any body please help e j have flash my gene with ruu_gene_htc_asia_india_1.17.720.1_4.1.13.34_02.7.9.90 ship exe and after100% my phone is not getting on
any bodyplease helpme how can i enter in boot mode
Did you read this
To enter boot loader mode, press and hold the camera key and press reset.
sir thanks for repy i have never read your post before that and did the same mistake i have flashed with the wrong file and now my habdset in not going in boot mode too
thank you
please help me out what shopuld i do
kripalu said:
sir thanks for repy i have never read your post before that and did the same mistake i have flashed with the wrong file and now my habdset in not going in boot mode too
thank you
please help me out what shopuld i do
Click to expand...
Click to collapse
HTC SERVICE CENTER
if it is in warranty period ..no BUCKS!!!
kripalu said:
sir thanks for repy i have never read your post before that and did the same mistake i have flashed with the wrong file and now my habdset in not going in boot mode too
thank you
please help me out what shopuld i do
Click to expand...
Click to collapse
Before taking it to service center, you may give a last try by pressing and holding camera and power buttons and then using stylus to reset the phone. That had worked for me.
Gene100 problem
Hi Member's...
Having Gene 100
In boot Loader Mode is showing
ONBL 1.07.0000
SPL 1.07.0000
while starting in soft reset mode It shows Htc spash screen with
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.71.90
i goes blink...
well tried to update the rom with "P3400 - 24 March 2007.exe(HTC_wwe)
getting update successfully, but still in same problem..
nothing get changes...
pls help me out...
thanks a lot....
Related
hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
you mast flash with bootloader this rom
http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html
and then you can flash any rom
Ok thanks for reply ;-)
I test it ...
:-(
I download this ROM, but it is not functional :-(.
Same problem Device has reboot on 4% flash process :-( :-(.
Any ideas ??? Pls
i have your problem and when i flash, all rom stopped 4%, because are rom cocking. the only one that no stopped was http://rapidshare.de/files/38259115/RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe.html. try again.
when stopped 4% what error appear?
error code
:-( I try flash ROM from you, but same problem. Just i Flash ROM: RUU_Oxygen_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
Flashing process is without a problems, but on 4% my oxygen reboot...
And flash utility write: ERROR [294]: INVALID VENDER ID
I dont know how next, thx for reply...
Hi Jurig
What did you do?
I have the same problem!!
Hard Spl Not Work
You must make hardSPL part boot and not install another version of Statistics is not compatible with HTC Oxygen.Y have 1.005.0000 SPL means that no longer kent install another rum. If you folow carefully written and why not install all the rrom with the SPL and OS but only the bone y had not separate that issue. The only solute is imei-check.co.uk order to unlock part of boothloader and will save the phone.
Thanks Geo 2000
How can I make Hard SPL? The phone is HALTED on splash screen!
I can't synchronise with PC so I can't copy anything to phone memory.
The only thing I can do is entering BOOTLOADER by pressing camera and power buttons.
(I have SPL 1.70.0000)
Thanks friends
There had to install the archive with the bone and spl.Had to extract with Nbextract.exe and Htcrt.exe to recover rom only with the bone. had to do with the first date HardSPL method posted here: http://forum.xda-developers.com/showthread.php?t=340283 after those install rom respectively.Yf no longer open Windows no longer can repair only by sal the program from imei-check.co.uk. good luck
jurig said:
I have problem :-(, my S310 is death.
I turn on S310, but his freezes on Microsoft Logo... :-(.
I try flash other ROM over bootloader, but flash stoped on 4% and S310 rebooted...
In S310 is ONBL: 1.05.0000, SPL: 1.05.0000, Oxygen 1U.
My Oxygen is HTC S310.
Anybody have any ideas ??
PS lease excusive me for my bad english.
Click to expand...
Click to collapse
Try to make hard-reset..
How to do the Hard Reset?
Please help...
My Oxy is halted on HTC logo splash screen...
RA
abramq said:
Please help...
Click to expand...
Click to collapse
Press and keep two top soft-keys. Press "Power".
Wait (keep two top soft-keys!) until message "Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Reyter said:
"Press 0 to restore factory default, Other keys to quit" on screen.
Release soft-keys. Press "0"
Click to expand...
Click to collapse
Oh, thans, but... there is: "Press Send key to restore..."
Where is the "Send" key? (pressing "0" doesn't help)
Probably death of my good Oxy...:-((
RA
send key is your dial number key
nemphis said:
send key is your dial number key
Click to expand...
Click to collapse
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Press "Green" button
abramq said:
Thanks a lot!
Any way...still frozen on splash HTC logo...
RA
Click to expand...
Click to collapse
What SPL are you? IF YOU DO NOT 7.77.7777 and 1.05.0000 MAY CANT NOT DO NOTHING. If you 7.77.7777 May settled once rom.not matter which of them install only itself to be part of the bone
SOLVED)
Thanks to good man it is ok now
http://forum.xda-developers.com/showthread.php?t=391602&page=4
RA
Not Solved for me!
I downloaded that "Russian signed" rom and tryed to flash my Orange SPV C100 (equivalen to Htc Oxygen): Same problem, the operation failed and the phone restarts at 4%
(My SPL version is 1.07.0000)
hi guys..
i hav a gene 100 or a p3400..
it went dead two days back as i was listening to music..i charged it up again but it just didnt start.. When i press the power button, the green light lights up and nothing else happens...
PLLLLSSSSS help......
gene
the gene doesnt even repond to the resets mentioned in the forum..
pls help me with any software or smthing..
plsss...
dead GENE- TRY THIS
We can hard reset the device just by pressing and holding both the " -" keys right above the answer and end keys and pressing the power button . It will run the ghost image and recover the device ...
note :
1) make sure your battery is more than 50 % charged .
2)you must do a power cycle in your device ( take out the battery , then press and hold the power button ) before you do a hard reset ...
My device is back to normal...
video is here
there you go http://www.youtube.com/watch?v=R53104JTgNI
Tried it once...
hi bryan..
thnkx for ya reply but i'v already done that but got no responce..
Can i fix it by flashing or smthin??.. i'm new to these things ...
Can you explain to me ... to what extend the device is screwd.....
Another P3400i bricked
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
its isnt startin up
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
shahabaz said:
hi bryan..
Once i put he batery and switch the device on,the green led lightsup and staysthere until i remove the battery..( all this tym the device screen is black..)
the red led lights up when i connect it to my pc..
What are my options??..
Click to expand...
Click to collapse
Your battery is finished. I started getting that when my charger got messed up and starts taking power out of the battery instead of putting it in. Take out the battery,put it back in, then plug it to your PC and leave it there for a while.
mailforkrishna said:
I tried olipro spl on my p3400i and the screen went black.
later on i managed to get it to bootloader mode showing Olipro spl but unable to flash any rom everytime i have same error 300 'get newer update utility '
i tried mtty,htcflasher,hard reset without powering on but nothing works.
phone is stuck at bootloader screen .
help please
Click to expand...
Click to collapse
If your s\n starts with 814 - there is no solution now
Daemon_Hell said:
If your s\n starts with 814 - there is no solution now
Click to expand...
Click to collapse
no it is HT816FW01645 is there any hope
i have the same
my ht807
is it repaired ?
the same problem for me.
s/n start with HT829
any solution to recover?
to all p3400i guys
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
go4thoman said:
you can do nothing.... i am also having the same problem..... only solution take it to a service centre and tell them to hard flash and reinstall the windows..... my p3400i is in the service centre right now... we cant flash p3400i .... i dont know why???
Click to expand...
Click to collapse
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
mailforkrishna said:
I too had taken my P3400i to service center but they did no solution Motherboard has be changed ??
and it cost 75%of a new P3400i
Click to expand...
Click to collapse
try to hard reset it and get the boot loader and flash with it the stock rom for p3400i i will give the link soon. my friend did it for me. then i send it to bangloure service centre, now waiting for their reply. They said that if we try to flash it our warranty will be void..... dont know what to do now.......
GENE 100 dead (stuck on bootloader)
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
If you have not completed 14 days after buying the device, just take it to HTC service center sying that your device is not booting. At least in my case, those guys couldn't figure out what is the cause (see how efficient they are ) and I got a replacement !
basha said:
Same with me
After running orefcove gene hspl my gene is dead and It goes up to tricolor bootloader and hangs. Cannot do any rom upgrades (ERROR- invalid upgrade tool)
Now SPL is 1.10.Olip
Orefcove HSPL
http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37
(please dont use this and you will end up with dead gene like mines)
I have Gene 100
S/N HT817
Click to expand...
Click to collapse
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
mGforCe said:
I used the exact same HSPL ... and was able to upgrade to WM 6.1 ROM by cyan..
Click to expand...
Click to collapse
What is your serial, is it P3400i
basha said:
What is your serial, is it P3400i
Click to expand...
Click to collapse
Nope... its P3400 which came with WM 5.
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
First try to remove the battery and then put it back in and try to switch it on see if it boots into the windows...if not then follow the step given below...
Download any custom rom for OLD gene and run the rom update utility (RUU) it will be back to normal...
Note : Most importantly don't panic ...even if the phone is taking its usual time to boot up it may seem longer cos we are worried....have patience...
hay man
tell us the serial number of your device to tell you exactly what to do
is it (ht8xxx) or (ht7xxx) ?
it is very important
and for god's sake guys read the sticky threads first.
do not do anything before getting answers from other members.
Thanks guys, but I solve it already but I am not able to download any rom for my gene.
Can somebody give me another mirror apart from rapidshare and megaupload............. and which ROM is good, like with cube for my gene HTC 3400?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
Its normal thing that ur device got off after hspl.exe
it seems like u hv new gene....so now u should use Oref unbricker...
u just followed step 1....
so u should move on to step 2
which is unbricking gene by oref method
http://forum.xda-developers.com/showthread.php?t=472169
read this bro n follow instructions...
Thank you once again but I have solved my problem already. Now all I need is a new rom for my old gene.
Could anyone give me alternative mirror for any rom? Rapidshare and megaupload is not working for me.
Help - Gene stuck at boot loader after upgrading ROM 6.5
ONBL 1.07.0000
SPL 1.07.olip
GSM 02.79.90
OS 1.7.0.0
This happened when i upgraded the ROM from WM 6.1 to 6.5
Kindly help me how to restore my phone
same here
same happened to my Gene. I tried upgrading ROM to 6.5. after restart, it get struck on bootloader screen. it is not even detected by activsync
I upgrade my rom and now he stucks on de first screen when windows mobile show i do everything i can and i don no what do more
The multi port program give-me this error
Cmd>ls boo.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Is everything i can do to my gene come back to life???????
Please Help me
Do you already do a SPL unlock?
If yes, just flash with another ROM.
Go to bootloader by press and hold camera then reset, release reset but still hold camera untill tri color appear, connect usb cable to pc then flash again with another ROM.
How thing i have all ready done that?but show-me how i do to see if i done well
When im restarting the pda the information tha show is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
After that screen goes to windows mobile screen and stuck
But is i do the combinations of the power button and camera i go to the 3 colors screen but when i do a update the program go to 2 % and reset
Please help-me
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
@tonysucre do HSPL
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
tonysucre said:
I think i all ready done that. But show-me how i do?
When i start the pda when arrive to the screen with the windows mobile picture stuck in there.
The information that i have in the begining is
onbl 1.07.0000
spl 1.07.0000
gsm 02.71.90
os 1.17.0.0
When i startup the device i can go to the 3 colors screen but when i tried to
upgrade the rom t when arrive at 2 % the device reset and give-me a error
i don now what i do more please help-me
Click to expand...
Click to collapse
haree said:
hi
as per the nos u have posted u have not done HSPL
ur spl should end with .olip or .oref at the end instead of .0000
go to the tut given by Krazy and read many times use the tools and do the needful given in the same section viabhav has also given a tool
chek on both good luck
Click to expand...
Click to collapse
Can you give-me the link of the tutorial?
Tks
@haree
buddy you are wasting your time .
There is a thread named upgrading ... by krazy as well as a thread by vaibhav named automatic SPL Updater. Just search a bit, son.
or may be you can take the cell to haree who will patch it for you
I Have already tried that but the thing but i cant put thing in the memory phone only in the sd card
Help please
after upgrade to 6.5 screen showing windows mobile 6.5 onyl
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
recharge the battery for mare than 1 hour and try again
After 6 hours of trying to change spl to flash the rom i haven´t manage to do anything more ist´s exactaly the same that i have all ready i have download a lot´s o rom´s and nothing i have tried the to do updating the spl by the sd card and nothing happen because i can´t put anything in the memory of the phone i only can put thing in the card from my computers card reader to trying to change the spl to 1.10-Olipro to flash the rom but i can´t
I don´t no what i have do more?
please anyone with the same problem can help-me
Tks
what error are u getting while upgrading?
vaibhav_batra_the_techguy said:
what error are u getting while upgrading?
Click to expand...
Click to collapse
error 270
is the same that a told is star to upgrading and in the 2 % the phone restarts and give-me that error i thing is because spl is 1.7.0000 or not?
I just see i hav cid lock and and dont now i unlock ?any help
@tonysucre
see
below link as i had told u before u have not done HSPL
u go to the below links and save them on ur comp and Read no one is going to hand hold u and u dont need it with such nice tutes given pls not im a guy with Zero tech skills and i did it so u can as my boss would say its not rocket science
& i dont have any gene tools with me as i have upgraded to another phone (see my sign)
good luck
http://forum.xda-developers.com/showthread.php?t=513329
http://forum.xda-developers.com/showthread.php?t=472169
tonysucre said:
Help please
Click to expand...
Click to collapse