Hey everyone, i've managed to somehow crack my touchscreen, so i've wipped it open today and i've taken the screen out,
I am wondering will this touch screen work for me?
http://cgi.ebay.co.uk/LCD-Touch-Scr...s_RL?hash=item56334071e8&_trksid=p3286.c0.m14
The seller says that i have to have a black ribbon on my MDA Vario, however mine is orange.
Thanks very much.
Exe
Related
Hi,
i bought a used mda via ebay and got it yesterday.
First thing i noticed was that the touchscreen didnt work right... i somhow managed to get through the calibration tool that poops up if i turn the device on. After that the touchscreen worked really good for 1 day and then suddenly it stopped working completely...
Anyone had this problem before and can give me some advice ?? I already got a 20e refund but i want to try to repair the device instead of selling it as broken.
And another question i have: Can i use the wm 2003se on a german device ??
Thank you
Seraptin
Edit: got it repaired myself... I opened the device and cleaned everything... there is still some dirt between the glass and the screen.. if anyone knows how to remove the glass to clean that, im listening But i dont think thats possible anyway.
my screen is broken
Hi,
Glad to read that you have repaired it yourself. I just dropped mine on the floor yesterday and the screen is broken. Touch screen still works but the screen is cracked and I can see a black spot. I wish someone can help me purchase a new screen. I would try to install it myself.
polar20
i need urgent help please my spv m3100 aka htc hermes was getting white screen few times the problem got worst and now it's booting up on white screen and i have open it to see the fault and i think is the dpad cause when i press a surface mount chip on the d-pad somethines the screen comes normal where i can found that dpad pcb i think i saw one on cnn.cn but it different to my d-pad can any one help me out please ! thanks
If I understand correctly you want to buy a new keypad..
cnn seemed to have both types.. look under 8252 section for one and tytn section for the other.. is that what you are after?
On my UK M3100 I'd need this one for example: http://cnn.cn/shop/cingular-8525htc-hermes-outside-keypad-p-1610.html
i need the pcb for keypad sometime called keypad membrane too
Does this keypad mebrane fit to my orange Spv m3100 Aka hermes please ??
http://cnn.cn/shop/tytnsoftbank-x01ht-front-keyboard-p-1553.html
white screen
did you solve the white screen with a new keypad? my spv3100 bugs me very often and I cant do nothing.
hi guys,
quick question.
ive just replaced my dopod838pro housing and upon completion, WM6 wont auto-rotate. where have i gone wrong?? is it something to do with the little square of yellow plastic???
please help
thanks,
Drooch
also
the screen backlight sensor wont work either.
ive done a hard-reset, changed the yellow plastic to the original plastic from the OEM housing. all the connections are firmly connected and i am still suffering from
- no auto-rotate when sliding device
- keyboard backlight wont activate
please help as i dont want to send it 1500Km to get it fixed (outside of warrenty as well!)
Drooch
Did u solve your problem? I have the same problem with you
Solution
I recently ran into the same problem swapping to a new housing. As it turns out the housing I bought did not come with the magnet needed for the phone to recognize that the keyboard had been slid out. Just take the magnet from the old housing and attach it to the new housing. See the below link for pictures.
http://forum.xda-developers.com/showthread.php?t=332035&highlight=magnet
drooch said:
hi guys,
quick question.
ive just replaced my dopod838pro housing and upon completion, WM6 wont auto-rotate. where have i gone wrong?? is it something to do with the little square of yellow plastic???
please help
thanks,
Drooch
Click to expand...
Click to collapse
Hello I have an HTC Touch Dual (Nike) running Orange UK rom. The phone is in full working order, wich i confirmed with the mymobiler software. The only problem is that the screen is completely black, well you can see some light. My question is how do you know if it is an LCD problem or a flex cable problem without trying on another device.
If you didnt drop device, i don't see any reason why LCD screen will die, it's kinda strong thing.
Well i replaced the screen, and the problem continues!
Hi,
I've tried a number of firmwares Europe/Asian/T-Mobile and my local Telstra Rom. But no success.
I replaced my smashed digitizer and LCD the other day, however everything works great, the touch response is inverted - Left to Right. All touches on the left side are responding as if I'm touching the right side of the screen. Everything in the middle is fine obviously but from there it's mirrored.
It's quite possible that because the digitizer was bought from the USA and its in a Telstra (T8697) phone, it's somehow incompatible.
By bootloader is stating the TOUCH is C1(v66)
Does anyone think they may have a solution to this? a Registry edit or some kind of Screen calibration?
Cheers for any help.
BTW - The digitizer capacitive buttons are also mirrored i.e. Back is Search and Search is Back.
This digitizer also has a circle around the Windows (Start) button. My old screen didn't have this..
same problem
Hi gauge41,
I have the same problem :crying:. Do you have a solution ?
I bought my touchscreen on uk by ebay.
Reference:
cgi.ebay.fr/NEW-DIGITIZER-TOUCH-SCREEN-LENS-FOR-HTC-7-MOZART-T8698?item=270791784120&cmd=ViewItem&_trksid=p5197.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3DLVI%26ps%3D63%26clkid%3D5080495740069852992
All updates have been done through Zune software without changes.
Best regards.
gauge41 said:
Hi,
I've tried a number of firmwares Europe/Asian/T-Mobile and my local Telstra Rom. But no success.
I replaced my smashed digitizer and LCD the other day, however everything works great, the touch response is inverted - Left to Right. All touches on the left side are responding as if I'm touching the right side of the screen. Everything in the middle is fine obviously but from there it's mirrored.
It's quite possible that because the digitizer was bought from the USA and its in a Telstra (T8697) phone, it's somehow incompatible.
By bootloader is stating the TOUCH is C1(v66)
Does anyone think they may have a solution to this? a Registry edit or some kind of Screen calibration?
Cheers for any help.
BTW - The digitizer capacitive buttons are also mirrored i.e. Back is Search and Search is Back.
This digitizer also has a circle around the Windows (Start) button. My old screen didn't have this..
Click to expand...
Click to collapse
I've read somewhere, that there are two modifications of a touchscreen for mozart and they are not compatible, so if your previous digitizer didn't have a circle around windows button, but new one does, mirrored input is definitely because of that. Haven't heard of any registry tweaks to fix that, and I don't think you can fix it by installing different rom. You should probably get a compatible digitizer replacement or try installing different touch screen drivers.