i found the following slip-in style case...
http://www.more-thing.com/vintage-collection-htc-touch-hd.html?osCsid=tpgq788q6gh612o9n685fd3sg0
but i always want a bigger choice
does anybody know of some similar cases???
fits
qtype said:
i found the following slip-in style case...
http://www.more-thing.com/vintage-collection-htc-touch-hd.html?osCsid=tpgq788q6gh612o9n685fd3sg0
but i always want a bigger choice
does anybody know of some similar cases???
Click to expand...
Click to collapse
I ordered this one.
It's for iphone 3GS & I hope it fits for my blackstone.
Dimensions
(width x height x depth):
Apple iPhone 3GS 16GB
62.1 x 115.5 x 12.3 millimetres
2.4 x 4.5 x 0.5 inches
HTC Touch HD T8282 (HTC Blackstone 100)
62.8 x 115 x 12 millimetres
2.5 x 4.5 x 0.5 inches
compare
hi, id love a posh leather slip in with 4 card slots on the back.
i have a krusell slip in which is lovely, with 4 slots for cards i could ditch my wallet
bgumble said:
I ordered this one.
It's for iphone 3GS & I hope it fits for my blackstone.
Dimensions
(width x height x depth):
Apple iPhone 3GS 16GB
62.1 x 115.5 x 12.3 millimetres
2.4 x 4.5 x 0.5 inches
HTC Touch HD T8282 (HTC Blackstone 100)
62.8 x 115 x 12 millimetres
2.5 x 4.5 x 0.5 inches
compare
Click to expand...
Click to collapse
mine arrived today. it's not a slip case - but better - it's a flip case!
have a look here
nooo to flip cases
always the iphonewallet 2.0 i guess
How about any slip-in case with a hole for the sound??
I ordered the BOA case for Iphone 3G. At first it was way too tight, after a couple of days it got better and better.
The claim that it is the slimmest case in the world. www.boastyles.com
I've just bought this nice case to my Blackstone
Hi Guys,
This is my first post with the forum, and so far, I love it
I just bought this cover/casing for my HD / Blackstone, and it works perfekt. The inside of it is covered with some kind of textile, so it slides nicely in and out, and the grip is so far (i've had it for a week) very good. The resistance is quite firm, but I will keep you update you on how it is after some time...
http://www.mytrendyphone.dk/shop/htc-touch-touch-18113p.html
Related
Have anyone ordered the ikonic edge SuperSlim case for the THD??, it's originaly desgined for the iphone 3G, but as it's 100% genuine leather it can be stretched a little bit to fit the THD.
Moreover, I've contacted them to ask if it fits the THD. And here is the reply:
-----------Quote
Yes the dimensions are almost identical.
In fact I have had a few customers who has bought one
for the HTC. There is no reason why it shouldn't
be a very good fit. I don't have the inner dimensions
but going by the size it will fit the HTC.
iphone 3G Dimensions:
(115.5 by 62.1 by 12.3 mm)
# Weight: 4.7 ounces (133 grams)
HTC Touch HD Specs:
* Dimensions: 115 mm x 63 mm x 12 mm
* Weight: 146 gms
Regards
Dominic
______________________________
Tel (64) (09) 4808386
Mobile (64) 021 50 8686
www.iconic.co.nz
New Zealand's Online Design Shop
-----------UnQuote
But, still am not sure if it will perfectly fit and didn't decide to order one yet!
The leather and design is nice. wondering anyone use to before i get one.
Very nice, makes me proud to be a Kiwi. Was going to order one and in NZ$ and get it sent but works out I would only save a few £ due to the terrible sterling rate
provide information about the fitting of the phone once you get hold of this leather pouch. the temtation of this case is raising from me.
Anyone bought this case yet? please advise if the fitting is not too tight for HD.
Well, since no one reponded yet here is a reply I got from Ikonic Edge regarding this matter:
Hi
We have sold a number of these to HTC
Touch owners as the dimensions are almost
the same. So it fits just as well with the HTC.
Regards
Dominic
______________________________
Tel: (64) (09) 4808386
Fax: (64) (09) 4181142
www.ikonicedge.com
New Zealand Handmade Leather Pouches
Click to expand...
Click to collapse
I am planning on ordering one when I get my HD
Browsing through the site, these cases seem very good quality. One question that occurs to me though; if they're made for the fruitphone, the 'speaker opening' that they tout in their description won't be in the correct place for our HDs.
I have ordered an ikonic edge Super-Slim Card pouch (iPhone 3G) tan colour for my Blackstone.
I will post some pics and short review as soon as I receive it
Hi, any pics yet?
No not yet, didn't receive it yet, hopefully tomorrow!
I'll let u know
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
Well, do the Blackstone designated cases/pouches have an opening on the back
soundonly said:
you may not hear any ringtone at all
the speaker of HD is on the back not like iphone on the side
Click to expand...
Click to collapse
There's nothing to worry about as far as the ringing tone goes. I have several different leather pouches designed for Iphone that work perfectly with HD. And since Touch HD actually has the loudest speakerphone out of the whole touch-screen bunch, I can confirm that keeping it inside leather pouch does not affect ringing volume.
I actually noticed that the default HTC soft pouch muffles the sound more then the leather ones.
As for the dimensions, most Iphone accessories will fit Touch HD as well. Only possible problem is that HD is slightly fatter at the bottom, so some stretching may be necessary.
No pics yet???
yeah any updates on this case? interested in getting one but wanted to know from someone who already has one.
It is here....
Ok guys, I got the pouch a couple of days ago
It is just awesome
I'll be posting a review with pics later this evening... stay tuned
The review is up...
Check out the review with pics for this pouch here:
http://forum.xda-developers.com/showthread.php?p=4034898#post4034898
Is the same like X?
Only the weight varies by 5gms. Nothing difference in size
shree.cse said:
Only the weight varies by 5gms. Nothing difference in size
Click to expand...
Click to collapse
Not true - the X+ is thinner. Read the spec again.
Dave Trouser said:
Not true - the X+ is thinner. Read the spec again.
Click to expand...
Click to collapse
according to the website for the One X+ for at&t, its thicker than the one xl http://www.htc.com/us/smartphones/htc-one-x-plus-att/
One X+ (at&t) 134.8 x 69.9 x 8.99 mm
One XL (at&t) 134.87 x 69.9 x 8.89mm
One X (int'l) 134.36 x 69.9 x 8.9 mm
http://www.htc.com/us/smartphones/htc-one-x-plus-att/
http://www.htc.com/us/smartphones/htc-one-x-att/
http://www.htc.com/www/smartphones/htc-one-x/#specs
So i presume, most of the cases for the One X will fit the One X+ ?
If so that is great news.
Schumi 01 said:
So i presume, most of the cases for the One X will fit the One X+ ?
If so that is great news.
Click to expand...
Click to collapse
Should be close, but probably depends on the case. It looks like exiting One X/ XL cases will fit somewhat more snugly and, depending on how rigid a case it is, it may be too snug to fit. I guess there's just one way to find out for sure.
WA_Bob said:
Should be close, but probably depends on the case. It looks like exiting One X/ XL cases will fit somewhat more snugly and, depending on how rigid a case it is, it may be too snug to fit. I guess there's just one way to find out for sure.
Click to expand...
Click to collapse
Thanks, it will be touch and go i think, like you said the only way to find out and that would be to buy a case.
I hope it's not much of a difference since I got the Extended Mugen Battery case 3200mAh not to long ago...
I just purchased the Faxion for the DNA and should be arriving late this week. Because it's newer than the dual pro or feather, I was unable to find pictures or reviews of them on a dna. Anyone have the faxion for this phone? I bought mine in black and decided on it rather than the dual pro because it's supposed to be a bit slimmer and narrower. But my wife has the dual pro for her SG3 and looks to be excellent quality so I'm hoping I like the faxion purchase I made sight unseen.
Where'd you order it from?
It's on the Incipio website but I searched on amazon and found it there as well for $28.99 + $2.97 shipping, so I ordered it from there.
Mind making a little review of the case for us? or just give us some insight about the case since you physically have it? Way better than looking at pictures.
blackstallion said:
It's on the Incipio website but I searched on amazon and found it there as well for $28.99 + $2.97 shipping, so I ordered it from there.
Click to expand...
Click to collapse
Cool I ordered one as well
Sent from my red DNA
I like the look of this case a lot. It looks like it will protect well enough for my needs while still being fairly thin.
Is there anyway the back status light is still going to be visible? That might be the deciding factor for me.
Rollingthunder said:
I like the look of this case a lot. It looks like it will protect well enough for my needs while still being fairly thin.
Is there anyway the back status light is still going to be visible? That might be the deciding factor for me.
Click to expand...
Click to collapse
Unless you drill a hole in it, no.
But I think that literally 1 case has a hole for it, so I don't think you'll have much of a choice.
Sent from my HTC6435LVW using xda app-developers app
I might pick one up...my Diztronic is starting to annoy me.
Curious to see how you guys like it...not sure i would like the glossy case exterior... but we'll see.
The dual pro cases are very good, had one for my Gnexus and other older phones before.
Mike
thunderbolt33 said:
Mind making a little review of the case for us? or just give us some insight about the case since you physically have it? Way better than looking at pictures.
Click to expand...
Click to collapse
I don't physically have it yet, supposed to arrive either late this week or early next, I will write a review once I have it.
Sent from my Droid DNA
I just received mine and I have to say it makes it look really nice, its still slim and keeps its curves while adding good protection (I got the grey/yellow one). The only complaint I have is that it is a little slick in the hand, but not too bad. I would take pictures but, I don't have my camera with me :/ would definitely recommend.
Here are pics of the Faxion case on my DNA. Overall the case fits very well. Power and volume buttons are a little hard to press, but that's really not the cases fault. I'm not to crazy about the glossy finish, it's a scratch/scuff magnet (all the pics on the Web did not show this glossy finish), I may have thought twice about buying this case and just gone with the dual pro. However, one of the main reasons I did go with the Faxion is it has a thinner profile than the dual pro, and it doesn't disappoint from that aspect. It doesn't add a lot of weight or extra to the phone, fits nicely in my size 34 jeans pocket The one thing I am completely disappointed about though is the screen protector provided by Incipio. You can see in the picture that because the screen on the DNA is curved on the edges, the protector doesn't stick all the way around for about a mm. I'll have to buy some replacements online.
Sent from my Droid DNA
blackstallion said:
Here are pics of the Faxion case on my DNA. Overall the case fits very well. Power and volume buttons are a little hard to press, but that's really not the cases fault. I'm not to crazy about the glossy finish, it's a scratch/scuff magnet (all the pics on the Web did not show this glossy finish), I may have thought twice about buying this case and just gone with the dual pro. However, one of the main reasons I did go with the Faxion is it has a thinner profile than the dual pro, and it doesn't disappoint from that aspect. It doesn't add a lot of weight or extra to the phone, fits nicely in my size 34 jeans pocket The one thing I am completely disappointed about though is the screen protector provided by Incipio. You can see in the picture that because the screen on the DNA is curved on the edges, the protector doesn't stick all the way around for about a mm. I'll have to buy some replacements online.
Sent from my Droid DNA
Click to expand...
Click to collapse
Actually the dual pro is suppose to be the exact same thickness (according to the specs on incipio's website) and the buttons are a ton easier to press in my opinion.
blackstallion said:
Here are pics of the Faxion case on my DNA. Overall the case fits very well. Power and volume buttons are a little hard to press, but that's really not the cases fault. I'm not to crazy about the glossy finish, it's a scratch/scuff magnet (all the pics on the Web did not show this glossy finish), I may have thought twice about buying this case and just gone with the dual pro. However, one of the main reasons I did go with the Faxion is it has a thinner profile than the dual pro, and it doesn't disappoint from that aspect. It doesn't add a lot of weight or extra to the phone, fits nicely in my size 34 jeans pocket The one thing I am completely disappointed about though is the screen protector provided by Incipio. You can see in the picture that because the screen on the DNA is curved on the edges, the protector doesn't stick all the way around for about a mm. I'll have to buy some replacements online.
Sent from my Droid DNA
Click to expand...
Click to collapse
Doesn't look too bad.... Thanks for the photos!
Sent from my HTC6435LVW using xda app-developers app
I just ordered a black one from amazon.
I was wondering if the white and grey one would get dirty fast?
JoeDroid said:
Actually the dual pro is suppose to be the exact same thickness (according to the specs on incipio's website) and the buttons are a ton easier to press in my opinion.
Click to expand...
Click to collapse
Here are the measurements from their site. The width and depth are a little less for the Faxion.
Faxion Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 2.90 in (73.66 mm)
Depth: 0.40 in (10.16 mm)
Weight: 1.3 oz
Dual Pro Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 3.00 in (76.20 mm)
Depth: 0.50 in (12.70 mm)
Weight: 1.3 oz
Sent from my Droid DNA
blackstallion said:
Here are the measurements from their site. The width and depth are a little less for the Faxion.
Faxion Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 2.90 in (73.66 mm)
Depth: 0.40 in (10.16 mm)
Weight: 1.3 oz
Dual Pro Measurements
Length: 5.70 in (144.78 mm)
Thickness: 0.08 in (2.03 mm)
Width: 3.00 in (76.20 mm)
Depth: 0.50 in (12.70 mm)
Weight: 1.3 oz
Sent from my Droid DNA
Click to expand...
Click to collapse
So they are the same thickness like he said....
One piece of warning regarding this case, the microusb charging cable doesn't work because the backshell on the microusb side of the cable that plugs into the phones charging port is to thick with the HTC provided cable. I had to use my wife's cable from her Samsung SG3 that has a thinner profile backshell.
Sent from my Droid DNA
Disregard my statement above regarding the microusb cable that comes with the phone, it does work just fine with this case. I was using a cable from another device I've had in the past and that's where I was having issues.
Sent from my Droid DNA
i received my dual pro today and its great as to be expected from a 2 part case (silicon, hard plastic) all the buttons are easy to hit unlike the otterbox i have and this case feels real nice in the hands the included screen protector feels cheap but dosent take away from the quality of the screen like most free protectors do, overall i'm very satisfied this is exactly what i've wanted since i got the phone.
I was wondering if anyone had tried the Belkin Qode 7" universal keyboard, part number F5L146eaBLK, which I stumbled on via Ebuyer
http://www.ebuyer.com/522252-belkin-qode-portable-keyboard-case-f5l146eablk
According to an Amazon listing, the dimensions are
242 x 188 x 30 mm
compared with the Z ultra at
179.4 x 92.2 x 6.5 mm
OK, so it's pretty thick, but that includes the flappy bit which holds the device and acts as a protective cover.
Sorry if this might have been answered already but what are the dimensions with the dual screen case mounted to it? I've searched online and found the dimensions of the phone were 159.3 x 75.8 x 8.4 mm (6.27 x 2.98 x 0.33 in) haven't seen nowhere it mentioned what the dimensions are with the case. Thanks!
Closed: 6.50 x 3.44 x 0.63
Open: 6.50 x 6.44 x 0.38
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
HDCowboy said:
Sorry if this might have been answered already but what are the dimensions with the dual screen case mounted to it? I've searched online and found the dimensions of the phone were 159.3 x 75.8 x 8.4 mm (6.27 x 2.98 x 0.33 in) haven't seen nowhere it mentioned what the dimensions are with the case. Thanks!
Click to expand...
Click to collapse
Sorry didnt quote you the first time.
To put that in perspective, it fits fine in my lose-fit jeans (male jeans). It is however very thick and somewhat hard to hold. If you have small hands, not a great idea. The weight however is perfectly fine. The dual screen adds almost no weight.
Kinanizer said:
To put that in perspective, it fits fine in my lose-fit jeans (male jeans). It is however very thick and somewhat hard to hold. If you have small hands, not a great idea. The weight however is perfectly fine. The dual screen adds almost no weight.
Click to expand...
Click to collapse
I wouldnt say it's hard to hold at all, but i dont have small hands. Its not any harder to handle than any other large phone. My note 10+ feels just the same when handling them one after the next. Without the dual screen case on the phone it feels rather small to me, and with it on feels "normal".