Hey all.
I currently use windows mobile 6.1 on the device and it works great, but I am giving it to a friend that wants to use the original software it came with (WM2003)
How can I go about restoring it, and also is it possible to keep it unlocked so any sim can be used in it like now?
flashing is flashing you go back to wm2003 by flashing a wm2003 rom on it just
like to did to go to wm6.1
and going back to an ealier rom will not sim lock the phone
Okay I found what I thought to be a wm2003 rom but it dosen't seem to want to work.
It flashes okay but when it turns on at the o2 logo it says NO GSM and of course I don't get a signal.
Is there anyway of getting hold of a wm2003 rom that does work?
Unlock code
Unlock code for xda 2 02 smartphone windows mobile fccdd,nm8himalaya ph 10b please help
Unlock code
Network is locked please help with unlock code for xda 2 02 smartphone windows mobile fccdd,nm8himalaya serial number or unlocking software with the drivers
help..
some newer radiostacks only works with newer roms get an older radiostack
Related
I've just received an XDA2 that is locked to the O2 network.
I need to use a UK Vodaphone PAYG Sim in the XDA.
I've run xda2unlock but it tells me that the phone is allready unlocked.
Except, when I use my Voda sim the XDA still wants me to input a code into the SIMlock box!
Any ideas as to what the problem could be?
what do you mean ?
when you softreset your device and it want a code to do anything but
call alarm and such ?
because thats not a simlock code thats just the sim code
You probably followed the xda2unlock link from the front page of www.xda-developers.com into the wiki pages. In the wiki there is still the old version 1.2 of the tool, which doesn't seem to work on Radio 1.10 or so. At least on my UK O2 XDA2 I had the same behaviour as you described.
The good news is: there is a new version that does indeed work (at least, for me it did). Please go to http://forum.xda-developers.com/viewtopic.php?t=6963 where you will find version 2.2 of the xda2unlock tool. This is a program that runs on the PDA itself. It does not require the hard reset or the bootloader mode.
Hope this helps ... Kai
PS: I have updated the 2 wiki pages, to include links to version 2.2, too.
Japanese ROM from DoCoMo hTc Z has been uploaded to XDA-Developers FTP and added to the Hermes wiki, you can find it under the Available Original Shipped ROM Versions.
Notes on this ROM:
ROM Version: 1.23.731.2 06/24/06
Radio Version: 1.06.00.10
Bootloader: 1.04
Language: JPN (Japanese)
CID: DOCOM801
As you can see this is nothing new, but I guess it will be useful for people with this CID to be able to downgrade to bootloader 1.04.
Enjoy
Hi pof,
Thanks for that. I tried this to flash my X01HT after unlocking it with imei-check but with no luck. RUU went successufully till the last screen and I hit the upgrade but it returned an error saying something like this RUU cannot be used for the device. Bootloader is now 1.04 and the device should be SuperCID with imei-check. The only thing I can think of is that I upgraded the radio to your 1.2. Would that screw SuperCID? I appreciate your advice in advance.
Thanks,
harryk
harryk1372: If you are in 1.04 bootloader just run the upgrade utility again without disconnecting the device or start the upgrade in bootloader mode to bypass CID checking.
If it is really SuperCID then you shouldn't have seen this error.
Hi pof,
Thanks very much for getting back to me so quickly.
I ran the upgrade in the bootloader mode. I thought that I don't have to run it twice if the device is already at the SuperCID state and didn't run the update twice. I'll try it again when the device is fully charged as the battery is now down to like 30%.
I'll post the result again when I am done. Thanks again for your prompt advice. You're the man and I really appreciate your efforts taking us thus far in cracking Hermes.
Regards,
harryk
Hi pof,
The device looks like it was not in the SuperCID state and RUU went fine with the second run with no error. However, the upgrade failed when it hit exactly 47% no matter how many times I tried it. Lucky that I did not brick my device but of course it seemed to lack some of the components and it did not even have the Connections setting to set up the Internet access. Also, AutoRun and cabs in the ExtRom didn't take any effect either although the cab files were there.
I decided to flash the TyTN ROM instead and that was successful. That is fine as I only use Japanese occasionally and I didn't really want the Japanese MUI so I will keep it as is. Perhaps I will tweak it a little to be able to use Japanese with loading the Chinese nls, Japanese font, Japanese IME and so forth just like I did with my Universal.
Thanks again.
harryk
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
fyi...
http://forum.xda-developers.com/showthread.php?t=283177&page=2&highlight=qtotter
I always downgrade my JASJAM using I-Mate shipped ROM
s2k7 said:
Does anyone succeed in flushing Docomo ROM to X01HT?
After unlocking my X01HT,
the annoying message http://forum.xda-developers.com/showthread.php?t=282073&p=1048193
appears again and again, even if I use SB_USIM.
Especially when I write SMS message, it will disturb me over and over.
I try to flush the Docomo ROM to my X01HT and hope to receive your help.
Click to expand...
Click to collapse
i use the docomo rom on my x01ht. it's ok. i have no problem with it at all.
a friend of mine uses a sim-unlocked x01ht (/w the original s/b rom) with sb_usim, but she does not get such a msg at all. do you use a s/b sim?? if yes, i suppsoe you did something wrong...
X01HT Unlocking Problem
I've got this X01HT a few days ago from S/B shop but when I tried unlocking it the result was no good using my cable. I read from other site that X01HT released from December 2006 cannot be unlocked. Please give me some clarifications on this and also, is FLASHING on lower rom version even in english version can resolve the problem...? Your response will so much appreciated.
Thanks in advance.
At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
To the experts, I need some advice. I intend to get a X01HT, already unlocked and flashed with the dopod 838 pro firmware. However, I intend to flash back the Japanese shipped rom :
RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip
What are the requirements esp where :
Bootloader (SPL)
Latest Radio Bootloader (HTC_BOOT)
Or since its unlocked, do I just go to the bootloader mode and flash direct? Any side effects if I do so, since its changing from an english rom of another clone (Dopod 838 pro, WM6)?
I am not even sure if the RUU_HER_DoCoMo_1.23.731.2_1.06.00.10_JPN_SHIP.zip rom is WM5/6. Please advice, thanks..
Hi
I was given an Orange SPV M600 running WM5.0 I foolishly thought I would be able to unlock it to work with my T-Mobile sim (the only network I can get coverage at home) I ran an unlock tool from en.pdamobiz.com
http://files.pdamobiz.com/c/PDAMobiz.com_ProphetAKU2_unlockCID.rar
I managed to get to through to the completion of the Downgrade.bat process. I was then asked to sofdt boot the M600 but it now cannot be found by Activesync. I was unable to successfully run Unlockcid.bat and now it just boots to either the 'Orange' screen (displaying IPL 2.10.0001, SPL 2.10.0001, GSM 02.07.20 & OS 1.0.13.21 - the new OS I believe) or the 3 colour screen (displaying IPL 2.10.0001, SPL 2.10.0001) if I hold down the camera button.
Windows 5.0 has gone or is unreachable but I am assuming it can't be completely dead as I get a noise when connecting/disconnecting the USB lead....
Is this false hope? Have i killed it after 2 days of ownership??? Should I have attempted this process with very little tech knowledge - me thinks YES!
I would be eternally greatful to anyone who can help me out of this black hole..... I just need pointing in the direection of what stage the M600 is at and how to get it running on my T-Mobile sim.....
Thanks in advance
hi there, try going into the bootloader screen, when you connect the usb cable it should show on the bottom off your screen. then try uploading the orange rom you can find on the wiki page. if this works then try using the loki unlocker which you should also be able to find on the wiki page. i used the loki tool and it unlocked first time. hope this helps. let me know how you go.
The GOOD news is No you haven't killed it. It seems you have wiped the operating system from it. I would sugest searching for RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe down load it and then get your phone to the multi colour screen before running the download. This should then update your phone
when I tried to unlock my phone, I couldn't get it to unloack at all till I put a orange pay as you go sim in the phone and registered the sim with orange then it unlocked first time.
Killed prophet reborn!!
Fingers666 said:
hi there, try going into the bootloader screen, when you connect the usb cable it should show on the bottom off your screen. then try uploading the orange rom you can find on the wiki page. if this works then try using the loki unlocker which you should also be able to find on the wiki page. i used the loki tool and it unlocked first time. hope this helps. let me know how you go.
Click to expand...
Click to collapse
Spot on. Thanks so much for the advice. Fingers666 & jazpa !! I'm back on track. M6000 is now communicating again. WM5 is resident. Just need to unlock the sim and I'm away. [email protected] tried loki 3.0 amd 3.0a with both Activesync 4.2 and 4.5 respectively without any luck so I've just spent £5 a http://www.unlocking.org.uk/ as they say they can unlock a G4 ver. We shall see!! Great help though and THANKS again to both of you
Please Help Meee!!
Hello i was wondering if anybody could help me.
I want to unlock my orange SPV M600 for free.
If there are any safe and free websites that anybody knows of could u please tell me.
Thank Youu!!
James Thomas
Download Lokiwz, it is quite easy to locate. Inside the folder you will find 1 or 2 cab files, copy these to your storage card and run them on your M600. Now run Lokiwiz from your PC, after around 12 minutes, it will display your sim unlock code. Switch off your M600 and insert the sim you want to use, at the prompt, enter your code lokiwiz generated. For around 2 minutes the phone will seem to have no signal, then it will connect.
Worked first time for me, my M600 was locked to Orange, now it works great with O2.
wonderful works great with G4
thanks
mike
After i did a hardspl and installed wm6.1 my green edition my prophet is simlocked.I used the prophet tools and did the unlock and it gave me some password.But when i press the password it keeps sending me to the pin screen and it always ask me the unlock code.It says unkown sim status or something.What should i do?
When i did the sim unlock staff i had my one and only sim i use.
SHould i try to turn it on with a different sim card?Will it work?
Cause if i need to have the original sim card which was an orange sim card then i am screwed
Do you have an Orange branded Prophet? I think the ROM you are using is based on Cloudyfas latest ROM which puts the SIM lock back on on Orange branded Prophets! I had the same issue and so are no longer using that particular ROM...
So i have to use another rom?Can you recommend me another rom?
I need either a wm6.1 or a wm6 with greek characters.
i would prefer to keep the wm6.1 without the greek but can we do something to sim unlock it?
well use lokiwiz 3 it just provides you the code...do a search on lokiwiz 3 on the forum....keep win mobile 6 and unlock it through code..it's simple...any other question reply this...work safe
It doesn't persist though.
ROMs based on Cloudyfas latest ROMs have SIM Lock issues on Orange branded Prophets.
then the ultimate solution is get it unlocked at a unlocking point...you pay but at least you know you don't do stupid things...or do ass l3v5y says and change the rom....work safe
The issue is with the ROM, and not with the unlocking procedure.
Hi. I have a G4 (ipl 2.25.0001, spl 2.25.0001) Wizard 8125. I tried to flash to a wm6.5 rom and i know i did something wrong. Everytime i try flashing a new rom it goes all the way to 100 percent and then once it reboots it just goes back to the bootloader screen and stays there. I had activesync off just like the threads say to do and still nothing. Its SIM unlocked since im using an ATT sim card instead of cingular (now att). I would either like the original rom back on this or atleast a wm6 rom somehow. I do have a radio rom upgrade too. Any help would be appreciated.
CID unlocked?
What rom are you using?
I don't think that changing your sim from Cingular to AT&T needed an unlock.
You may need to look at this:
forum.xda-developers.com/attachment.php?attachmentid=52404&d=1190997171
Its a direct link to mUn's RUU. this worked for my CID locked phone.
Also, take a look at this page and go down to "G4 Only" it should answer many of your questions.
wiki.xda-developers.com/index.php?pagename=Wizard%20Windows%20Mobile%206%20for%20newbies
i was trying to use a WM6.5.3. My phone wasnt bricked! I found the original cingular 8125 rom and fixed my phone. I did however after i fixed the rom issue i did CID unlock my phone with no problems. Also SIM unlocked it too to be safe. Yes you were right it didnt need a unlock to use an AT&T SIM on it either. But now im trying to get the original rom back on. I use the Iphone Killer WM6.5.3 Rom on this site and now i cant downgrade back to my original. The reason i want to downgrade is that the phone is severly slow with wm6.5.3 on it. Id rather just go to wm6 or wm5 again and stick with that.
double check
Are you getting the 3 clor screen?
Just plug the device into your computer and run mUn's RUU. It should update even though active sync doesn't show it as connected.
If you can't get mUn's RUU to work, plug the phone into your computer and load the wizard love rom or any 'CID safe' ROM. These ROMs are reccomended before running mUn's RUU.