver that I need.
Click to expand...
Click to collapse
Turn your mobile into bootloader (3 color screen) and plugin the USB Cable, wait a minutes and the Mobile device node will show in the Device manager.
hi Cloudyfa, thanks for this tutorial.
i've done your steps. looks like it can connect when i open romupdateutilityG3. now i want to install dioxda's rom, how do i do that with this? do i copy the contents of the 'rom' folder to vistaRUU folder?
h2_viethoang said:
Turn your mobile into bootloader (3 color screen) and plugin the USB Cable, wait a minutes and the Mobile device node will show in the Device manager.
Click to expand...
Click to collapse
Is there any way to exit boot loader mode once I have updated the drivers or do I have to flash my Prophet to exit boot loader!?
// Ohamn
Ohamn said:
Is there any way to exit boot loader mode once I have updated the drivers or do I have to flash my Prophet to exit boot loader!?
// Ohamn
Click to expand...
Click to collapse
Soft reset

[HOW_TO/UTIL]ChevronWP7 Unlocker & Cert download - Works On Windows ® Phone 7 Tsunagi

[HOW_TO/UTIL]ChevronWP7 Unlocker & Cert download - Works On Windows ® Phone 7 Tsunagi
This method unlock, runs on your machine toshiba tsunagi.
It is very important, because the tool that unlocks the device.
Now we can install applications, etc.
More Info:
ChevronWP7 Unlocker & Cert download - *here* + video tutorial
How?
1. Connect Windows phone 7 (TG01 for me)
2. ON THE DEVICE go to cr-developers.co.cc/cwp7.cer and install. Lock the phone and leave it.
3. edit the properties of ChevronWP7.exe (I am running windows 7 64 bit.)
a. Run in compatibility mode XP SP3/Vists/Windows 7
b. Run as Admin.
c. Apply those changes and exit. DO NOT RUN IT YET
4. Start up the Zune software, and make sure it detects your phone
5. Run ChevronWP7 (If you get the pin code error, simply slide the lockscreen up so you can see the tiles, and run the program again.)
6. Then click all of the check boxes and unlock
There you go. This is just how it worked for me. If you have any questions, Ill try to help you.
Click to expand...
Click to collapse
Have Fun!!!
Nokser
Nice work, but i have signal and can recive sms. Will this improve signal streinght or it can't be helped?
Nokser said:
This method unlock, runs on your machine toshiba tsunagi.
It is very important, because the tool that unlocks the device.
Now we can install applications, etc.
More Info:
ChevronWP7 Unlocker & Cert download - *here* + video tutorial
How?
Have Fun!!!
Nokser
Click to expand...
Click to collapse
thank you nokser! how has said you can´t describe prozesses step by step? thank you!
hi nikola im in the same boat my signal is terrible
True, but Jool said he have exelent call quality, I will see tomorow when i get to Novi Sad it is a big city here in Serbia, there i should have good signal streinght... Downloading Zune, and hoping for best.
---------- Post added at 08:24 PM ---------- Previous post was at 07:39 PM ----------
I get the eror, uh,oh connect USB and Start Zune, but botha re ok, why i get this?
has anyone had success with this ? i havnt tried it yet on my tg01 WP7
jonnyhall1bmx1 said:
has anyone had success with this ? i havnt tried it yet on my tg01 WP7
Click to expand...
Click to collapse
You install certificate in phone?
noo i havnt tried it yet i will try when i get home does the chevron hack work on our tg01 ?
jonnyhall1bmx1 said:
noo i havnt tried it yet i will try when i get home does the chevron hack work on our tg01 ?
Click to expand...
Click to collapse
Yes I test this in my TG01, and work...
if not in first time, then i reinstall cer. one more, reset and unlock in this program.
I installed certificate and i can't run ChevronWP7, I done everything It says but I get error to connect to USB and start Zune software
Nokser said:
Yes I test this in my TG01, and work...
if not in first time, then i reinstall cer. one more, reset and unlock in this program.
Click to expand...
Click to collapse
thank you nokser i will try when i get home
maybe it helps:
IMPORTANT: CHEVRON CERTIFICATE expired on 25. Novembre 2011
the chevron unlock certificate which you install on your device (step 2) expired on 25. Novembre 2011. The only solution to still be able to use the Chevron unlocker is to set on both your PC and your WP7 device to something before 25. Novembre 2011 and reboot both devices (!) before using the unlocker again.
HackMimic said:
1. download and install Windows Phone Developer tools or try only this regfile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PhoneRegAdd.zip unzip and start it on your computer. this writhe reg hey in your registry. reboot or logout/ login windows
2. Do u have Skype or any other app like that running on ur machine?
If so then u need to full close out of those apps. Make sure there process's are not still active. U can do so through task manager
Settings ZUNE
3. In Zune when ur phone connects does it say ur name or guest?
If guest then u need to hit the button below the phone image to set up ur phone to be the main user.
4. Did u sign into Zune? If no then sign in. I was signed in when it worked for me.
Click to expand...
Click to collapse
Talys said:
That worked for me...install first Windows Phone Developer tools to get the app loader from Microsoft, which is where I'm at now. r try only this regfile
PhoneRegAdd.zip unzip and start it on your computer. this writhe reg hey in your registry. reboot or logout/ login windows
ON THE tg01 go with internet browser to cr-developers.co.cc/cwp7.cer and install. the chevron cert.
2. make sure registry (in your Computer) is modified:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsPhone\ProxyPorts]
“DeviceReg”=dword:000069C5
I think the WP7 developer tools from MS does this, but you can add it in manually
(it's a 32bit DWORD)
3. plug in phone and leave zune running (read Settings ZUNE)
4. run chevronwp7.exe (as administrator) , click both checkboxes
5. click unlock
To stay Chevron unlocked, turn your device in Airplane Mode if you connect Zune (if not, Zune will re lock your Phone again)
Click to expand...
Click to collapse
i can now download stuff from market place does that mean i have unlocked my phone?
jonnyhall1bmx1 said:
i can now download stuff from market place does that mean i have unlocked my phone?
Click to expand...
Click to collapse
if was before not possible, then yes
with chervron unlocke wp7 device you can download also hombrew apps
for example form xda site. the apps are a .xap files. to install it you need a xap deploy prog.
To stay Chevron unlocked, turn your device in Airplane Mode. Run Zune, after sync. Deploy your app.
jonnyhall1bmx1 said:
i can now download stuff from market place does that mean i have unlocked my phone?
Click to expand...
Click to collapse
you did it by Miro guide or Nokser? PLs help me to unlock the phone, and yes if you can download from market and install custom xap's that mean you did it
here the whole (orginal) thread from Noksers post:
http://forum.xda-developers.com/showthread.php?t=852020
can some 1 tell me what this chevron thing actually does?
jonnyhall1bmx1 said:
can some 1 tell me what this chevron thing actually does?
Click to expand...
Click to collapse
Its a jailbreak- with the security cert- it allows you access to the system
such a key for a door in the sandbox (firewall) from WP7 System
ohhh haha i innstalled it anyway but im not that hightech for anything like that
jonnyhall1bmx1 said:
ohhh haha i innstalled it anyway but im not that hightech for anything like that
Click to expand...
Click to collapse
i´m also a "normal" user. I "use" other hightechS develop and hack ....

Comprehensive tutorial of Installing VCOM Driver

Ok, I have been seeing that many of the members are facing problem in installing USB VCOM driver in preferably in Windows 8. Before you go for installing USB VCOM driver you first have to disable automatic driver installation otherwise your OS might install wrong driver from the net and then you would keep waiting after hitting download button of SP Flash Tool.
How to enable/disable automatic driver installation for Windows 8
Description: How to enable or disable the automatic driver installation feature in Windows 8 for newly added hardware.
1. Right-click on Computer and then click on Properties.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Click on Advanced system settings.
3. When System Properties opens, click on the Hardware tab.
4. Once in the Hardware tab, click on Device Installation Settings.
5. Once the Device Installation Settings window has appeared, click on the radio button next to No, let me choose what to do.
6. Once No… has been selected, there will be three new options that appear below the previously selected choice. Click on Never install driver software from Windows Update. The check-marked box next to Automatically get the device app and info provided by your device manufacturer can be left checked.
7. Once all the changes have been made, click on Save Changes to save all the settings changed on that screen and then the screen will close.
8. Once back to the System Properties window, Click OK to save changes and close out of System Properties.
Once you have followed this tutorial, you have to follow another tutorial so that your OS can install Unsigned drivers, follow this tutorial.
http://forum.xda-developers.com/showthread.php?t=2303046
Now you are ready to install USB VCOM driver.
Download driver from links given below:
For Window XP, Vista and Windows 7 (Thanks to bhargav1991): http://forum.xda-developers.com/attachment.php?attachmentid=1786965&d=1362676523
For Windows 8 (Thanks to Kumar Abhishek): http://www.mediafire.com/?7yee2of64nhl947
1. Take the battery, SD card and SIM out of the phone
2. Open device manager (on computer search it or control panel)
3. Holding volume+ connect it to PC via USB (once you hear a sound from PC you can release Volume +)
4. In other devices MT65xx Preloader
7. Right click MT65xx Preloader
8. Go to update driver
9. Locate the drivers provided according to your OS (XP, Vista, Windows 7 or Windows 8)
10. And let it do its work.
You might have to reboot your system after installing VCOM driver, to confirm connect your device once again without battery and see if you something like "MediaTek PreLoader USB VCOM Port" means your driver is installed properly if you still see "MT65xx PreLoader" you have to repeat the process.
Remember the hardware in the Device Manager is visible for few secs only.
Any solution for this?
Thanks for this!
It does install the driver correctly but i still cannot flash...
In the hardware manager i cannot see it, only when i select "see hidden devices".
Even when my telephone is connected, it will show in the driver description: the device is currently not connected.
How can i solve this?
coolbud012 said:
Any solution for this?
Click to expand...
Click to collapse
That is adb driver, You don't have to worry about adb driver, you don't require it for flashing.
mainstreamer said:
Thanks for this!
It does install the driver correctly but i still cannot flash...
In the hardware manager i cannot see it, only when i select "see hidden devices".
Even when my telephone is connected, it will show in the driver description: the device is currently not connected.
How can i solve this?
Click to expand...
Click to collapse
Pre-loader is visible only for 2-3 secs, don't worry about this hit download button and then connect your device to PC, it should start flashing.
nice_guy75 said:
Pre-loader is visible only for 2-3 secs, don't worry about this hit download button and then connect your device to PC, it should start flashing.
Click to expand...
Click to collapse
It tried that but it won't flash.
Reinstalled the drivers several times, but nothing.
I get an error about pmt or something.
i followed ur step by step tutorial but not working
device is connecting and within a few seconds it is disconnecting ............... :crying:
I installed the drivers over and over again.
Only the MediaTek PreLoader USB VCOM Port get's installed.
After that i try to flash, but always the same error:
PMT Changed for rom; it must be downloaded.
What can i do?
CHAITANYA KANTETI said:
i followed ur step by step tutorial but not working
device is connecting and within a few seconds it is disconnecting ............... :crying:
Click to expand...
Click to collapse
It doesn't matter, you just go ahead and flash your ROM, you would be able to flash your ROM easily.
mainstreamer said:
I installed the drivers over and over again.
Only the MediaTek PreLoader USB VCOM Port get's installed.
After that i try to flash, but always the same error:
PMT Changed for rom; it must be downloaded.
What can i do?
Click to expand...
Click to collapse
It is not the problem of driver, your Scatter file is of some different device, either download stock ROM from Moulinsky or make one using MTK droidtool.
It worked for me guys in windows 8 :good: but not in windows 7
nice_guy75 said:
It is not the problem of driver, your Scatter file is of some different device, either download stock ROM from Moulinsky or make one using MTK droidtool.
Click to expand...
Click to collapse
hi Nice guy,
I am facing same issue with Lenovo S820, downloaded Stock rom but i think scatter file is missing something as Preload entry is missing. can you give any pointer for this solution
Edit : I am getting PMT Error too .. Tried Latest SP Flash tool too
thanks in advance
Vaibhav
nice_guy75 said:
Pre-loader is visible only for 2-3 secs, don't worry about this hit download button and then connect your device to PC, it should start flashing.
Click to expand...
Click to collapse
QU
My system is win 7 ulmate 32 bit.
How to enable installation of unsigned drivers?
The tut is for win 8, and for 64 bits.
I followed a command prompt method of " bcdedit....checks" (for win 7 /64 bit) but it did not work.
I downloaded the vcom drivers for win 7 uploaded by bharghav 1991 but on installation the system said it could not install the file because it was an INF file.
On one occasion I got the preloaded installed, which said I was good to proceed ,but nothing happened.
I have tried all the sp tools and drivers available on the internet as administrator.
My device SD and desk top have turned to virtual grave yards of software souls.
AndI am getting nowhere.
I also tried the battery in method mentioned above .
Thanks in advance
nice_guy75 said:
Ok, I have been seeing that many of the members are facing problem in installing USB VCOM driver in preferably in Windows 8. Before you go for installing USB VCOM driver you first have to disable automatic driver installation otherwise your OS might install wrong driver from the net and then you would keep waiting after hitting download button of SP Flash Tool.
How to enable/disable automatic driver installation for Windows 8
Description: How to enable or disable the automatic driver installation feature in Windows 8 for newly added hardware.
1. Right-click on Computer and then click on Properties.
2. Click on Advanced system settings.
3. When System Properties opens, click on the Hardware tab.
4. Once in the Hardware tab, click on Device Installation Settings.
5. Once the Device Installation Settings window has appeared, click on the radio button next to No, let me choose what to do.
6. Once No… has been selected, there will be three new options that appear below the previously selected choice. Click on Never install driver software from Windows Update. The check-marked box next to Automatically get the device app and info provided by your device manufacturer can be left checked.
7. Once all the changes have been made, click on Save Changes to save all the settings changed on that screen and then the screen will close.
8. Once back to the System Properties window, Click OK to save changes and close out of System Properties.
Once you have followed this tutorial, you have to follow another tutorial so that your OS can install Unsigned drivers, follow this tutorial.
http://forum.xda-developers.com/showthread.php?t=2303046
Now you are ready to install USB VCOM driver.
Download driver from links given below:
For Window XP, Vista and Windows 7 (Thanks to bhargav1991): http://forum.xda-developers.com/attachment.php?attachmentid=1786965&d=1362676523
For Windows 8 (Thanks to Kumar Abhishek): http://www.mediafire.com/?7yee2of64nhl947
1. Take the battery, SD card and SIM out of the phone
2. Open device manager (on computer search it or control panel)
3. Holding volume+ connect it to PC via USB (once you hear a sound from PC you can release Volume +)
4. In other devices MT65xx Preloader
7. Right click MT65xx Preloader
8. Go to update driver
9. Locate the drivers provided according to your OS (XP, Vista, Windows 7 or Windows 8)
10. And let it do its work.
You might have to reboot your system after installing VCOM driver, to confirm connect your device once again without battery and see if you something like "MediaTek PreLoader USB VCOM Port" means your driver is installed properly if you still see "MT65xx PreLoader" you have to repeat the process.
Remember the hardware in the Device Manager is visible for few secs only.
Click to expand...
Click to collapse
***********
for the sole purpose of rooting my lenovo a 7000, i have installed win 8.
the drivers with the device just dont install,no matter i give auto run etc.
then I pull the battery out and pressing vol up connect my device. the click sound does not come.
and there are just too many drivers. which one should i update?
I'm on the same boat as everyone, the Windows 7 drivers do not work.

Categories

Resources