Seeing as my last thread was closed with no reason indicated, I'll ask again!
Hello,
Please advise how I would go about installing a rom on my standard G4!!
I have the following specs:
Rom Versie: 2.18.7.6 NLD
Radio Versie: 02.07.10
Protocolversie: 413.1.03
ExtROM versie: 2.18.7.9312
Microsoft Windows Version 5.1.195 (Build 14847.2.0.0)
I've run HardSPL and is installed
IPL: 2.21.0001
SPL: 2.21.Olip
OS: 2.19.7.6
What can I do from here?
I was looking at [31/Mar/09] WM6.5 (with CHome+LockScreen) | IE6 (No Widgets). Can I install this or will it not work?
Please help!
I've waited 3 days with not one response, not very nice for such an active forum... I've got a Dutch Wizard I can't use as I don't understand the language and noone can be bothered to help!
All I need to know is if I can flash the above Rom, or if there's a more suitable one.
Jason
28 Views and no help?
Come on!
hello!
Bayton said:
28 Views and no help?
Come on!
Click to expand...
Click to collapse
your device is unlocked now, is a G4, so search any ROM G4 safe!!
there are a lor made by CRACING and HASSEB,
try until you get the right ROM to you ok?
good luck!
Thanks for the response,
The one I posted (link in the post)
Is that not G4 safe? Can I just install straight over my existing standard rom?
The last thread will have been closed because best ROM discussions are pointless. What you want isn't what I want . Try a few ROMs and see what you like.
I read the first few pages of the ROM link you posted and it clearly states it is G4 safe. If you are unsure, why not post in the relevant thread and ask (you may get a bit of a roasting though ) rather than create a new one.
Thread Closed.
Dave
Related
Hey all,
I have just purchased an iMate JasJam from Telstra (was a cheap display model) and i have signed up to three mobile. I want to access planet three and do everything as if i had brought the phone on three.
Can i just install the Dopod 838 Pro ROM?
Can someone post a link to a Dopod ROM? as im not allowed into the dopod website due to me not actually owning a dopod!
Any help greatly appreciated!
Regards,
Geordie
Check the Wiki, mate...
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Look for Dopod in the WWE Versions list...
Baggy
And if i download the Dopod 1.30.707.4 08/22/06 and install it, it will work correctly?
geordieb said:
And if i download the Dopod 1.30.707.4 08/22/06 and install it, it will work correctly?
Click to expand...
Click to collapse
To use planet 3 all you have to do is type three.net.au in ie.
before you can do that you will need the settings for 3services, 3mms and or 3netaccess configured. There is a tool that does it on wm6. link is below, you can try it for your WM5 rom. The dopod rom will only serve you to remove any telstra programs. If the cab program below doesnt work there is a thread which has the settings for you to enter manually.
*edit* the cab file has been removed from the thread (first one below) you will have to check back again to get it.
http://forum.xda-developers.com/showthread.php?t=299023
http://forum.xda-developers.com/showthread.php?p=1211919&highlight=australia+cab#post1211919
Dopod ROM for 3 Aus
Dopod have released a ROM update specifically for 3 in AU on 2007/03/28.
The version number is: v1.30.707.8 and it states as follows:
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
As i'm not on 3 (using Black 2.0 WM6 using Vodafone AU here) i havent actually downloaded it for myself and from the look of it, its not even mentioned on the Wiki so i cant tell you exactly whats different from the generic AU ROM v1.30.707.4 released on 2006/12/01.
If you cant find it anywhere else, maybe I could download it and get it to you somehow!
Cheers,
Chris
Dopod have released a ROM update specifically for 3 in AU on 2007/03/28.
The version number is: v1.30.707.8 and it states as follows:
838Pro (WM5) ROM code for Hutchison ‘3’ network - version 1.30.707.8 This ROM code will allow you to fully utilize the Planet 3 services.
As i'm not on 3 (using Black 2.0 WM6 using Vodafone AU here) i havent actually downloaded it for myself and from the look of it, its not even mentioned on the Wiki so i cant tell you exactly whats different from the generic AU ROM v1.30.707.4 released on 2006/12/01.
If you cant find it anywhere else, maybe I could download it and get it to you somehow!
Cheers,
Chris
Click to expand...
Click to collapse
Hey mate,
Yeah, i cant log into the dopod site as i have an imate so it doesnt accept the serial number. If you could download it and post it on a filesharing site or something, that would be awesome. I know they are fairly big so i assume that writes email out (i have space, im on gmail)
Also, is WM6 good? where do i upgrade?
Thanks so much for your help
No probs mate, its uploading to www.megaupload.com now, i'll update this post with a link when complete. (approx 25 mins to go)
EDIT: Here is the link to the Dopod ROM: http://www.megaupload.com/?d=OY2IJE79 (I'll update the Wiki with this link soon)
EDIT2: I have updated the Wiki with this ROM info. As i haven't installed it, i can't confirm the exact radio, bootloader etc versions however i believe its just minor changes from the previous release so have left most of the versions the same. http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
As for upgrading, before you do anything i would read, read and read as much of the XDA Wiki as you can. If you havent flashed any ROM's on your JasJam before you will need to do this before uprading to the Dopod ROM as your JasJam will most likely still be locked down to i-mate ROM's only and the Wiki explains exactly what you need to do.
The link to the Wiki is here ---->> http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
As for upgrading to WM6, the same advice applies. All the information you need is in the Wiki or the Hermes Mobile 6 forum and as long as you read carefully before doing anything you should be right to go.
Puckster said:
No probs mate, its uploading to www.megaupload.com now, i'll update this post with a link when complete. (approx 25 mins to go)
EDIT: Here is the link to the Dopod ROM: http://www.megaupload.com/?d=OY2IJE79 (I'll update the Wiki with this link soon)
EDIT2: I have updated the Wiki with this ROM info. As i haven't installed it, i can't confirm the exact radio, bootloader etc versions however i believe its just minor changes from the previous release so have left most of the versions the same. http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
As for upgrading, before you do anything i would read, read and read as much of the XDA Wiki as you can. If you havent flashed any ROM's on your JasJam before you will need to do this before uprading to the Dopod ROM as your JasJam will most likely still be locked down to i-mate ROM's only and the Wiki explains exactly what you need to do.
The link to the Wiki is here ---->> http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
As for upgrading to WM6, the same advice applies. All the information you need is in the Wiki or the Hermes Mobile 6 forum and as long as you read carefully before doing anything you should be right to go.
Click to expand...
Click to collapse
Have you got the ExtROM for this ROM version?
ROM Ver: 1.30.707.8
ROM Date: 12/13/06
Radio Ver: 1.16.00.00
Protocol Ver: 35.53.7018.01H
Binyo said:
Have you got the ExtROM for this ROM version?
ROM Ver: 1.30.707.8
ROM Date: 12/13/06
Radio Ver: 1.16.00.00
Protocol Ver: 35.53.7018.01H
Click to expand...
Click to collapse
y dont you download the nbh and extract it?
walshieau said:
y dont you download the nbh and extract it?
Click to expand...
Click to collapse
I already have the ExtROM but I couldn't find the network wizard cab file.
Can anybody upload the NetWiz.cab from 838Pro (WM5) ROM code for Hutchison ‘3’ Australia Network - version 1.30.707.8?
Thanks in advanced.
These settings are pretty hard to find. I think it's all I've done all night.
Courtesy of a thread on Aussie3G, I got a link to a thread on this site.
http://forum.xda-developers.com/showthread.php?t=298936
Amongst the attachments on that thread is a "CWW Enterprises AUS Operator Con.cab"
This program has configuration settings for the Australian carriers, including "Three".
I've just run it and it's created 3mms, 3services & 3netaccess, but I'm still having troubles with email. I'll be leaving it to another day now.
If you can get it all working, please tell me how
Cheers, Oggy.
User Agent String From 1.30.707.8 PIE
Hi can anybody on 3AU with the latest firmware from Dopod; 1.30.707.8, go to this web site; "www.useragentstring.com" with pocket IE and post the results from "your user agent string box" your help would be greatly appreciated
Since Dopod838 is now officially supported on X series and Planet 3, im trying to get Black 3.5 working with it completely.
Hello !
I have a Qtek S200
IPL: 2.10.0001
SPL: 2.10.0001
GSM: 02.69.21 (the last i think and applyed for me)
OS: 2.10.7.24 PTG (Portugal,Vodafone but already unlocked for me.thanks to all)
Now, the questions:
1 - It's a G4. Rigth? So, no easy update because CID. Rigth?
2 - What the best rom i can apply? About the language, i prefere english !
3 - On the forum where i can find instructions to apply the update
4 - It's possible run a ROM like PDAVIET 4.0.0.6 TOUCHFLO om my device. Is possible (having a G4) ?
Sorry for this questions, but i just buy my S200 today and i not want to have a "brick"
Tanks, Friends for all support you may give me !
P.S - Sorry moderators, if this questions are already posted and answered but this forum it's so big and so PRO , i just i'm lost my self !!!!
1. It's a G4. Easy update if you update OS only.
2. Go for http://forum.xda-developers.com/showthread.php?t=319206 PV 6 or Gullum TNT
3. http://forum.xda-developers.com/showthread.php?t=310452
4. Yes. Very much possible
Only one more question
Mousum said:
1. It's a G4. Easy update if you update OS only.
2. Go for http://forum.xda-developers.com/showthread.php?t=319206 PV 6 or Gullum TNT
3. http://forum.xda-developers.com/showthread.php?t=310452
4. Yes. Very much possible
Click to expand...
Click to collapse
Tanks for your help
About question 4, please be more specific. This the more important question for me. I like very much the TOUCHFLO. Please.
Best regards
It is possible. No problem. Since it updates the OS part only, so it doesn't matter whether it's cid locked or not This matter arises only when you are trying to change in to some official rom, but those can be taken care of also.
Don't worry, just follow the instructions and update. And don't forget to hard reset at the end. Good luck
Tanks bro
Hello !
Tanks "bro" !!!
I will try !
Wish me luck !!!!
Tanks in advance !
Hello!
I'm very unsure how I can update my G4 CID looked.
1. Which updateway is recommendable?
2. Can I use all Prophet Roms?
greetz Ben
Can everybody help me please?
I'm still waiting for an answer!
look in the xda-wiki ... you found the right discription.
Not Realy! I have read the wiki and all usefull threads 2 days before!
1. There are different updateways in different foren, threads and wikis and all are for G3. Some users, which have a G4 model write that you have to notice a few points, but the answers are not very clearly.
2. In the german XDA forum they tell me that I can use every prophet rom! BUT: In the wiki is written that the G3 and G4 devices have different hardware! So it is very illegitimate that I can use the same rom!
Please help me! In my statement you can see that I'm very careful because I don't want to brick it!
no you haven't,as i see !
Do you think that I'm lying? Maybe I'm blind or stupid!
1. I don't want that you tell me the updateway. A link to the tutorial which you use / would use will be ok!
2. I can see that you has a normal prophet rom. So I think that the answer is YES?
I've got the same problem. This forum is great, no doubt, but it's a MESS. I couldn't find a clear answer regarding flashing a CID LOCKED G4 Prophet.
Can I flash radio roms ? What about extrom ? Can I just flash Gullums Touch VII right away after flashing NVID rom from here http://forum.xda-developers.com/showthread.php?t=310452 ? Can I even flash this NVID rom to CID LOCKED G4 ?
Lots of questions and for every one I can find 20 different answers, so I'm pretty confused. Maybe someone with the patience can clarify all of that, we don't want to brick our precious Prophets.
Juhuu! A further confused man!
So let's collect our incomplete knowledge together!
I read about a tool, shelltool with it you can update a CID locked device!
http://forum.xda-developers.com/showthread.php?t=293480
I'm reading the full thread at the moment!
My rom question is still open! If I find an answer I update my device with the shelltool!
greetz Ben
OK i see your Problem!
You can Flash all Roms with the NVID Flashtool. You can only Flash Roms with this tool, if no IPL and SPL is included! WM6 Roms use too ways to Flash it. Read the Threads about this WM6 Roms ... you need only to start the Update.bat or simulare bat file ... possible a NVID Flashtool. Some Roms have two bat files for G3 or G4 Device. Use the right! Radio Roms use everytime the NVID Flashtool and work everytime with locked devices.
You dont need the Shelltool way ... this is more Hardcore for develope.
Tank you very much for your answer!
In fact:
-I can flash every prophet rom which has a G4 bat?!
-I can flash every prophet Rom which has no IPL, SPL with NVID flashtool?
My G4 runs WM6 now!
After again 5 hours investigation I know that you CAN'T kill your device with the prophet roms! When all people say "the device is bricked" they don't mean that nothing happens! They say "bricked" if the ppc stuck on the SPL/ISP screen or the bootloader. And both can be fixed with a RUU update like Prophet_PV_Temp or the original O2 rom!
Frtzrwk:
I upgraded to PDAVIET Touch 4.0.0.6!
You can get the link to both RARs in the thread.
First: Prophet_PV_Temp
For Up/Downgrading to Aku 2.2 (WM5)
Second: PV_4.0.0.0.6_Touch
The Real WM6 Rom
-Download and extract!
-Start "ROMUpdateUtility_NV_G4", which install Aku2.2
#wait 10 minutes, your ppc restart automatically
-After the PPC is fully started, you install first "Cert_SPCS" and then "EnableRapi" (you can find the two files in PV_4.0.0.0.6_Touch)
#wait 1 minute and restart your device
-Now you can update your Rom with "Upgrade_Rom"
#wait ~15 minutes
-Hardreset your device! IMPORTANT!!!
Welcome to your new WM6 installation!
If your device stuck at the ISP/SPL screen (loading more than ~5 minutes), go into bootloader (camera + reset) and start again with upgrading to Aku2.2
greetz Benne
This was all in the wiki
See http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
then
WM6 Upgrade Guide
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
And your device can go to heaven when your flashing the wrong rom to a wrong device...
The answer was for Frtzrwk because he is confused too!
So shut the **** up...
I don't think so! Were is written in the f**k wiki that I can use ALL prophet roms!
There is olny one information about G4:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
So the hardware is not the same!
And by the way: I hate rapidshare... test the links!
And when everybody flash a trium rom or another **** rom they shouldn't buy a PPC!
I don't care!
friendly greetz Ben!
P.S. Many thanks to NetrunnerAT for the only usefull answer in this thread and to gullum for his fileservice + great rom!
yes
ok new menber
Ihave o2 mini uprom die
What? I can't understand you!
Hi,
I know this has been answered probably but I got confused as most of the posts talk about 7500 or 7510 and SPL 1.2 or something higher.
I have a HTC x7501 with SPL v1.10.0000 and the IPL is v1.00. My radio version is 1.47.51.00 and ROM version is 2.19.453.4. The OS installed is Windows Mobile 6 Professional.
My question is can I upgrade to AP4 rom? Do I have to unlock my device first? It does accept different SIMs now. Is there a step by step instruction to do the AP4 rom upgrade specific to my model?
literally 6 threads blow this one is this thread
http://forum.xda-developers.com/showthread.php?t=429013
please look around next time
its for all athena x750* devices
Hi Rorydaredkign, thanks for you prompt reply. I did look into the thread that you mentioned including other related posts. But I kind of got lost in all the version no. etc. Probably I am too new to try these things.
Also the link for the Olipro video does not work. Is there another link for this? Am I correct to assume that the unlocking/upgrading is similar for both x7500 and x7501? As the tutorial is for x7500.
I will appreciate any help in this regard.
maxmin420 said:
Hi Rorydaredkign, thanks for you prompt reply. I did look into the thread that you mentioned including other related posts. But I kind of got lost in all the version no. etc. Probably I am too new to try these things.
Also the link for the Olipro video does not work. Is there another link for this? Am I correct to assume that the unlocking/upgrading is similar for both x7500 and x7501? As the tutorial is for x7500.
I will appreciate any help in this regard.
Click to expand...
Click to collapse
Hello and welcome to the forum,
Good advce from Rory there and also I have given this advice lots of times before and to you no different. please go HERE and read and learn, if you TAKE YOUR TIME AND READ you will learn. Please Please Please do not try to run before you can walk, or your Athena will be Bricked. I have been flashing ROM's for years now and still make the occasional mistake through rushing in to fast. AP 4.0 is a very good ROM but there are better ROM's now in my opinion. When you are READY try one of Michy's ROMs on spl 1.2.
Good luck and use the search button!!!
Regards
Jay
Hi Guys, I have just bought a UK 02 XDA Mini S (Wizard), I have checked the boot screen and have :
ipl 2.21.0001
spl 2.21.0001
gsm 02.07.10
os 2.21.4.1
I am wanting to stick WM 6. (whatever the current best ROM is)
I would also LOVE to get the coverflow software going that I have seen on YouTube.
I am reading through hundreds of pages, but as yet have to identify how best to re-flash my Wizard. I have worked out that it's CID Locked and a G4 unit, but then I draw a TOTAL blank.
Can anyone point me in the right direction??
I have just got through installing XP (also have a Vista system), so am ready, willing, just not yet able.....
Any up to date tips??
Cheers,
Rich
Use this link to learn how to unlock your device (be careful, read all the things that you find):
http://forum.xda-developers.com/showthread.php?t=329147
Use this link to learn how you can upgrade your device (be careful, read all the things that you find):
http://wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
One more thing, Please search before you post.
Best Regards.