Related
Does anyone know if one can use any 2.5mm earplug handsfree with the XDA Mini S? The one supplied is difficult to carry lots of wires, would like to have a monaural one. Has anyone tried any? Kindly let me know. Thanks.
I have been looking for the same earphone since i bought the item on JAN06, till now I still cant find a compatible one.
That will be helpful if anyone know which is the best headphone with microphone.Not the Bluetooth one!
Thanks!
ebay Adapter eventually works
Hi there,
I was also looking for a good headset fromt he beginning on, the issue might be solved if I can install the A2DP software (will try later), but a nice wired headset would still be nice.
My favorite would be the ones SonyEricsson is shipping with the music phones.
I actually tested a 2.5mm adapter with cord and speakerpice (with clip) plus adapter for 3,5mm, which would be perfect. One was for Nokia, one for Motorola - both are NOT compatible with the HTCs!
Lately I saw a shop selling the same adapter specifically for HTC devices, so the problem might be solved.
Also I saw 2 wired 2,5mm stereo headsets from Jabra on the US website, they are for sale there but NOT in Europe. If these would work, they would for sure be of very good quality.
Anyone tested these?
Found one
I found one listed on Ebay under HTC Wizard. Its item number 9716253639, seller's name is 5starcommunication. Looks quite cool and they will mail it world wide. Will take sometime before it reaches India. But if anyone in the US orders and tries do let us know. Thanks.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=9716253639&rd=1&sspagename=STRK:MEWA:IT&rd=1
I bought a 2.5mm to 3.5mm adapter from Expansys UK and it works just fine. Sorry - no part number on me, but it should be easy to find on their web site.
Hope this helps
bloney said:
I bought a 2.5mm to 3.5mm adapter from Expansys UK and it works just fine. Sorry - no part number on me, but it should be easy to find on their web site.
Hope this helps
Click to expand...
Click to collapse
Are you able to work with the MIC?
waiho said:
bloney said:
I bought a 2.5mm to 3.5mm adapter from Expansys UK and it works just fine. Sorry - no part number on me, but it should be easy to find on their web site.
Hope this helps
Click to expand...
Click to collapse
Are you able to work with the MIC?
Click to expand...
Click to collapse
I use it for headphones only (senheiser PX200 which sound great with the Wizard!), so not sure if they have mic connected or not. Sorry.
Get the adapter at radioshack.. there r tons n tons of them for $3.. i got one n it works like charm..
with/out mic
I wonder if the ones from Radioshack have a mic in the wire?
I have an adapter 2,5 to 3,5mm with GREAT sound quality, however without microphone in the adapter, thus I always need to unplug the adapter and take off the headphones to answer a call - sucks!
As mentioned so far i Only saw one adapter on ebay WITH a microphone in the adapter piece (and clip on the back) - but do not know how it performs...
http://cgi.ebay.de/XDA-Mini-MDA-Com...06652399QQcategoryZ123195QQrdZ1QQcmdZViewItem
You could also try this one ...
Handsfree and Headphone Adapter
Still no earpiece...
Sigh... still no proper in ear headset (monaural) in sight... :?
2.5 mm to 3.5 mm adapters at Radio Shack
Beware of the Radio Shack adapters. They stick out and are easy to catch on a doorway as you walk through it. I did so a few weeks ago and the headphone jack no longer worked. The adapter male end bent back and damaged the phone female socket. The result was very quiet sound from the headphone jack, totally unusable for phone or music.
I sent the phone back to T-Mobile and they very kindly sent me a replacement. I bought a new Radio Shack 2.5mm male to 3.5 mm female adapter and the same day proceeded to catch it on another doorway, bending back the male plug, and damaging the phone female headphone jack. No sound again from the headphone jack. I will stay away from the headphone adapters from now on.
Phone speaker not working after using headphones - No sound
I had a similar problem (not the same). After using a 2.5 to 3.5 mm adapter my phone speakers and the mic didn't work anymore. I was about to send the device in, when I read about a solution (I think it was in XDA-Dev somewhere).
You'll have to gently move the headphone jack forward and back, twisting it a litte or even better use some compressed air blowing into the jack. It works best, if you to take out the battery and blow from the back.
My speakers work again, but the same thing happens now and then. It seems there is some switch inside the headphone/mic jack, which doesn't go back. That only happens when I use the adapter.
I realize that this is an old thread, but here is an idea for you. As far as I know, pretty much any 2.5mm headset should work. I don't use it for my phone personally, but I recently purchased a Plantronics Gamecon X20 headset for my Xbox 360 after my old one broke. Since it has a plain 2.5mm jack on the end, I thought I would plug it into my phone to see how well it worked. The answer, pretty well apparently. My wife said that it was really clear and, likewise, she sounded really clear on my end. It's going to be a little larger than the ones that have the mic hanging down inline with the wire, but on the other hand, since it's a boom mic the sound quality should be superior with less noise. I haven't tried it for listening to music so I can't vouch for the quality there, but since you are wanting a monaural headset I rather doubt that is relevant anyways. The headset was only $20 at GameStop and they had a used one for $10.
two-zero said:
I had a similar problem (not the same). After using a 2.5 to 3.5 mm adapter my phone speakers and the mic didn't work anymore. I was about to send the device in, when I read about a solution (I think it was in XDA-Dev somewhere).
You'll have to gently move the headphone jack forward and back, twisting it a litte or even better use some compressed air blowing into the jack. It works best, if you to take out the battery and blow from the back.
My speakers work again, but the same thing happens now and then. It seems there is some switch inside the headphone/mic jack, which doesn't go back. That only happens when I use the adapter.
Click to expand...
Click to collapse
In your case, I would say that sounds like a bad adapter. I routinely use one in mine and don't have that problem. It's one of those nasty stick adapters though, so you have to be careful with them. I've seen some cable type adapters for not too much so you might look into one of those instead.
Found info which might help
HERE IS AN/THE ANSWER.
My WIZA200 and Sony P900 phone the mic headsets are compatable, even the answer button works. If you cant find what your looking for under the flavour WIZa or HTC etc... just look for what you need as a P900 type and you will be sorted.
I just checked the pinouts and this answers the very much asked question... what are the pinouts.... here they are....
http://pinouts.ru/CellularPhones-P-W/sonyericssson_headset_pinout.shtml
FOR WIZA AND SONY P900 >>>> 2.5mm 4 pole jack: PIN1 LEFT+, PIN2 RIGHT+, PIN3 MIC+, SHIELD(PIN4) GROUND. I just checked with multimeter and to get call answer pin3 mic and shield must short to signal the press of the answer button.
---
Just for reference Nokia 2.5mm 4pole jack is very odd... this is how they do it.
http://pinouts.ru/CellularPhones-Nokia/nokia_headset_pinout.shtml
on 4pole 2.5mm: 1=speaker+(positive) ### 2=mic+ ### 3=speaker -(negative) ### pin4 = mic - ###short mic+ and mic - to answer call
on 3pole 2.5mm: 1=speaker+(positive) 2=mic+ 3=shield(ground-negative) ### to answer call short speaker and shield.
See how they change their minds... first on 4 pole jacks answer call was on mic side short, then it goes on 3 pole jacks to short the speaker and ground to answer call... can these guys not make up their minds. Grrrr... totally baffling logic in this design, escept they can keep you buying specialised gear for each phone
Glad to see Sony and HTC used a more logical system and seem to stick to it. I suspect the HTC Touch HD 3.5mm is wired the same as the Wiza 2.5mm system just 3.5mm jack not 2.5mm jack.
Someone should make a 2.5mm 4pole to 3.5mm 4 pole converter to use old cherised headsets on the HTC Touch HD... know of any, anyone?
kull said:
Sigh... still no proper in ear headset (monaural) in sight... :?
Click to expand...
Click to collapse
Another solution.....
I know this might sound odd but a simple solution is get your stereo headset & mic thing and cut the right earpiece lead off...
Now you may have to strip the wire a bit and wrap a piece of insulating tape to stop the wires inside touching, which will cause problems (crackling or loss of audio on remaining speaker most likely). Once the wires are safely insulated away, youll have what you are seeking, a monaural one earpiece mic heaset... saves having to buy one that your finding hard to do.
Seems a shame to sacrifice a stereo headset down to mono, but if thats your poison, go for it.
pinouts.ru is the shiz
Get out the soldering iron and make a frankenstien. I grafted a 3.5 female to my old nokia's pop port so I could hook it to my stereo (before I got a BT adapter) and to my amplified helmet speakers (that were sorced from a computer speaker set.) Before I lost the phone I was planning to add a 2.5 mono female socket for a lil clip-on mic I have. Point being, it's only 3 signals and a ground, should be able to come up with something.
ts worth having a go
Yeah having a go is definately worth it. I just utilised the pinouts.ru stuff and a bit of personal common sense knowledge of the wirings and managed to make myself a 3.5 touch hd 4 pole jack into a 3.5 3 pole jack which works ofr my aircraft. I can now fly and make calls through my pilots headset. It shows it can work. You arent dealing with any dangerous voltages... its all piddly "put it on your tongue and you wont get hurt" voltages... speakers and mics... all easy to work out. Worth having a go.
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Finally I've made a move. TyTN X Sony Crossover Custom Headphones.
I've used a solder to remove the original earbuds wire and soldered a pair of cut SONY MDR-EX71SL headphones on. They sound 100 times better than the stock ones. This will ease my frustrations for now. I was tempted to solder my MDR-EX90LP on but they are $100 a pair. Too much for now
Later on I will try to rework the stock mini USB headphone and make a 2.5mm connector for it so I can use all kinds of headphones(with mic) and connect to a speaker system as I want!
EDIT: It appears that the original mini USB headset has 6 wires, 4 should be for the headphones and the remaining 2 for the mic, I can simply cut up the wire right after the mini USB port and connect the 6 wires to a standard cell phone headset 2.5mm connector then I should be able to connect the TyTN to all kinds of headsets![/img]
Arent you essentially doin this? http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html as seen in another post, seems like the most universal way to solve the problem.
I do like the way you built a set without a plug, cleaner..less cord and weight, but I know myself, I go through a pair of headphones about every 2 months on my mp3 player, Id hate to have to redo the soldering everytime, I expect with the headphones being such an issue for most peple that the market will be flodded in a month or so with headphones for the tytn, or atleast adapters, shoot, the one guy in the above url even offered to do it for free, as long as you bought the plug.
is there still no adaptor available to buy?
i just do this way........
can swap any earpiece....
crash74 said:
i just do this way........
can swap any earpiece....
Click to expand...
Click to collapse
@crash74
Looks very good, even more solid than the other solution, but how do you open the unit to reach the print, is their any trick?!
Can i also use the new connection as a line-out for little active stereo boxes, or is this to tricky for TyTn/boxes?
worked like a dream i have no more crapy hissing inbetween tracks and now i can play my song thu my hi-fi that 1 to the modders and 0 to htc
Adapter usb to 3.5 jack
Go to semsons.com, they have the adapter
qing84, I have the same headphones as u=) firstly I solve this problem like you, but I smash the small "black box"=) with mic and volume control, and i was need connect my mdr-ex71 directly to TyTN without "black box"=(
I was glad that i did it, because sound became much more louder, and more clean...
qing84 said:
Just a bit of whining here...
The TyTN seems fine after a month of use but the headset issue is blowing my mind. I want to listen to the music and talk on the phone with some quality headsets.
First the supplied headset is a non standard USB, you cannot use your own headphones or connect to speaker inputs. Bluetooth stereo headsets are available but I believe that they are still too bulky and the technology is not yet fully developed.
You can't charge the phone while using the headset. This is just dumb, Very dumb.
Needless to say the quality of the supplied headset is not good, it is not even recognized by the phone as headset when you connect it. If you connect it to your phone while the phone is non silent, the phone still rings and not just your headset.
I have no idea why HTC is doing this, the TyTN is a relatively large device and it doesnt make sense that there are no spaces for a 2.5mm plug where you can buy all kidns of aftermarket wired headsets for it. Even the high end headset makers SHURE make headsets with the 2.5mm...
Click to expand...
Click to collapse
umm...you could have just bought this.... http://www.cellphoneshop.net/auadforci85.html
i think its a good idea to replace the head phone leaving the mic in workin condition.as there is no connector is still available at least in my town.i ll try it tomorrow.thanx dude
Anyone have a solution for this? I'd like to be able to play MP3's through my car stereo (via FM transmitter), as well as have it plugged into my car lighter to keep it charged.
I figure I can buy the audio adapter and plug it into a generic FM transmitter. I could also buy a boxwave Versacharger to charge it. But I can't do both at the same time b/c they both use the mini USB.
In any event, this proprietary crap sucks.
The only option I'm aware of:
http://www.mobileplanet.com/p.aspx?i=140425
yes, this is the UNIC option.. because:
a) HTC Proprietary connector: it's VERY DIFFICULT to find this type of mini-usb connector
b) Stereo headphones provided with hermes DOESN't have cables to charge the pda
Expensive option... get a bluetooth headset with 3.5mm input to connect to your FM transmitter ... and say bye bye to wired music.. almost..
sickchilly said:
The only option I'm aware of:
http://www.mobileplanet.com/p.aspx?i=140425
Click to expand...
Click to collapse
Excellent! Exactly what I was looking for....
new2city said:
Expensive option... get a bluetooth headset with 3.5mm input to connect to your FM transmitter ... and say bye bye to wired music.. almost..
Click to expand...
Click to collapse
Heheh... I actually thought of that. I think I'll go with the cheaper option
Here's how I did it:
http://forum.xda-developers.com/showpost.php?p=1078942&postcount=26
Has anyone managed to not only get the sound going through their speakers, but have their stereo mute on incoming call?
I'm not sure this is possible. I imagine your average phone has a pin it sets closed or high or something. The hermes doesn't seem to..
URPREY: Does the adaptor give you one standard mini usb for charging then split the 'special' audio pins to the other standard mini usb? Did you then just adapt a mini usb cable to hook into the line level inputs of your stereo?
icemantwilight said:
URPREY: Does the adaptor give you one standard mini usb for charging then split the 'special' audio pins to the other standard mini usb? Did you then just adapt a mini usb cable to hook into the line level inputs of your stereo?
Click to expand...
Click to collapse
It gives me one mini USB for charging, and a port exactly like that on the hermes for the audio/headset portion. I used a usb to 3.5mm adapter from mobileplanet.com to give me the 3.5mm audio out.
URPREY said:
It gives me one mini USB for charging, and a port exactly like that on the hermes for the audio/headset portion. I used a usb to 3.5mm adapter from mobileplanet.com to give me the 3.5mm audio out.
Click to expand...
Click to collapse
Yep, sorry, didn't see the extra adapter. That's a shame. It makes the very expensive first plug poor value for money.
If they come out with an adapter that turns it into mini USB and 3.5mm I'll go for it.. otherwise..
2 other q's:
1) With the first adapter, can you then use ANY usb car charger (ie does it bridge the NC pin to ground?) or do you then need your car charger to do that
2) What triggers 'headphone' detection? Is it the first adapter, the stereo adapter or is it actually plugging speakers into the stereo adapter?
This information would be extremely helpful, thank you!
icemantwilight said:
1) With the first adapter, can you then use ANY usb car charger (ie does it bridge the NC pin to ground?) or do you then need your car charger to do that
2) What triggers 'headphone' detection? Is it the first adapter, the stereo adapter or is it actually plugging speakers into the stereo adapter?
This information would be extremely helpful, thank you!
Click to expand...
Click to collapse
I can use any car charger, but the other ones I have don't provide enough power to consistently cause the 8525 to recognize the charger (and thus they don't always charge).
I don't know the answer to your second question. I'd be happy to check it out for you tomorrow when it's light outside again
URPREY said:
I can use any car charger, but the other ones I have don't provide enough power to consistently cause the 8525 to recognize the charger (and thus they don't always charge).
I don't know the answer to your second question. I'd be happy to check it out for you tomorrow when it's light outside again
Click to expand...
Click to collapse
Cheers for that. By not consistently recognize you mean it detects it the first time you plug it in then not anymore? If so that sounds like what I've found too.. it's due to the 'spare' pin 4 (or 2 or B depending what diagram you're looking at) not being grounded. The fact it detects it once per reset seems to be a bug.
icemantwilight said:
Cheers for that. By not consistently recognize you mean it detects it the first time you plug it in then not anymore?
Click to expand...
Click to collapse
Correct. The car charger that came with my device holder works perfectly and consistently charges my phone every time I plug it in, so I've always use that one.
URPREY said:
I don't know the answer to your second question. I'd be happy to check it out for you tomorrow when it's light outside again
Click to expand...
Click to collapse
Had a chance to look at this?
icemantwilight said:
Had a chance to look at this?
Click to expand...
Click to collapse
Sorry - yes. With just the audio adapter hooked up, the sound continues to come out of the rear speaker. When I plug in the headphones, the sound switches to the headphones. Hope that helps.
URPREY said:
Sorry - yes. With just the audio adapter hooked up, the sound continues to come out of the rear speaker. When I plug in the headphones, the sound switches to the headphones. Hope that helps.
Click to expand...
Click to collapse
Yep thanks. From this I can work out from the pin outs that have been worked out that the tytn detects headphones (and thus shuts off the back speaker) by testing impedance/capacitance or something on the speaker out cables.
Since there are no official cradles for the tytn I'm looking at knocking up a solution like yours, charge in the car and gps nav through the stereo (was hoping for auto stereo mute on call but that's a pipe dream) and doing it without the 2 expensive adapters and car charger my jasjam didn't have.
I've gathered a bit of info about the usb connection from various sites and forum topics. Maybe I should create a/add to the hermes usb port page in the wiki, if anyone but me is interested..
I hope the tytn Y cable is NEEDED, because there isn't a male "minu usb" jack like the one on the hermes in commerce. Cutting original headphones has no results because you can't charge it.
I have thought to buy tytn y cable, open it, and if there is some space inside, to add a 2.5mm - 3.5mm (depends on the free space) jack
So the Y adapter has 3 outputs: to charge, headset & jack.
If no space is avaiable, i cut my headphones and plug it from y cable to my stereo (also with mic included).
Another thing, to detect ORIGINAL CHARGER must be connected B & A pins, as described in THIS url comments
I agree with wiki page
SkizZO said:
Another thing, to detect ORIGINAL CHARGER must be connected B & A pins, as described in THIS url comments
Click to expand...
Click to collapse
Ah yeah, I'm Iceman, I wrote that
Based mainly on comments in this thread, some other posts and some jiggery pokery with a multimeter and checking pinouts.
icemantwilight said:
Has anyone managed to not only get the sound going through their speakers, but have their stereo mute on incoming call?
Parrot makes a BT car kit that connects into all factory stereos to use the speakers to play the phone or mp3 through the car stereo speakers. Obviously the mic is a separate item, but incoming calls (or listing to mp3s from your BT phone) do mute the car stereo during the call.
several kits work, but I have Parrot CK3000 Evolution Bluetooth, Hands-Free Car Kit which came with specific harnesses for my car make and model. The other one is a bit flashier here:
http://www.abtelectronics.com/scripts/site/site_product.php3?source=froogle&id=24115
Click to expand...
Click to collapse
icemantwilight said:
Since there are no official cradles for the tytn I'm looking at knocking up a solution like yours, charge in the car and gps nav through the stereo (was hoping for auto stereo mute on call but that's a pipe dream) and doing it without the 2 expensive adapters and car charger my jasjam didn't have.
Click to expand...
Click to collapse
Auto stereo mute works fine if you use WMP or even with TCPMP if you uncheck the "play music in background" option
Has any crufted an adapter that allows the use of normal 2.5mm cell-phone headsets to work with a TyTN. I like the fidelity of my awesome Plantronics headset, and I want to get it to work with the TyTN. Any luck?
Thanks,
-Humbert
Have you tried buying one from this site.
http://shop.brando.com.hk/htcstereoconverter.php
I just received mine last week and it works great, MUCH better than the stock headset.
Alan.
Edit: "Sorry mis-read the topic, this is to a std 3.5mm headset jack."
aw000002 said:
Have you tried buying one from this site.
http://shop.brando.com.hk/htcstereoconverter.php
I just received mine last week and it works great, MUCH better than the stock headset.
Alan.
Edit: "Sorry mis-read the topic, this is to a std 3.5mm headset jack."
Click to expand...
Click to collapse
Not a problem, but thanks for the referral and review anyway. I will probably go ahead and order one of those, too, but really, I just want a wired headset.
Thanks,
-Humbert
No... I've been searching high and low. I've got a pair of Shure headphones that are amazing and have the 2.5mm 3-pole connector that works perfectly with my HTC Magician... I'd love an adaptor to just run them with my Tytn, but so far no luck.
Currently, I'm using a 3.5 adaptor and then another adaptor to the ExtUSB connector, so I've got no mic capability and two dodgy connectors between my 100 GBP headphones and my phone!!!
I'm going to take my Shures to an electronics guy and have him swap the connector eventually.
I found the following mini-USB to 2.5mm adapter for the Motorola phones.
http://www.theboom.com/adaptors.html
Anyone know if its compatible with the HTC mini-USB implementation?
kcchen said:
I found the following mini-USB to 2.5mm adapter for the Motorola phones.
http://www.theboom.com/adaptors.html
Anyone know if its compatible with the HTC mini-USB implementation?
Click to expand...
Click to collapse
Nope, it wont work.
this is where our stores get their accy's from, you can get allot of good stuff here.
http://superiorcommunications.com/products/products.aspx
if you have a bussiness/Tax/reseller liscense (mispelled) then you can buy from here.
With the risk of a "me too" post, a 2.5mm converter would be worth money to me. I have yet to find one anywhere and am about to buy an extra headset and start "experimenting" and who know where that will lead. Probably to a new phone.
I emailed HTC America and got this reply...
Hello Michael and thank you for contacting HTC America. Unfortunately we do not make any accessories other than what is included with the device. There are some 3rd party vendors that do offer this accessory however; they are not affiliated with HTC. Please see the following link for one of them:
http://www.cell-phone-accessories.com/emu-headset-adapter.html.
Thanks,
HTC Support
I have one on order. I'll let you know if it works.
Michael
Hope?
Hi Michael --
Please let us know if this does work. This would be a great fall-back adaptor to use if/when my BT headset runs out of juice.
Thanks,
-Humbert
I just finished my request to HTC support. These devices do NOT work. No audio what so ever. I tried regular audio as well as the audio of a call. Nothing-nada. The adapter is stamped as "Motorola" on the back. Apparently the HTC version of the USB plug is not the standard "EMU" version that everyone else is using.
Michael
Ugh, why didn't they just add a standard 3.5mm headphone jack? That would have made everyone's lives a lot easier.
I just bought the Motorola adapter, ended up wasting $5 (not a lot, I know, but hey, it's money).
Maybe I should try for a refund...
If anyone knows any adapters that work with the Hermes/TyTN, I would love to know.
Well, I finally found an option that will work for me. My motorcycle has a 2.5mm plug for hooking a cell phone into the intercom system (it's a gold wing) It also has a 3.5mm plug for an aux device to the stereo. I got the moto hf820 from amazon for around $45. It is a bluetooth hands free device, but it also has a 2.5mm plug on it. So, the phone section of my 8525 now connects to the bluetooth 820 into the intercom through it's 2.5mm plug. For the rest of the audio, I am using one of the extusb to 3.5mm adapters. That way I'll be able to get my gps directions over the stereo. That is a long way around to do it, but the 820 seems to work out pretty well as a 2.5mm adapter.
MSHampton said:
Well, I finally found an option that will work for me. My motorcycle has a 2.5mm plug for hooking a cell phone into the intercom system (it's a gold wing) It also has a 3.5mm plug for an aux device to the stereo. I got the moto hf820 from amazon for around $45. It is a bluetooth hands free device, but it also has a 2.5mm plug on it. So, the phone section of my 8525 now connects to the bluetooth 820 into the intercom through it's 2.5mm plug. For the rest of the audio, I am using one of the extusb to 3.5mm adapters. That way I'll be able to get my gps directions over the stereo. That is a long way around to do it, but the 820 seems to work out pretty well as a 2.5mm adapter.
Click to expand...
Click to collapse
Holy ****, what a rube goldberg device!!!! But, I like your ingenuity. I ride myself (BMW GS) and so I just may try to cobble together something similar to yours...
However, most people want the wired headset so that they don't have to rely upon bluetooth. I want a fall-back headset.
To be honest, I found the perfect BT headset, and so I'm not sure if I need a wired connection anymore. I bought a jawbone and have been using it for 2 months. I like it so much, I bought a *second* one for when I run down the batteries on the first one, I can just use that one. Sure, it costs me $120 a pop, but after using 6 different bluetooth headsets over the last few years, this is the first one where people can't tell that I'm on a headset. Yes, it's that good.
-Humbert
HHumbert said:
Holy ****, what a rube goldberg device!!!! But, I like your ingenuity. I ride myself (BMW GS) and so I just may try to cobble together something similar to yours...
Click to expand...
Click to collapse
That it is! I have the Kennedy CellSet (www.cellset.com) on my goldwing that integrates the cell phone as if it is a 3rd party on the intercom. Makes it kind of nice because either me or my wife can take a call while we are riding if needed. Anyway, I had the adapter for a 2.5mm plug and they don't make an adapter for the extusb of the HTC so hey, this works. Not only that, the GPS audio and the phone audio are on two different channels on the bike now. Worked out pretty good.
Hi there!
I'm interested in that problem too. So is there an adapter what is working, and tested yet?
If not, maybe we should try to cut down one ExtUSB to 3,5mm adapter and cut down the 2,5 mm side of the headset, and then maybe it can be built together, and we have a headset, with ExtUSB port.
Is it a possible way? Maybe any alternatives? God I'll be really happy if we can do something to do with this
Could always try this
www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
Massiv
2.5 and 3.5 fix for USB
I too have an expensive Shure headset with a 2.5 connector that I used on my Cingular 8125. I just moved to a Cingular 8525 e/w the ExtUSB connector.
I have been working with the tech support guys at Shure and we have sort of a fix. My Shure headset has a Mic so it needs a 4 conductor cable and the corresponding 4 wire jacks to carry voice to the handset. BIG issue. None of the current connectors (Ext USB to 2.5 or 3.5) carry the 4th wire! They will carry audio out over the 3 wires. . . stupid I guess.
So Mobile Planet and others now have a TyTN (Titan) Cingular 8525 cable adapter that is made by ORA and has its own mic, and answer/hangup control and ends in a 3.5 jack for a headset (3 wire). This means that if you have a 2.5 jack on your headset you need another adapter to reduce the 3.5 to a 2.5 (+/- $10.00 US).
Then you use the mic in the adapter. This is a real mickey mouse rig but it works and you do not have to buy another very expensive headset. You just cannot use the mic in your expensive headset! The cable is also a little long since the adapter's cable is about 20".
If you are thinking of buying a good wired headset then use the ORA adapter (Shure is about to come out with one also) and a standard Shure 3.5 headset like the SE series ($150+) which has a shorter cable. The two work nicely together. It is what I am using now. see link below:
(http://www.shure.com/PersonalAudio/Products/Earphones/SEModels/index.htm)
but they really really work well . . . and are worth the $$s
However, does anyone know if the HTC P3350 W100 Wired Remote Control(http://www.mobileplanet.com/p.aspx?i=145859) will work on an Cingular 8525?
2.5mm adapter for 8525
http://store.pchcables.com/spmoppxvat85.html
I ordered one and it works perfect. About $8 with shipping.
Rosbif22 said:
http://store.pchcables.com/spmoppxvat85.html
I ordered one and it works perfect. About $8 with shipping.
Click to expand...
Click to collapse
I'm interested in something like this. It says it works with three-connector 2.5mm jacks. Does this mean stereo headphones or mono headphones+mic? I want to have phone conversations so hopefully mono+mic.
Thanks!
For anyone who wants to order their 3.5mm solution now, take a look at this one from HTC: http://www.expansys-usa.com/p.aspx?i=159613
It’s the page for one listed as being for a Touch Cruise, but there’s a page with one for every HTC phone. I’ve been using it for a few months on my HTC Touch Cruise and it’s great. The plug itself is compact, no different in size than a 3.5mm headphone plug -- and stays put (it isn't shown in the photo). It has 2 parts, the cord with the plug at one end, and a microphone with a 3.5mm jack at the other. The other part is the throwaway earbud headphones that you can toss and use your own. No bulky dongle, and makes any favorite pair of headphones into your microphone/stereo headset. Personally, I forget HTC forgot the 3.5mm jack with this one, as it's just a cable, not an annoying adapter.
The pinout of the mini-usb jack on the G1 is the same as all other HTC phones, so at the very least the microphone and stereo audio will work. Some features of the answer-button that may or may not work on the G1: push once to answer; pushing while on a call places the call on hold; 2 quick presses redials the last number; 1 long press activates voice dial. Most likely, the button will mimick whatever functionality is present with the headset that ships with the device.
It's made by HTC, and is very durable. Beware the adapters from Seidio -- they last a couple weeks and then start to give out, audio stutters, fades in/out -- they're not constructed well and within a month or so the ends start to get loose from the wire; and you can't exactly run to Best Buy for replacements.
The budget-shipping rate from MobilePlanet.com should have them to you well before your G1 arrives
Question. How far will the microphone be from my mouth? How good is the microphone...the problem is my regular headphones are kinda long like the wire is probably a good 20 inches.
So by the time its plugged into the adapter the mic is gonna be 20 inches from my mouth..and I want to be able to pic up without using the phone? will it work?
Probably -- the mic is in the end that your headphones plug into, I don't know how long it is, but I do hold the mic up a bit when I use it as that. Primarily, I like it as it's not a dongle and in use is no different than having a 3.5mm headphone plugged in. The plug itself isn't big, it stays put, and if I need to speak on it I can. The mic quality is OK, though it picks up all background noise, and a slight breeze can sound like a windstorm. Talking on it is just a convenience for me, I really wanted a standard type stereo headphone cable that I could pick up a call on. My devices tend to be music players first, and phones 2nd.
FearlessM said:
Question. How far will the microphone be from my mouth? How good is the microphone...the problem is my regular headphones are kinda long like the wire is probably a good 20 inches.
So by the time its plugged into the adapter the mic is gonna be 20 inches from my mouth..and I want to be able to pic up without using the phone? will it work?
Click to expand...
Click to collapse
Earbuds w/out Mic/Converter?
Hey all,
I've been looking for some earbuds that don't require an adapter and just plug into the G1's current plug, or have an annoying mic; just to listen to music with.
Something that would eliminate the need for this: http://cgi.ebay.com/2-5mm-Headset-H...14&_trkparms=72:1205|66:2|65:12|39:1|240:1318
Does anyone know where I can find some?
Thx
grim1234 said:
Hey all,
I've been looking for some earbuds that don't require an adapter and just plug into the G1's current plug, or have an annoying mic; just to listen to music with.
Something that would eliminate the need for this: http://cgi.ebay.com/2-5mm-Headset-H...14&_trkparms=72:1205|66:2|65:12|39:1|240:1318
Does anyone know where I can find some?
Thx
Click to expand...
Click to collapse
While I don't endorse this company, they seem to have quite a selection. http://onlyandroid.mobihand.com/homeAccessories.asp?hCategory=1022 Personally, I am inclinded to get http://onlyandroid.mobihand.com/productaccessories.asp?id=17085&n=HTC-3-in-1-USB-Adapter so I can charge the phone and use the headset of my choice. (This adapter looks like a beast though...)
G/L,
--M
PS that website has the adapter you are looking at on ebay for less... just fyi.
mini usb to rca adapter
is there a mini usb to rca adapter that can work with the g1?
Well, it's got 2 reviews, and a rating of 1 star on the company's site... There are tons of them on eBay, wonder if those are terrible... I suspect so.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280277868575
I ordered a few of those. I will let you guys know how long it takes to get to the US and how I like the adapter itself. I also need one for the car that lets me charge and then convert to 3.5 to go into my aux input in my car.
haitiankid4lyf said:
is there a mini usb to rca adapter that can work with the g1?
Click to expand...
Click to collapse
Might be easiest to go USB -> 3.5mm -> RCA. Not elegant but parts are available.
--M
yeah i was thinking about that, but two different adapters but i guess thats the only way for now
thanks
http://www.google.com/products?q=mini+usb+to+rca&btnG=Search+Products&hl=en&show=dd
found some but dont know if they will work
Here is a good 3.5 adapter that lets you charge at the same time.
http://www.expansys-usa.com/p.aspx?i=171920
benjimen said:
Probably -- the mic is in the end that your headphones plug into, I don't know how long it is, but I do hold the mic up a bit when I use it as that. Primarily, I like it as it's not a dongle and in use is no different than having a 3.5mm headphone plugged in. The plug itself isn't big, it stays put, and if I need to speak on it I can. The mic quality is OK, though it picks up all background noise, and a slight breeze can sound like a windstorm. Talking on it is just a convenience for me, I really wanted a standard type stereo headphone cable that I could pick up a call on. My devices tend to be music players first, and phones 2nd.
Click to expand...
Click to collapse
how do you find the audio quality through headphones? little worried as i hear through its own speakers it can be a litte on the quiet side :/
bobby digital said:
how do you find the audio quality through headphones? little worried as i hear through its own speakers it can be a litte on the quiet side :/
Click to expand...
Click to collapse
Same volume as the headset that ships with it. Try it and see.
sorry i wasnt clear, i didnt mean does an adaptor effect the sound, purely what is mp3 quality and sound like through headphones generally on g1 (standard headphones or not) compared to say i-phone,nokia,sony erricson etc
Sounds good to me.
i have one of those adapters, i got it for my wing way back, i think they were like 99 cents or something so i bought a bunch, they wear out pretty fast though, there nice to play music from my g1 in my car, i just wish there was a way to keep the microphone on the phone so i could talk on the phone and have the audio come through my cars speakers.
Headphone adapter
The newer G1s are shipping with a really nice official headphone adapter in the box, but I can't find it for sale anywhere. Are early adopters just left out in the cold with no headphone support? HTC has these ExtUSB ports on every one of their phones but they don't seem to sell any official adapters so I'm going to be stuck buying sub-par chinese adapters off of Ebay.
anyone have any pictures of what the headphone adapters look like?
wth, i want one official one! maybe calling t-mobile, they will send us one?
It looks the same as the standard headphones the only difference is that at the head phones them selves aren't attached to the remote (one end of the remote is the usb cable and the other is a 3.5mm port) they are 3.5mm head phones. I called t-mobile about it because my brother got one and they said they new nothing they said it wasn't on the packing list so I called HTC and they said they new nothing and since there was no bulletin they could not send me anything. I went to my local t-mobile store asked them about it and they gave me a new one out of a returned phone. The reason that tmobile says that they are not shipping them with a 3.5mm adapter is because its just a modified head phone and not an adapter and head phones in the box. I would recommend going to your local t-mobile store and asking about it.
Sorry about the picture quality I took them with my super G1 camera.