Hello,
Has anyone tried the Body Glove case?
http://www.bodyglove.com/store/products_detail.php?product_id=30716&zip=19116&Go.x=15&Go.y=13&Go=Go
It's $30, but do you guys think it's worth it?
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
sooperxtool said:
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
Click to expand...
Click to collapse
Wouldnt that case cover the proximity sensor???
I have been using it for about 1.5 weeks with my Tmob TP2. The bottom cover is a little tricky, but it works pretty good. I took the back clip off and put the plug in. I mainly keep it in my shirt or my pants pocket.
Got one today
I got one today and is does seem pretty sturdy. It has the feeling of soft leather or neoprene over hard plastic covering most of the edges and then a mesh on the sides for griping. as one person mentioned you have have the clip on or off which is nice. It does seem really bulky when I have it clipped in the inside of my front jeans pocket. I'm still trying to decide if I want to keep it or get something else but I do think it is pretty nice.
1buprofen
bimori said:
Wouldnt that case cover the proximity sensor???
Click to expand...
Click to collapse
It looks like it will, so a little drilling might be required. I have one coming in the mail, so I'll let you know if it does.
I saw this case at my local T-Mobile store. It was too bulky and interfered too much with the number keys when the screen was flipped up. T-Mobile sales a really nice soft gel like shell with all the right holes cut out for the T-Mobile version of the TP2 (including one for the proximity sensor). It costs about $12 +/-.
sooperxtool said:
this case can be found easily on ebay for 17.99 with free shipping
ill let everyone know what its like when i get it
Click to expand...
Click to collapse
Best part it's in NJ, very close to me
When you say "It was too bulky and interfered too much with the number keys when the screen was flipped up" do you mean its got a cover that protects the screen too?
Yes. It's the same type as the BodyGlove, but without the clip, feels more rubbery, and isn't quite as thick. It still gets in the way of the number keys when tilting the screen, but not as much since it's a little thinner. I can actually still use the number keys with this case, where as with the bodyglove I couldn't.
DeDBlanK said:
I have been using it for about 1.5 weeks with my Tmob TP2. The bottom cover is a little tricky, but it works pretty good. I took the back clip off and put the plug in. I mainly keep it in my shirt or my pants pocket.
Click to expand...
Click to collapse
You will def have to drill a little for the proximity sensor, but other than that, it fits really well, and gives a little better grip. It does make the phone a little thicker, but it protects it well.
dasher said:
I saw this case at my local T-Mobile store. It was too bulky and interfered too much with the number keys when the screen was flipped up. T-Mobile sales a really nice soft gel like shell with all the right holes cut out for the T-Mobile version of the TP2 (including one for the proximity sensor). It costs about $12 +/-.
Click to expand...
Click to collapse
Is this the soft gel case that the T-Mobile store sells?
http://cgi.ebay.com/for-HTC-TOUCH-PRO2-GSM-T-MOBILE-OEM-GEL-SKIN-CASE_W0QQitemZ350242545193QQcmdZViewItemQQptZPDA_Accessories?hash=item518c151e29&_trksid=p3286.c0.m14
If not, have you seen it sold anywhere online?
Yes, that's the one.
I just bought the t-mobile soft gel case for my touch pro 2 and it fits pretty well, Doesn't block the proximity sensor. So for the price , 12.99 + tax, I recomend it.
Glad it worked out for you. I've had the case for over a week now and love it!
Updated BodyGlove Case Coming Soon!
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
As for the thinner GEL type case, I tried it today and didn't like it as much as the BG version since it seemed to be easy to dislodge the the lower shell middle clips. Within a few minutes I noticed that I had to bump the center clips back in place more than once. It also seemed to interfere with the slide a little, something the BG does not do.
I would have to vote for the BG (updated one) as the better case since the rigid shell fits and stays on better. Yes, the BG is a little bulkier but I would have to guess that it would provide pretty good protection in the event of gravity assisted boo-boo.
Regards,
Gordo
Body Glove in a cradle.
I love my BG case. I got it a couple of days ago. All I had to do was drill a small hole for the proximity sensor, which btw is an easy fix. I wonder if there is a cradle that will fit it now that it's a lot thicker.
I think I'd have a better luck making my own. I think a triangular wedge with a lip/edge on one the sides would work best since I'm planning to have the keyboard open while it's charging. I'll post pics (probably on a different thread). What do you guys think?
jetjockgordo said:
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
As for the thinner GEL type case, I tried it today and didn't like it as much as the BG version since it seemed to be easy to dislodge the the lower shell middle clips. Within a few minutes I noticed that I had to bump the center clips back in place more than once. It also seemed to interfere with the slide a little, something the BG does not do.
I would have to vote for the BG (updated one) as the better case since the rigid shell fits and stays on better. Yes, the BG is a little bulkier but I would have to guess that it would provide pretty good protection in the event of gravity assisted boo-boo.
Regards,
Gordo
Click to expand...
Click to collapse
็็ำัHey there!
Don't forget to put the new one on eBay with WORLDWIDE SHIPPING !!!
(or at least Australia)
Cheers!
jetjockgordo said:
I have been working with BodyGlove on a redesign of the TP2 case and I will be getting a factory prototype in the next week to ten days. From what I am told the main difference is it will have the cutout for the proximity sensor.
Make sure you keep your receipt. I would guess that T-Mobile will replace it with the updated version since the original was technically defective. If you have trouble with T-Mo then contact BodyGlove directly since they know about the problem and are coming out with a fix.
Regards,
Gordo
Click to expand...
Click to collapse
I emailed BG about this the other day and they couldn't tell if this was a mistake, a bad batch, or what... so they said they would send me a new one to see if it was better (this was before i saw your thread).
Also, there is a hole on the BACK cover that the BG case blocks, but the gel of same type don't. Someone said it was a noise mic. (I don't know).
For those of you that drilled... was it hard to keep the material from wanting to tear or fray? How did you go about it?
etro
etropic said:
I emailed BG about this the other day and they couldn't tell if this was a mistake, a bad batch, or what... so they said they would send me a new one to see if it was better (this was before i saw your thread).
Also, there is a hole on the BACK cover that the BG case blocks, but the gel of same type don't. Someone said it was a noise mic. (I don't know).
For those of you that drilled... was it hard to keep the material from wanting to tear or fray? How did you go about it?
etro
Click to expand...
Click to collapse
It wasn't hard at all. I just got a small drillbit and I used a dremel tool. You can't even tell that I "modified" it.
Related
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
I don't bite
Alik4041 said:
I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened.
Click to expand...
Click to collapse
It was 2000 the first time I experienced that. It was a palm m500 and a little piece of dust got on the tip of my stylus. I didn't hear it so much as I felt the friction, but my reaction was much the same. I haven't gone without a screen protector since.
As to the included screen protector, use it if it works for you, but you'll typically find better durability in popular protectors like the boxwaves you linked to or clarivues. The clarivue that I put on my Palm TX in 2005 is still on it, and still looks good.
The thing I worry about with a lot of those no name brand cases on ebay is how well do they really fit? The last thing you want is to have them falling off. I don't know if my fear is well-founded or not, but I didn't really want to gamble on it. But as far as TMo goes, I'm not sure what to tell you. Boxwave actually has a pretty cool soft case called the praetorian crystal slip, but not for the TMo version. Seidio seems like a nice quality joint, but they don't seem to make their innocase for the TMo version either.
Edit: I suppose you could check this thread out.
I had the acrylic case with screen protector and I removed it shortly after purchasing. The porblem I had is that the screen protector is superficial and although it works sometimes when I typed certain virtual keys another part of the screen protector would also bend down on my press and caused for a different near by character to be pressed. Eventually I got rid of it and just purchased a seperate screen protector.
I really am looking for quality though for a case, just want something that's not too big or will not hinder usage of the phone. I've heard a lot about the ghost armoring and all. I'm considering it, but that will not save a phone from a fall or anything like that.
Consider an all-body protector (such as zagg or bodyguardz), combined with a pouch or holster case that you remove the device from to use it.
This is my preferred method, so my TP2 is well protected when it's not in use, and I'm completely unhindered when I am using it (but still with scratch protection).
Note that the protectors need to be applied very slowly and carefully to make sure they're lined up well and properly stuck down around the edges.
Alik4041 said:
Hi, this is my first thread so far I've been doing a lot of research about my phone, figured it was a good deal, and purchased the Tmobile version. I've been looking for a case even before I bought it, but it seems there isn't a perfect case out there simply because of the sliding keyboard. Well I was just using my TP2 about an hour ago and as I was using the stylus to scroll down in opera, I heard "SCRAPE!" ...my ears said "WTF!?!?! NO!!!!" and i quickly realized what had just happened. Never thought it was possible but whatever. Anyways, I've had the phone for 6 days or so and I plan to exchange it tomorrow.
This has definitely motivated me to find a case and screen protector and end the headache. So I've came up with the following from reading some threads the past hour, but I want to be sure before I order. So far I have this case
http://cgi.ebay.com/Clear-Hard-Skin...wItemQQptZPDA_Accessories?hash=item45ef91bf67
and these screen protector (boxwave Crystal or Anti-glare)
Crystal
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
Anti-glare
http://www.boxwave.com/products/cleartouch/cleartouch-screen-protector-t-mobile-touch-pro2_3668.htm
I'm still searching as I don't want to purchase something and regret it, but let me know what you guys think. I've heard good things about the plastic case, but overall I'm looking for quality, but no more than $45 for case. Much appreciated
EDIT: DID NOT KNOW THERE WAS A SCREEN PROTECTOR IN THE BOX
Click to expand...
Click to collapse
I have the same clear hard plastic case and absolutely love it. I've tried the body glove case, and had some issues with sliding the keyboard in and out. I just use the screen protector that came with the phone, and the clear hard plastic case. No problems at all, though I still have to take the case off every once in a while to clean it, but you'd have to do that with any case really. Get a lot of compliments on it.
dougstoner said:
I have the same clear hard plastic case and absolutely love it...
Click to expand...
Click to collapse
Does it add much bulk...???
da9th_one said:
Does it add much bulk...???
Click to expand...
Click to collapse
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
dougstoner said:
It really doesn't add much bulk at all. I did have the body glove case, and it definitely added a lot of bulk. I keep my phone in my pocket now, but it's def worth the buy.
Click to expand...
Click to collapse
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
I just ordered some phantom skinz, I'll report back when they get here.
liht said:
So it fits alright eh? The bodyglove one didn't seem to snap on correctly, and all the other ones I've seen fit so tight that it tends to seperate the screen portion from the keyboard portion...no issues with fitment for the tmobile version? Can you post a picture of how it looks with the clear case?
Click to expand...
Click to collapse
I think it fits better than the body glove case. Plus, it looks way better. I've had mine for a while now with no problems. Even take it off a bit to clean it up, and no issues. Check my old thread out...Have pics on post #5.
http://forum.xda-developers.com/showthread.php?t=578050&highlight=clear+hard+case
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Thanks for the review! I bought the same case a few months ago, although it was advertised as for the Verizon Touch Pro 2. I was unaware they made one for the Tilt 2. Now I won't have to worry about it falling off randomly!
thsi case probably wouldnt work with invisible shield on too huh
Doinshots said:
This is my first review, so I hope it doesn't suck.
Both my wife and I have the Tilt 2. I decided to go with InvisibleShield while she wanted a case. After looking at all the comments here about cases not fitting, I decided to go with 2 different ones from Amazon. One fit horribly, so i wont even mention it.
She is using the Tilt2 Praetorian Slip and she loves it. Installation was a little tough as the fit is pretty precise. I suggest installing the top (screen) side first and then the bottom (keyboard). Install both with the KB extended. I have attached pics of the fit.
The only complaint I have (she thinks of it as a feature) is that the cover makes it a little more difficult to slide out the keyboard. She like it because it used to slide open in her purse (mostly because of the fact that she keeps it in an inside pocket of her purse which causes it to hit just right against crap she has in another pocket). Overall, this is a pretty nice cover. I am sure you can get it cheaper than amazon, but I had gift certificates to spend
Hope this helps!
Click to expand...
Click to collapse
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
JJHiemenz said:
Neat.. glad yours fit. I ordered one for the Tilt2 from Amazon as well, and Boxwave sent one labeled 'Touch Pro 2'. I see yours doesn't have a cutout area for the PTT button either, do you have issues with that? My praetorian case would almost always trigger the PTT button whenever I handled the phone.
The top/screen portion of my Praetorian didn't fit right and opening and closing the top was almost impossible - even ended up ripping off the protective plastic along one side of the keyboard. (the protective plastic that is designed to be there, not the temporary stuff it whipped with) I can see just by looking at your pictures that your screen portion fits waay better than mine did.
When I contacted Boxwave about the issues, no questions asked and they sent a postage paid label for the return. I'd love to try this case again, as I did like the feel of it, but nervous about another no-fit. I went with BodyGuardz instead.. not sure I'm happy with those..
Click to expand...
Click to collapse
Man, sorry you had so many issues. The PTT button is indeed covered, but she has had no issues with it at all (hers is remapped to toggle bluetooth on and off). The fit on the screen portion is *very* tight. Took some effort to get it installed properly.
Also, mine definitely said "Tilt 2" on the packaging.
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
sleze said:
It is disappointing that it covers the PTT button. I assume your wife has abandoned that function (easily switching BT on/off)?
Click to expand...
Click to collapse
Nope, the PTT button still works perfectly under the cover. Does not get accidentally pressed and is responsive when you push it.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
Sounds like skinning/shielding your phone with GadgetShieldz might be the way to go. The GadgetShieldz does take a little time to install but it works. The protective film on the screen is easy to install and bubble free. It makes the phone non-slippery. It would not protect the phone like a case but it does prevent scratches. When installed, it adds very little weight and dimension to the phone.
Actually, there are other protective films/shields but I only have experience with GadgetShieldZ. It might work for you.
Boxwave Praetorian Crystal Slip for Tilt 2
orb3000 said:
Thanks,
I´ll include it on the main thread
http://forum.xda-developers.com/showthread.php?t=524059
Click to expand...
Click to collapse
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
azwildcat98 said:
Thanks for posting reviews on this case -- I'm trying to decide what route to take to give my new Tilt 2 some added protection, and more importantly, cut down on the slickness/smudge magnet-ness of the shiny battery cover (which is my #1 gripe with the GSM TP2, both CDMA versions have rubberized covers which won't fit their GSM siblings due to the placement of the 3.5 mm jack).
I really wish someone made a rubberized battery cover to replace the shiny OEM one. These snap on type cases are okay, but they become a major pain as soon as you need to pop off the battery cover in order to flash a new ROM (as I do often), reset the device, or swap out memory cards. I worry trying to snap-in and pry off these cases frequently will damage the phone -- especially when it's a super snug fit. IMHO, a rubberized battery cover, along with perhaps the upper portion of this case to protect the chrome bezel from getting nicked would be an ideal solution! I may just go down to Home Depot this weekend and see if they have a spray that can rubberize plastic, then I might just buy a spare OEM battery cover and see if I can rubberize it.
Click to expand...
Click to collapse
I wish I'd seen your post sooner! Home Depot and Lowe's does indeed have something like that. I'm sure lots of hardware stores do. It's called Plasti-Dip. I have a can right here You can buy it as spray-on or dip/brush-on applications. I use it on mountain bike parts and tools for extra grip. I'm not positive how well it will stick to a slick plastic surface but it is an option.
BluEyedTiger said:
Just to report on this, I got one of these in the mail yesterday. So far I love it. It wasn't terribly difficult to get on. It fits very well too. My only real complaint is that it doesn't accommodate the PTT button that the Tilt 2 has right next to the volume buttons. It's not a big issue since I don't use PTT and the case doesn't prohibit using the key anyway.
Just be careful and make sure you order the one that specifically says it's for the Tilt 2. They make other models. I know they have the Praetorian on eBay but to be safe I opted to get mine directly from Boxwave. I got what I ordered too and could have used they're return policy if I needed.
Oh...I'll be happy to post pics if anyone wants but I think someone already put some up of this one a Tilt2.
Click to expand...
Click to collapse
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
BehindTheLight said:
Hey man, I'm thinking about ordering this case and I wanted to see if you still like it and how it has held up over the past month. Thanks.
Click to expand...
Click to collapse
It's held up quiet nice...even with as much flashing I do (have to remove the bottom piece every time). I've figured out a great way to put it back on that's really fast and easy. Some people say it's difficult to get on. I think the top piece is the hard part but I've taken it off a few times and have no issues there either. It still fits good. If I remember, next time I take it off I'll shoot some pics of how I put it on and upload them.
Learic said:
I ordered one from BoxWave and I think I'm still going to shop around for something else. It seems like the Tilt2 has less options than the other variations of the Rhodium so people may just be settling for this due to "Slim Pickin's."
I like the way the gel gives more texture and grip to the phone, but I still feel uneasy because it's definitely not a snug fit. The part that covers the screen section of the phone is very flimsy and after you get it on, you want to keep checking it to make sure that it is attached; it feels like it can easily slip off at any time. This is specifically evident when you slide your screen up and tilt it. Tap the top right, or the middle section that really has no grip around the phone, and it might just pop off...
I still have it on my phone because it is the lesser of two evils, have something vs. not having something, but are there any other options for the Tilt2?
Click to expand...
Click to collapse
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
BluEyedTiger said:
I haven't really had any trouble with mine popping off. It took a bit to get the top on right and it was a pretty snug fit too. Getting the corner edges all the way tucked under was the hardest part. I'm guessing it's a manufacturing thing. Some say it's a tight fit and other say it's loose. I will agree that the sides on the top piece are flimsy because they're not attached the the phone but if they were it would probably make matters worse by either rubbing against the bottom piece or creating too big of a gap between the two parts of the phone.
I agree there aren't many options for the Tilt 2 and I hate to say it but there probably won't be.
Click to expand...
Click to collapse
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Learic said:
If yours is a snug fit, I wonder if we received the same thing! Did you order from BoxWave? I have a little plastic tool that I used to get the corners onto the top half quickly which was actually made to fit into the creavice of a HTC Dash phone to pop the clips and take the phone apart. It works great and I can see the little flaps around the corner so you can tell the corners of the phone are between the gel lips.. It's still too easy to come off though..
Even though my receipt says "Praetorian Crystal Slip, HTC Tilt2, Smoke Grey - SKU: bw-268-3729-2808", it also says "ITEM: HTC TOUCH PRO2." The Box also has a white sticker in the top right that says "Praetorian Crystal Slip - TOUCH PRO2."
Do you remember if yours said the same? Maybe they somehow shipped me the wrong one?
Click to expand...
Click to collapse
Yeah I got mine directly from boxwave. They have like 3 different models of that slip. Most of the adds I saw on Amazon and eBay claimed it would fit on 3 or 4 different TP2 models which I knew it wouldn't. I emailed boxwave about the pics in their online catalog because it didn't look like a Tilt 2 to me and they admitted it wasn't. They said they didn't have one for the pics. Which made sense I mean why spend that much just to get pics but they promised it would fit so I figured what the hell. The hard covers kinda suck.
Thanks for the replies, I guess I will go ahead and order it and see what happens.
I just got the unbranded version of this case off ebay (the seller's id was e-story).
It's not too bad on my unbranded TP2. It's slightly more difficult to slide out the keyboard, and when the screen is fully tilted, the top row of keys are slightly obscured, but nothing too major in my opinion.
I like that the case improves the grip of the phone, but I'm also rather concerned that the case will eventually melt under hotter conditions since the material feels rather gummy.
I was searching around and could not find a gel/TPU type clear case for the G1...for those of you who do not know...here is one example of a Nexus One case like what I would want:
http://cgi.ebay.com/2-Soft-Case-TPU...t=LH_DefaultDomain_0&var=&hash=item746a91e417
I know they do not show a completely clear one, but that is the material/type of case I would like. It is not like a typical silicone case -it is slightly like a hard case being that it does not bend as easily and it is not floppy at all.
Any ideas?
Heres the problem that I see...
How would you open the keyboard with that cover overlapping the front of the phone? That would probably be the reason those style covers don't exist for the G1.
As my fellow Oregonian said.. Soft cases and a slide keyboard won't really work.. If you look at the hard shells you'll see how the screen has it's own little part that clips on.. soft shells wrap instead of clip on...
I fail to see why they could not have a separate piece to put on the screen...?
If there is no such case... then could someone recommend a thin, yet tough, hard case? (preferably clear)
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Kemekill Products said:
soft cases can't clip onto the screen part that has to slide up...
but here's something i found with decent reviews for the other colors.. clear hasn't been rated yet
T-Mobile-Pure-Crystal-Slip-Clear/dp/B002BVMSPG/ref=sr_1_3?ie=UTF8&s=wireless&qid=1274392674&sr=1-3
Click to expand...
Click to collapse
Yeah I understand what you mean and thanks for that info...but - I was thinking not of a soft case 'clipping' onto the screen but you could slip a cover over it or around it -I am SURE there is some way to do it....
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
SolemnWishing said:
I think this is what you are looking for:
http://cgi.ebay.com/Soft-Silicone-S...Accessories&hash=item1c0cb6b513#ht_3496wt_980
Click to expand...
Click to collapse
LOL WOW THANK YOU!!!! How did you find that ? it should not be labeled as silicone (I think)..... wow that is exactly what I am looking for! I knew it was possible.... any way - I wish it didnt cost so much, the others I see like it(on other phones) is significantly cheaper (like under $5.00 with shipping included).... If I cannot find any cheaper ones I will order that one...
Thanks again, I cant believe you found just what I was looking for...
SolemnWishing said:
I think this is what you are looking for:
QUOTE]
Thank you as well. Been looking for one just like that.
Click to expand...
Click to collapse
yea that case is rocking . I as well was looking for something like this! Thanks!! hey erebusting did you order it? did ya like it?
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
erebusting said:
I ordered the clear one, and it came in yellowish like it was old or like someone was smoking around it or something.... the seller gave me a refund because he said they had no more, but I think that all the clear ones were just as yellow ? who knows....
also when you hold the phone in portrait mode on the top right and left corners of the keyboard section the case left a small gap on each side maybe about 1-2 millimeters as if it was slipping off...
Other than all that I liked it, but would not use it because it makes my phone look yellow / ugly... if I had a case like that with these flaws fixed then I would use it.
Click to expand...
Click to collapse
LMAO...Reading this was funny for some reason
Can you post some pictures? And would you recommend it? I am looking for a new case for my phone, and this one is one that I am considering
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
zinite said:
I had this case. I had a screen protector on, and the extra height of the screen protector made the screen portion of the case slip off. If you don't use a screen protector, it might work for you. I bought a Seidio case and never looked back. Super thin, rugged plastic. Comes in black so it blends into the phone.
Click to expand...
Click to collapse
zinite, I understand that, but see I do also have a screen protector on but the section of the case which goes on the screen is fitting fine, the section for the body is the part I have the complaint about. I will definately check out some Seidio cases now that you have mentioned that.
SolemnWishing, Here are some pictures of the case next to a clear hard case (which is actually clear and not yellow...)
Ace42, glad you got a laugh! haha...BTW I am wondering why you were laughing though, kind of odd to me ATM...
WOW! that case is really yellow. i was thinking about getting one thinking it wont be that yellow. but that is definitely gross smoker yellow
Dang... it looks like someone left that out in the sun for like a year or something..
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
mattv888 said:
Guess you know what happens to these cases when you have em for awhile... I've long given up on G1 cases: with a simple screen protector you should be on your way. I love the feel of the back of the G1, and a case would only screw that up.
Click to expand...
Click to collapse
I also love the feelings of the G1 without a case, but I have dropped my previous phones too many times to take that chance... haha
Any ways... Those pictures are from the same day of receiving that case, so it must be some fault on the seller....
its really a disappointment since there are no other cases (that I can find that is) like that for the G1...
any other recommendations/ideas?
Ok, so I'm a tweaker. I'm constantly messing with my phone: installing new apps, flashing ROMs, stuff like that. So, with all my tweaking, I freaquently have to perform manual soft-resets (eg pushing the red button).
Obviously, to do so, I have to remove the back cover. With the case I have now, though, it is a royal pain to do that!!
Is there a rubber case for the tilt 2?
Regards
Smith
I'm really considering drilling a hole through the battery cover and a matching one in my crystal case to perform resets without removing anything. I will do it carefully with a dremel, just an idea.
thats a pretty good idea, but then i would have to buy another back for my phone for warranty purposes :/
i really want a rubber case lol im gonna search harder!!
considering???
neoxatax said:
I'm really considering drilling a hole through the battery cover and a matching one in my crystal case to perform resets without removing anything. I will do it carefully with a dremel, just an idea.
Click to expand...
Click to collapse
Hell, I went ahead and drilled away, just be careful with the Tilt 2 since the hole needs to be quite close to the edge of the back to be of any use. Sooooo much easier though....
have a look at this guide.
Hope it helps.
orb3000 said:
have a look at this guide.
Hope it helps.
Click to expand...
Click to collapse
Those are really nice and I want one, but they're expensive
Just bought this one:
http://cgi.ebay.com/HARD-RUBBER-CASE-COVER-F-HTC-Touch-Pro2-Pro-2-Black-/180500606568?cmd=ViewItem&pt=AU_MobilePhoneAccessories&hash=item2a06acae68
And it's really cheap at less than 5 bucks including shipping..
It says 'hard rubber case' though is it flexible? Like, you can bend it in half without it breaking or damaging or anything?
Besides, that's for Touch Pro 2, not Tilt 2
OtterBox makes tp2 protective cases.
smithisize said:
It says 'hard rubber case' though is it flexible? Like, you can bend it in half without it breaking or damaging or anything?
Besides, that's for Touch Pro 2, not Tilt 2
Click to expand...
Click to collapse
Yeah I have a TP2 T7373 and no, I don't think it's flexible at all. Bad description. But I like my cases to be solid and stiff, not flexible so it's ok. Will drill this one to perform easy resets. A matter of taste definitely
orb3000 said:
have a look at this guide.
Hope it helps.
Click to expand...
Click to collapse
I have one of these cases and it works very well. Sturdy and fits snug while also not being too hard. I would highly suggest getting it. The back also looks pretty sweet too.
I want one so bad, but don't have $20 dollar lol I'm broke
smithisize said:
I want one so bad, but don't have $20 dollar lol I'm broke
Click to expand...
Click to collapse
In the thread orb3000 listed, it is mentioned there is a hong kong seller on fleabay that has them for slightly over $12usd shipped. You just have to wait two+ weeks to get it.
For the OP and to confirm what some of the others have said about those cases... this silicon case is well worth it and makes it EASY as pie to remove (literally 2 seconds or less) when you need to do a soft reset or battery swap. Just as easy to put back on in a few seconds. Much better than the body glove hard case, etc I have tried in terms of ease of removal/installation.
*dupe post, my apologies*
well worth the money.. I have one and love it, only complaint is it does make the unit seem much thicker.... but for the protection it is worth it.
The Verison Touch 2 case listing by ittrimming on eBay for around $5 is thin hard plastic shell snap-on with rubber coating for feel/grip.
The Tilt 2 camera button has to be trimmed out of shell (easy task). The left and right edges of case need thin foam strips added to keep shell from contacting resistive screen edges (nasty responsiveness otherwise). Less easy task, BUT still worth effort for great handling cased phone.
I love my otterbox!
Otterbox is a bit expensive, but if overlook that, well worth the money.
scooper said:
Otterbox is a bit expensive, but if overlook that, well worth the money.
Click to expand...
Click to collapse
Can be had for around 30 shipped on amazon. Only downside is how hard it is to press the power button to turn the screen on and off.
VDubGli said:
Can be had for around 30 shipped on amazon. Only downside is how hard it is to press the power button to turn the screen on and off.
Click to expand...
Click to collapse
Yeah, just that not everyone wants to spend that for cases and I was one of them, with previous phones. But when I got this phone and found it to be sleek, I decided it deserves better.
And I did have problem with that before when I first got it. Now that I got used to it, I don't mind it too much. I think of it as child-lock. Also, I had problem with some of my previous touch phones where they were easily turned on accidentally while in my pocket. Then more touches and usually ended up calling people and that really annoyed me.
I have a Ringke slim. I usually keep my phone naked but when I go mountain biking, I've been putting this case on and putting my n6 in my backpack, however I have some scratches on the glass that I'd prefer don't get any worse.
I'm wondering if any of you have come across what I think I want out of a case and whether you can recommend me something please...
Wants:
- Rugged, hard back otter box / UAG rugged (perhaps not so extreme )... Basically if I fall off and land on my backpack i want as much protection against crushing as I could expect
- flip cover or something similar that can securely cover the screen
- potentially still able to use the camera
Don't wants:
- flimsy or magnet closing mechanism
- not bothered about waking the screen on opening
- slots for credit cards
Does anything like this exist?
I never take my phone with me on the bike, mountain or road. I don't crash often but when I do...
I do take my old galaxy nexus with me though, use it for Strava and access to 911 (no SIM). I keep it in a neoprene sleeve just in case. and that's a 4 year old phone
edit: if I were to take my N6 along, I'd opt for a thick neoprene sleeve. also, my current leather flip case is from tetded.com. no credit card slots and the flip cover has a little friction tab that keeps it closed. maybe not quite crash proof but it is a nice case.
edit: here's the link http://www.tetded.com/home/en/nexus...nexus-6-xt1100-xt1103-dijon-iii-lc-black.html
PhilDX said:
I never take my phone with me on the bike, mountain or road. I don't crash often but when I do...
I do take my old galaxy nexus with me though, use it for Strava and access to 911 (no SIM). I keep it in a neoprene sleeve just in case. and that's a 4 year old phone
edit: if I were to take my N6 along, I'd opt for a thick neoprene sleeve. also, my current leather flip case is from tetded.com. no credit card slots and the flip cover has a little friction tab that keeps it closed. maybe not quite crash proof but it is a nice case.
edit: here's the link http://www.tetded.com/home/en/nexus...nexus-6-xt1100-xt1103-dijon-iii-lc-black.html
Click to expand...
Click to collapse
Cool, cheers. Thats a start.
I thought about the neoprene sleeve. I could maybe fit my ringke in there too. The concern there was that i have 2 pieces (phone and cover) that I could easily drop in a puddle...
Hello rootSU, I am looking for this kind of bag/sleeve/pouch thingy.
I was looking for a horizontal keep-safe-pouch, like it was the original ASUS nexus 7 accessory: https://www.youtube.com/watch?v=PEqJErYwIoM
So my options are limited to a pouch only for carrying that should have an insert hole on the side of the device. I do not want to use my phone with any kind of rugged/rubber/plastic protection that actually impairs the feeling the actual phone surface gives.
So far had zero luck.
The closest hits were:
PDAir Leather Wallet Pouch for Motorola Google Nexus 6 XT1103 (Black/Red Stitch)
Artwizz Universal Wallet Case für Smartphone, schwarz
The problem is that I do not need this wallet pockets at all.
If you find anything keep us posted please.
PhilDX said:
I do take my old galaxy nexus with me though, use it for Strava and access to 911 (no SIM). I keep it in a neoprene sleeve just in case. and that's a 4 year old phone
Click to expand...
Click to collapse
Are you sure you can dial 911 without SIM, please double check that. Law here say the phone without SIM should not be able to dial emergency services. This was due to high percentage of false reports and makes sense when you think about it.
You can have any SIM, even deactivated one to call 911, or in our case also 112.
De5tr0yer said:
Are you sure you can dial 911 without SIM, please double check that. Law here say the phone without SIM should not be able to dial emergency services. This was due to high percentage of false reports and makes sense when you think about it.
You can have any SIM, even deactivated one to call 911, or in our case also 112.
Click to expand...
Click to collapse
I never actually tested it. when it boots up there is a little message saying there's no SIM and it can only be used for emergency calls. how would I test it without actually calling 911? I will put my old deactivated SIM card in just in case, thanks
---------- Post added at 08:37 PM ---------- Previous post was at 08:17 PM
@rootSU
here's a couple ideas, not exactly what your looking for but may be of interest...
I have this neoprene case, you can put a TPU style case or a flip case on the N6 and it will still fit in here with a little room to spare, you could even add a piece of hard plastic on the inside for added screen protection (the hard plastic dividers they make for paper binders works great):
http://www.amazon.com/gp/product/B00NZ2GB4E/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
this is another case I have, same idea as above but it's a pretty snug fit with my flip case on:
http://www.amazon.com/gp/product/B00NKA4NQY/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
PhilDX said:
I never actually tested it. when it boots up there is a little message saying there's no SIM and it can only be used for emergency calls. how would I test it without actually calling 911? I will put my old deactivated SIM card in just in case, thanks
Click to expand...
Click to collapse
You can try dialing 911 without a SIM. I am 99% sure it won't work, so you have almost nothing to feel scared about. You can let it ring once and hang up if you achieve a connection.
The message emergency calls appears every time, with or without SIM, but here in EU it does not work, I have tried it
I used this
http://www.ebay.com/itm/28156183942...49&var=580579034603&ssPageName=STRK:MEBIDX:IT
plus add this and its going to look sweet.
https://dbrand.com/shop/nexus-6 Black carbon fiber with orange M, and the ring around the camera will be orange
still waiting on the skin
the_rooter said:
I used this
http://www.ebay.com/itm/281561839424?_trksid=p2060778.m2749.l2649&var=580579034603&ssPageName=STRK%3AMEBIDX%3AIT
plus add this and its going to look sweet.
https://dbrand.com/shop/nexus-6 Black carbon fiber with orange M, and the ring around the camera will be orange
still waiting on the skin
Click to expand...
Click to collapse
"They see me trollin, they hatin"
joshm.1219 said:
"They see me trollin, they hatin"
Click to expand...
Click to collapse
im trolling?
the_rooter said:
im trolling?
Click to expand...
Click to collapse
Did you read the op
rootSU said:
I have a Ringke slim. I usually keep my phone naked but when I go mountain biking, I've been putting this case on and putting my n6 in my backpack, however I have some scratches on the glass that I'd prefer don't get any worse.
I'm wondering if any of you have come across what I think I want out of a case and whether you can recommend me something please...
Wants:
- Rugged, hard back otter box / UAG rugged (perhaps not so extreme )... Basically if I fall off and land on my backpack i want as much protection against crushing as I could expect
- flip cover or something similar that can securely cover the screen
- potentially still able to use the camera
Don't wants:
- flimsy or magnet closing mechanism
- not bothered about waking the screen on opening
- slots for credit cards
Does anything like this exist?
Click to expand...
Click to collapse
joshm.1219 said:
Did you read the op
Click to expand...
Click to collapse
Actually I did and if u go to the beginning which I will underline for u. This case protects from falls, and its just about similar to the uag case but without the back. I dropped by device a few times with this case on and no damage to the device. I even had the phone in my back pocket with case on it and landed on it when falling with no issues. No need to be rude. I read the op and even underline the parts your looking for that matches this case.
the_rooter said:
Actually I did and if u go to the beginning which I will underline for u. This case protects from falls, and its just about similar to the uag case but without the back. I dropped by device a few times with this case on and no damage to the device. I even had the phone in my back pocket with case on it and landed on it when falling with no issues. No need to be rude. I read the op and even underline the parts your looking for that matches this case.
Click to expand...
Click to collapse
Thanks for the input. Unfortunately I need all of the "wants" in a single case. So rugged like uag but with a flip / cover for the screen.
rootSU said:
Thanks for the input. Unfortunately I need all of the "wants" in a single case. So rugged like uag but with a flip / cover for the screen.
Click to expand...
Click to collapse
Sorry didnt see that you wanted all the wants. Didnt state. Wasnt sure if its atleast some of them. I apologize.
the_rooter said:
Sorry didnt see that you wanted all the wants. Didnt state. Wasnt sure if its atleast some of them. I apologize.
Click to expand...
Click to collapse
No probs.
the_rooter said:
Actually I did and if u go to the beginning which I will underline for u. This case protects from falls, and its just about similar to the uag case but without the back. I dropped by device a few times with this case on and no damage to the device. I even had the phone in my back pocket with case on it and landed on it when falling with no issues. No need to be rude. I read the op and even underline the parts your looking for that matches this case.
Click to expand...
Click to collapse
I own the bumper too, it's actually the least protective one I own. It has an open back and almost no front lip. Almost every case for this device covers more of the device. The title of the thread is" rugged flip case'. A bumper is not a case and certainly not a rugged case. It obviously doesn't have a front flap either. He specifically requested a case with a hard back, the bumper has no back. That's why it seemed like you were trolling to me, because it seems to be the exact opposite of the op. My bad I guess.
joshm.1219 said:
I own the bumper too, it's actually the least protective one I own. It has an open back and almost no front lip. Almost every case for this device covers more of the device. The title of the thread is" rugged flip case'. A bumper is not a case and certainly not a rugged case. It obviously doesn't have a front flap either. He specifically requested a case with a hard back, the bumper has no back. That's why it seemed like you were trolling to me, because it seems to be the exact opposite of the op. My bad I guess.
Click to expand...
Click to collapse
That a matter of opinion. But that's why I commented the op stated what he wanted he never stated he wanted them all, until after he corrected me
the_rooter said:
the op stated what he wanted he never stated he wanted them all
Click to expand...
Click to collapse
I did, both in the title of the thread and the first post.
I stated:
Rugged flip case for all round protection?
Click to expand...
Click to collapse
what I think I want out of a case and whether you can recommend me something please...
Wants:
- Rugged, hard back otter box / UAG rugged (perhaps not so extreme )... Basically if I fall off and land on my backpack i want as much protection against crushing as I could expect
- flip cover or something similar that can securely cover the screen
- potentially still able to use the camera
Click to expand...
Click to collapse
Anyway, I'm a case freak and I have found nothing like this, I want the same thing. I'm pretty sure I've looked at every case on amazon, amazon Japan, and alibaba. Plus the obvious places like casefanatic, etc.
I think your best bet is a dual layer case with a built in screen protector and an armband so it doesn't fall.
joshm.1219 said:
Anyway, I'm a case freak and I have found nothing like this, I want the same thing. I'm pretty sure I've looked at every case on amazon, amazon Japan, and alibaba. Plus the obvious places like casefanatic, etc.
I think your best bet is a dual layer case with a built in screen protector and an armband so it doesn't fall.
Click to expand...
Click to collapse
Well another thing I have considered is some kind of waterproof mount for the handlebars but if I did that I would definitely want to use teh camera and they don't look like they want to provide that.
http://www.amazon.co.uk/Navitech-Bicycle-Motorbike-Waterproof-Motorola/dp/B00R7SWNCG