Hey, i see, there is some einsteins, so please help me.
I have an iPAQ 6815, with a broken usb connector, i only use for charge the battery..
I downloaded airey's WM 6.5, it's upgraded my bootloader to 1.0.5, and i cant downgrade... ( i have broken usb connector..) I can't upgrade my rom, to newest versions.. I uploaded .nb0 files to the mmc, but 5-6 mins, and the phone is restart, with airey-s ultimate rom.. (the older)
Anyone can help me please?
Thy.
The 8-th rom, when i was tested, and it was works 6.1 rom, and i hope, this rom is not eat the battery
Does it the first time that you use this memory card to downgrade ??
Because with some cards, it doesn't work...
So, i want to ask a question. I can downgrade the bootloader with mmc?
Related
hello every1, i am not very much into winmobile, i am symbian freak for a very long time.
in symbian there is no possibility to flash bricket device at home, ant that is spwcialy what i like at winmobile
i have htc cingular 8525 and it was running wm5.
rgbw string:
HERM100
IPL-1.04
HREM100
SPL-2.10.Olipro
and iv tryed to upgrade it to wm6. it stoped on 11% at image writing on ROM, and give me error 262. i remove battery, wait, plug back.... and it started to write again. and stoped on 11% again.
so iv changed pc(go to my friend), and same thing again.
iv even changed cable(from nokia 6120c hehehehe) nothing works
my ROM is deleted and i only have RGBW screen(bootloader)
is there any possibility to boot my device? form mmc???? anything? i am runing activesync 4.5.0
iv readed a lot of tuts, but ne1 helped me.
i hope that someone solved this problem.
thanx in advance
wook
[email protected]
It sounds like your radio has been stuffed... This is BAD...
First, try to flash a stock carrier rom(preferably your original carrier rom) and see if it goes past the 10-15% mark. If not you can try to flash a Radio only rom.
The best way, since it reset into bootloader anyway & (good onya) you have Hard SPL installed, is to use the sd card method.
1. Format sd card fat32.
2. Copy the .nbh file of the os/radio rom you want load Hermes onto sd card and rename to "Hermimg.nbh".
3. Put sd card in Hermes and reset. Follow prompts...
Make sure you have a charged battery as it is pretty battery draining (especially multiple flashes).
If you can't get the radio rom on, you can AT LEAST install a new OS only rom. It will be a good PDA BUT won't work as a phone anymore...
Good Luck...
thank you for reply.
my device do not reboot in bootloader. it stays there. only that RGBW screen for ever.
i was testing it wht plug-unplug usb, and it allways show me if it is serial or usb.... that means that system is functioning.
i try to bootup wht mmc fat, and it didnt work
tell me what files do i need to transfer to mmc? do i need to change name of RUU.....exe to stg else or just nbh thing?
and in what location on mmc should i save it? or just in mmc:\ (root)
and can i hack my radiorom after i setup system? or i need to do that before?
thanx again
btw i am poweruser of symbian, and i am proud owner of smallest s60v3 device (6120).
i found on it samsungs processor.... and i belive that it is similar as windows mobile. and we have a lot of troubles wht rom upgrading... is there any possibility to include you guys in symbian ROM moding? it would be gr8 bcs i didnt cee much skilled developers for windows XP in symbian freak community
btw some guy just told me that he has some java application which enabling write on ROM and if he say truth he will share it wht me.
he is pc/phone servicer, and he is really good as far as i know.
if this thing exists, is there any possibility to extract RUU from exe to pc and i would copy/paste every single file(wht some changes) as i want to do to my nokia hehehehehehehe
wook
"my device do not reboot in bootloader. it stays there. only that RGBW screen for ever." - THIS IS BOOTLOADER...
On the screen it should say what IPL and SPL you have, What are they?
2. Copy the RUU_signed.nbh file of the os/radio rom you want load Hermes onto sd card and rename to "Hermimg.nbh". You can use a radio only rom or a stock carrier rom - after flashing carrier rom and if the radio rom is restored then flash radio of your choice.
As for running windows on a symbian phone, I don't really know but I'd think that it wouldn't work as the symbian os may have hard wired drivers in the device. You'd have to ask some-one else in the know....
Cheers....
ultramag, iv posted spl and ipl version in 1st post
btw i didnt think abt runing winmob on symbian device, i was thinking of making RUU for symbian.
while RUU is rar file, we could make one for symbian, and bricket phones wouldnt be needed to send to service. btw we could then deit rom and remove platsecurity and make symbiansigned useless. then wount be any need for ROMpatching...(it pach ram actualy) all we need is drivers for symbian device and that we dont have
bt smthing will come i am working on clocking my 6120c and so far no sucess
btw, thank you for help, i am going to load mmc tonight (16:42 here)
ultramag69 thank you my friend for suport. iv successifuly get up my system
heheheehehehehe
btw i dont have imei info and Radio Rom version
i think that i should use CID and SIM unlocker?
As I said on the 2nd post, Your radio rom may be stuffed. This could mean its an unfixable brick. You can use the PDA functions BUT you may not be able to restore the Phone functions.
Using the sd card method though, you can try to install a radio only rom (this only tries to install the radio, the OS you have on there will remain the same so even if the radio rom install is unsuccessful you can still use the PDA functions).
You should also try to install a carrier stock rom (rom supplied by your original carrier) as this , on rare occasions, has restored the radio rom.
Good luck in your Endeavour..
Cheers...
i will try to run radioROM.cab from mmc. seems like stg is wron wht my usb cable. it cant get synced wht pc....?
i will veawe its hardware and check "all" tngs from usb to rom and to flash, at least till crystalls
btw this platiform is awsome
wht resco i can edit rom files??? whd i am amased
i just need paint and hex editor
and ill make anything
btw is there any dll exe... decompilers??? and i need to check is there python for wm6
and then ill be able to write my own programs
thanx bro again
You have bricked hardware radio - flashing radio rom wouldn't work. Send it to good service and probably they will repair it.
hmmm, i would sen it right now, but there is no service around...., and i am better in hardware and software more than 75% local servicists....ill gess tht ill figure stg
ppl, i am wondering:
why memory card is displayed in "device:\" as folder? as far as i know it is a disk(fat32) and why i have extended_ROM and option to remove it?
why i cand access to orginal ROM drive? and why winm0b is playing wht virtual drives?
offtopic:
does any1 has experience wht pythonCE? and if there is ziped command samples for pythons compiled library? i would like to get it
Thank you
wook
It is not clear if you fixed your phone.
It does not sound like you have followed ultramag69 instructions very well. Probably because Englsih is not your first tongue and you have little knowledge of PPC.
You need to download a Radio ROM here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Then follow the instructions here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
A few points that you need to understand. Resco can not edit ROM files. Your Hermes does not use a MMC card it uses MicroSD. If you are connected to ActiveSync then your Storage Card shows up as a folder; that's just the way it is! Pretty much all your other questions are answered in the WIKI here: http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
Hi,
I have a MWG AtomLife running windows mobile v6 i have been trying to install version 6.1 using DSUU.
I get 1 of 2 problems using 2 different version of 6.1 the first problem is
Everything starts off fine, phone softresets but it boots into windows and the DSUU says it failed to connect. No damage to phone.
the seconed problem is it says the country region (or somthing along thoses lines) is wrong and its not compatible with my phone.
I would just like to point out this is MWG not a 02 i got this phone from Portix (the uk disti for MWG) 2 days ago.
Any advice is muchly appricated as i said i have read the wiki, every post i can find on it all the how-tos in the various version but to no avail.
Thanks
FL1X (not fl1c i typod while creating my username how annoyingly rookie of me)
PS> this is the version of 6.1 i was trying to install (using the inbuilt installer and also "pcinstaller1.zip" from another thread) http://forum.xda-developers.com/showthread.php?t=413950 I know it says Exec so i tried this one http://forum.xda-developers.com/showthread.php?t=360664 again to no avail.
Update: just tried http://forum.xda-developers.com/showpost.php?p=2433912&postcount=112 again same problem of the phone softresetting and booting back up loseing connection failing to install.
Hi, if you want to upgrade to WinMo 6.1then you cannot upgrade via DSUU. It is not possible till a DSUU is developed.
For upgrading you would need to use the SD card. Procedure is given in the last link you had visited.
P.S. Do not use ATOM Exec and HP update utilities on Atom Life. You might brick it.
Thanks Maniac, i will look into doing it that way over the weekend, in the event i brick it how can i return it back to the original version of wm6?
'brick it' means ur phone is dead. the term is kind of a metaphor. u can use ur phone as a brick
I have an Imate jamin.. and i installed wm6.1.. everything was goin good..but lately i installed and other rom on it and now it doesnt go forward... it is stuck on the start screen... i need help!!!
Hey,
First try an hard reset, this can be done with pushing the _commmenager-button+Camera-button+stylus-reset(on bottom of ur device)_ at the same time, just release the stylus-reset some earlyer then the other 2 buttons.
if thats not working:
Try to charge your mobile with your original charger,
Then go to your bootloader, put in the USB Cable.
goto the site of your brand of phone... imate / qtek or whatelse...
download official WM5 ROM.
try to flash it again.
Also flash your radio rom to 02.19.21
I like 02.19.21, i think its the best radio-rom for prophet i ever used.
but that can be because i have Vodafone, dont know if its also the same with your provider...
but i should say, give it an try!
here you can download all Radio-Roms.
First of all, when u start flashing again to WM5/6 (doesn't matter what rom) always use HARD-SPL!
And i can advice you an good rom(although for me in case)
The rom made by VaranusVincent
ROM Prophet Blue Manilla 2d
Have fun!!
whoops doublepost...
Hello,
i tryed to upgrade my ROM to an other Version. For this i istalled the hard spl. I think i did something wrong brcause after this, my micro don´t work :-(
Any Ideas??? Because i can´t send it to o2 with a modified ROM.
Thanks!!
Basti
Help please!
I have an T-Mobile Ameo (also known Athena X7500) and i tried the Olipro Unlocker, but the installation didnt finish, at 59% stopped. After that i turn off the device, then turn on, but my device still have a 4 colour screen,red, green, blue and white, it doesnt boot the Windows Mobile, just have the installation screen...
please help
Use olipro's tool again and then flash your final ROM
i tried it many times, but since than my Athena X7500 was dead, the Olipros unlocker doesnt work. The program said: "The Update Utility cannot connect your PDA phone"
In bootloader (coloured screen), does it say anything? if so what? when you try to flash a rom or use unlocker do you get a code? is your memory card out of the slot?
I took a photo my bootloader (coloured) screen:
http://kepfeltoltes.pirateclub.hu/pics/20090106317.jpg My device doesnt say anything.
When i used the unlocker, i didnt got any code. And my memory card was in the slot.
I also took a photo what the Olipro's said now, if i try to continous the flashing:
http://kepfeltoltes.pirateclub.hu/pics/20090106319.jpg
Have you tried flashing your carrier's original Rom?
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Thanks a lot, my athena is live again, i flash my original rom!!!
But the Olipros Unlockert isnt working, the installation go to 100%, the program said that the flashing is succesfull, but my SPL is still 1.1, and i cant flash any roms..
I can understand why. Any ideas?
The other thread was closed, you shouldn't double post.
Read the links I mentioned.
as in olis first post
"Please note: you must have .net Framework 2.0 installed with the services packs, if you don't it then it probably won't run till you download it.
SPECIAL INFO ABOUT STEP 2: When you run this step, first your device will be flashed; this is NOT the end of Step 2, you must then configure your device and set it up fully so you can access the menus etc (there will be a prompt to ask you to do this after the flash anyway). then you will be able to continue. please make sure to read ALL dialogs fully"
leave out the sim and sd card.
Some others have reported better luck with the shipped WM6 rom if they had trouble unlocking.
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
VorosAdam said:
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
Click to expand...
Click to collapse
the net framework should be on your computer.
what OS is on your computer ?
May be better if you use winXP
did you install an oficial wm6 rom ?
Read the later pages in the unlocker thread
My computer also have the NET Framework 2.0 SP2. And when the flashing didn't work, i also installed the NET Framework 3.5 SP1, but, when i flashing a ROM in my decive, it also went to 100%, but the SPL is still 1.1.
I use a 32-bit Windows XP in my computer.
My T-Mobile Ameo (Athena) is a second hand device, it was used when i bought. But the first user said me, that the original OS was the Windows Mobile 5 in my Athena, but he update from Windows Mobile 5 to Windows Mobile 6.0. He said that he update with an official T-Mobile way.
Ok all good so far
Did you use the unlocker from this thread?
http://forum.xda-developers.com/showthread.php?t=315831
The other thought i had was that you should try a different computer and usb cable
oh, thank you so mutch, i tried an another computer, and it flashed the SPL from 1.1 to 1.2!
thanks again
my htc advantaage x7500
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
sheizi said:
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
Click to expand...
Click to collapse
I saw someone with the same problem as you here awhile back and he was able to fix it. So keep your post alive or read the sticky post under the Upgrade section. I believe that was where I read it.
dead X7500
Hey Im also a sufferer of a dead X7500......this all happened wen I was trying to flash my ROM which was using a SPL !.20 OLIPRO
wen I try to re flash the device , it starts a stops at 1% and follows an error msg !
plzzzzzzzzzzzz help me out to solve this prob !
regards!
VorosAdam said:
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Click to expand...
Click to collapse
I have the same problem would be kind and tell me how you solved the problem.
[email protected]