Hi Guys,
I got techno joy the other week and decided to get the G2 Touch from T Mobile.
i have been messing around with it and loaded CyanogenMod V1.4 + JF Recovery Image and then installed ModaCO rom, i then changed my mind again and installed cyanongenmod's rom after doing so i rebooted now i cant get passed the G2 Touch boot screen.
any ideas?
i have wiped it but still nothing.
thanks
sam
samhealey17 said:
Hi Guys,
I got techno joy the other week and decided to get the G2 Touch from T Mobile.
i have been messing around with it and loaded CyanogenMod V1.4 + JF Recovery Image and then installed ModaCO rom, i then changed my mind again and installed cyanongenmod's rom after doing so i rebooted now i cant get passed the G2 Touch boot screen.
any ideas?
i have wiped it but still nothing.
thanks
sam
Click to expand...
Click to collapse
Did you make a nandroid backup before starting? Can you get into the boot loader menu (hold home and turn phone on).
If you made a backup, try to restore it.
If not and you can get into the bootloader, flash modaco's latest rom.
If not to both, try the ruu which is HTC's official (near enough) rom and install from Windows
I'm pretty sure CM ROMs are only for dreams and magics for now,
so basically, just boot into recovery and flash MoDaCo.
Thanks for your replies guys. i tried the first couple of things you suggested but still no joy.
How do i flash the MoDaCo from recovery console? im guess i do the following:
1: download latest ROM from MoDaCo website
2: put update.zip on to sdcard
3: boot to recovery console
4: apply update.zip
have i missed anything? am i on the right path?
Thanks for your help again guys.
Yes, that's basically correct, though you don't need to rename to update.zip as the recovery console allows you to select any ZIP file on the root of the SD card.
Regards,
Dave
Related
Hi,
Due to HTC's special touches, the recovery image doesnt stay flashed, and on normal boot its flashed over (meaning if i try to go to recovery after a normal boot, i get the red triangle stuff, and have to pull the battery). I was wondering if this would potentially cause troubles if i was trying to flash a custom ROM from recovery? in other notes, i do find sometimes i have to pull the battery 4 or 5 times to get it to normally boot (thats without holding the buttons >.>).
Thanks in advance.
HTC HERO recovery image flashing problems
I am having exactly the same problem!
I did a quite a bit of research on how to root, backup and flash my HERO and every guide I found describes the process using Universal AndRoot + Rom Manager and it seems there should be no problems. I already rooted my phone successfully, installed Rom Manager and flashed either ClockworkMod 2.5.0.1 or RA Recovery 1.7.0.1 which are able to boot but only once. The next time I reboot I get the red triangle warning and it loads into stock recovery (by pressing vol_up + powroff buttons), so the custom recovery lasts only one boot cycle. I was able to backup but I don't want to risk to wipe and flash since there is a chance it might stuck in the bootscreen loop afterwards and I won't be able to do anything.
There is a thing with s-off and SPrecovery which helps to resolve the problem but it doesn't look like there is anything for HERO.
Any help would be appreciated.
ps I tried to manually flash recovery from inside the phone and from windows command line with the same result.
forum.cyanogenmod.com/topic/8182-how-to-root-your-hero
posted some similar comments over there, and the only init script that i can find when in recovery.
Yeah I posted my question there too.
I was able to find some information about the issue (he is talking about Villain ROM but I think it doesn't really matter):
pulser_g2:
Repeat the process again, as I think stock ROMs try and overwrite the recovery each time they boot. When you finish the process, immediately nandroid and flash VR12. That will then flash a new recovery, AmonRA 1.6.2a, and you will be sorted
Click to expand...
Click to collapse
So it looks like we should just go ahead and flash a custom rom which, in theory, will eliminate the problem.
yeah was tempted to just flash, but sending duck my system img for him to dissect anyway.
yeah worked fine, running cm6.1 now
Yeah once you root you have to flash a custom rom before reboot or u loose the root
I learnt it after lots of reboots and re roots.
but now I wanted to know if I could save the original rom which i have as nand backup to make as an update.zip like custom rom for safe keepimg
I flashed CM6.1 -based TastyFroyo 1.2 and I can confirm custom recovery stays flashed now.
Hey guys,
I am doing this rom flash for a mate of mine.
I am trying to flash the tastyginger rom, but i am having some real difficulties while flashing the rom.
He has a dutch htc hero from hi. He has the latest rom according to the update utility thingy. it is the 2.1-update1 version. i believe i've read something about nand locks, and i think his phone has exactly that. the first step to flash a new rom is to root the phone. Rooting the phone works, gives no errors.
But when i try to flash the recovery image, it says it cant find the flash_image file.
it is should be located in the system folder on the phone but it isn't. i've tried to install it with android sdk, but the thing just is really acting weird. htc sync isn't working with the phone. it says there isn't a phone in the usb.
Now to make it clear, can somebody give me a clear tutorial on how to flash the thing correctly? I've done this before on my hd2. i've flashed the cyanogen 2.6 rom to my phone.
have you tried rom manager to flash rom its the easiest way i know. the way i rooted was with universal androot apk then installed rom manager clicked on flash clockworkmod recovery then went to install rom from sd card in rom manager scrolled down to the rom i wanted to flash choice it and pressed ok i then select backup existing rom and wipe data and cache and pressed ok then it will ask reboot and install and press ok and let it do its thing then wait untill it reboots and it should of installed rom which you wait to boot should have a custom splash screen that comes up and wait until your prompted to input details and such. hope this helps.
hey, thanks for the advice.
i let him try this method, but when he chose the htc hero gsm to install the cwm, the app refused to install it and gave this error message:An error occured while attempting to run privileged commands.
I forget to mention that the method you posted, that we already tried it.
But thanks for the effort!
pretty certain this is the tut. i used, i also had to use the gold card method -.-;
http://forum.xda-developers.com/showthread.php?t=645253
rom manager has been down lately everyone has had trouble flashing clockwork recovery, but ra recovery second from bottom is a secondary choice however other features of rom manager might not work if you use this you will have to boot into recovery manually.you also need super user to use this as well.
http://zenthought.org/content/project/flashrec
Use this apk, i have always used this method!
Download clockwork or ra recovery rename it to recovery.img and copy to sdcard
Backup recovery with flashrec
then type sdcard/recovery.img
flash recovery and done!
I've done the recovery succesfully at the guys phone. It works bloody well. Thanks dudes! You can lock it up if you want to.
Sent from my HTC HD2 using Tapatalk
Hey All, I rooted tonight Via Revolutionary tool but now my phone won't boot.
Basically, I followed all the steps with the tool, Got root and Clockwork and installed the SU.
I rebooted and had a rooted phone.
I proceeded to install Rom Manager, and I backed up my Rom (Created a Nandroid backup I believe thats what it was).
I then downloaded CM7 (the latest one in the Rom Manager) and installed it.
The phone rebooted for about 10 minutes with that CM7 Boot animation looping. I took the battery out, held down the volume button and used Recovery to recover my nandroid backup from before.
Now I'm trying to reboot it and its stuck on the White screen with the HTC Logo just sitting there.
Really unsure what to do...
Edit: this is all kind of assuming you flashed the newest clockwork recovery after you d/l ROM manager ( version 5x of clockwork recovery)
Seeing as how your phone won't boot you will need an sdcard reader to do this. So assuming you have one or another phone with internet you can swap the card into:go [url="http://forum.xda-developers.com/showthread.php?t=1179386]here[/url] and download the clockwork recovery version 4.0.1.5 and place it on the root of the sdcard. (not in any folders) rename the file to PG05IMG.zip EXACTLY and put the sdcard back in the thunderbolt. Now hold volume down plus power Untill the bootloader screen appears. (you may have to select bootloader from the list with the volume rocker and tap the power button to select it) once in the bootloader give it a minute and it will find the file and ask you to press volume up to update. Do it. When its done select reboot and then boot back into the bootloader and choose recovery. Now try restoring your backup. It should.work now. The problem is Clockwork recovery version 5.x is having issues right now with restoring backups.
Sent from my HTC Thunderbolt
Original problem of OP's CM7 install bootlooping was because he didn't wipe data/cache.
As for the white HTC screen it's hanging after restoring for some reason. People have reported this with CWR5 (if that's what you have) but I have been unable to reproduce it as of yet.
That said, it's probably only preventing that restore from booting. You should still be able to boot to hboot (pwr+VolDwn from an off state) and then select recovery at which point you can wipe data/cache and flash something from your sdcard. If you don't want to mess with an adapter to put something on your sdcard, you should still have CM7 on there. You said you used RomManager to download it so it should be in /sdcard/clockworkmod/download when you want to flash it.
Thanks so much! Since I couldn't get a quick response, I used an RUU and went back to complete stock S-OFF. Could you relink the clockwork recovery earlier version please? That link isn't working for me for some reason.
Thanks so much!!!!!!
JBO1018 said:
Edit: this is all kind of assuming you flashed the newest ( version 5x of.clockwork recovery)
Seeing as how your phone won't boot you will need an sdcard reader to do this. So assuming you have one or another phone with internet you can swap the card into:go [url="http://forum.xda-developers.com/showthread.php?t=1179386]here[/url] and download the clockwork recovery version 4.0.1.5 and place it on the root of the sdcard. (not in any folders) rename the file to PG05IMG.zip EXACTLY and put the sdcard back in the thunderbolt. Now hold volume down plus power Untill the bootloader screen appears. (you may have to select bootloader from the list with the volume rocker and tap the power button to select it) once in the bootloader give it a minute and it will find the file and ask you to press volume up to update. Do it. When its done select reboot and then boot back into the bootloader and choose recovery. Now try restoring your backup. It should.work now. The problem is Clockwork recovery version 5.x is having issues right now with restoring backups.
Sent from my HTC Thunderbolt
Click to expand...
Click to collapse
^^^^^ Follow this to the T and you should be golden. Same thing was happening to me the other night and it all started after I updated to CWM 5.0.1.0
On another note after that debacle I switched to the unofficial TeamWin Recovery and have yet to have an issue. If you're interested you can flash it the same exact way as mentioned in the previous post but download the file from Rootzwiki
http://rootzwiki.com/showthread.php...ery-Project-for-Thunderbolt-(8-8-1.0.3-rbox.2
OK. so let me update yall.
I installed the latest version of clockwork, before yes, and it F'ed me up with the looping bootloader.
I installed the older version of CW recovery, renamed it and flashed it with Hboot.
My Flashes now are all 100% not looping and booting perfectly.
Thanks all!
Double check the backup files. i had a similar issue and noticed the files were backed up as .zip instead of .img. You will probably need to install another rom through clockwork.
GMac0051 said:
Double check the backup files. i had a similar issue and noticed the files were backed up as .zip instead of .img. You will probably need to install another rom through clockwork.
Click to expand...
Click to collapse
His problem with restoring the backup should be fixed now. Koush released CWR 5.0.2.1 which should have fixed the ext3 problem with sense roms.
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Mphill46 said:
Hello all I am new to this whole rooting process... I am not afraid to admit it as we all were once new at what we are doing at some point. I need help creating a nandroid back up on my atrix. O have successfully unlocked the boot loader and rooted my phone. I performed a backup using cwm through the boot screen and then I proceeded to wipe all my data and install a new rom when to my surprise it got stuck on the boot load screen for 30minites before I pulled the battery and tried restoring to my backup that I made with cwm.. it appears that the backup only successfully installed the boatload.img file and none of the other. Img files therefore once rebooted my phone would stay stuck at the boatload screen... I finally wiped everything and found a gingerbread 2.3.4 version 4.5 beta and copied it to my external sd card and installed it through cwm choosing the zip file to install and rebooting. Now I am back up and running but I do obviously not know how to make a nandroid backup so if I decide to tinker around with my phone again I will not have the same problem as before. Any help would be greatly appreciated... I am sorry this is so long bit if someone helps me I would rather they know the whole story then just portions of it. Thanks everyone who reads this and replies!!!
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
try RomRacer's CWM Recovery in the development forum instead.
Thanks I will look into that! Thanks for your response.
Sent from my MB860 using XDA App
Looked into rom racer's forum page still confused
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Mphill46 said:
Hello again, I have looked into the forum for "romracer" and there is still quite a bit of confusion on my side (noob). I am already nervous about flashing things to my phone since my last stuck in boot loading screen. My current version of cwm is whatever came with option number 2 on the automatic unlock file that unlocked my bootloader and also provided root access. I believe it is called "Tenfar CWM". I want to be able to make a successful nandroid backup and I am understanding that I need to flash the latest version of CWM for atrix. I am confused about how I go about flashing that onto my phone safely. I am sorry I am such a noob, but I want to understand how to get the latest version of CWM for atrix onto my phone... There are so many links to different things on the developer for CWM forum page that my mind is spinning out of control. Any help on where to download all the necessary files to perform this flash and how to flash my phone with the latest version of CWM for atrix 4G would be greatly appreciated. Thanks for being understanding and helping me through this process that seems overwhelming for a noob like me.
Thanks,
A fellow Atrix 4G owner who switched from iPhone to have the freedom to change what I want
Click to expand...
Click to collapse
1) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
2) Download which every color of Rom Racer's CWM you want to your pc (same folder as fastboot files).
3) Boot into fastboot mode and enter fastboot mode.
4) Connect phone to pc, and open command prompt from fastboot folder (shift + right click -> open command window here).
5) Enter fastboot commands from Rom Racer's OP.
6) Enter "fastboot reboot" to reboot phone.
7) Boot into recovery and make sure it worked
*If you still see Tenfar's recovery app on your phone, delete it like you do any other app.
OR
1) Delete Tenfar's Recovery app.
2) Go to /system/etc. and delete "install-recovery.sh". This can be done with Root Explorer, available from the market. If it's not there, then don't worry about it.
3) Download ROM Manager from the market (free)
4) Install the CWM Recovery for the Atrix via the ROM Manager App.
5) Use this CWM Recovery
or proceed to install ROM Racer's CWM Recovery...
6) Download ROM Racer's CWM and put it on your internal SD card (/sd-card).
7) Open ROM Manger App
8) Select install ROM from .zip (or something like that - one of the main options).
9) Select the .zip you put there, an uncheck the options (no need to wipe anything).
10) Phone will reboot, install the .zip, and reboot again.
11) Should have ROM Racer's version on the phone now, and be able to enter recovery via the ROM Manager App.
Thank you so much... I will try that once I have some time to dedicate strictly to this...
Sent from my MB860 using XDA App
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
LifeOfALegend said:
Right guys I've got a nabi 2 which I was trying to update, I finally got onto jellybean but forgot to flash the bootloader, I have it in my sd card but the nabi won't boot normally or into recovery to flash the jellybean bootloader, I can navigate to fastboot etc... But it just hangs at the menu when I sselect recovery kernel. Any ideas at all are appriciated thanks
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
aicjofs said:
Look here http://forum.xda-developers.com/showpost.php?p=53557529&postcount=2302
Follow the first link and download NABI2RESIZE. Extract that.
Then in second link download hawkcore.zip and run that bat file.
You will need to setup APX driver.
Click to expand...
Click to collapse
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
LifeOfALegend said:
Right I have got it to boot onto recovery and installed the jellybean bootloader, but now it only boots when I go to recovery abd boot as normal, also when I try to charge it when on it freezes the whole tablet and charges very slowly. Also when I am in recovery and I went to wipe Calvin cache and data it comes up "are you sure, no OS installed" and then when I do wipe it it's says successful but also unable to mount e/ data, no file or folder found. I am also unable to mount the sd card? Sorry for the long post but I wanted to get all the problems in, thanks fir all your help
Click to expand...
Click to collapse
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
aicjofs said:
So you have the ICS bootloader installed if you followed what I said above. You have to use the ICS TWRP. Use that version to do the procedure you first started with. Restore version 2.3 system, boot and addon, then before reboot the Jellybean bootloader.
Sorry for slow response out of town this weekend.
Click to expand...
Click to collapse
Finally got sorted, just needed to flash twrp 2.3.6, and the issue with charging was just a charger that nabi sent out as a replacement. So all is good, thanks for all the help