Has anybody been able to get the MMS working with Arcsoft on the Telus network?
does telus offer mms? if not try nuemms, mms over email
ya telus does offer sms.. but dunno how to get it to work.
same problem here mate.
what software does Telus use for MMS in it's stock ROM? If it's arcsoft, then I'd like to take a stab at helping get it working for you guys... i use Verizon but i am getting pretty good at getting Arcsoft to work for me.... What I need is your HKLM/Software/Arcsoft registry export from someone who is using the stock ROM and then the same thing from someone trying to get either Arcsoft 4.2.8.1 or the newer 5.XXX to work....
azclown said:
what software does Telus use for MMS in it's stock ROM?
Click to expand...
Click to collapse
Telus does not offer MMS for its WM phones.
So whos MMS servers are you using??
azclown said:
So whos MMS servers are you using??
Click to expand...
Click to collapse
We, on WM Telus phones, are not using any MMS servers. No ROM build for a Telus WM phone has offered MMS support and there remains no indication that Telus will.
I remember people having tried to hack MMS into WM through to Telus, but to no avail. It appears that Telus' business model is to segregate defined devices to specific features of its network. The locked mentatlity at Telus tends to treat WM devices more for business and data (web/email) than for a younger target who're motivated for text/photo messenging. I'm guessing a bit by what is not available and apparently locked out on the network.
That's the we way it appears to be. We can try to find the direct servers to see if it may work, but so far none that I know of have accomplished sending such messages on WM devices. Your network ID is associated to the model of phone that you have...
this really shouldn't be such a difficult task... i know it's been attempted many times before by many people but shouldn't we be able to just get the servers and other settings from a non-WM device that has functional MMS on Telus?
The only other issue I can think of is that i i recall correctly, Telus handles MMS in a different way than most other carriers. The last time I had a non-WM handset on Telus, MMS messages were handled via a text message with a link to a wireless web page where i could retrieve the message. It was a total PITA. Unless Telus has changed their network model for MMS, it won't be easy.
Everithing Work fine for me....
My MMS setting is to Telus MMS Network... If you wanna know how it work go on the telus site : http://www.telusmobility.com/clientcare/pcs_east/faqs/picture_messaging_faqs.shtml
It's cost about 25cent for a picture MMS and 50 cents for a videoMMS...
Wich it will help... Do you let's the custumization run at first boot And the Major question wath ROM are you running ...
So good luck
Alex_electro said:
My MMS setting is to Telus MMS Network... If you wanna know how it work go on the telus site : http://www.telusmobility.com/clientcare/pcs_east/faqs/picture_messaging_faqs.shtml
It's cost about 25cent for a picture MMS and 50 cents for a videoMMS...
Wich it will help... Do you let's the custumization run at first boot And the Major question wath ROM are you running ...
So good luck
Click to expand...
Click to collapse
How exactly did you get MMS to work on Telus?
I havew mannaged to get half of it working... sending messages, here's the thread with full instructions
http://forum.xda-developers.com/showthread.php?t=392284
To get MMS to work on Telus, the following must exist in your registry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"Domain"=""
"EnableRemoveCountryCode"=dword:00000000
"EnableSaveAudioObject"=dword:00000001
"FlixSlideCountLimit"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Telus MMS]
"WAP1RecvDefaultSize"=dword:19000
"WAP1SendDefaultSize"=dword:19000
"PacketSize"=dword:3E8
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"WAP2SendDefaultSize"=dword:4B000
"WAP2RecvDefaultSize"=dword:FA000
"WAPType"=dword:1
"GatewayPort"=dword:50
"MmscURI"="http://mms.telusmobility.com/servlets/mms"
"Gateway"=""
"Name"="Telus MMS"
"ISP"="Telus MMS"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Telus MMS"
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"Accept"="*/*"
"User-Agent"="Titan"
"Profile"="http://www.htcmms.com.tw/gen/Titan-1.0.xml"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2"
"Accept-Language"="en"
Also as stated in other threads regarding MMS on different carriers, you must add the following string to HKLM\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader
Code:
"X-Telus-MDN"="your 10 digit phone number"
gcincotta said:
To get MMS to work on Telus, the following must exist in your registry:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\UI]
"Domain"=""
"EnableRemoveCountryCode"=dword:00000000
"EnableSaveAudioObject"=dword:00000001
"FlixSlideCountLimit"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\Telus MMS]
"WAP1RecvDefaultSize"=dword:19000
"WAP1SendDefaultSize"=dword:19000
"PacketSize"=dword:3E8
"ConnectionVia"="{436EF144-B4FB-4863-A041-8F905A62C572}"
"WAP2SendDefaultSize"=dword:4B000
"WAP2RecvDefaultSize"=dword:FA000
"WAPType"=dword:1
"GatewayPort"=dword:50
"MmscURI"="http://mms.telusmobility.com/servlets/mms"
"Gateway"=""
"Name"="Telus MMS"
"ISP"="Telus MMS"
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1]
"DefaultSetting"="Telus MMS"
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"Accept"="*/*"
"User-Agent"="Titan"
"Profile"="http://www.htcmms.com.tw/gen/Titan-1.0.xml"
"Accept-Charset"="us-ascii;utf-8;iso-10646-ucs-2"
"Accept-Language"="en"
Also as stated in other threads regarding MMS on different carriers, you must add the following string to HKLM\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader
Code:
"X-Telus-MDN"="your 10 digit phone number"
Click to expand...
Click to collapse
These settings do not work at all on the Telus network
These settings do not work at all on the Telus network
Click to expand...
Click to collapse
These settings were taken DIRECTLY from the Telus carrier OEM in dcd's 3.0.4 kitchen.
gcincotta said:
These settings were taken DIRECTLY from the Telus carrier OEM in dcd's 3.0.4 kitchen.
Click to expand...
Click to collapse
That's nice, but that doesn't change the fact that they don't work. I'm on the Telus network, Telus has tried to disable picture messaging entirely on their PDA/smart phones. My solution that I posted works, at least for sending... I would really appreciate it if you coulld help me with it, because I'd like to beat Telus and be able to send messages as well.
Here's the post I mentioned http://forum.xda-developers.com/showthread.php?t=392284 .... I haven't been able to duplicate my results on arcsoft though
gcincotta said:
These settings were taken DIRECTLY from the Telus carrier OEM in dcd's 3.0.4 kitchen.
Click to expand...
Click to collapse
MMS didn't work in DCD 3.0.4... I should know, I tried to help him problem solve it. I believe the last piece to the puzzle, is missing header info.
MMS didn't work in DCD 3.0.4... I should know, I tried to help him problem solve it. I believe the last piece to the puzzle, is missing header info.
Click to expand...
Click to collapse
I really don't know what to tell you then as I'm not on Telus and know nothing about the status of their MMS.
Juicy47 said:
MMS didn't work in DCD 3.0.4... I should know, I tried to help him problem solve it. I believe the last piece to the puzzle, is missing header info.
Click to expand...
Click to collapse
I could use your help, dcd also shown interest in my thread... check it out please http://forum.xda-developers.com/showthread.php?t=392284
KazW said:
I could use your help, dcd also shown interest in my thread... check it out please http://forum.xda-developers.com/showthread.php?t=392284
Click to expand...
Click to collapse
KazW, I'm glad to see the work you've done... but I'm afraid the results of my best efforts can be found in DCD's 3.0.4 Telus Carrier settings (which don't work)
Juicy47 said:
KazW, I'm glad to see the work you've done... but I'm afraid the results of my best efforts can be found in DCD's 3.0.4 Telus Carrier settings (which don't work)
Click to expand...
Click to collapse
I'm well aware of your best results, you've managed to get arcsoft talking to the telus servers, I haven't for some reason, I believe that if you use the two addresses I list on the page that you maybe able to at least match my results, possibly go further... But I do doubt we'll be able to receive picture messages with telus
Also it'd be much better than my solution because the UI of the application doesn't quite "feel" as nice as arcsoft's.
vx6800 flashed 1st time and all seems to be great. Very slick work and love WM6.1 wiith all the features vendor disabled like ICS.
After a day of running it without problems, i noticed i did not recieve a pic from a friend. looking, i dont even have MMS pics as an option. anyone know how i can get this feature back?
Add New only lets me setup a new email and not MMS pics. Thought about redoing the verizon cab, but would that mean getting a verizon tech to reactivate the unit onto the network again? Any other ideas, help?
Install Arcsoft MMS
Figured MMS support was part of WM6. But will look into a 3rd party solution. Any special connection settings required for the vendor or type of traffic since MMS is billed diffrent than a data connection?
Figured MMS support was part of WM6. But will look into a 3rd party solution. Any special connection settings required for the vendor or type of traffic since MMS is billed diffrent than a data connection?
Click to expand...
Click to collapse
Arcsoft MMS isn't third party, it is what is included in all Windows Mobile MMS solutions. It's just been removed from the rom, you need to add it back.
Little searching goes a long way...
http://forum.xda-developers.com/showpost.php?p=2220029&postcount=6
I'm a new owner of the 6800. I flashed it using DCD's 3.2 and I'm using the 3.42.30 radio. Regular SMS texting works fine, but I cannot receive or send MMS.
When I go to the MMS section configuration on the PDA it shows Sprint being a profile for settings, but it will not let me hit the new button.
I ended up finding the "dcd VZW Arcsoft MMS 5.0.31.19.cab" mentioned on the forums here, so I installed it and did a soft reset, but it did not seem to affect things at all.
Any suggestions on what I could try next?
Thanks =)
Go to this thread
Follow the instructions and be sure to uninstall the DCD .cab and check the registry afterward to be sure that it was completely removed. Once you are sure that all previous instances of MMS are removed then install the new cab from the post above. http://forum.xda-developers.com/showthread.php?t=404345
spinaldex said:
I'm a new owner of the 6800. I flashed it using DCD's 3.2 and I'm using the 3.42.30 radio. Regular SMS texting works fine, but I cannot receive or send MMS.
When I go to the MMS section configuration on the PDA it shows Sprint being a profile for settings, but it will not let me hit the new button.
I ended up finding the "dcd VZW Arcsoft MMS 5.0.31.19.cab" mentioned on the forums here, so I installed it and did a soft reset, but it did not seem to affect things at all.
Any suggestions on what I could try next?
Thanks =)
Click to expand...
Click to collapse
How did you flash the radio? I suspect you used the official Sprint Upgrade, AND you let the customizations run..... Is this correct?
You rock! Worked first try. Thanks so much!
I downloaded and installed the GC Arcsoft MMS 5.0.70.24 for VZW but i can't get my phone to send or receive pictures. Does anybody know the server info to enter or what i need to do to get it to work?
Be sure your 10 digit phone number(##########) is in the following registry entry:
HKLM\Software\Arcsoft\ArcsoftMMS UA\Config\mm1\WspHeader\X-VzW-MDN
I followed it all the way to WspHeader and i couldnt find X-VzW-MDN.
do you have a data plan ?
do you have a carrier installed?
Yeah i do, my internet is working and everything.
Having the same problem. Everything else is working fine.
tree20002 said:
I downloaded and installed the GC Arcsoft MMS 5.0.70.24 for VZW but i can't get my phone to send or receive pictures. Does anybody know the server info to enter or what i need to do to get it to work?
Click to expand...
Click to collapse
I've had this problem for months. I wasn't able to get it to work so I finally just gave up on sending and receiving pictures. I installed WM 6.5 built 21159 - Beta 5 ROM the other day and tried to send pics again, but still nothing. It really sucks.
His arcsoft cab has a setup DLL that reads the MDN from the registry and puts it into that key for arcsoft.... If you installed the carrier cab after the MMS cab then that would explain why its not there.... I'd hard reset, then install the carrier cab, then reboot, then install the arcsoft cab.... I have had to install the mms cab twice before it worked right.....
GeLopez said:
do you have a data plan ?
do you have a carrier installed?
Click to expand...
Click to collapse
Is a data plan required for pix messages?
ibenjakinov said:
Is a data plan required for pix messages?
Click to expand...
Click to collapse
some kind of plan is required so you can actually receive a connection from the data network. you can get a pay as you go plan, but especially with WM phones this is a really bad idea because you can rack up alot of usage really quickly. if you dont have a data plan than you wouldnt be able to connect anny app to the internet
I got it to work. Just make sure you install the carrier cab first then the MMS cab. you might have to reinstall the MMS cab a couple of times, but it should work.
I am having this problem too. After installing the MMS button does not show up in messaging when sending media.
So i upgraded to win 6.1 then 6.5.
Seeing how it was my first time doing it, i let sprints custom run on 6.1 and now i can not send sms.
Does anyone have a stock 6800 on uscc that i could get the epst settings from ?
I have double checked all of my epst settings but still cant send sms.. I can call out/receive get online and got the gps working but no sms.
using radio 3.42.50
and win 6.5 build 21820 Sprint Mattsm
with the dcd USCC Carrier 20080801 Cab
After searching three different forum.. i wonder if it could be due to the fact i have no value for my a-key in epst ? any idea how to get one ?
so just fyi for others if this happens.. EPIC FAIL !! .. i did not have my SMS turned on for that line, it was my business phone and had forgot to i had uscc disable txt messing on the line.
Woot ! go me after like 4 hours of researching !