Related
Is it possible to plug a USB card reader into the varioII?
I want to travel next week and just take my VarioII and Sony camera
I want to take pics on the sony camera and then transfer them to the VarioII so I can post them on the internet?
The Sony Camera is MS DUO
Any ideas anyone
Cheers
im guessing that this is a no no then?
bummer, really wanted to be able to do this
As far as I know, the tytn miniusb socket is not host capable; this mean that it can only be the slave of a computer
skipjack said:
im guessing that this is a no no then?
bummer, really wanted to be able to do this
Click to expand...
Click to collapse
You really need a camera with mini SD. I have one with a full SD but not mini.
don't think it would work, since the computer and the device both host a female socket, so you usually need a male to male connector. i've never seen anything that hosts a female socket (the usb port that you normally see on your computer)
thanks for the feedback
monkey_knight said:
don't think it would work, since the computer and the device both host a female socket, so you usually need a male to male connector. i've never seen anything that hosts a female socket (the usb port that you normally see on your computer)
Click to expand...
Click to collapse
The later Sharp Zaurus PDAs have a port that can be used as a Host, it has a similar miniUSB socket to the Hermes, and can with an adaptor cable accept any USB device.
giryan said:
The later Sharp Zaurus PDAs have a port that can be used as a Host, it has a similar miniUSB socket to the Hermes, and can with an adaptor cable accept any USB device.
Click to expand...
Click to collapse
Unfortunately I have tried using my Zaurus's miniUSB cable to no avail. So I suppose it must b true, just doesnt have host capabilities... though I wouldnt be devistated if I was wrong
There is a really simple answer to this.
The Hermes uses MicroSD. Some company on eBay does a MicroSD to Memory Stick Pro Duo. I think you can get an adapter for Pro Duo to Memory Stick. So stick the adapters into your camera. And then use the MicroSD in both phone/camera. I use the same solution between my p910i and my Dimage Z2.
anyone know where i can get a 12-pin str trk usb to normal mini usb adaptor? i want to be able to charge it with my normal mini USB chargers...expansys have it down as discontinued and ebay not being very forthcoming...
Hi,
I got mine from here http://www.hot-wire-telekom.de/
It is a german shop. I don't know if it helps.
My Adapter have 3,5 mm Earphone out and one miniusb to charge.
regards
neneoc
thanks
neneoc said:
Hi,
I got mine from here http://www.hot-wire-telekom.de/
It is a german shop. I don't know if it helps.
My Adapter have 3,5 mm Earphone out and one miniusb to charge.
regards
neneoc
Click to expand...
Click to collapse
they only accept payment via bank xfer,but it's better than nothing. anyone else know any other sellers?
Does anyone have the pinout of the non-standard Startrk USB connector?
any other place to get one besides that german site? somewhere we can purchase online please. thanks
The adaptor looks like just what I need. I almost ordered a couple from the liked site, but it all became too hard. My German is just not that good. I have searched all the usual places but cannot find this adaptor anywhere else. Please, if anyone else knows where ti can be sourced (preferebly with payment via credit card) let us all know.
Mike
i've tried to search all over internet and found nothing. the only ones available are the HTC made Y cable adaptor which is pretty much overpriced and useless because i want a mini usb+3.5mm jack. even just a mini usb adaptor will do (original HTC made mini usb adaptor available, then again, overpriced). where can i find something like that? any idea guys?
yep, i've searched pretty much the whole internet
alexnvidia said:
i've tried to search all over internet and found nothing. the only ones available are the HTC made Y cable adaptor which is pretty much overpriced and useless because i want a mini usb+3.5mm jack. even just a mini usb adaptor will do (original HTC made mini usb adaptor available, then again, overpriced). where can i find something like that? any idea guys?
Click to expand...
Click to collapse
! and there's nothing. grr. if it wasn't such a ballache i'd get a spare standard cable and cut it up to solder on a mini usb socket. pinouts can't be that hard - although i'm not sure where i'd get an inline mini usb socket from.
I've bought this one for 3.5 mm jack...works great:
http://www.netimes.com/shop/stereo-headphone-adapter-for-htc-startrek-platform-p-421.html
I've paid with credit card (click on paypal....don't need a paypal account), received it within a week (all the way to Europe....;-).
headphone only though
...no mini USB charge point. thanks though.
ric
yeah, we need something that has standard mini usb
I found a site on how to DIY usb t0 3.5mm jack for audio
http://www.andrewgrant.org/2007/08/24/making-a-35mm-headphone-adapter-for-the-cingular-3125.html
i did some modify of my own . i use sony ericsson headset instead of the one from electronic store because sony ericsson unit have mic and button to answer call. and SMALLER = LOOK BETTER
just open up the sony ericsson mic unit and there is all the wiring label print on the small little circuit board. just follow the tutorial for the wiring code and solder into it.
work great but no volume control , have to control from the phone
Mini Usb Please
how hard did you look
this was the 4th link on google
http://www.motorazr.com/content/accessories/5-19--3062.htm
lewnetoons said:
this was the 4th link on google
http://www.motorazr.com/content/accessories/5-19--3062.htm
Click to expand...
Click to collapse
is that thing pin to pin compatible with htc strtrk? the name does sound close enough (micro usb)
landwomble said:
anyone know where i can get a 12-pin str trk usb to normal mini usb adaptor? i want to be able to charge it with my normal mini USB chargers...expansys have it down as discontinued and ebay not being very forthcoming...
Click to expand...
Click to collapse
Maybe a little bit complicated...but let me suggest...
Take a Female mini usb from an old device (for example). Connect/sold/attach it to a Female standard usb (not all wires needed). Use startreck usb cable to charge
so close its exact
micro usb is the 3125 adapter type
Is this the same connector?
lewnetoons said:
this was the 4th link on google
http://www.motorazr.com/content/accessories/5-19--3062.htm
Click to expand...
Click to collapse
I thought the Qtek 8500 12 pin connector was unique to that handset. Have you just searched for "micro usb adaptor" or do you know something we don't?
If this would work I'd be very happy but I don't think it will.
Ric
not sure
lewnetoons said:
micro usb is the 3125 adapter type
Click to expand...
Click to collapse
http://www.crunchgear.com/2006/11/14/cingular-3125-star-trek-hands-on/
"A regular micro-USB port would have been better than the proprietary HTC port, but we understand its necessity for the slim shape the phone has"
buy it and try it
quote "A regular micro-USB port would have been better than the proprietary HTC port"
The port on the 3125 is micro usb, the port on say a 8525 or 8125 is Mini usb
I am not saying the adapter will work, only that it is a micro to mini adapter and it should work.
I think its possible to use the same carcharger from the HTCTyTN (Hermes) and HTCTyTNII for the HTC Touch HD. I read somewhere its possible. Somebody any experience with that!
luckyuser said:
I think its possible to use the same carcharger from the HTCTyTN (Hermes) and HTCTyTNII for the HTC Touch HD. I read somewhere its possible. Somebody any experience with that!
Click to expand...
Click to collapse
Should, my car charger for my Tilt works fine with the Fuze. It's the same connector. I do believe all HTC products have the same connector.
beachboyde said:
Should, my car charger for my Tilt works fine with the Fuze. It's the same connector. I do believe all HTC products have the same connector.
Click to expand...
Click to collapse
Actually, its just a simple mini usb connector. My Mitac Mio A701 has the same. I am using the same car charger for Mio A701 and HTC touch HD. I use a Kensington USB charger, for 6.99 euros its yours. Then use any normal usb to mini usb cable...
david-v said:
Actually, its just a simple mini usb connector.
Click to expand...
Click to collapse
Unfortunately, it's NOT a standard mini usb connector. HTC has a different connector that very much looks like but isn't mini usb. You can't use a mini usb cable with HTC devices.
Here's a picture of HTC connector: http://www.tracyandmatt.co.uk/blogs/index.php/2006/09/10/htc_hermes_usb_connector_pin_config , as opposed to the mini usb connector (http://www.accesscomms.com.au/reference/usb.htm)
What's true, though, is that all newer HTC devices use the same connector, so you are able to use the cable from any other HTC device you might have.
cgdams said:
Unfortunately, it's NOT a standard mini usb connector. HTC has a different connector that very much looks like but isn't mini usb. You can't use a mini usb cable with HTC devices.
Click to expand...
Click to collapse
You are wrong. With the Touch HD comes an ordinary Mini USB cable.
Charging is done by the pins for normal USB. The ExtUSB additional pins are for a headset only.
this is the one I use and it works no problem .....
http://www.uxcell.com/car-charger-for-motorola-razr-black-p-3590.html
it charged my TYTNII as well, it's one I had from a previous phone
cgdams said:
Unfortunately, it's NOT a standard mini usb connector. HTC has a different connector that very much looks like but isn't mini usb. You can't use a mini usb cable with HTC devices.
Here's a picture of HTC connector: http://www.tracyandmatt.co.uk/blogs/index.php/2006/09/10/htc_hermes_usb_connector_pin_config , as opposed to the mini usb connector (http://www.accesscomms.com.au/reference/usb.htm)
What's true, though, is that all newer HTC devices use the same connector, so you are able to use the cable from any other HTC device you might have.
Click to expand...
Click to collapse
The connector is compatible with mini usb. It looks different, but you can still use a normal mini usb connector, trust me, it works
I tried the same carcharger on my Touch that I used for my HTCTyTn, it works during navigation and it works good. But at the same time the battery needed a recharge to. The only thing that regonized was that the device was warmingup, but not extremly.
In the past, sometimes, but not always the TyTn get the same warmingup. But never had an real problem with that.
Is that a normal behavior
Car Charger
Could one of you please advice me, whether I can use the same car charger, (not the usb to mini 11 pin USB cable) which I had for my XDA II, for my Touch HD? I am concerned about the output from the charger for XDA II as I don't know whether it is a 5.0V one, as required for Touch HD. Thank you.
hevikar said:
Could one of you please advice me, whether I can use the same car charger, (not the usb to mini 11 pin USB cable) which I had for my XDA II, for my Touch HD? I am concerned about the output from the charger for XDA II as I don't know whether it is a 5.0V one, as required for Touch HD. Thank you.
Click to expand...
Click to collapse
As we said before that Touch HD has a USB connector, and USB is ALWAYS 5.0V!
esackbauer said:
As we said before that Touch HD has a USB connector, and USB is ALWAYS 5.0V!
Click to expand...
Click to collapse
Will that mean that I can use the XDA II's car charger for this,as that has an usb slot, to which I can plug my HD's USB sync cable? Sorry, if I sound stupid. I am a newbie. Thank you very much for your help.
Hi all,
I ordered an original HTC car charger. Because it had an mini usb which looks differently, I called HTC.
They assured me that this charger was ment for the HTC touch HD and could be used without a problem.
The car charger comes with an mini usb plug.
car charger CC C100 HTC
hevikar said:
Will that mean that I can use the XDA II's car charger for this,as that has an usb slot, to which I can plug my HD's USB sync cable? Sorry, if I sound stupid. I am a newbie. Thank you very much for your help.
Click to expand...
Click to collapse
yes, it means you can...and you can use any (mini) usb cable you want too...easy, isn't it? I use a retractable USB cable.
david-v said:
yes, it means you can...and you can use any (mini) usb cable you want too...easy, isn't it? I use a retractable USB cable.
Click to expand...
Click to collapse
Thank you very much.
cgdams said:
Unfortunately, it's NOT a standard mini usb connector. HTC has a different connector that very much looks like but isn't mini usb. You can't use a mini usb cable with HTC devices.
Here's a picture of HTC connector: http://www.tracyandmatt.co.uk/blogs/index.php/2006/09/10/htc_hermes_usb_connector_pin_config , as opposed to the mini usb connector (http://www.accesscomms.com.au/reference/usb.htm)
Click to expand...
Click to collapse
I'm not sure how you guys use even "official" car charger for HTC HD
Look at those pictures ... this link
http://www.tracyandmatt.co.uk/blogs/index.php/2006/09/10/htc_hermes_usb_connector_pin_config
shows you HTC Touch HD socket ... it is straight on one end and bevelled on other end. It is extUSB
http://forum.xda-developers.com/attachment.php?attachmentid=31649&d=1164664052
But standard USB socket (even on official car charger listed on expansys site) is bevelled on BOTH ends
http://www.expansys-usa.com/zoompic.aspx?type=item&i=174221
How you guys charge your HD with "standard" USB ? Do you just force standard USB plug into extUSB socket on HD ?
bogdatov said:
I'm not sure how you guys use even "official" car charger for HTC HD
Look at those pictures ... this link
http://www.tracyandmatt.co.uk/blogs/index.php/2006/09/10/htc_hermes_usb_connector_pin_config
shows you HTC Touch HD socket ... it is straight on one end and bevelled on other end. It is extUSB
http://forum.xda-developers.com/attachment.php?attachmentid=31649&d=1164664052
But standard USB socket (even on official car charger listed on expansys site) is bevelled on BOTH ends
http://www.expansys-usa.com/zoompic.aspx?type=item&i=174221
How you guys charge your HD with "standard" USB ? Do you just force standard USB plug into extUSB socket on HD ?
Click to expand...
Click to collapse
The HD plug is compatible with mini USB. Yes, on the HD it is flat on one side. Don't worry. You can use a regular mini USB charger. There is no forcing there, just look at the pictures...the connection showed there can take "more" than just mini USB, not less. A normal mini USB is bevelled at both sides. on HD it is bevelled on only one side, meaning you can fit there a "bigger" plug (read extmini USB), not a "smaller" plug
Oh, maybe I forgot to mention. I have a HD, and for the last time, you can use all your mini usb connectors on the HD (I use 4 different ones, at work, in car, at home for charging and at home for sync). They all fit, it is compatible...no forcing!!! End of thread....please....?
I made a video for those who do not believe that a miniUSB can plug into extUSB socket -> http://www.youtube.com/watch?v=n05lUtReubU
I use a genuine htc charger which charges quicker than a generic one from the lighter socket. I believe this is because generic charger is at the standard usb 500mah where as the genuine charges at 1000mah and therefore a quicker charge. Note your power supply (the one which plugs into the wall) supplies 1000mah.
By the way, I've used various cables with my phone and although the connectors always fit no problem, that doesn't mean they actually have worked!
For example, I've tried a power supply for an older Orange SPV and was surprised when it refused to charge my TyTnII!?
I've also had other issues with usb connection to my PC where it will charge from the usb port but will not connect to Windows until I change the cable. The cable that didn't work, works perfectly well with other mini usb devices. This was actually from a Belkin 16-in-1 card reader thing... never had much faith in belkin!!
esackbauer said:
You are wrong. With the Touch HD comes an ordinary Mini USB cable.
Charging is done by the pins for normal USB. The ExtUSB additional pins are for a headset only.
Click to expand...
Click to collapse
can you take a picture of your mini USB (assuming you have HD)?
My HTC HD has the special connetor. the regular mini USB does not fit into the HD jack.
The only option I see is to get a generic lighter plug with standard usb jack and connect the proprietary cable and stick it in the plug.
But you still beed another cable (one at home and one in your car)
I had the KJAM and it has a standard mini usb - It does not fit in the HD.
kubeb said:
can you take a picture of your mini USB (assuming you have HD)?
My HTC HD has the special connetor. the regular mini USB does not fit into the HD jack.
The only option I see is to get a generic lighter plug with standard usb jack and connect the proprietary cable and stick it in the plug.
But you still beed another cable (one at home and one in your car)
I had the KJAM and it has a standard mini usb - It does not fit in the HD.
Click to expand...
Click to collapse
I think it would be better if you show us a picture of your mini usb plug, the one that does not fit. That makes more sense than us showing a "regular" mini-usb plug that fits in the htc extusb, which is backwards compatible with mini-usb.
btw, did you watch the video from salcho? that says more than pictures I guess. Please, make a picture of your mini-usb cable and show it to us here.
David
Since the lapdock has an HDMI in (for the atrix to output to the screen), would it be possible to hook up and output an xbox 360 with the correct adapters (like this)? Or is the HDMI plug just for use with the atrix?
Dude
F**king brilliant man I was at the att store the other day and when I yanked the atrix out of the lapdock(one of which I have ordered) it said NO HDMI INPUT. I bet it will work with a micro HDMI adapter....ordering from China asap, so expect it to be a month :S
crashingout said:
F**king brilliant man I was at the att store the other day and when I yanked the atrix out of the lapdock(one of which I have ordered) it said NO HDMI INPUT. I bet it will work with a micro HDMI adapter....ordering from China asap, so expect it to be a month :S
Click to expand...
Click to collapse
If it warned against hdmi input, it actually might not work . It might be a sort of proprietary jack in order to trigger the webtop on the phone. Even though we can just enable webtop with an hmdi cable, it might not work the other way around. But it's worth a shot seeing as the adapters shouldn't be too much money.
it didnt seem that way, if I can dummy load the usb connector possibly by using my atrix, then the hdmi is free for the taking, and when i pulled it out of the dock it seemed like, when you unplug a computer monitor, when it says nothing connected, it seemed like that, I bet this will work
XxKILLx3RxX said:
Since the lapdock has an HDMI in (for the atrix to output to the screen), would it be possible to hook up and output an xbox 360 with the correct adapters (like this)? Or is the HDMI plug just for use with the atrix?
Click to expand...
Click to collapse
That adapter wont work, it would need to be a FEMALE micro and not a male micro which is what you linked to
http://www.mouser.com/search/refine.aspx?keyword=111458226
What about this: http://goo.gl/yWHar to this: http://goo.gl/R716a ?
DOH! Just noticed the MALE to FEMALE mini is on backorder.
Dr.Jeckyl said:
What about this: http://goo.gl/yWHar to this: http://goo.gl/R716a ?
DOH! Just noticed the MALE to FEMALE mini is on backorder.
Click to expand...
Click to collapse
still not right. The dock has a male mini connector, to make it work you need a full sized male to mini female cable. They don't make those, so you'll have to make one yourself.
Or you could use the full size male to mini male adapter along with a female mini to female mini coupler or "extender".
Sent from my MB860 using XDA Premium App
barry99705 said:
still not right. The dock has a male mini connector, to make it work you need a full sized male to mini female cable. They don't make those, so you'll have to make one yourself.
Click to expand...
Click to collapse
I realize that. The first link is a mini FEMALE to standard MALE. ;-)
Dr.Jeckyl said:
I realize that. The first link is a mini FEMALE to standard MALE. ;-)
Click to expand...
Click to collapse
it is micro hdmi not mini hdmi
They exist
Last week I was working with my exporter and I noticed a boatload of new micro hdmi products, one of them was male and female adaptors, male to male, female to female etc, I guarantee it you guys they exist, and they also exist for micro usb, with which we can dummy load the shell into powering on with the phone if necessary. This will take maybe $6 worth of chinese parts, a month for shipping, and patience for the adaptors to arrive for an investigation. I'll try to order by next tuesday
O, dang it. I didn't realize i found the wrong adapter. I forgot that we would need a female adapter.
Sent from my MB860 using XDA App
crashingout said:
Last week I was working with my exporter and I noticed a boatload of new micro hdmi products, one of them was male and female adaptors, male to male, female to female etc, I guarantee it you guys they exist, and they also exist for micro usb, with which we can dummy load the shell into powering on with the phone if necessary. This will take maybe $6 worth of chinese parts, a month for shipping, and patience for the adaptors to arrive for an investigation. I'll try to order by next tuesday
Click to expand...
Click to collapse
I look forward to hearing more about this.
If it would indeed be possible to use the laptop dock for such a purpose then I might be able to justify picking one up.
...it would then make a nifty portable DVD player too...
just get an inverter to run a blu-ray player in your car, make a $50 cable...
You guys have wayyyyyy too much time on your hands
(from a guy who doesn't own a gaming console )
However, as a proof-of-concept, it would show what the lapdock is capable of. Get a ATSC tuner with HDMI out and you would have a nice portable HDTV.
I am actually wondering if there is a way to put a touchscreen in place of the simple LCD (like Asus is doing with their prototype)
Pretty sure that the screen is going to shut off without the phone activating the display through the USB connection as well.
Good luck though, hope I'm wrong!
Ririal said:
Pretty sure that the screen is going to shut off without the phone activating the display through the USB connection as well.
Good luck though, hope I'm wrong!
Click to expand...
Click to collapse
Which is why I will dummy load the microusb terminal in the dock with my atrix. I found the female micro hdmi part we are looking for! I'll put up more info ASAP, I'm a bit swamped ATM
It might attempt to sense an atrix via the microusb port. Perhaps a keep alive signal. But it will use the same proprietary protocols that all the docks use to trigger the correct mode.
Sent from my Motorola Atrix 4G on the network with the most backhaul, whatever that is. This post might have errors as I hate touchscreen keyboards.
Nice to see I'm not the only one that saw the no input message and thought to myself, HEY I CAN PLUG SOMETHING ELSE IN! Anyways, anybody get this working yet? I found an adapter on Ebay that should do the trick... But I guess I'm not allowed to post that yet... Take a look though, they do exist if you do not mind waiting for it to ship from China.
I think this just might work!! Sometimes when I plug in the phone I get a message on the screen "no hdmi input". And if this does in fact work, guess what. The atrix 2 will work with our "outdated" lapdocks haha
it seems that some people on the forum say they have a standard micro USB connector on the Flyer??? and most of the ebay sellers list standard micro usb products for the HTC Flyer
MY connection is a proprietary one - it looks like a micro usb but has a 'step' in it
like this one...zoom in on the picture
http://www.expansys.com.au/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
wtf is going on?
Try it, you will like it, except for charging.............
try what? what will i like? what about the charging?
off the shelf micro usb works fine.
The proprietary style is only for charging
If u have a micro usb cable then u have to put it in the opposite way. Like this
Sent from my PG86100 using XDA Premium App
It's a generic micro USB connection. The extra's is just that, extra. And not mandatory. I read somewhere (could be here, could be somewhere else) that they made the different connector so you wouldn't use the charger on a device that can't handle the power. But you can use any micro USB cable to connect the device to your PC. And you can even use any micro USB charger, but you'll need a lot of patience as it'll take a long, long time!
While you can use a standard micro USB cable, I have heard it would be better to use the HTC one because it will stay in better. I have used a standard one just fine, but the HTC one does hold in better IMO.
vj092887 said:
If u have a micro usb cable then u have to put it in the opposite way. Like this
Click to expand...
Click to collapse
Its both proprietary AND standard. As vj092887 said, you insert the micro-USB male plug "upside-down" from how you would on most HTC devices. And it plugs into the "bottom half" of the jack. All this is in respect to the tablet laying flat, with the screen facing up.
If you use the included charger or sync cable, it takes up the "whole" jack. Sync doesn't really make a difference. But the included charger is much faster than standard HTC Micro-USB chargers.
jeebus on a swizzle stick, only after reading this did i actually shove a standard micro usb into it and i'll be damned.....
thanks guys
n7of9 said:
jeebus on a swizzle stick, only after reading this did i actually shove a standard micro usb into it and i'll be damned.....
thanks guys
Click to expand...
Click to collapse
Shortly after I got my Flyer, I was at work and wanted to connect it to my laptop. And realized I had left my (HTC) cable at home, sticking in my PC there. I was also kind of disappointed as I had bought the flyer specifically because you could use a micro USB cable!
So, I thought, well, why not try it and see if it fits. And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ), I got lucky this time and found it fitted
Sweetpea8472 said:
Shortly after I got my Flyer, I was at work and wanted to connect it to my laptop. And realized I had left my (HTC) cable at home, sticking in my PC there. I was also kind of disappointed as I had bought the flyer specifically because you could use a micro USB cable!
So, I thought, well, why not try it and see if it fits. And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ), I got lucky this time and found it fitted
Click to expand...
Click to collapse
USB cables tend to go in the right way on the third try!
Sweetpea8472 said:
And as I generally always first try to stick a cable in upside down (don't ask me why, even if I think about it, I'll try it upside down first ),
Click to expand...
Click to collapse
i NEVER put in cables upside down (because i always put a little dot on the top side of the connector using nail polish...you can use liquid paper for a more 'manly' experience)
Is there a source for an innexpensive extra cable? I've been using a standard micro USB and it works but feels very loose compared to the official HTC cable that came with my flyer.
Sent from my Transformer TF101 using Tapatalk
If you mean with a HTC style power connector, no, that's for charging only. For data cables Ebay or Amazon has them for about $1 each.
DigitalMD said:
If you mean with a HTC style power connector, no, that's for charging only. For data cables Ebay or Amazon has them for about $1 each.
Click to expand...
Click to collapse
I wouldnt buy those generic cables from ebay/amazon etc they are poorly made and can either break off in your device, break off the connector on the device, or short out.. I highly recommend getting either Motorola or HTC OEM cables. They cost $2 - $5 but its worth it.
http://www.amazon.com/Motorola-SKN5...1?s=electronics&ie=UTF8&qid=1323629211&sr=1-1
Does this mean that the MHL adapter with 5 pins will work (standard Micro USB), and I don't need the 12 pin MHL version (extMicro USB)?
galfert said:
Does this mean that the MHL adapter with 5 pins will work (standard Micro USB), and I don't need the 12 pin MHL version (extMicro USB)?
Click to expand...
Click to collapse
yes! but apparently it charges really slowly so microUSB is best left to data transfer only
str8upx said:
I wouldnt buy those generic cables from ebay/amazon etc they are poorly made and can either break off in your device, break off the connector on the device, or short out.. I highly recommend getting either Motorola or HTC OEM cables. They cost $2 - $5 but its worth it.
http://www.amazon.com/Motorola-SKN5...1?s=electronics&ie=UTF8&qid=1323629211&sr=1-1
Click to expand...
Click to collapse
Perhaps I wasn't clear enough. Although a standard micro USB connector works for me when transferring data I don't like how loose it seems in the Flyer's socket. So I want another cable just like the one that came with my Flyer, a micro ExtUSB cable. I've only found mini ExtUSB cables not micro ones, hence my request for an inexpensive cable source.
Sent from my Transformer TF101 using Tapatalk
bsoplinger said:
Perhaps I wasn't clear enough. Although a standard micro USB connector works for me when transferring data I don't like how loose it seems in the Flyer's socket. So I want another cable just like the one that came with my Flyer, a micro ExtUSB cable. I've only found mini ExtUSB cables not micro ones, hence my request for an inexpensive cable source.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
there are no inexpensive extUSB cables...i don't know where you are but try expansys or amazon in your country...they're all upwards of $20
There is no 3rd party source for the non-standard HTC proprietary connector.
HTC manufactured Windows Mobile and Android-based devices have a proprietary connector called HTC Micro ExtUSB (Extended USB). ExtUSB combines Micro-USB (with which it is backwards-compatible) with audio input as well as audio and video output in an 11-pin connector. The extra pins also allow for higher charging currents.
If you really want to spend on a high quality cable, here you go, the best, most expensive per foot USB micro cable in the world . For ~$25 this should keep your Flyer and small pets from bursting into flame............
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4256657&CatId=77
By the way, all the generic or other brand MHL adapters work fine with the HTC for connection to HDMI.