Hey Ladies and Gents, I've got a bit of an issue here.
I've got my faithful Niki100, which was purchased in Australia, completely unlocked (spl 1.22 Hard, completely CID unlocked as per the stickied threads), but it won't read the new KTF sim I have here in Korea. It detects what the number attached to the SIM is, but won't read anything else on it.
The sim does appear slightly different (see attached photo).
The Australian sim would be a GSM/WCMDA USIM, the Korean sim is (probably) a CDMA2000/WCDMA USIM.
Regardless though, I *expected* the phone to pick it up and read the WCDMA (UMTS) part of the sim and connect - It's quite happy using the Australian sim and roaming on the 2100mhz network here, I was expecting it to do the same with the Korean SIM.
Any ideas?
I'm using a custom cooked 6.1 rom I made with the old Nike Kitchen about 8 months ago, and the 1.65.22.29 radio.
Cheers
EDIT:
Solved: It was a combination of needing new Sim Manager version, and the retarded IMEI lock South Korea puts on all foreign phones.
I'm surprised that it roamed on the 2100 Mhz network, I thought it didn't support that, the only option I can think about is try to flash a wm 6.5 rom.
I hope this solve your issue but unfortenally I'm not an expert in these things.
Goodluck
Related
I've tried to get my beloved Wallaby working now on two USA networks, T-Mobile and Cingular to no avail. I bought this new as an O2 XDA 1 in England while I was living there and miss using it so bad.
I've installed the full xda developers kit. It looks good and very functional, but I've never been able to get the phone to turn on with my new SIM from Cingular or my old one from T-Mobile.
I've tried the bandwith switcher and no dice, not on any of the frequencies. I have the model number 10A1 which is listed at only 900/1800 but Cingular runs on 900/1900 I've been told. Wouldn't it just use 900?
I'm so lost and confused. A little help anyone?
Thanks
freud
According to a friend of mine who inserted Cingular SIM to his unlocked T-mobile pocket pc phone and it worked fine.
IT works...but could use some help.
I can confirm:
Yes, Unlocked Wallaby + Cingular SIM card = GSM and GPRS connectivity. Works fine, except recpetion is retivively crap in my area (compared to Motorola RAZR, the Wallaby frankly sucks for reception.
Any thought about a RSU upgrade that might help? Phone states it is on 6.18.00
You need the 10B1 board for the USA since 1900 is used in the US
You need the 10B1 board for the USA since 1900 is used in the US
Hi, I have a Wallaby which was originally from the United States. I live in England however. I downloaded the XDA Developers Rom and installed it which unlocked my device with no problems. However, the only network I seem able to use is O2 (I tried a friends chip) but I want to use my T-Mobile UK chip. I tried the function included in the rom which allows you to switch bands but I still cant get it to recognise T-Mobile, I don't know if it is anything to do with the radio stack, I don't think it is but I could be wrong? Anyway, can any of you offer anyt advice or have you maybe had the same or a similar problem? If so I would really appreciate any imput you might have. Many thanks.
xda1 is only dualband and us xda1's only support 900/1900 not 900/1800 like eu use no way of getting around that really
hi
my previous wallaby was phone edition DT Com from the states, friend of mine which bought it there for me unlocked it and I used it normally in Bosnia, also he had one US wallaby marked as siemens sx56 also unlocked and used here too. As far as I can remember he also bought one more for his cousin here too... Now you know where all those old wallabys are - here !
Dont want to argue is it possible or not just want to inform you, maybe those wallabys was some special kind, dont know.
GL
900Mhz is used by both us and eu so operators who use that band are supported but there is no way to make a dual band a tri band or any way to change a eu dualband to a us dualband that i know of
My Qtek 1020, incidentally bought in the UK, also suffers from this 'feature' and as a result only works on O2 and Vodafone (maybe others but those for sure), but definitely not on T-Mobile and Orange.
Regards,
Neil.
I bought a new att 8525 about a month ago it came with an ATT 3G sim card
I have a Thailand phone and SIM card(the network is AIS)with international roaming. Before I bought the 8525 when i would be in the U.S., I would just use my thai cellphone, an old tri- band nokia and when in the states It would automatically conect to Tmobiles' gsm network(1900 frequency I think)
On the 8525, The phone was locked of course so that the thai sim would not work. I ran Pof's program Auto unlock v3a. I put the AIS sim back in the phone and it worked and automatically conected on Tmobile's gsm network . I was exstatic!!!
Then... I caught a plane back to thailand. While between planes in Taipei I turned on my phone with the Thai sim and it connected !!! I was still exstatic!!!
THEN...I landed in Bangkok thailand. Turned my phone on and it will not recognize any netwoks other than some weird 1900 gsm network that I have never heard of. It does not recognize either AIS or DTAC or Orange which are the big three in Thailand.
I took my Thai sim out of the 8525 and put it back in my old nokia phone and it immediately conected to the AIS gsm network.
So it appears my new 8525 phone is not recognizing 900 and 1800 gsm networks. Pof's program definately ulocked the sim because it doesnt ask for an unlock code. I read the NO gsm issue but I am not sure that is this issue because the phone does appear to recognize 1900 gsm both here and remember it did conect to Tmobile 's 1900 gsm network in the states.
So the issue is recognition of 900 and 1800 gsm.
What can I do? Can someone please help?
Thank you in advance
Here are my device info after runing pof program, I am not sure what the info was before I ran the program:
ROM version: 2.15.502.3
ROM date: 04/09/07
Radio version: 1.16.00.00
Protocol version: 32.53.7018.01H
Kent
Have you checked to see what is enabled under the bands tab in the Settings > Phone panel?
Possibly, something is disabled there. It is possible that you have a resricted setting. If you do not have the "Band" tab visible, the registry hack is in the wiki or certainly somewhere. Try the google search link in my signature.
registry tweaked to add band tab but still havea problem
Thanks for the advice.Sure enough the band tab was not visible so I tweaked the registry to ad the band tab.
However when I try to change the gsm band from"auto" to 900/1800 I get a messsage that says :
"Warning unable to change gsm/umts band, please try again later."
regardless ofhow band setting are changed, auto./gsm, my phone still only detects the 1900 gsm band. arrrgh!
I have since my last post also updated my radio to 1.50,still nothing.
any elpis gretaly appreciated.
Kent
"Warning unable to change gsm/umts band, please try again later."
This ussually means there's a live connection somewhere. Make sure your disconnected from gprs, internet, etc., then your manual band changes will take.
thank to everyone that makes this forum possible
Problem solved after i shut down the phone, inserted my att sim, then phone all of a sudden starting recognizing all the 900/1800 networks here(asia/thailand). I then shut off the phone, inserted my thai ais sim and it also started picking up the networks. Not sure why I was geting the warning message .If it is due to having a live conection somewhere, my gprs was not configured on the new phone yet for thai/ais simand would not connect.
Anyway thanks you all for this forum.Now I will read , read read some more on the best 6.0 ROM for my phone.
Kent
Hi folks!
I have a big problem, I bought 2 weeks ago HTC Touch Pro Sprint from USA. I got it today, and now I see, that it hasn't a SIM slot.
Is it any possibilyti to use it in Hungary with a Sim card? Or is the only way to sell it in the USA? It is new, no used, with all kabels and equipment.
Please, help! Many thanks in advance.
Sorry for my poor english, a speek off course hungarian and german.
the sprint touch pro you purchased is CDMA, if your cellular provider uses SIM cards then u most likely need a GSM phone (at&t fuze).
who is the cell provider in hungary?
if you cell your phone then u can also sell it to verizon customers as they use CDMA band too and the sprint touch pro is far superior than the verizon touch pro
Yes, we have GSM here in Hungary, with 3 providers, t.e. Vodafone, and T-mobile. There is no way to flush or hack it to a GSM phone?
Sorry mate, you have to get a different mobile. CDMA & GSM phones are made of different hardware.
Yes, I know. My only hope was, maybe it is possible to change the CDMA module against a GSM module in the phone.
nope, there is no way to flash a cdma to gsm unless you want a $500 brick.
it would be like trying to flash a Panasonic Home Cordless phone into a Cellular phone, impossible
I just purchased an AT&T branded Titan for use on T Mobile here in the USA. I didn't do my research properly and I just assumed I would get at least 3G. It seems not. However all is not lost if I can just unlock it and use it on my trips back to Scotland.
If I unlock the AT&T Titan will I have any issues just popping a UK SIM in there? Does it run better on some providers?
Thanks
edderspcs said:
I just purchased an AT&T branded Titan for use on T Mobile here in the USA. I didn't do my research properly and I just assumed I would get at least 3G. It seems not. However all is not lost if I can just unlock it and use it on my trips back to Scotland.
If I unlock the AT&T Titan will I have any issues just popping a UK SIM in there? Does it run better on some providers?
Thanks
Click to expand...
Click to collapse
You will need to check with the Carrier that you are going to use the Titan over there... and see which bands of HSDPA that they support. The UK Version of Titan seem to be supported 850/900/1900/2100 , but i don't think the AT&T version support 900 band tho. You will have to recheck.
Good Luck.
And yes, you need to get the SIM-Unlock code based on the IMEI of the phone and then you can insert any sim in and the phone will use it just fine as long as the carrier able to provide network for it.
Looks like you will only be able to use it on GPRS
UMTS/HSPA/HSPA+ tri-band (2100/1900/850 MHz) and quad band GSM/GPRS/EDGE (850/900/1800/1900 MHz) and LTE BC4/BC17
Thanks for the replies. It makes no difference to me what network I use .
I'm having a hard time understanding the differences.
If I look at this page it lists what my phone supports..
http://www.gsmarena.com/htc_titan-4027.php
Looking at this it seems my specs match up with most major UK providers
http://en.wikipedia.org/wiki/List_of_mobile_network_operators_of_Europe#United_Kingdom
Therefore shouldn't it work?
If it is limited to GPRS what are the limitations?
Thanks
Yep in theory it should, Just double checked and I posted specs for Titan2 oops
At&t Titan ie: Frequencies HSPA+/WCDMA 850/1900/2100 MHz and Quad-band GSM/GPRS/Edge 850/900/1900 MHz, Its missing 1800mhz for UK which basically means you cannot use T-mobile or Orange, But Vodafone or O2 or anything running 900mhz should be fine.
The 2G band list says "quad-band" but then only lists 3 bands. I'll bet that's a typo and that all 4 bands are supported.
I've used my unlocked AT&T Titan with local SIMs in numerous countries on 2100MHz 3G... works great.
I have at&t Titan from US in London with O2. Sometimes it woks fine on 3G sometimes doesn't work at all. I forced it to use only 2G and then it works fine.To force the phone Enter code ##3282# Then go to the Three blue dots on the right corner go to settings and in network type choose 2G or 3G depending on what you want.
Received my Titan 2 today from Across the pond, It's at&t branded but unlocked, It is working fine and shows 4G lol, I know it is just a 3G connection but no problems using it on O2, Had to manually input APN settings in cellular and that was it
Well that smile didn't last long, Can't send pic messages, Any ideas?
Hi AndyFZ1S have you tried the connection setup application from htc? Thats what i usedwhen i moved here and it worked fine. Still my 3g connection is poor or inexistant is most areas, i believe at&t phones are missing one band.
Sent from my Titan using XDA Windows Phone 7 App
^@andres22, Thanks & yes have tried connection set-up but it says the carrier is not in the database etc, 3G works fine I just cannot send or receive picture messages, There is no option to manually put in the settings either so am kind of stuck really,
Uhmmm funny that my setup apolication has O2 settings and yours not. Sorry man. I cant think of anything else.
Sent from my Titan using XDA Windows Phone 7 App
No problem, It may well be you have a different database on your at&t Titan compared to the at&t Titan2, Never mind, Hopefully there will be a way to sort it.
I'm having similar issue with Titan 2 using on T-Mobile US. MMS is the only issue. T-Mobile does carry Nokia 710 and HTC Radar. I wonder if there is a way to get settings from those phones.
Sent from my HP Touchpad using xda premium
The only way I can think of doing it is by flashing either a Stock Titan2 ROM (if it exists) or a custom one, That way Connection set-up would have most of the carriers in its database and not just at&t, But that won't be possible without HSPL or any ROMs, Maybe HTC could do something their end to update connection set-up etc?