Are there any skin cases for the Wizard, like the iSkin ?
Ideally, with a slot on the bottom for the keyboard...
There is already a silicone case for the dopod 838 [WIZA100] unfortunately you can't use the keyboard with the case on. I'm using this case until I find a nice leather case or metal case for my dopod. it seems all the cases coming out are for the Qtek and O2 versions [WIZA200?].
where can you get hold of one of these skins
They are widely available at Wan Chai Computer Center in Wan Chai Hong Kong or Mongkok Computer Center. If I recall correctly they have Frosted White, Blue, Pink, Black [which I have] it's around HKD 100 [of course you can haggle a bit]. Remember this is for WIZA100 [dopod 838] and will not allow you to use the keyboard. See the pic...
i've seen the same thing, i think on ebay, for the wizard wiza200 but i doubt you could slide open the keyboard on that one aswell..
I doubt they'll be able to make a silicone case that allows free use of the keyboard [although I hope I'm wrong]. The slider seems to pose a big problem in case making.
bnycastro said:
They are widely available at Wan Chai Computer Center in Wan Chai Hong Kong or Mongkok Computer Center. If I recall correctly they have Frosted White, Blue, Pink, Black [which I have] it's around HKD 100 [of course you can haggle a bit]. Remember this is for WIZA100 [dopod 838] and will not allow you to use the keyboard. See the pic...
Click to expand...
Click to collapse
Hi Bnycastro,
Would the Dopod 838 Skincase fit the Tmobile MDA Vario?
edojo: AFAIK the Tmob MDA vario is a WIZA200 model. So it wouldn't fit as the dopod 838 is a WIZA100 model [the VPA Compact and the Cingular 8125 are WIZA100s] Qtek9100/imate k-JAM are WIZA200's. Hope this helps.
Go to boxwave.com and make a request. They claim that if they get enough requests they release the product. Go to the link at the bottom to request a product for a device and then make sure "Flexiskin" is checked. It is probably a good idea to mention all the Wizard's aliases (MDA Vario, Qtek 9100, I-mate K-jam) so they see it is a device in alot of user's hands. I owned one of these for my Treo and it was outstanding.
Made a request, we'll see if they see any money in it...
Just get mine from eBay, cost me $26....but it works good
This case not only hold the PDA, but also hold two miniSD cards.
Just ordered one from Piel Frama: http://www.pielframa.com
For the Wizard specifically: http://www.pielframa.com/menu_qtek9100.htm
Aluminum Case? Anyone have this?
The Monaco T-Mobile MDA Aluminum Metal Hard Case
http://www.wirelessground.com/motmdaalmeha.html
yeah - i have one and it's ace
Re: Aluminum Case? Anyone have this?
ewb110 said:
The Monaco T-Mobile MDA Aluminum Metal Hard Case
http://www.wirelessground.com/motmdaalmeha.html
Click to expand...
Click to collapse
Yep - had one for ages - works great.
Everso.
cutoffcirc said:
Go to boxwave.com and make a request. They claim that if they get enough requests they release the product. Go to the link at the bottom to request a product for a device and then make sure "Flexiskin" is checked. It is probably a good idea to mention all the Wizard's aliases (MDA Vario, Qtek 9100, I-mate K-jam) so they see it is a device in alot of user's hands. I owned one of these for my Treo and it was outstanding.
Click to expand...
Click to collapse
Don't know if people are still looking, but boxwave has skin cases and aluminum cases now:
http://www.boxwave.com/products/easyfinder/buy-best-htc-wizard-cingular-8125-accessories_1160.htm
halfsoul said:
cutoffcirc said:
Go to boxwave.com and make a request. They claim that if they get enough requests they release the product. Go to the link at the bottom to request a product for a device and then make sure "Flexiskin" is checked. It is probably a good idea to mention all the Wizard's aliases (MDA Vario, Qtek 9100, I-mate K-jam) so they see it is a device in alot of user's hands. I owned one of these for my Treo and it was outstanding.
Click to expand...
Click to collapse
Don't know if people are still looking, but boxwave has skin cases and aluminum cases now:
http://www.boxwave.com/products/easyfinder/buy-best-htc-wizard-cingular-8125-accessories_1160.htm
Click to expand...
Click to collapse
Yes that's been available for ages. I think what most of us here want is a skin case for the Wiza200 (instead of the Wiza100).
Ah, my mistake. Good luck, then 8)
man, why is it so difficult to find a skin for the TMO MDA.
yea and after seing this looks like we may never see one. the new phones got them already so we probably wont see one.
Hi,
I know the QTek 2020 has a backpack module, which is an extended battery + CF card reader + VGA output. I looked for something similar for QTek 9090, and some places claim it should have a similar accessory (mostly old blurbs about Blue Angel). Unfortunately, I have been unable to locate a single place which sells the QTek 9090 backpack. QTek 2020's backpack is ery rare too, but it can be found in some places... and it seems it is not compatible with QTek 9090.
Does it exist? Anyone can point a shop which sells it? Or was it an announced product which never materialized (aka vaporware)?
they dont support them
Is it worth buying something which is designed specifically for the Hermes or does a cheap generic one do just as good a job?
I'm willing to spend a bit extra is the holder is better quality.
If anyone has a decent holder could you let me know the brand/where you got it from.
In my experience, The Brodit holders are superior. They have excellent fit, and some come with built-in charging (active holders) for additional convenience.
yes, anything by Brodit - expensive but worth it.
I am not very much convinced with their website's photos.
I have ordered dwo desktop cradles from expansys: HTC-branded, and from ORA, plus a car holder by Carcomm. I will review and post photos when they (finally) arrive.
Another vote for Brodit. See my pics in this thread:
http://forum.xda-developers.com/showthread.php?t=280439
I can recommend a unit by Carcomm, available at Handnav.
http://www.handnav.co.uk/product_details.php?id=2292
I've been using it for 3 weeks, very pleased with. You can get power cables for various GPS receivers too.
HTH
Mike
i am using a cheap car holder from Hama. it's doing its job and i paid only 20euro for it
My vote goes to the Brodit holder. Use it for several months now and charge my tytn without problems. Also i have one for my dell axim pda.
Brodit holders are a perfect fit.
i just use a generic pda holder bought form ebay, i think the ebay store was t-dimension.
it cost me $5 AU + postage. It is an anti-vibrate model.
This holder together with a TYTN car charger ($20 AU) is a practical and cheap (money wise) solution.
There is ONLY one place to buy from and it is...
www.proclipusa.com
I have no affiliation with them but I have bought holders for 2 different vehicles from them. The quality is very high. And they have basically taken every single vehicle out there and figured out how to mount your ohone as if it were a factory option. The location of the brackets is different for all vehicles and the fit on the phone and on the car is perfect.
I hope you enjoy, just as I have.
Using the Brodit cradle here, fantastic bit of kit which works perfectly. Recently used it on a 2500KM car journey and it was perfect the whole way!
Does anybody know which holder is compatible with the extended batteries?
I got this one at radio shack for 16.00
http://www.radioshack.com/product/index.jsp?productId=2103140&cp
add to it a retractable miniusb cigarette charger (for the RAZR) at wal-mart for $10.00
That looks right along the lines of what I want - I don't think it would hold the LION Battery pack with the Hermes though :/
I am reluctantly having to let my SPV M2000 go after many happy years. I thought I would give the enthusiasts a shout at it first before it hits the bay.
It is running WM6.1 build 5.2.20262 (flashed this week) . It only has a 256Mb card in it but has 2 batteries, 2 stylus, desktop dockingstation/charger, the hip carrier and the original headphones . It also has the original orange manual but that is mainly redundant as it only covers WM2003.
Screen is scratch free and case is practically mint, just below normal wear on the slide part of the case and a couple of very very small and unnoticeable
marks on the corners. Photos can be emailed to interested parties.
Oh yeah, it is unlocked to all but 3.
£75.00 + Postage (About £8.00 I think)
Will put it on the bay next weekend if no offers are forthcoming.
I am in the UK
Some people seem to have some luck with iPhone cases for their TP2 (the soft fabriccy type ones) but can't seem to find any that fit the TP2 nicely.
Anyone have any recommendations for a soft case for TP2 (ideally UK if possible) or any specific iPhone cases which work nicely for the TP2
Thanks in Advance
Ive just ordered one of these
http://cgi.ebay.co.uk/Original-HTC-..._MobilePhonesCasesPouches?hash=item56361e9b0a
Cheap and cheerful.
ive bought from these before and it takes a long time to come but have always been good quality, especially for the price.
it depends what you want i spose. i'm still using a pouch i bought for my Touch Pro for 1.99 that fits perfectly.... from the same seller. they also do a neoprene one for the Hero that i bought my wife and that fits my TP2 too
I just had a look and i'd be suprised if this one didn't fit, for 3 quid its probaly worth a punt!
http://cgi.ebay.co.uk/OEM-HTC-Touch..._MobilePhonesCasesPouches?hash=item5635c97e17
I bought a maya case from www.proporta.com for my touch pro 1, that fitted ok, but it fits the TP2 like a glove!
http://www.proporta.com/F02/PPF02P05.php?t_id=4254&t_mode=des
tho only apear to do it in orange?
there was about 10 different colours when i bought mine?
or all versions with sizes, matbe another not orange one that fits
http://www.proporta.com/search?q=Maya
Cheers guys