Hello Guys.
After crashing my last XDA the "new" one arrived on Friday.
Used the home cooked 3.17. ROM VErsion and all looks fine.
After the restore from SD-Card all Application are their, just have to register new Tomtom.
But today I´ve done a soft reset to enter the bootloader. Works fine. Nothing done in the bootloader and started the device new.
All data are missing. PocketPC Theme is far far away, no Owner Information, activesync needs to be configured new, have to install all software new or restore the backup.....
Just liike after a hard reset.
What is wrong ?
Cheers
Stefan
it is not bug, it is a feature I do the same thing last monday
If you enter the bootloader on 4.x, this always happens (at least to me...)
LumpiStefan said:
Hello Guys.
After crashing my last XDA the "new" one arrived on Friday.
Used the home cooked 3.17. ROM VErsion and all looks fine.
After the restore from SD-Card all Application are their, just have to register new Tomtom.
But today I´ve done a soft reset to enter the bootloader. Works fine. Nothing done in the bootloader and started the device new.
All data are missing. PocketPC Theme is far far away, no Owner Information, activesync needs to be configured new, have to install all software new or restore the backup.....
Just liike after a hard reset.
What is wrong ?
Cheers
Stefan
Click to expand...
Click to collapse
You say restore from SD card backup, was that backup from ROM older than 3.17? If so thats what caused your problem. You can't restore from a backup of a different ROM you have to re-install all of your software.
HTH
Hello,
I followed the newbie tutorial on flashing WM6 ROM to my G4 Wizard. After a few tries, it seems everything went well. But now the phone seems to be bugging out. I upgraded to NBD 9.2 from the OEM WM5 ROM.
First off, I lost all my information/history such as contacts, texts, calls, etc. How do I restore these?
Alternatively, is there a way to go back to the original WM5? Do I need to remove HardSPL? I thought that was only when you were sending it back for service so they can't detect you did anything to your phone.
I am not getting any phone service at all. It won't bring up the keypad to dial either. The internet seems fine however.
Right after flashing, I think there was a program called PIM Restore, but now it seems to be missing.
I have soft reset it since the flash, but nothing. I don't want to hard reset for fear of losing all my data, even though it appears none of it is there since the flash.
ChosenWon said:
Hello,
I followed the newbie tutorial on flashing WM6 ROM to my G4 Wizard. After a few tries, it seems everything went well. But now the phone seems to be bugging out. I upgraded to NBD 9.2 from the OEM WM5 ROM.
First off, I lost all my information/history such as contacts, texts, calls, etc. How do I restore these?
Alternatively, is there a way to go back to the original WM5? Do I need to remove HardSPL? I thought that was only when you were sending it back for service so they can't detect you did anything to your phone.
I am not getting any phone service at all. It won't bring up the keypad to dial either. The internet seems fine however.
Right after flashing, I think there was a program called PIM Restore, but now it seems to be missing.
I have soft reset it since the flash, but nothing. I don't want to hard reset for fear of losing all my data, even though it appears none of it is there since the flash.
Click to expand...
Click to collapse
First, flashing a new rom will remove all the files on the phone including your personal data/contacts/mssgs etc etc,they all are lost,you shud have first backed them up,now there's no way to restore them back,yes ! PIMbackup is the application with which you shud have backed up all your data to your pc.
Perhaps,its a bad flash thats why its bugging out,either reflash or try any other latest custom build wm6 or wm6.1,hope you'll get a much faster response and wonderful experience.
Well,as you say,all the data is already lost,there's no harm in doing Hard Reset,it might get it working correctly.Hard Reset is what I recommend otherwise,reflash.
You can download the PIMbackup software from the forum and install it anytime and backup your data.
Well,if you want to revert back to original wm5,you'll have to first remove HardSPL,only than you can revert back,otherwise you'll Brick the phone.
zabardast_1 said:
First, flashing a new rom will remove all the files on the phone including your personal data/contacts/mssgs etc etc,they all are lost,you shud have first backed them up,now there's no way to restore them back,yes ! PIMbackup is the application with which you shud have backed up all your data to your pc.
Perhaps,its a bad flash thats why its bugging out,either reflash or try any other latest custom build wm6 or wm6.1,hope you'll get a much faster response and wonderful experience.
Well,as you say,all the data is already lost,there's no harm in doing Hard Reset,it might get it working correctly.Hard Reset is what I recommend otherwise,reflash.
You can download the PIMbackup software from the forum and install it anytime and backup your data.
Well,if you want to revert back to original wm5,you'll have to first remove HardSPL,only than you can revert back,otherwise you'll Brick the phone.
Click to expand...
Click to collapse
OK, UPDATE:
So last night I turned the phone off and turned it back on and now the phone works (as in makes & receives calls). It's still twitchy, but everything seems to work except the Contacts & PocketCM. When you try to use them, it looks like it's trying to open, but then closes.
As far as the backup, I had a feeling I was in for that but wasn't sure. Maybe we should have a warning in the newbie tutorial that tells everyone: ALL DATA WILL BE LOST! BACK UP ALL THINGS PRECIOUS TO YOU! I read somewhere that to save your contacts, you just copy your PIM file to storage and paste it back after flashing. I did do that, however it doesn't seem to work. It didn't cross my mind to copy the contacts through Outlook. I didn't have PIMbackup before flashing, but the ROM included it, but now it seems to be missing altogether.
Here's the weird thing though. So all data is supposed to be lost after flashing right? Well after my phone decided to start working again, I checked call history & all my old calls are still there, with names & everything. Is this supposed to be right? All the new calls however don't have names & I can't add them because I can't access Contacts. If all data is to be lost, shouldn't the call history be gone, too? This makes me wonder if all my data is really lost or if it is somehow recoverable on the phone.
How do I reflash? Just do the entire process over again? Do I just reflash over, or should I remove something first (sorry newbie question)? Is there a way to revert to WM5 without removing HardSPL?
Thanks.
Hi all, I have a strange problem during the calls.
The call start normally but then a buzz-noise starts, at this point I cannot ear anymore the other person. I can end the call, but still the noise is there. The phone doesn't seem blocked. The buzz is unstoppable until I reset the phone and restart. This problem happens quite often and so my phone is quite unusable...
I have these versions:
build: 21876.5.0.72
software: 5005.0001.76
SP-00
RIL 1.0
radio: 5001.0001.76
If someone has the same problem or know how to solve, I will appreciate the help.
Thanks
Ivan
ivan1975 said:
Hi all, I have a strange problem during the calls.
The call start normally but then a buzz-noise starts, at this point I cannot ear anymore the other person. I can end the call, but still the noise is there. The phone doesn't seem blocked. The buzz is unstoppable until I reset the phone and restart. This problem happens quite often and so my phone is quite unusable...
I have these versions:
build: 21876.5.0.72
software: 5005.0001.76
SP-00
RIL 1.0
radio: 5001.0001.76
If someone has the same problem or know how to solve, I will appreciate the help.
Thanks
Ivan
Click to expand...
Click to collapse
Try a custom rom. Flash it with better radio roms that are available on this forum. If you haven't flashed your phone before, please read the instructions in the TG01 Rom section's sticky carefully. http://forum.xda-developers.com/showthread.php?t=654674
I had similar problem with Orange rom and after flash, I have never had any so called call issues.
drupad2drupad said:
Try a custom rom. Flash it with better radio roms that are available on this forum. If you haven't flashed your phone before, please read the instructions in the TG01 Rom section's sticky carefully. http://forum.xda-developers.com/showthread.php?t=654674
I had similar problem with Orange rom and after flash, I have never had any so called call issues.
Click to expand...
Click to collapse
yes I already flashed it the same day I bought it. It was with the french Orange version, so I changed to the uk Orange version. I was thinking to try a custom rom but I am afraid to have then more instability respect to the official one.
I can say that the quality of the call when there is not the strange buzz-noise is good.
What type of ROM can you suggest? I mean a stable and robust one.
Thanks
Ivan
If you want to stick to just a neat rom with most programs removed, so that you can customize by adding cabs yourself - go for FFBoy's or miRoM
If you want something sense based - Aragon's rom or StonRom.
If you want to be adventurous and try something different - StonRom's maker Leeston, has put out couple of roms which are not very stable, but usable. You can also try miRom's hybrid rom which has spb shell, sense etc all mixed up.
There are plenty of sense roms out there by Aragon, FFboy, miRom, Leeston that I have used and I like.
I personally don't find any of the sense roms stable as there is an issue with HTC messaging and sometimes wireless. I haven't seen any solution to HTC messaging till date. Hence I have stopped using them.
I like Leeston's roms that are not Sense based. But they are being tweaked by Leeston to make them better, so you might not call them 'stable' just yet.
I am currently using miRom's clean stock rom. I had plenty of space so I have installed about 23 cabs on it to customize by my needs - even after that it's fast, stable, no-freeze, no hard resets needed, plenty of available memory and very usable.
drupad2drupad said:
If you want to stick to just a neat rom with most programs removed, so that you can customize by adding cabs yourself - go for FFBoy's or miRoM
If you want something sense based - Aragon's rom or StonRom.
If you want to be adventurous and try something different - StonRom's maker Leeston, has put out couple of roms which are not very stable, but usable. You can also try miRom's hybrid rom which has spb shell, sense etc all mixed up.
There are plenty of sense roms out there by Aragon, FFboy, miRom, Leeston that I have used and I like.
I personally don't find any of the sense roms stable as there is an issue with HTC messaging and sometimes wireless. I haven't seen any solution to HTC messaging till date. Hence I have stopped using them.
I like Leeston's roms that are not Sense based. But they are being tweaked by Leeston to make them better, so you might not call them 'stable' just yet.
I am currently using miRom's clean stock rom. I had plenty of space so I have installed about 23 cabs on it to customize by my needs - even after that it's fast, stable, no-freeze, no hard resets needed, plenty of available memory and very usable.
Click to expand...
Click to collapse
Thanks
yes I prefer stability in a phone, thinking also to the emergency call. Thinking that the phone could freeze during an emergency call, make me unconfortable.
I will try a clean rom.
Thanks for the help
ivan1975 said:
Thanks
yes I prefer stability in a phone, thinking also to the emergency call. Thinking that the phone could freeze during an emergency call, make me unconfortable.
I will try a clean rom.
Thanks for the help
Click to expand...
Click to collapse
Good luck mate! I hope it works out well for you.
It's real annoying when phones stop working as phone but more like iPhone!
Also, through experience radio 1600/1700 work better. But depends on network provider. For me 1600 is better than 1700.
drupad2drupad said:
Good luck mate! I hope it works out well for you.
It's real annoying when phones stop working as phone but more like iPhone!
Also, through experience radio 1600/1700 work better. But depends on network provider. For me 1600 is better than 1700.
Click to expand...
Click to collapse
I was thinking to have solved the problem, but not. I installed both the mirom4 and the mirom8 but the same call problem (both with radio 1700). The mirom8 is perfect, but I cannot use the phone. I first buyed this phone with the french language and win 6.5.0 so I tryed to install back an official toshiba rom with the french language and it works . The phone works. With the official english version it doesn't work. The radio of this version is the 5001.0201.76 and the build of the system is 21876.5.0.72 exactly as the english version but only the radio is different.
Could someone explain me why it works only with the french operating system?
An other test! I installed the spb shell 3.5.5 on the french operating system and the phone makes the same problem....
Deinstalling it, and only after an hard reset the phone works again.
Why the hard reset is necessary, what are the components of the spb shell that can cause the problem?
At this point I believe it is a software problem...
To describe better the problem I saw that when the audio freeze during the conversation, if I try to modify the volume settings the window with the volumes appears but I can see only the system volume while the phone volume is a black empty space. The phone is responsive for a while, then it crash completely and only after a soft reset it restars.
It is a big big problem
ivan1975 said:
I was thinking to have solved the problem, but not. I installed both the mirom4 and the mirom8 but the same call problem (both with radio 1700). The mirom8 is perfect, but I cannot use the phone. I first buyed this phone with the french language and win 6.5.0 so I tryed to install back an official toshiba rom with the french language and it works . The phone works. With the official english version it doesn't work. The radio of this version is the 5001.0201.76 and the build of the system is 21876.5.0.72 exactly as the english version but only the radio is different.
Could someone explain me why it works only with the french operating system?
An other test! I installed the spb shell 3.5.5 on the french operating system and the phone makes the same problem....
Deinstalling it, and only after an hard reset the phone works again.
Why the hard reset is necessary, what are the components of the spb shell that can cause the problem?
At this point I believe it is a software problem...
To describe better the problem I saw that when the audio freeze during the conversation, if I try to modify the volume settings the window with the volumes appears but I can see only the system volume while the phone volume is a black empty space. The phone is responsive for a while, then it crash completely and only after a soft reset it restars.
It is a big big problem
Click to expand...
Click to collapse
Try the italian radio
5001.0300.76
All european users have positive feedback using it
ivan1975 said:
I was thinking to have solved the problem, but not. I installed both the mirom4 and the mirom8 but the same call problem (both with radio 1700). The mirom8 is perfect, but I cannot use the phone.
Could someone explain me why it works only with the french operating system?
An other test! I installed the spb shell 3.5.5 on the french operating system and the phone makes the same problem....
Deinstalling it, and only after an hard reset the phone works again.
Why the hard reset is necessary, what are the components of the spb shell that can cause the problem?
To describe better the problem I saw that when the audio freeze during the conversation, if I try to modify the volume settings the window with the volumes appears but I can see only the system volume while the phone volume is a black empty space. The phone is responsive for a while, then it crash completely and only after a soft reset it restars.
It is a big big problem
Click to expand...
Click to collapse
When you say miROM8 is perfect but you cannot use the phone - does it mean, it doesn't flash properly or it keeps freezing? or does it only have call issues? I remember miROM talking somewhere about different language issues in his posts, I will try and dig into it. I am sure there is some sort of solution for language issues with roms and SPB Shell too - just hang in there.
I am presuming it's an radio issue now. But there is a way to change radios irrespective of what rom you install. its here - http://forum.xda-developers.com/showthread.php?t=699764
wafeeq said:
Try the italian radio
5001.0300.76
All european users have positive feedback using it
Click to expand...
Click to collapse
I have not tried this radio, but would be worth a go if it is going to make my phone even better!
drupad2drupad said:
When you say miROM8 is perfect but you cannot use the phone - does it mean, it doesn't flash properly or it keeps freezing? or does it only have call issues? I remember miROM talking somewhere about different language issues in his posts, I will try and dig into it. I am sure there is some sort of solution for language issues with roms and SPB Shell too - just hang in there.
I am presuming it's an radio issue now. But there is a way to change radios irrespective of what rom you install. its here - http://forum.xda-developers.com/showthread.php?t=699764
I have not tried this radio, but would be worth a go if it is going to make my phone even better!
Click to expand...
Click to collapse
With Mirom8 the system is fast and stable and the issue of the call that freeze happens only after some minutes (2-3 minutes). With mirom4 instead the problem is quite simultaneus at the start of the call (less than one minute). Mhmm I am not sure if it is a radio issue. If it is a radio issue, why the french version stopped to work when I installed the spb shell? Does the spb shell modify the radio files?? I was more thinking to a windows problem. But I am completely ignorant about this system and how it works.
I could try the italian radio, but I am starting to be afraid that I will never find a stable solutuion. I am thinking it is a software problem, but I cannot exclude an hardware failure of my system.
Thanks
Ivan
ivan1975 said:
With Mirom8 the system is fast and stable and the issue of the call that freeze happens only after some minutes (2-3 minutes). With mirom4 instead the problem is quite simultaneus at the start of the call (less than one minute). Mhmm I am not sure if it is a radio issue. If it is a radio issue, why the french version stopped to work when I installed the spb shell? Does the spb shell modify the radio files?? I was more thinking to a windows problem. But I am completely ignorant about this system and how it works.
I could try the italian radio, but I am starting to be afraid that I will never find a stable solutuion. I am thinking it is a software problem, but I cannot exclude an hardware failure of my system.
Thanks
Ivan
Click to expand...
Click to collapse
hello Ivan,
load my RADIO changing Kitchen. http://forum.xda-developers.com/showthread.php?t=823706
With this you can extract the FRENCH Radio and combine with another ROM, as miROM8.
hope it helps, miro
ivan1975 said:
With Mirom8 the system is fast and stable and the issue of the call that freeze happens only after some minutes (2-3 minutes). With mirom4 instead the problem is quite simultaneus at the start of the call (less than one minute). Mhmm I am not sure if it is a radio issue. If it is a radio issue, why the french version stopped to work when I installed the spb shell? Does the spb shell modify the radio files?? I was more thinking to a windows problem. But I am completely ignorant about this system and how it works.
I could try the italian radio, but I am starting to be afraid that I will never find a stable solutuion. I am thinking it is a software problem, but I cannot exclude an hardware failure of my system.
Thanks
Ivan
Click to expand...
Click to collapse
mirolg said:
hello Ivan,
load my RADIO changing Kitchen. http://forum.xda-developers.com/showthread.php?t=823706
With this you can extract the FRENCH Radio and combine with another ROM, as miROM8.
hope it helps, miro
Click to expand...
Click to collapse
I don't think SPB will have any effect on radios. Try Miro's solution, it will work. Did you see if your SPB version has got correct language? There is some sort of registry edit too, regarding SPB shell - it comes in many languages. However, let's not go into reg edit just yet, if Miro's solution will solve it for you.
Also one important thing - are you flashing the rom correctly? i.e. hard reset after the flash by holding volume up + camera + power? It makes a huge difference by doing so. If it doesn't work, try flashing stock rom, then hard reset, then miROM8 then hard reset, then spb shell and then soft reset - this might solve if it's silly bug!
Good luck
drupad2drupad said:
I don't think SPB will have any effect on radios. Try Miro's solution, it will work. Did you see if your SPB version has got correct language? There is some sort of registry edit too, regarding SPB shell - it comes in many languages. However, let's not go into reg edit just yet, if Miro's solution will solve it for you.
Also one important thing - are you flashing the rom correctly? i.e. hard reset after the flash by holding volume up + camera + power? It makes a huge difference by doing so. If it doesn't work, try flashing stock rom, then hard reset, then miROM8 then hard reset, then spb shell and then soft reset - this might solve if it's silly bug!
Good luck
Click to expand...
Click to collapse
Hi guys I quoted only one answer but I thanks all of you. So I think that your suggestions are good. I must try to create a rom with the radio that presumably could work with the rest that I like. I made the hard reset every time I flashed a new rom. So what I can do is to make the hybrid rom and then flash it on the phone after the stock rom making an hard reset every time.
Ok I will try, I like this little piece of tecnology
Hi all, so an update to the situation. I tried to install the radio 5001.0300.76 on the mirom8, but after the installation i choosed the spb shell as interface without trying a first call on the fresh installation.
I made a tentative after the installation of the spb shell and I was unable to make a call longer than 30 seconds.
So I used the rom 5001.0201.76 from the french rom in the mirom8. This time I tried to make a call without setting the spb shell as interface but using first the windows interface.
It worked!!! I was able to make a call!
Then I tryed to use the spb shell and the same problem! The call was freezing.
So I tried with the HTC interface and it is working!
I don't know if with the radio 5001.0300.76 could work. I think yes. But for the moment I will keep this version.
The only thing is that I prefer the spb shell and not the HTC but for now I am happy to have a working phone.
I am wondering, what is the cause of this failure? Is my phone buggy? I mean the hardware of my phone in theory is the same of yours, so why I am not able to run all the roms?
ivan1975 said:
Hi all, so an update to the situation. I tried to install the radio 5001.0300.76 on the mirom8, but after the installation i choosed the spb shell as interface without trying a first call on the fresh installation.
I made a tentative after the installation of the spb shell and I was unable to make a call longer than 30 seconds.
So I used the rom 5001.0201.76 from the french rom in the mirom8. This time I tried to make a call without setting the spb shell as interface but using first the windows interface.
It worked!!! I was able to make a call!
Then I tryed to use the spb shell and the same problem! The call was freezing.
So I tried with the HTC interface and it is working!
I don't know if with the radio 5001.0300.76 could work. I think yes. But for the moment I will keep this version.
The only thing is that I prefer the spb shell and not the HTC but for now I am happy to have a working phone.
I am wondering, what is the cause of this failure? Is my phone buggy? I mean the hardware of my phone in theory is the same of yours, so why I am not able to run all the roms?
Click to expand...
Click to collapse
First of all, I am so glad you can now use your phone as a phone!
Secondly, I think it's something to do with bugs left from your installation.
I would even advice you another flash process : This one has ALWAYS worked for me, when I thought I had bugs that won't go with hard reset. I don't know if 'bugs left after hard reset' theory is true technically, but for me it works. Try the following:
Get the phone back up so that you don't have to look for contacts.
You can also get a program called - XDA_UC - it's brilliant piece of work. Put all your cabs for this program as instructed and you won't ever have to worry about installing cabs after flash - http://forum.xda-developers.com/showthread.php?p=6928610#post6928610
Once you are ready, hard reset your phone. Then get miROM4 http://www.miromworld.webs.com/ to flash on it. Hard reset etc after flash. Then install clean SPB SHELL on this miROM4 - it works like charm. If you want customization, use MSkip's Ultimate Elegance V2
http://forum.xda-developers.com/showpost.php?p=5373943&postcount=1715
and you will never not love your phone. Just remember to edit the radio in miROM4 before you flash. I have got this on my phone and it works fast, stable, beautiful, accessible and fun!
Hope this helps.
drupad2drupad said:
First of all, I am so glad you can now use your phone as a phone!
Secondly, I think it's something to do with bugs left from your installation.
I would even advice you another flash process : This one has ALWAYS worked for me, when I thought I had bugs that won't go with hard reset. I don't know if 'bugs left after hard reset' theory is true technically, but for me it works. Try the following:
Get the phone back up so that you don't have to look for contacts.
You can also get a program called - XDA_UC - it's brilliant piece of work. Put all your cabs for this program as instructed and you won't ever have to worry about installing cabs after flash - http://forum.xda-developers.com/showthread.php?p=6928610#post6928610
Once you are ready, hard reset your phone. Then get miROM4 http://www.miromworld.webs.com/ to flash on it. Hard reset etc after flash. Then install clean SPB SHELL on this miROM4 - it works like charm. If you want customization, use MSkip's Ultimate Elegance V2
http://forum.xda-developers.com/showpost.php?p=5373943&postcount=1715
and you will never not love your phone. Just remember to edit the radio in miROM4 before you flash. I have got this on my phone and it works fast, stable, beautiful, accessible and fun!
Hope this helps.
Click to expand...
Click to collapse
Thanks
I would also try to make my own rom
Here I found a lot of help
I am also interested in android on our phone. I saw that they are quite succeding in booting the kernel. I would also try this, becasue at work I am using linux and I am programming under linux.
Having linux on our phone could be very useful.
Thanks I will try the procedure you suggested!
Ciao
ivan1975 said:
Thanks
I would also try to make my own rom
Here I found a lot of help
I am also interested in android on our phone. I saw that they are quite succeding in booting the kernel. I would also try this, becasue at work I am using linux and I am programming under linux.
Having linux on our phone could be very useful.
Thanks I will try the procedure you suggested!
Ciao
Click to expand...
Click to collapse
cool, cool, cooll. i will to be the first that testing your AndroidROM!
i wish you a good work
ivan1975 said:
Thanks
I would also try to make my own rom
Here I found a lot of help
I am also interested in android on our phone. I saw that they are quite succeding in booting the kernel. I would also try this, becasue at work I am using linux and I am programming under linux.
Having linux on our phone could be very useful.
Thanks I will try the procedure you suggested!
Ciao
Click to expand...
Click to collapse
I am using Linux on my laptop at home too! I can't say how excited I am to use linux. I wish I could know more about linux, but I've just ditched Windows about 2 months back. So I am a very newbie with no idea to linux cmd line but only GUI. If you need tester for anything please let me know.
drupad2drupad said:
I am using Linux on my laptop at home too! I can't say how excited I am to use linux. I wish I could know more about linux, but I've just ditched Windows about 2 months back. So I am a very newbie with no idea to linux cmd line but only GUI. If you need tester for anything please let me know.
Click to expand...
Click to collapse
eh eh eh no no quiet! I am saying I would try the kernel that the guys in toshdroid are implementing now. I am using linux since more than 15 years. But using and programming under linux is a different thing than the ability to make reverse enginering on a complex device as our phone. It is a very complex job.
But I want try to boot the kernel that the toshdroid developers are testing
For now I am enjoing the working phone
drupad2drupad said:
First of all, I am so glad you can now use your phone as a phone!
Secondly, I think it's something to do with bugs left from your installation.
I would even advice you another flash process : This one has ALWAYS worked for me, when I thought I had bugs that won't go with hard reset. I don't know if 'bugs left after hard reset' theory is true technically, but for me it works. Try the following:
Get the phone back up so that you don't have to look for contacts.
You can also get a program called - XDA_UC - it's brilliant piece of work. Put all your cabs for this program as instructed and you won't ever have to worry about installing cabs after flash - http://forum.xda-developers.com/showthread.php?p=6928610#post6928610
Once you are ready, hard reset your phone. Then get miROM4 http://www.miromworld.webs.com/ to flash on it. Hard reset etc after flash. Then install clean SPB SHELL on this miROM4 - it works like charm. If you want customization, use MSkip's Ultimate Elegance V2
http://forum.xda-developers.com/showpost.php?p=5373943&postcount=1715
and you will never not love your phone. Just remember to edit the radio in miROM4 before you flash. I have got this on my phone and it works fast, stable, beautiful, accessible and fun!
Hope this helps.
Click to expand...
Click to collapse
After some days of work, I was quite happy, but today the same problem. I was on a call and suddelny the crash. No SPB shell, no other software installed. I will try as last tentative the procedure of flash different times with the master clear. If then I will have the same problem I will send back the phone. At this point I cannot exclude that my phone is buggy in the hardware
Hi guys, this morning my father's Le Max 2 (snap820, 4/64) stopped receiving calls, and both the home and recent apps virtual buttons decided not to function, too. Strange enough, I'm able to long press them and get the action I'm supposed. Any ideas/fix? I've already checked the phone for malicious apps and misconfigurations
Hi, I have exactly the same issue, plus I cant download any more applications from play store. Can anyone help?
If you have a backup taken when the phone was working well, I'd suggest you to restore it. If not, try another ROM, or at least a different ROM flavor (if it had an EUI based ROM, use LineageOS and viceversa). If that doesn't work, you may need to get into Qualcomm recovery mode and flash the developers ROM to get the phone to a real factory state.
But first, try to revert to factory settings from the current ROM, and see if that solves the issue.
There are several threads here with info on how to apply the above solutions.
If none of these solutions works, and you still have warranty time left, you may want to contact the seller for a repair or replacement.
Good luck.
Do the notifications work?
I was on holiday, so no PC I could use for flashing or else. A reset from the settings worked, still don't know what caused the issue sadly
I couldn't find the fix for this in any other threads, can someone help a not-terribly-tech-savvy person with a fix for this
Today I also had a same problem. So just I backed up all important data's and done factory reset. Now everything works fine.
Everyone have same problem at the same time means the ROM has virus or Trojan.
What is the ROM everyone is using?