Related
I've done all search BUT still can not solve out my problem.
I tried to upgrade my current ROM (1.03) to 1.60 BUT when upgrade in process; suddenly it said cannot find the device(XDAII).
At that time I took out the machine from cradle and did soft reset. And put it back to cradle to continue upgrade. And the error message still said it still can not find the device.
When I tried to enter into Bootloader mode and USE ROM on SD to restore my original ROM, BUT I tried the method mentioned in some post;
still cannot go to BOOTLOADER mode. On the screen it always said " Serial on the top.
Could anyone help me please?
I have the same problem..
i even tried with Qtek Rom, MDA rom... still not working.
When I turn on the xda II, it only displaying serial on top and v.1 06 at bottom.
tried to run the xdaII upgrade rom with the error :
ERROR 100 : MODEL ID ERROR 1-N-PH-PH-PH
If I try with QTEK and MDA Rom it just does nothing, or it hangs for a long time..
I have tried many times and still not working..
please anyone..
I have the same problem, people, pls help
rom update from sd card
hello,
i did had this also on my old mda..
i fixed it with a rom update on a sd card
good luck
still waiting for a good working 2003 se for my mda2
XDAII stuck in bootloader
mine too , stuck in bootloader with written :
SERIAL V1.06
nothing else ,
what can we do pals ?
no one try to help ????
please ?????
thanks
steve
if you have something written on the screen; such as SERIAL V1.06 then in my opinion you're still okay. do a couple of hard resets, put the unit back on the cradle and double click the upgrade file again. a lot of chaps ran into this same problem but eventually got it going again.
cheers
Thanks Robson..
I did that last nite , but still facing same probs .....
by the way , how to drain my batt ? just take out from the unit for 1 hour ?
and it will automatically drainned ? pls tell me ... thanks before...
Hope this is help...
I have the same problem b4, its frustating to see my XDA become an "expensive brick". After trying everything finally worked. What i did, after u turn on your computer plug in the cradle and also put the XDA into the cradle. Usually the computer didn't recognize it as Pocket PC, so u need to insert the companion CD to ur CDROM. After the computer install the driver, go to folder where ur upgrade file at. Click on HimaUpgradeUt.exe and follow the instruction until finish. DON'T FORGET not to disconnect the power or even take out the XDA headset from the cradle until finish. Good luck guys
After I tried to downgrade my Qtec2020 from WM2005 tot WM2003SE the updated stoped in stage 1.
This is what I found in the RUULog.log file:
19:15:11 Connection with Serial
19:16:31 Begin stage 1
19:17:01 CE Erase retry 1
19:17:31 CE Erase retry 2
19:18:01 CE Erase retry 3
Now I am stucked in bootloader mode and tried softreset, hardreset, special WM2005 hardreset but nothing seems to work. I have only a grey screen with Serial v1.02 on it.
Is there anybody who could help me
I've never performed any downgrades from WM5.0 but I have an idea that could work?
Install WM5.0 again, then perform a Hardreset but this time perform the Registry and Storage format (press power+record+camera+reset pin for about 5 seconds and you should see a menu on the screen, by using the record button to select an option and camera button to change to YES. It should be NO, YES, YES and press ACTION button to save changes). Then unhide the Extended ROM and erase anything in there.
Then perform the downgrade to WM2003SE.
I hope this works for you...
Regards,
Rayan
Thanks for the information but it's not the solution.
I tried to install WM5 again but I get an error 112 during the install.
The RUULog.log file:
20:42:03 Connection with Serial
20:43:26 Begin stage 1
20:43:56 CE Erase retry 1
20:44:26 CE Erase retry 2
20:44:56 CE Erase retry 3
The device is still stuck in bootloader mode. All the reset actions won't work (soft, hard, special)
Have you tried the upgrade/downgrade method using an SD card instead of the cradle/pc?
No I only tried it by USB/PC. I will search the forum for how to do this and give it a try. I will let you know later if this is the solution. Thanks for the information so far.
Regards Marco
I search the forum but can't find any way to do this. Can someone tell me how to flash by SD card
It's in the Wiki, not the forums...
Here you go:
http://wiki.xda-developers.com/index.php?pagename=XDAtools
Good Luck!
Hi, I was just upgading my XDA 2 os when my laptop froze in the middle of the upgrade! Now it only has the o2 startup screeen it won' turn off or connect to my computer to complete the upgrade. What can I do?
Is my Xda gone for good??
skud try aggain
you can put it back in bootloader mode and try aggain
this time on a destop you know power problem in laptop
you will not want a power failure in the middle of an upgrade
hope thats helped
Stuck on Bootloader
I experienced the same thing too.
Just detached battery from your device for about 10 minutes (I pressumed, may need more time)... then do the downgrade again.
in your PC task manager ''end process'' the ff:
''wcescomm.exe''
''WCESMgr.exe''
''rapimgr.exe''
now connect again the device and start the reflash...it works for me.
hope this wl help you...
No joy I'm afraid. How can I get it back in bootloader mode when I can't get past the O2 startup screen. Putting in an sd card Doesn't do anything either it is completely dead except for the annoiying but colorful O2 Logo.
Ok, it just turned itself off so I am after turning it back on andnow all I have is a white screen! What is going on? The laptop crashed when it was at 65% in the upgrade proces.
I'll give this taskmanager thing a go and get back to ya.
Thanks for all the help btw!
I have placed a ROM.nb1 on my SD card, but I get a eror with the XDA OS Image Tool. It looks that I can't find any way to get out of the bootloader mode whatever reset I tried. The battery was out for almost 12 hours but this also makes no difference. Is there a other way to flash by SD card or is there a way to reset/upgrade the bootloader mode. I think the bootloader mode hangs or is corrupt.
Regards Marco
I've tried that now and it still won't connect and still the same white screen! Any othere suggestions? Is there anything I can download which would force a connection or install something onto my XDA or does anyone know how I can get past this blank screen and maybe get to the settings window?
This must have happened other people anyone managed to fix this?
:!: :!:
hey power kite! It seems we got similar problems but your a bit ahead in getting it fixed. Can you tell me where you got the Rom.nb1 file so I can give this XDA tool thing a go?
What kinda power kite you got BTW?
Here is the link where I get the NB1 file
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=sd+rom
Good luck
Cheers Power kite,
I was just doing a bit of seaching on the sd flash method and found a website that takes you throught it step by step if your interested
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=93&PN=1
Hurray I'm back in business!!! Talk about relief! :lol: Its upgrading as we speak!
Now just to watch it like a hawk and not let this crappy laptop crash again!
Thanks everyone!
Give that link a look Power kite.
Skud
99% !!!!!!!
Great that it worked for you.
I did procedure 1, 2 and 3 but I'm still stuck in bootloader mode. Every upgrade WM2005, WM2003SE wich I have flashed before give me an error 112. I have flashed my SD card but I don't get any instructions on my screen.
Is it possible to install the bootloader again or upgrade it. I think my problem is the bootloader.
Hi
I downloaded ROM from www.seeo2.com to upgrade my atome life, while upgrading there is nothing progress in update progress bar nearly 1 hour, and there is nothing ..., I disconntect usb cable then my atom life not boot any more, can anyone help?
and how to login to boot loarder?
Thanks
socheat said:
Hi
I downloaded ROM from www.seeo2.com to upgrade my atome life, while upgrading there is nothing progress in update progress bar nearly 1 hour, and there is nothing ..., I disconntect usb cable then my atom life not boot any more, can anyone help?
and how to login to boot loarder?
Thanks
Click to expand...
Click to collapse
remove Mini-SD connect USB press buttons "restart+record+volume" hold volume+record for a while... know u,l enter boot loader mode start upgrading
I try to do that but still blank screen, nothing appear
Help please..
If bootloader dead, how to reflash boot loader?
Thanks
remove your batteries. wait for a minute. then reinsert your batteries and DO as instructed by Alipi. You must have a charged battery; otherwise, you will still get a blank screen.
If your batteries are discharge, charge first with wall charger...
jiggs said:
remove your batteries. wait for a minute. then reinsert your batteries and DO as instructed by Alipi. You must have a charged battery; otherwise, you will still get a blank screen.
If your batteries are discharge, charge first with wall charger...
Click to expand...
Click to collapse
you must replace a flash rom or rewrite the flash rom bootloader program,otherwise,it will be a brick!
afeng11 said:
you must replace a flash rom or rewrite the flash rom bootloader program,otherwise,it will be a brick!
Click to expand...
Click to collapse
Thanks, but how to reflash rom bootloader program?
socheat said:
Thanks, but how to reflash rom bootloader program?
Click to expand...
Click to collapse
It's so hard for individual to reflash the bootloader,cos you had no tools that called JTAG interface,the JTAG interface inlucde a parallel port cable and corresponding software,and you had to know the JTAG interface in you ppc's motherboard!so hard of all to you and me!
So there is only way JTAG? is there other way to reflash bootloader?
Thanks
Err... to save you such problem... it would be wise just to bring the device to the O2 Service Centre and ask them to do it for you. They normally just replace the board (quicker) and flash your board later to be fixed into someone else's device who have the same problem as you.
The great thing about this solution is, IT'S FREE and your warranty is INTACT.
Sure
My atom life still under warrenty.
Thankss
HELP!! Flashing ROM (Winodows Mobile 6.5) Stock on 100%
hi guys... im using an Atom Life Limited Red... Im trying to flash it with this ROM:Atom Life WM6.5 build 23001.. Did all the things necessary like copy the rom file AL1.DIO into my 2gb memory card thats been formated to Fat16 and without any files in it..
Now after Holding the rec button and pressing the reset button, it start to detect my memory card, then updating its image from 0-100%. But after 100% and its now saying
**Mini-SD Update Image OK**%) its been taking a while to reboot it up.. i mean awhile like an 30mins to 1hr..
I really don;t know whats wrong.. tried downloading the ROM 3x already.. and its still the same... stock on 100% OK!..
Hope someone here can help and lend me a hand plsss...
thank you guys and more power..
Sarah_Shine said:
hi guys... im using an Atom Life Limited Red... Im trying to flash it with this ROM:Atom Life WM6.5 build 23001.. Did all the things necessary like copy the rom file AL1.DIO into my 2gb memory card thats been formated to Fat16 and without any files in it..
Now after Holding the rec button and pressing the reset button, it start to detect my memory card, then updating its image from 0-100%. But after 100% and its now saying
**Mini-SD Update Image OK**%) its been taking a while to reboot it up.. i mean awhile like an 30mins to 1hr..
I really don;t know whats wrong.. tried downloading the ROM 3x already.. and its still the same... stock on 100% OK!..
Hope someone here can help and lend me a hand plsss...
thank you guys and more power..
Click to expand...
Click to collapse
I'm having the same.... Did you find a solution?!
My AtomLife totally dead now, nothing happened when trying to turn on...
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Please try the search button in this forum!!! And don't worry it's not bricked;-)
sayjeng said:
My dopod is on ipl/spl 2.20
while trying to update to the latest PV 4.0.0.0.6 Touch, i encountered an error..
Fine, reset the device, went to bootloader, started the PV_Temp upgrade file for my G3 dopod.
halfway, the update fails and says the NBF file cannot be used.
i've tried every other NVID rom and it is the same..
so now i'm stuck in the bootloader screeen and i can't do anything
Click to expand...
Click to collapse
check your .NET Framework and see if you have the 2.0 version installed. Reboot your pc and start again. We always experience these hiccoughs.
i've tried the search..
seriously saying, its quite hard to find what i want..
i seem to be able to flash the PV_TEMP ROM, it says on my computer its successful but my PDA just goes back to bootloader.
anyway, i'm installing .Net framework 2.0... will see how that goes..
still doesn't work..
RUU says its congratulations...
PDA goes back to bootloader
i cna flash jester's rom, i can flash PV_temps rom..
but all i get is the bootloader screen after that..
can't flash the NVID thats from the upgrade guide... it just says wrong NBF file..
wonder how much will it cost for me to send it to service center to replace the whole flash chip
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
sayjeng said:
new problem, now i can't do anything at all cause i think my batt is dead..
how can i recharge it ?
Click to expand...
Click to collapse
so you know now what is the problem!
recharge it by connecting to a PC with USB and wait wait wait and hope for the best. Try recharging it by what ever means you can do. If you said, you are successful in getting PVtemp, then, try installing battery_status.cab (find it search it by google or whatever) and watch the battery_status line on the front page and wait for a + sign before the 100mA at the right bottom line to appear.
Wait till it is full, then redo step 2 again. I'm sure you can get over without getting the machine to the manufacturer for repair.
no no
the first problem still stands
i'm still stuck at bootloader..
but now i can't flash anything cause my batt is dead..
so i've got 2 problems now
hello all,
sayjeng, I got the same problem last week.
I couldn't use any RUU rom because of the corrupted nbf file.
The PV_TEMP rom worked but I was stuck on boot loader screen too...
I tried many times and with some random hard resets... Eventually, the fourth time , WM5 started...
My advice are :
- charge your battery by any means like SeaPea said
- reboot your desktop computer
- remove your (fully charged) battery from your phone for some seconds and put it back...
Really, I may have been lucky that time...
I just wanted to post here to say that I sympathize...
Good luck!
will give it a try tomorrow..
its past 1am now and i need to be up early tomorrow..
if it doesn't, really have to make a trip to service center..
wonder what should i tell them then..
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
sayjeng said:
oh, forgot to mention
i can't hard reset..
i can get to the part where it says 'Press Send to restore factory default, Other keys to quit'
when i press Send, it says Format FAT Partition and followed by Format is Failed
then i get a flash for 1 sec of the vendor boot screen which is all green, and its back to bootloader
Click to expand...
Click to collapse
me too....any progress?
Jow ... flash your rom from dopod!
If your Radio Rom is crashed ... it stuck at Bootscreen too! After that it must run! it fix partition errors too.
ROm from dopod is 2.15..
my prophet is now on 2.20...
i can't flash it... i haven't been able to find a vendor rom wiht 2.20..
does anyone have any ? Qtek maybe ?
something to get my prophet running...
cause i did try in my attempt to get my prophet back by flashing the Radio ROM.. and it fails.. maybe thats why i can't boot my prophet
tried almost every rom..
used almost every RUU
anyone got any RUU that might help ?
or any suggestions ? thinking of throwing the towel and just pass it to dopod for them to handle....
worst case, change ROM chip
finally
I got this to work using the guide - BUT:
Windows XP SP2 English was the key for me.
I used VMWare to do step 1 of flashing (NVID)
then step 2 of flashing I did on a separate PC.
Worked after so many different attempts
i am running on XP sp2 english.. not using vista..
problem is, i can't even hard reset my phone.. it just says Format is Failed.
but my phone seems fine and still responds to my plugging the USB in and reseting....
Hi sayjeng
The same problem with my imate jamin too..
Whatever you said in you posts is an exact recall of my case.
Now it makes two of us
Waiting to see if someone can come up with a solution.
IPL/SPL at 2.20
Frequent automatic disconnection from activesync.
No means to charge the battery which i think is almost dead.
Tried the Dopod rom,for no avail.
The list goes on and on just like yours.
help..Anyone..?
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
can you get to the tri-colour bootloader of hard spl?
if so you will be able to reflash the rom via sd card?
saied7 said:
Hi guys,
I installed a cooked version (Juggalo TP) on my TP ,after finishing the installation and automatic reboot , my device hanged on HTC BIOS.... !!!!!
PLEAAAAAAAAAAASEEE HELP ME...
i dont know what to do !!!!!!!!
i cant to ANYTHING....
Ive hard reset several times,took the battery out but nothing happens... stilll the same problem.
PLEASE help me ,is there any way to roll back to a previous version or default
or something... :'(((
I really appreciate your help... !!!!
Click to expand...
Click to collapse
hello, try to put it into bootloader and then try to flash a different rom, might b a dump question, but you have installed hard spl?
lupe
yes i have installed the HARDSPL ,but i dont know how to go bootloader,
when i press enter,vol down and reset it comes to a 3-4 color screen but immediately jumps to a white screen and asks me to reset all data (vol up) or cancel (vol down)
btw, i've put a rom on my sd card but nothing happend !
oh man.. pff
maybe you have to rename this rom to RAPHIMG.nbh
Volume down and reset (without the enter) will get you into Bootloader screen. From there is should pick up the ROM on the SD card and ask you if you want to flash.
thnx for the tips bro's.
i did as you said (vol down and reset without enter)
and it asked me to load the image by pushing the enter button and i did.
now its about 15-20min that im waiting and still is on the 3color screen and nothing moves or comes or goes...
is it normal?
finally done. back to normal
oh im so happy , thnx for the help.
saied7 said:
finally done. back to normal
oh im so happy , thnx for the help.
Click to expand...
Click to collapse
glad to here its working again. could you please post exactly what you did as others might find themselves in this same spot, if they know what you did to fix it, it will save them time and also keep them from having to start a new thread.
thanks
Lupe
ya my problem was as i mentiond before i installed a CDMA version(USA VERSION locked on a carrier i think) , because the roms that were cooked are amazing,beautiful and dynamic ... but i didnt know that its not compatible with a normal TP and my phone after installation hanged just on the BIOS screen...nothing goes,nothing comes...i thought i've bricked my phone !
but after your advises i put one of the GSM roms on the SD card and changed the name of ruu_signed.nbh to RAPHIMG.nbh and VOL DOWN + SOFT RESEST to go to the bootloader menu,followed the instructions and finally fixed the problem and installed the right version.
but one thing that i DONT understand is why these beautiful roms are ONLY for CDMA version and not compatible with normal TP's???
thnx for the sharing of your experience with others