I have confirmed that I have New Gene. So, how should I use the Orefkov Unlocker for updating the SPL?
I read this guide but it first requires to brick the device before being able to use the Orefkov Unlocker.
So, How to use Orefkov Unlocker without bricking?
Thanks
lamborg said:
I have confirmed that I have New Gene. So, how should I use the Orefkov Unlocker for updating the SPL?
I read this guide but it first requires to brick the device before being able to use the Orefkov Unlocker.
So, How to use Orefkov Unlocker without bricking?
Thanks
Click to expand...
Click to collapse
Not possible in simple terms.
You have to follow krazy's method, step by step. And you CAN NOT skip any step.
lamborg said:
I have confirmed that I have New Gene. So, how should I use the Orefkov Unlocker for updating the SPL?
I read this guide but it first requires to brick the device before being able to use the Orefkov Unlocker.
So, How to use Orefkov Unlocker without bricking?
Thanks
Click to expand...
Click to collapse
Don't use it....., ROM UPGRADING IS NOT WITHOUT RISK.
Is more easy when you have an old gene.
ramersonw said:
Is more easy when you have an old gene.
Click to expand...
Click to collapse
But easiest if you are satisfied with whatever crap that came preloaded
Related
everyone read edit 3 of my post here
http://forum.xda-developers.com/showthread.php?t=294012
walshie, ye old' spammer
dutty said:
walshie, ye old' spammer
Click to expand...
Click to collapse
ye old' spammer?? what are you talking about... im just letting all the users know of my success....
edit.. if i wanted to spam you i would have copied and pasted the procedure into here too
So if i wanted to downgrade my radio, not touch the rom and extro (meaning not wanting to do a hard reset) to 1.27 i can use mtty?
fone_fanatic said:
So if i wanted to downgrade my radio, not touch the rom and extro (meaning not wanting to do a hard reset) to 1.27 i can use mtty?
Click to expand...
Click to collapse
no you cannot use mtty to downgrade your radio rom... read my first post here... http://forum.xda-developers.com/showthread.php?t=294012
walshieau said:
no you cannot use mtty to downgrade your radio rom... read my first post here... http://forum.xda-developers.com/showthread.php?t=294012
Click to expand...
Click to collapse
I read that, so i'll ask my original quetion.
If i wanted to downgrade my radio do i have to reflash the entire package (rom extrom and radio) following the steps in edit 3?
fone_fanatic said:
I read that, so i'll ask my original quetion.
If i wanted to downgrade my radio do i have to reflash the entire package (rom extrom and radio) following the steps in edit 3?
Click to expand...
Click to collapse
no you dont have to reflash the entire package... in edit 3 if you follow the steps you remove the extrom and os from the nbh file wihen you run the nbhextract program... but these can be left in if you want...
I think you must cange your guide becouse first of the edit3 you write:
4.Just to clarify... once you have flashed radio bootloader 108 onto your device it is impossible to do Extracted Radio only upgrades at this time... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index...actedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index..._BootloaderMFG
Click to expand...
Click to collapse
... so it is impossible to use Extracted Radio only upgrades but its possible do it whit edit 3.
yeah i could do that... or you could read the whole post and realise that it was a work in progress as stated and to read all points to avoid you bricking your device...
Ok this is an e-mail I got and I answered it, but I thought..lets post it for people that are interesed in upgrading there phone, but dont know what or how to do.
*Yes I know Wiki exist!
mccreath said:
Hi Mate,
Hope you don't mind the PM, but I just got my MDA Vario II replaced under warranty and have to start all over again with the customization.
I saw you had the same device and a great setup, and wondered if you could tell me the quickest/ best way to get WM6 and the ROM/Radio on mine please?
Any help would be great, thanks,
Andy
Click to expand...
Click to collapse
Hi!..
If you dont know some things, read WIKI, it helps (most of the time to get an answer)
First you upgrade your SPL
dcoelho said:
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. This way you prevent to brick your PDA again.
Click to expand...
Click to collapse
I dont got my warranty anymore because I made my phone simlock-free. *if you do this, READ that topic carefully!! *I just did it because I thought it was fun to mess arround with my phone..*and to tell you the truth..it was!
After that, you do this:
Ok..this is what I did, I installed this version of WM6 (for you notice; doing this is on your own risk.)
Then I upgraded my Radio to 1.41.00.10 (if you wanna know what that is, go Wiki)
Here you can find some great programs.
owyeah..here you can find the latest version of windows Live Messenger!
Hope you will learn something of all of this
cheers!
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. Thsi way you prevent to brick your PDA again.
dcoelho said:
And ... don't forget to flash Olipro Hasd SPL 1.40 before flash roms and radio files. Thsi way you prevent to brick your PDA again.
Click to expand...
Click to collapse
True Thq..I'd forget to note that
Hi @ll..
i have an XDA neo, and would like to upgrade to PDAVIET 4.0.0.6 touch.. but i think, i have to unlock the CID first??
At first i would save the actually rom first (is a G4 Model, WM5) with the "rd2sd all" command, but it would not work
Theres an error, who says that i don´t have the permission to get the rom..
so i think it´s CID Locked..
But i found this--> click here
would this eventually work to unlock CID??
thanxx 2 @ll
you dont need to cid unlock!
next ... free cid unlock work only with prophet g3 versions ... if you have g4 ... no way to unlock without payment!!!
please read wiki for ... what is G3 or G4 and how to flash wm6 without cid unlock!!
the roms have firmware uploader they work with cid locked device
You just need to use NO VENDOR ID locked ROM's. If it got NVID in it's name then you can safely use it. No problem at all.
OK.. thanxx..
bytheway.. what about the PDA Viet 4.0.0.6 touch??
can i use it without CID unlocked??
what happens, if i try to flash a rom, that need to be CID unlocked?
And how can i save my rom now?? because if something "**** happens", i can back it up..
but i don´t get the rom of XDA neo WM5 with
ipl 2.15.0001
spl 2.15.0001
gsm 02.19.21
os 2.15.4.29
or can i get it from here?? someone have this rom?
I also have a XDA Neo and after you flash 4.0000000.6 and so on you can still flash the official o2 ROM from de.o2.com without any problem. Just follow the PDAViet steps and you´ll be safe.
WOW COOL
thanxx...
i will try it at weekend ;-)
thanxx
NetrunnerAT said:
the roms have firmware uploader they work with cid locked device
Click to expand...
Click to collapse
But he (just like me) was looking for a way to backup his current rom, which was not possible because of a security message.
but i thinks this not a problem.. NOW..
because i know now, that is can flash is back with the originial firmware from o2.. thanxx
StevenK said:
But he (just like me) was looking for a way to backup his current rom, which was not possible because of a security message.
Click to expand...
Click to collapse
www.imei-check.co.uk if you have a G4
only g3 is free to unlock in the moment!
NiteSpeed said:
You just need to use NO VENDOR ID locked ROM's. If it got NVID in it's name then you can safely use it. No problem at all.
Click to expand...
Click to collapse
So if I upgrade to PDAVIET's 4.0.0.6 and I want to downgrade again, I follow the steps outlined in the wiki page under "WM6>WM5"
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
If I cant find the original rom that my phone comes with (2.15.13.27 WWE), can I use this one from the wiki??
Location RUU_Prophet_220734_2207114_024721_?QtekWWE_Ship) http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
the above rom does not say NVID. Would installing this EXE package screw up my phone if it is NOT CID unlocked??
TIA
Made NBF & flash any rom to Prophet.
http://rapidshare.com/files/72360239/jumpspl.rar
Prislav said:
Made NBF & flash any rom to Prophet.
http://rapidshare.com/files/72360239/jumpspl.rar
Click to expand...
Click to collapse
please give more info and some instructions
unzip G3 or G4 files into device root. Run SPL.lnk & press camera button. Whitescreen - bootloader. Flash your favorite rom )))
progressbar on device not show, whitescreen it's norm
PS: no more step 1, no more pdocwrite.exe.
Prislav said:
Made NBF & flash any rom to Prophet.
http://rapidshare.com/files/72360239/jumpspl.rar
Click to expand...
Click to collapse
Do you mean we can flash the prophet without using NVID ROM (STEP 1 for upgrading ) ??
SO we can directly flash Our prophet to WM6 without first step ?
Please advise
Thanks
YES!!! It's patched SPL 2.20
Very good!
Anyone tried this?
I'll save up some time if it works.
but we'll lost our original bootloader.. don't we?
no, it's soft not hard spl
I used this method last week to flash a Wizard and I must say that is quite easy and indeed you do not have to flash back to WM5 before upgrading.
See also: http://forum.xda-developers.com/showthread.php?t=329147
I have IPL/SPL 3.08 is it possible to downgrade forever to 2.20 without the risk of bricking the device?
This SSPL use jumpspl - http://forum.xda-developers.com/showthread.php?t=334667&highlight=jumpspl
Prislav said:
This SSPL use jumpspl.
Click to expand...
Click to collapse
thanx, but i dont want to loose/change my spl from 2.15.0001
can u patch spl 2.15.0001 for the same job?
So it flashes our prophet, and changes the spl... OKay
Is it possible to go back just in case??
I guess then i will have to flash doing the normal procedure right? I didn't understand what was that thing about spl.ink and cammera button, did you mean to do it to get bootloader? sorry 4too many questions
this is the biggest revolution since wm6 THANKS DUDE!
Prislav said:
This SSPL use jumpspl - http://forum.xda-developers.com/showthread.php?t=334667&highlight=jumpspl
Click to expand...
Click to collapse
im sorry but is this the answer to my question in particular?
Hello all
This is Soft SPL, then u use it, they not writes to DOC.
JumpSPL just copy spl.nb into RAM and switch to entry point in RAM of this SPL. U don't overrite your curent SPL. This gives your abillity for flashing free without CID checks.
pls help
Hy ewerybody could someboy help me? I have a g4 cid lock xda neo, the original rom was with 2.15 spl and i updated with an other one to 2.20 an i cant back my orignal rom, with this aplikation can i back the original rom and my original bootloader without changing the spl?
Works
I was try the tool and works in my lock G4.
only two questions, please.
have you plans to make a harspl?
and, what's version of spl? is 2.20?
Thanks a lot.
Sorry for my bad english
spl
thanx an answer, i want jut my old o2 bootloader back, i'm friendly with spl 2.20
(i need the bootloader because i have to bring my xda neo back to the service)
so will work this?
krobi227 said:
thanx an answer, i want jut my old o2 bootloader back, i'm friendly with spl 2.20
(i need the bootloader because i have to bring my xda neo back to the service)
so will work this?
Click to expand...
Click to collapse
but i think it doesn't help.. They are going to charge you anyway..But a try is worthfull..
I want to use Artemis fully and note that it requires spl 3.03 which comes with stock rom 3.14.
Problem is that that has not been released for my phone (T-Mob UK).
I can use HSPL to load 3.14 and then remove HSPL - but I got back to SPL 1.66 and not 3.03.
Does anyone have any suggestions?
Thanks
Tony
goldcard goldcard or goldcard.
samsamuel said:
goldcard goldcard or goldcard.
Click to expand...
Click to collapse
I know I am walking right into some abuse ;-) but I have to ask where there are instructions for doing "goldcard". so far I have only flashed with HSPL, SPL, CustomRUU etc
Thanks
http://forum.xda-developers.com/showthread.php?t=825397
<insert derogatory and/or sarcastic remarks regarding searching and google etc. of your choice here>
The instructions for installing are within the discussion on Artemis ROM, I followed the exact same method today, now have SPL 3.03 and fully functioning Artemis. All I will say is read, read and read before doing any of it, once it makes sense in your head it actually isn't that difficult
mb76 said:
The instructions for installing are within the discussion on Artemis ROM, I followed the exact same method today, now have SPL 3.03 and fully functioning Artemis. All I will say is read, read and read before doing any of it, once it makes sense in your head it actually isn't that difficult
Click to expand...
Click to collapse
I believe I did everything required in Artemis. My problem I believe is that there is no "official" 3.14 rom for my phone (T-Mobile UK) hence why I can't get Spl 3.03 on there.
I may ask some kind person to generate me a gold image for my phone...
But if you know how to get 3.14 on with spl 3.03 that would be great.
Thanks
Tony
TonyOCL said:
I believe I did everything required in Artemis. My problem I believe is that there is no "official" 3.14 rom for my phone (T-Mobile UK) hence why I can't get Spl 3.03 on there.
I may ask some kind person to generate me a gold image for my phone...
But if you know how to get 3.14 on with spl 3.03 that would be great.
Thanks
Tony
Click to expand...
Click to collapse
This info can/will help you.
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
kurt-willems said:
This info can/will help you.
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
Click to expand...
Click to collapse
I followed the process and indeed have a
9E000000400000000000020002000000
SD card,
But the zip file in the link is corrupt :-(
Could someone generate a new image file for me
pretty please ;-)
Thanks in advance
Tony
TonyOCL said:
I followed the process and indeed have a
9E000000400000000000020002000000
SD card,
But the zip file in the link is corrupt :-(
Could someone generate a new image file for me
pretty please ;-)
Thanks in advance
Tony
Click to expand...
Click to collapse
Like mentioned at the post I send you lastly; there you can see/reed that you can contact oliverweidel if you need some new image file.