Related
Sorry for my ignorance but im a novice as far as pda's are concerned. I have looked through many posts but can't come up with an answer. I have just received my spv m2000 and need to know what I need to use it for sat nav in my car. Could anyone please advice? sorry if their is already a thread on this subject but im in a bit of a hurry as I am heading off for Southampton on a few days and need to get some gear ordered.
i am in the same situation as you. from research tomtom navigator with version3 software is the best option with either the gps reciever of bluetooth or wired
p1tse said:
i am in the same situation as you. from research tomtom navigator with version3 software is the best option with either the gps reciever of bluetooth or wired
Click to expand...
Click to collapse
i believe that tom tom 3 is the best but which bluetooth reciever and how much? There are a few on ebay but i dont want to get ripped offwith some cheap inferior one
I have heard good reports of emtac, particularly this model : http://www.expansys.com/product.asp?code=EMTAC_GPS_TRINE
I just got a Altina GBT-708 BT GPS off eBay, and have been testing it with MS Pocket Streets 2004 (free as part of my MSDN subscription) -- it works quite well, given the limits of the Pocket Streets software. I'll probably try the DeLorme software next -- it's only $35 as opposed to $150 for TomTom, and I'm a cheap bastard
The Altina can be had for $75-$100, and supports WAAS/EGNOS for extra accuracy -- it uses the same GPS chipset as the TomTom unit, at roughly half the price. One caveat about the Altina -- it's advertised as being able to work over USB, but it doesn't since it shows up as an different device than its driver expects. Not an issue for me, as both the systems I'll use it with are BT-enabled.
The tomtom bluetooth is good, the latest version has a removable battery also. Personally I use a cabled gps because I was having to power the xda in the car so I saw no reason to have a wireless setup when the same plug powers the gps also.
All you will ever need!!! for GPS info
Here it is.. again
www.pocketgps.co.uk
The best site around!
I got a cheap one off ebay, it works fine, paid £50ish, have to manually establish a bluetooth connection with it each time I want to use it but other than that its fine.
I use TomTom on my M2000 and Destinator on the carPC, TomTom wins hands down.
I use an M2000 on Orange with NavMan Smart ST V3. Works superbly and I love the 3D orientation.
Use it with a Holux cradle. You can read a review and my comments there. Mixed opinions on the product from me but the concept is good. Since I posted I have doctored my old nokia dash mount to fix it permanently without the wobble-arm
Still getting lockups if I start SmartST in the cradle. NavMan say they don't support this phone!!!
I did try the tom tom cradle with an external gps reciever but it wouldn't hold on to the port and fell over all the time. Would prefer a similar solution to the Holux but if you want a portable GPS solution the Holux is OK albeit with some issues ....... that speaker!!!!! AAAAGHHH. Fine now though. Read the review for more.
A couple of things worth noting...
Just to add a little info to this thread.
I have an SPV M2000. The information I found on the internet at www.globalpositioningsystems.co.uk and www.gpsforless.co.uk says that the TomTom GPS units are some of the best available. Mine works perfectly but I'm sure others are as good if not better.
One argument for wired and as opposed to Bluetooth GPS is as follows.
Wired means that you can use your Bluetooth headset if you get a call during your journey. Also no headset cable to get tangled in your flailing arms as you spin the steering wheel. Minus point unsightly wires across dashboard.
Bluetooth GPS means that you can use your GPS system away from the car as the Bluetooth unit is battery powered. You cannot use Bluetooth headset with it so problems as described above.
Just a couple of points but worth considering.
Re: A couple of things worth noting...
gazobee said:
Just to add a little info to this thread.
Bluetooth GPS means that you can use your GPS system away from the car as the Bluetooth unit is battery powered. You cannot use Bluetooth headset with it so problems as described above.
Just a couple of points but worth considering.
Click to expand...
Click to collapse
Sorry I dont belive this to be correct, I have the M1000 and I can/do use the bluetooth GPS and Headset at the same time..
dogo
I have an M2000 and i can use sat nav and a bluetooth headset, the M2000 disconnects from the GPS and connects to the headset (this process takes about half a second) during the duration of the call, and then it reconnects back to the GPS once the call is over
its true that you cannot use sat nav and make calls with bluetooth at the sametime, but you cannot see the screen or hear the sat nav program during a call, so what does it matter?
but it does switch seamlessly over, so do not be put off using a bluetooth GPS and a BT headset with your M2000
Oh, and by the way. the reason i chose a bluetooth GPS is because it is a self contained unit, so when it is powered in the car even when he car is switched off, it has always aquired a signal so no waiting when i get in the car for my position to be picked up
I've a Parrot BT CK3000 car kit and BT GPS and both work together fine, although I have less hassle if the GPS and my M2000 are connected first.
Just to clarify things here...
Previously I was running TomTom Navigator 3 on SPV M1000 and now have upgraded to TomTom Navigator 5 on SPV M2000.
On both Pocket PCs and with both versions of TTN, I was able to use bluetooth GPS AND use bluetooth headset to make calls etc without TTN packing up.
F
Thanks guys, I stand corrected.
Using gps away from the car would probably be useful for walkers and cyclists. I was unaware of the auto switchover. Lets just hope you don't get a call at a particularly complicated intersection.
I suppose that fact that i can sometimes spend 20 minutes on a call in the car would make BT gps useless for me. I'm glad I chose wired.
K
I have both wired and BT. Got the wired one way back with Destinator 2 on my original XDA (Bluetooth not an option at the time). Got BT GPS last year for XDAII and found that as I use SatNav mainly in the car I tend to use the wired one - no conflict with headset and charges the phone at the same time, so I don't have to remember to charge 2 devices. The original Xda connector has worked fine in XDA, XDAII and MDAIII.
By the way, three of my friends have bought the following cheap BT GPS from Expansys
http://www.expansys.com/product.asp?code=119717
And all say it works fine.
HELP
I HAVE BEEN GIVEN A SPV M2000 IT ALREADY COMES WITH MEMORY CARD WHICH HAS TOM TOM INSTALLED ON IT EVERYTIME I PUT MEMORY CARD IN TOMTOM SCREEN COMES UP THEN I DONT KNOW WHAT TO DO HOW DO I USE THIS THING DO I NEED ANY ADDITIONAL STUFF
IM REALLY NEW AT THIS AND WOULD APPRECIATE ANY KIND OF HELP
PLS PLS EMAIL ME ON [email protected]
PLS EMAIL ME DIRECTLY ITS URGENT!
tomtom sat nav full package
Hi
I have a 1 GB memory card that has the latest tomtom installed(tomtom navigator 5). I use it for my XDA Exec. It also has alerts for speed cameras.
I am selling the memory card with tomtom software and also i have a brand new bluetooth GPS reciever.
Any one interested please make me an offer.
Thanks
I have a Holux M100 GPS unit i bought a few years back which works fine on my windows mobile, but i can seem to get any software to work with it on the Hero i have it paired but it always says "paired but not connected" please can someone help me out with this and point me in the right direction.
Not really an answer as much as a question. Why not just use the built in GPS receiver in the Hero?
peterc10 said:
Not really an answer as much as a question. Why not just use the built in GPS receiver in the Hero?
Click to expand...
Click to collapse
Well, with a Bluetooth GPS receiver, you can mount it in a better position to get a stronger signal.
I have this issue too with my Holux GPSlim 240. It works on my laptop and Nokia N95, but not with my Hero.
I think there isn't a Bluetooth GPS out there that is Android supported/compatible.
OK, but in reality the position of the Hero has never been a real problem to me when it comes to GPS (at least not one a nearby BT receiver could solve). It works fine in my car - mounted on a Brodit car mount close to eye-line. It works well in my pocket while walking (with the screen off and using the headphones to listen to guidance) And it works well at home, as long as I am near a window
Is that normal, or am I just lucky?
Same with me. Work perfectly as it should same as described by peterc10.
Why not just buy a car mount for the hero? you dont even need the "official" one you can get one with a grip that tightens and loosens and slot the phone in there. Then stick it to the windscreen as you would normally.
sidon100uk said:
I have a Holux M100 GPS unit i bought a few years back which works fine on my windows mobile, but i can seem to get any software to work with it on the Hero i have it paired but it always says "paired but not connected" please can someone help me out with this and point me in the right direction.
Click to expand...
Click to collapse
The Android 1.5 Bluetooth stack in the Hero is incomplete and thus almost certainly won't support external GPS modules. Also, given it has built in GPS, it is more likely than not that none of the GPS software currently available would support an external GPS unit anyway.
Regards,
Dave
I find this hard to believe, as my Holux 1000B simply creates a Bluetooth Serial port. And my GPS software such as TrekBuddy.net simply reads and pares the info which is dumped to the serial port.
I'll go home and try it.
I believe that the Bluetooth Serial Port Profile (SPP) was not supported in Android via public APIs (which applications need to actually use it) until Android 2.0.
Regards,
Dave
Once it is paired try tapping on it again to connect it.
The first time I paired my headset it said "Paired but not connected" and tapping one more time got it for me.
hi!
I just ordered an asus eee tab transformer for my car, as car entertainment system and navigation system. I am planing to invest some time o modify the hardware of the car to fit the tab optimately in.
One thing I'd like to do is to let the car command the tab for boot and shutdown. I am thinking of using the asus docking station interface of the tab but I have no pinout of this connector at the moment. Can anybody help here?
Maybe it is also possible to throw typical "next", "back", "play", "stop", ... commands? I am expecting an serial interface or something similar. Since I am an routined embedded developer, with a pinout this should be no problem.
The second thing is maybe a software thing.
I have an bluetooth car radio which supports one connection at the same time. The Idea was to use the Tab with bluetooth a2dp but with this connection all calls on my bluetooth phone are ignored. Is there something to establish a android to android bluetooth connection where the tap plays the roll of a bluetooth a2dp headset.
So for music and navigation:
Tab <-> CarRadio
For phone calls:
Phone <-> Tab <-> CarRadio
The other thing is, can the android tablet keep 2 bluetooth connections at the same time from the hardware point of view?
Ok, I think I wrote enough for now ^^
Hope somebody can help with any information.
interested in this
+1
me too
maybe someone has a good link to the asus support?
oops, sorry
fpdragon said:
hi!
I just ordered an asus eee tab transformer for my car, as car entertainment system and navigation system. I am planing to invest some time o modify the hardware of the car to fit the tab optimately in.
One thing I'd like to do is to let the car command the tab for boot and shutdown. I am thinking of using the asus docking station interface of the tab but I have no pinout of this connector at the moment. Can anybody help here?
Maybe it is also possible to throw typical "next", "back", "play", "stop", ... commands? I am expecting an serial interface or something similar. Since I am an routined embedded developer, with a pinout this should be no problem.
The second thing is maybe a software thing.
I have an bluetooth car radio which supports one connection at the same time. The Idea was to use the Tab with bluetooth a2dp but with this connection all calls on my bluetooth phone are ignored. Is there something to establish a android to android bluetooth connection where the tap plays the roll of a bluetooth a2dp headset.
So for music and navigation:
Tab <-> CarRadio
For phone calls:
Phone <-> Tab <-> CarRadio
The other thing is, can the android tablet keep 2 bluetooth connections at the same time from the hardware point of view?
Ok, I think I wrote enough for now ^^
Hope somebody can help with any information.
Click to expand...
Click to collapse
Something to consider when designing.
Not sure if this is going to be a permanent install or not. But you can easily set up your audio through the Hdmi instead of burning battery with your Bluetooth. At least you can still use your phone through the Bluetooth. You can also incorporate other monitors in other parts of the car. I was speaking to a car audio shop for this type of install myself a few weeks ago. I will try to get more details and report back. Was waiting for the desktop docking station to come out to really run with it.
tonyz3 said:
Something to consider when designing.
Not sure if this is going to be a permanent install or not. But you can easily set up your audio through the Hdmi instead of burning battery with your Bluetooth. At least you can still use your phone through the Bluetooth. You can also incorporate other monitors in other parts of the car. I was speaking to a car audio shop for this type of install myself a few weeks ago. I will try to get more details and report back. Was waiting for the desktop docking station to come out to really run with it.
Click to expand...
Click to collapse
Thanks...
Bluetooth battery burn would be no problem since I want to load the battery over the car. Anyway... I'm afraid that there won't be something like a "bluetooth router" so I have to use the analog audio out. That brings me to my first question: I need the pinout of the asus connector to control the tab over the steering wheel control.
I don't think anyone's figured out a pinout yet, and even if they do, it wont be as simple as "this contact is for play, this one is for skip, etc". All those most likely go through a usb interface. Not that that would be impossible, but if you're using bluetooth your headunit should support AVRCP for sending those commands over bluetooth. Most android devices only support 1.0 right now, but that still gives you play/pause, stop, next, previous, maybe ff and rewind too.
As an embedded developer here follows one idea that maybe can help you.
Why not using all via BT, I will say you prob looking for some BT support inside the kernel. If you find a similar application using linux (google it), maybe you can ported it to the transformer. Compiling the kernel with new drivers is very easy, then u just need to get into the software part.
Have fun.
Narog said:
As an embedded developer here follows one idea that maybe can help you.
Why not using all via BT, I will say you prob looking for some BT support inside the kernel. If you find a similar application using linux (google it), maybe you can ported it to the transformer. Compiling the kernel with new drivers is very easy, then u just need to get into the software part.
Have fun.
Click to expand...
Click to collapse
Thanks for your post!
I was thinking about a similar idea. Bluetooth could be an alternative but with bluetooth it won't be possible to switch the device on. So I tried to find a pinout and maybe I have luck to command a power on. Anyway... Right now BT seems the more realistic way, you're right.
Narog said:
As an embedded developer here follows one idea that maybe can help you.
Why not using all via BT, I will say you prob looking for some BT support inside the kernel. If you find a similar application using linux (google it), maybe you can ported it to the transformer. Compiling the kernel with new drivers is very easy, then u just need to get into the software part.
Have fun.
Click to expand...
Click to collapse
Android and the TF already support A2DP audio streaming and AVRCP remote control over bluetooth, there's nothing that needs to be done here. I'm pretty sure its only AVRCP 1.0 though, which only supports the basic controls (play, pause, stop, next, previous, etc). The newer versions also do things like metadata, so you can see on your headunit what song is playing.
I can say from experience that working with improving BT support in android is not easy after I spent a fair amount of time banging my head against the wall trying to add MAP support to CM7. In any case, without HC source it would be impossible to do here anyway.
fpdragon said:
Thanks for your post!
I was thinking about a similar idea. Bluetooth could be an alternative but with bluetooth it won't be possible to switch the device on. So I tried to find a pinout and maybe I have luck to command a power on. Anyway... Right now BT seems the more realistic way, you're right.
Click to expand...
Click to collapse
I'd bet that there's no way to power it up over the dock connector since the keyboard dock doesn't support it.
maxpower47 said:
I'd bet that there's no way to power it up over the dock connector since the keyboard dock doesn't support it.
Click to expand...
Click to collapse
Power it up maybe not, but wake it up certainly. If you allow the unit to be in deep sleep when you open the dock it wakes the unit. And as long as you are constantly feeding a small amount of power to it to keep it fully charged it shouldn't be a big deal. Maybe tear down a dock to provide an extra battery to the unit and perhaps the circuitry you need for wake on start of the car. I don't play with hardware so not sure what this would do but it seems it should be possible since it already does this to an extent.
captmiddy said:
Power it up maybe not, but wake it up certainly. If you allow the unit to be in deep sleep when you open the dock it wakes the unit. And as long as you are constantly feeding a small amount of power to it to keep it fully charged it shouldn't be a big deal. Maybe tear down a dock to provide an extra battery to the unit and perhaps the circuitry you need for wake on start of the car. I don't play with hardware so not sure what this would do but it seems it should be possible since it already does this to an extent.
Click to expand...
Click to collapse
Thanks Tor Your post...
Im Not sure hat this "deep sleep" is. is this the same like when i press the power button shortly on the tab or another power mode?
I have no dock and I wanted to save my money and not buy it.
Here's my situation: In my car, I often have my OG connected to my stereo with an A2DP bluetooth audio receiver (without a mic). This works well for listening to music, or getting directions from the nav. However, if I answer a call while connected to it, I can hear the audio through my car speakers, but the other person can't hear me. I understand that the OG's internal mic is disabled at this point, as it is expecting a bluetooth mic to be connected. The work-around I have found is to disable bluetooth for phone calls. This plays the call audio through the phone speaker, and utilizes the internal mic like normal speakerphone.
What I would like is a mix of the two. I want the call audio to play through the car speakers, but enable the OG's internal mic so I can talk through that. Does anyone know of an app or setting I'm missing that might accomplish this?
Thanks.
No, but that sounds like it would be really easy to code if you wanted to learn some java.
(Disclosure: I don't know java)
I was hoping to use this in the next few days. I don't think I can learn java that quickly. But I agree, it seems like it should be pretty easy to accomplish. Software turns the mic off, it should be able to turn it back on.
Digil said:
I was hoping to use this in the next few days. I don't think I can learn java that quickly. But I agree, it seems like it should be pretty easy to accomplish. Software turns the mic off, it should be able to turn it back on.
Click to expand...
Click to collapse
Hi Digil,
Did you find a way of doing this? I have a Galaxy Note 2 with the same setup in my car and I was wondering if you found a solution...
Thanks
Ishkatar
ishkatar said:
Hi Digil,
Did you find a way of doing this? I have a Galaxy Note 2 with the same setup in my car and I was wondering if you found a solution...
Thanks
Ishkatar
Click to expand...
Click to collapse
Hey Ishkatar, nope I didn't find a solution yet, but I haven't spent too much time looking. I've been busy with work and traveling to see family on this holiday weekend. I'll definitely post here if I find anything.
Sent from my Optimus G using XDA Premium HD app
Digil said:
Hey Ishkatar, nope I didn't find a solution yet, but I haven't spent too much time looking. I've been busy with work and traveling to see family on this holiday weekend. I'll definitely post here if I find anything.
Sent from my Optimus G using XDA Premium HD app
Click to expand...
Click to collapse
The SoundAbout app seems like it will work when the phone is connected to a headset (audio out through headset, input via phone mic). But I can't find anything that will accomplish that when outputting audio through BT.
http://android.stackexchange.com/qu...phone-input-and-headphone-output-on-nexus-one
Yes, I tried it and it did not work with BT... After much research and testing multiple BT Manager apps I decided to return the BT adaptor and I'll think about buying a full BT hands-free connector...
ishkatar said:
Yes, I tried it and it did not work with BT... After much research and testing multiple BT Manager apps I decided to return the BT adaptor and I'll think about buying a full BT hands-free connector...
Click to expand...
Click to collapse
Yeah, I think I might be forced to go with that Belkin adapter shown in the link above, which Is too bad because I was hoping not to spend anymore money, haha.
phone mic instead of bluetooth device
I had the same problem. I got fed up and decided to move the bluetooth mic to a more convenient location in my car, since I could not disable it. Before I re-positioned the un-soldered mic to a new location, I decided to make sure my soldering did not inadvertently damage any of the device. To my delight, without the mic being physically present, it defaulted to my phone mic. So, for me at least my problem was solved by removing the mic in question. I have no idea if it will work on other bluetooth devices.
any progress?
Just for info, after much research I don't think this is possible as Android does not allow routing of call audio to A2DP at all, probably due to security reasons?
I just plug a lead to the headphone jack and patch into the auxiliary input of my stereo. I also had one of those USB dongal Bluetooth receivers that worked exactly that way but it stopped working and other ones don't work, the one that did work was able to connect to phone audio as well as media audio. So it seems that if the mic can be disabled form the other end the Android mic will kick in. Android OS sucks you cannot do anything with the hardware. PC's piss over Google.
They probably don't do it because of latency error affecting feedback canceling. And what has external hardware got to do with security. Google just uses it as an excuse to getaway with marketing an inferior OS.
I wonder if I can replicate this. I need to kill the awful mic in my car Bluetooth so I can use phone mic
Has anyone tested this with non-native Calls like Skype, Facebook Calling, Zoom.US, what's app etc.?
it's totally unacceptable that I can use A2DP stereo audio + Computer Built in Microphone, but I can't do this with android!
Companies are taking off the headphone jack but they haven't figured out HD Bluetooth microphones yet!
Are any updates on this thread? maybe some apps could rout mic?
z-dima said:
Are any updates on this thread? maybe some apps could rout mic?
Click to expand...
Click to collapse
You can check this app https://play.google.com/store/apps/details?id=com.nordskog.LesserAudioSwitch&hl=en, havent checked for myself but it worked for my friend
This may be such an unusual use case that it hasn't been an issue for anyone other than me, but here's to hoping for a solution...
I've just bought a new car (2015 Honda Fit) which has a decent size LCD panel in the dash (but I opted not to get the expensive navigation system) and which also has full bluetooth integration and, surprisingly, an HDMI port for the screen. HDMI is one of the "source" settings, and Bluetooth is a separate one.
I've paired my Nexus 5 to the car in order to take and make phone calls and get the other integration features such as music and podcast playback over the car's audio. I had this idea that if I were to run the Nexus 5 through the large screen using HDMI (via a Slimport adapter), I can have a much nicer Google Maps based navigation system that would give something close enough to the experience of the in-dash nav system minus the touchscreen -- which is fine, as I can set the route, put the phone in a cupholder, and not bother with it again.
Now, here's the fatal snag. While the phone is paired to bluetooth, it insists on sending 100% of its audio through Bluetooth and doesn't send it through HDMI. The car is either-or on the sources. If it's on HDMI, it only plays back HDMI. The screen displays exactly as I hoped -- but no audio at all (again, it's going to Bluetooth). Now, I can switch over to Bluetooth and hear the sound but not get the display. I could kill the pairing to get both through HDMI, but now I lose the ability to receive calls over bluetooth with the handy steering wheel call answering and all of the amenities associated with that.
I'm wondering if there is some kind of workaround -- Android configuration that I've somehow never noticed, or a third party app -- which will allow the Nexus 5 to remain paired and actively Bluetooth connected while still sending audio through the HDMI port (Slimport). I don't see that this would as likely be a car-side solution.
The Nexus 5 is rooted stock 4.3.3.
Thank you in advance for help toward a solution.
qaelith.2112 said:
This may be such an unusual use case that it hasn't been an issue for anyone other than me, but here's to hoping for a solution...
I've just bought a new car (2015 Honda Fit) which has a decent size LCD panel in the dash (but I opted not to get the expensive navigation system) and which also has full bluetooth integration and, surprisingly, an HDMI port for the screen. HDMI is one of the "source" settings, and Bluetooth is a separate one.
I've paired my Nexus 5 to the car in order to take and make phone calls and get the other integration features such as music and podcast playback over the car's audio. I had this idea that if I were to run the Nexus 5 through the large screen using HDMI (via a Slimport adapter), I can have a much nicer Google Maps based navigation system that would give something close enough to the experience of the in-dash nav system minus the touchscreen -- which is fine, as I can set the route, put the phone in a cupholder, and not bother with it again.
Now, here's the fatal snag. While the phone is paired to bluetooth, it insists on sending 100% of its audio through Bluetooth and doesn't send it through HDMI. The car is either-or on the sources. If it's on HDMI, it only plays back HDMI. The screen displays exactly as I hoped -- but no audio at all (again, it's going to Bluetooth). Now, I can switch over to Bluetooth and hear the sound but not get the display. I could kill the pairing to get both through HDMI, but now I lose the ability to receive calls over bluetooth with the handy steering wheel call answering and all of the amenities associated with that.
I'm wondering if there is some kind of workaround -- Android configuration that I've somehow never noticed, or a third party app -- which will allow the Nexus 5 to remain paired and actively Bluetooth connected while still sending audio through the HDMI port (Slimport). I don't see that this would as likely be a car-side solution.
The Nexus 5 is rooted stock 4.3.3.
Thank you in advance for help toward a solution.
Click to expand...
Click to collapse
I can't help ith your situation, but I'm wondering if you can help with mine. I also just bought the 2015 Honda Fit. What I want to be able to do is mirror my Galaxy S4 to the screen for navigation purposes. But from what I understand, it will only work in Park. I don't have the cable yet and did't want to buy it unless I knew it would work.
For a quick test, I plugged a roku stick in the HDMI port. As expected, it worked fine until I put the car in gear. Then the display gets disabled. Does this happen with phone mirroring? Would I be able to actually use google maps and see it while in motion or will the screen shut off? What does and doesnt work with mirroring?
samseed101 said:
I can't help ith your situation, but I'm wondering if you can help with mine. I also just bought the 2015 Honda Fit. What I want to be able to do is mirror my Galaxy S4 to the screen for navigation purposes. But from what I understand, it will only work in Park. I don't have the cable yet and did't want to buy it unless I knew it would work.
For a quick test, I plugged a roku stick in the HDMI port. As expected, it worked fine until I put the car in gear. Then the display gets disabled. Does this happen with phone mirroring? Would I be able to actually use google maps and see it while in motion or will the screen shut off? What does and doesnt work with mirroring?
Click to expand...
Click to collapse
This behavior of the HDMI port / display actually became a far bigger problem than how to route the sound. I had been doing all of my testing with the car sitting in the garage, and because I wasn't ever able to get the sound to do what I needed, I didn't bother to go drive around with HDMI display enabled. I confirmed through this and consulting the manual that for "safety reasons" they have entirely disabled the HDMI input while the car is not in park. Unfortunately, I'd guess this is coded in the system's firmware which most of us aren't going to have a way to tamper with, so this is a fatal problem for what we're both looking to do. I was confident that there was probably some sort of solution to making audio go over both channels, but that's irrelevant in light of this problem.
So to summarize, I'll suggest not bothering with the Slimport (or the other kind of interface, if that's what your phone uses) because it will certainly be utterly useless for this and I don't foresee a solution. It looks like this thread is therefore dead. Thank you for bringing this to my attention, though -- I'd have continued working toward an audio solution and then discovered this bigger problem once I solved that one. You just saved me from wasting a lot of time.
samseed101 said:
I can't help ith your situation, but I'm wondering if you can help with mine. I also just bought the 2015 Honda Fit. What I want to be able to do is mirror my Galaxy S4 to the screen for navigation purposes. But from what I understand, it will only work in Park. I don't have the cable yet and did't want to buy it unless I knew it would work.
For a quick test, I plugged a roku stick in the HDMI port. As expected, it worked fine until I put the car in gear. Then the display gets disabled. Does this happen with phone mirroring? Would I be able to actually use google maps and see it while in motion or will the screen shut off? What does and doesnt work with mirroring?
Click to expand...
Click to collapse
One more thought (stating the obvious, I suppose) -- We've been hamstrung by the assumption that everyone is going to be using the display to watch movies while driving, even though we have excellent reasons which would actually make it safer (an easier to see navigation display). I guess Honda is mitigating lawsuits from the would-be idiots who might actually be watching American Idol episodes while driving to work.