hi
i just bougth a bluetooth stereo headset hbh-is800. it works great in handsfree mode to call, but if i use it as stereo headset to listen to music i am unable to change the volume. it always keeps at a very silent level. is there a way to change the bt audio volume on windows mobile?
i also tried coreplayer, but it is still very silent.
thanks
Does it do the same thing on a wired headset? Also, have you checked in HD Tweak or Advanced Config to see if the volume / dB limit is raised to 100?
no, it the wired headset works perfectly. the bluetooth stereo headset has no volume control, it depends on the mobile to adjust the volume. but the bluetooth volume is not changed if i change the volume on the mobile. it always keeps very low. i will check on the two tools you recommend.
thanks
david
any information on this???
Related
How do I get all audio on my Verizon Touch Pro to play through my bluetooth earpiece?
With my Motorola Q, I connected the bluetooth device, it changed to a Headset profile and all audio (tcpmp, windows media, etc) played through the bluetooth device.
When I connect the same bluetooth earpice to my Touch Pro, the only time it activates is if I hit voice command or once a call is connected.
I also have bluetooth stereo headphones with that stereo profile and those do get audio from Windows Media player.
How do I get audio from TCPMP/Windows Media to play through the Hands Free profile that the bluetooth earpieces I have use?
Anyone able to help with this? I'm disappointed that I can't listen to audio through a bluetooth headset with the hands-free profile.
There has to be a simple fix.
Tap and hold the name of the headset and tap 'Set as Wireless Stereo.'
That option is grayed out for my mono headsets.
Any other ideas?
lexluthor said:
That option is grayed out for my mono headsets.
Any other ideas?
Click to expand...
Click to collapse
that is because your headset is not a2dp. what you did before was just have the crappy audio go across your headset without true a2dp so the sound was pretty bad. i have jabra bt8010 and sometimes i have to refresh the option on my headset to set wireless stereo. if i don't, the audio is piss poor because i'm just piggy backing ontop of the voice command audio stream.
sidwin said:
that is because your headset is not a2dp. what you did before was just have the crappy audio go across your headset without true a2dp so the sound was pretty bad. i have jabra bt8010 and sometimes i have to refresh the option on my headset to set wireless stereo. if i don't, the audio is piss poor because i'm just piggy backing ontop of the voice command audio stream.
Click to expand...
Click to collapse
Yes, I understand that.
But, my question is how can I get audio to come through my mono bluetooth headset when it's connected? On my Motorola Q, ALL audio routed through the headset when it was connected. On the TP, only if I start voice command or make a call does audio get sent to the headset.
I use the headset to listen to podcasts, so that's what I'm looking for.
I did find a program that would route all audio through the headset, but I do have to run it each time I connect the headset. I suppose that will suffice though.
Hi, how can I boost BT Headset volume on my HTC S740?
Is there a way to use radio FM without using wired headset?
Many thanks,
qtek70 said:
Is there a way to use radio FM without using wired headset?
Click to expand...
Click to collapse
Not as far as I know. The wired headset is actually used as an antenna for FM radio reception.
boost volume on s740
to make everything louder on the phone go to settings profiles edit and put the system volume to loud
if you do it then the system sounds are too loud. go to settings sounds and set the last 5 to none
I don't know if whoever wrote the bluetooth stack for Android has Super Hearing or what.... With wired headphones, I have to turn down the volume or I'll blow out my hearing... But with Bluetooth, it's like a fscking whisper.
I have tried the voodoo sound, but apparently it only boosts wired headphones - absolutely not what I need! I listen to music over my stereo Bluetooth headset, or at least I try to. I usually give up in frustration.
Is there any hack/mod for the Vibrant that will allow an increase in BLUETOOTH volume?
Thanks!
Total opposite for me. My wired headphones sound terrible and tinny with no bass at all. Bluetooth on the other hand sounds fantastic. What type of Bluetooth headphones are you using?
CrazyCharlie said:
Total opposite for me. My wired headphones sound terrible and tinny with no bass at all. Bluetooth on the other hand sounds fantastic. What type of Bluetooth headphones are you using?
Click to expand...
Click to collapse
Plantronics Voyager 855.
bump. I have a helmet with stereo bluetooth built in, I use it to listen to music and/or gps while riding the motorcycle. And I can't hear a thing once I get moving on the bike. On CM7 and Miui they have DSP manager and on my G1 there was the louder volume hack app.. but i can't find anything for 2.2 roms for the vibrant. I'd really like the ability. I tried adjusting the numbers under bluetooth in the volume section with the secret codes but had no success.
hi there, i have the same issue... i bought a motorola s10-hd and they sound good but very quiet...
On Bluetooth: I turn phone volume all the up then control volume via Bluetooth.
On Wire: REMIND MYSELF to turn down phone volume before wearing earphone. Sometimes I forget and OUCH my ears!!!
Anyone have a better method, please share.
Vibrant on Project-V + Bali-X 1.1
Volume boost?
I have a Samsung Captivate that runs on Firefly 3.0 froyo rom. The problem is that the audio of music and most importantly videos are not loud enough. Voodoo control plus does a great job of increasing the volume for wired headset. But I use bluetooth headset to listen to music and watch movies. I can hardly hear the audio in noisy environments.
Can someone suggest some app or fix or mod to increase volume in bluetooth headset?
I came to know that volume+ app for gingerbread does this job. Any similar app for froyo? or Voodoo control plus can actually help with BT headset volume boost?
Is anyone else experiencing volume control issues when listening to music on a bluetooth headset. I'm using a Motorola Finiti bluetooth and I have both the volume on the device as well as the earpiece set to the lowest setting and it is still freaking loud. I can't seem to find a means of controlling the music volume because when I take a call I need to actually raise the volume to hear the caller. Any help or ideas???
Ok, quick update. Messing around with the volume on the phone does nothing. The volume cannot be controlled by the phone. It is either on or off from the phone itself and my bluetooth volume on my headset is as low as it can go. Any ideas guys????
I got the Optimus V at the recent Cyber Monday deal at Virgin Mobile - for one major purpose - to use it as an mp3 player for my car. I have not activated the phone, do not plan to, have wifi on it only.
The built-in speaker on it is pretty loud, so I am surprised that the headphone volume is very low. I have to turn my car volume all the way up to max to hear anything (driving highway).
I wonder if LG turned the volume low to prevent people from killing their ear-drums. Is there any solution out there without having to activate the phone and install alternate rom on it? I have turned the volume in settings all the way high, and I have Pandora, and I have set the audio setting to high on Pandora preferences.
Pls. let me know if my objective cannot be achieved without rooting and installing a custom ROM, I would prefer not to activate this phone.
Thanks for any help.
Shameless bump...I have Volume Control+ which does not help at all.
you hear low sound in headphone ?
what are you connecting it to?
Yes, I have a low volume on the headphone too. I connect it to the aux port on the car radio using a regular Stereo Jack. My Car radio is a Pioneer system, which has great sound with other mp3 players.