please can someone HELP me by sending me the instructions how to restore dead bootloader on my O2 atom life after a failed WM6.5 upgrade.
the device is not switching on, not entering bootloader screen.
when the battery is inserted and charger connected, orange led light is lit
PLEASE HELP, i love my atom life
pblair said:
please can someone HELP me by sending me the instructions how to restore dead bootloader on my O2 atom life after a failed WM6.5 upgrade.
the device is not switching on, not entering bootloader screen.
when the battery is inserted and charger connected, orange led light is lit
PLEASE HELP, i love my atom life
Click to expand...
Click to collapse
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
check the site's wiki
there should be something about this.
additionally, have you tried the mini sd card flashing method (you can enter it's bootloader by holding the camera button - if thats the bootloader you're not talking about)
help me to revive my dead o2 atom life
my o2 atom life is not going in bootloader mode after mismatch rom upgrade(it has complete black sceen, i tried all buttons and battery remove and reinsert). please help me
you bricked your device .... try to open the device and remove this "cmos" battery
TRY THIS
manmohan0339 said:
my o2 atom life is not going in bootloader mode after mismatch rom upgrade(it has complete black sceen, i tried all buttons and battery remove and reinsert). please help me
Click to expand...
Click to collapse
hi manmohan
First thing Dont Panic. There could be several things which might be responsible together making things difficult and confused.
1) Battery have not enough power.
2) Rom installation failed in the middle due to ROM file corruption.
Possible solution (Worth trying out)
----------------------------------
1) For first thing to confirm. Keep battery on charge for 1 hour though nothing is on screen. This will charge no only the main battery but also the internal CMOS battery, which is important. The redlight of charging will show that phone hardware is charging your battery. You are done with BATTERY.
2) Download fresh copy of any compatible rom on your pc. Connect any USB CARD-READER to your PC. Format SD Memory Card in FAT format (also known as FAT16) on your pc. Be sure the card is less than 2GB. If its 1 GB it is better. Copy the AL1.DIO file on SDCARD. You are done with SDCARD.
3) Try installing ROM exactly as mentioned in this THREAD
4) If still this fails, that means your battery is not yet fully charged or not working properly. Go to any mobile shop and ask them to charge the battery to full with thier charging unit and again start from step 1. Also ask the mobile technician if your battery is fine or not.
If battery is above 70% and card is FAT and ROM file is not corrupted, the installation again will go fine and you will be with your mobile again.
THIS MAY HELP, I M NOT SURE, BUT WORTH TRYING OUT THESE BASIC STEPS. HOPE THIS HELPS.
BEST OF LUCK...
Mahendra C
Mumbai, India
can you tell me the steps you took to cure your atom life.....thanks for your help
aa125690 said:
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
Click to expand...
Click to collapse
i am not getting to the boot loader screen at all. when i press the power button, it phone doesnt power up.
when i connect charge...the amber light blinks and when remove charger its the same until battery runs out.
greatly appreciate your help
pblair said:
i am not getting to the boot loader screen at all. when i press the power button, it phone doesnt power up.
when i connect charge...the amber light blinks and when remove charger its the same until battery runs out.
greatly appreciate your help
Click to expand...
Click to collapse
Try charging your battery until the amber light turns green (it means it is fully charged).Then try to do a hard reset (pressing the power and reset button simultaneously). It will bring your phone to the last ROM that was installed.
Dear ManMohan
No need to send private emails. May be you are assuming most of us as mobile hardware experts but trust me many of us are not. I am just trying to help.
I am sure, you are very near to solution which you can do on your own. And yes, discussing all this in forum, will help many other people too now and in future, than in private emails.
--------------------------------------------
Try to find Original ROM from O2 website here http://www.myxda.com/romupgrade.aspx Select Atom Life and download Rom Installer for XP version and VISTA version both. Write them on blank CD for future reference, just in case you may need in future. DOWNLOAD THEM AS SOON AS POSSIBLE BEFORE THEY CLOSE THE SITE AS O2 IS ALREADY TAKEN OVER BY MWG (www.mwg.com)
Try installing this official ROM from your PC with this installer, while your O2 Atom life connected to PC with USB Cable. Even this method also restores many phones from boot error.
Hope this helps. Best of luck.
Mahendra
same problem
I have the same problem. what happens is that i include eboot.nbo in the mini sd. when flashing is done, i have a dead set.
searching for jtag what I found is that the software out there that is compatible for exec and flame. when used with life will result with errors.
also trying some key combinations but never come up with flashing/boot screen.
same problem
asunta said:
I have the same problem. what happens is that i include eboot.nbo in the mini sd. when flashing is done, i have a dead set.
searching for jtag what I found is that the software out there that is compatible for exec and flame. when used with life will result with errors.
also trying some key combinations but never come up with flashing/boot screen.
Click to expand...
Click to collapse
hi,
can you give photo showing jtag poins for atom life and how to prepare its cable, i want to try for my dead atom life.
juliuscezar said:
Try charging your battery until the amber light turns green (it means it is fully charged).Then try to do a hard reset (pressing the power and reset button simultaneously). It will bring your phone to the last ROM that was installed.
Click to expand...
Click to collapse
i charged for 3 days and the orange light just keeps blinking...do you have any more ideas i could try
aa125690 said:
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
Click to expand...
Click to collapse
after charging phone....i remove the battery and replace and when i press record+camera buttons + power and reset the orange lights comes....does this info help in you helping me
Yap Atom Dead bootloader is very annoying
Almost 1 year my Atom life dead or brick.I already Searched even to Service Center in our country and Atom central service in Singapure and china but none of them can fixed this this problem. They Said : "The Only way for fixing this brick atom life just Replace mother board".The Atom which has dead bootloader can not fix with Just press whatever button in your atom or even install New ROM.Cause the one of term for installing the new rom to The ATOM life is port must be detected by USB Computer port.But in this condition your atom life nothing detected by USB Port computer.Reasonly you can not nothing to do.But FYI if you have contact person in China precisely in Quanta Computer Manufacturer especially in Maintenance or engineering, I think there's only hope.But In the world there's nothing imposible to do.Until now I am still keeping my brick atom dead life, waiting someone can solve this problem. many thx.
jtag
blankavail2009 said:
Almost 1 year my Atom life dead or brick.I already Searched even to Service Center in our country and Atom central service in Singapure and china but none of them can fixed this this problem. They Said : "The Only way for fixing this brick atom life just Replace mother board".The Atom which has dead bootloader can not fix with Just press whatever button in your atom or even install New ROM.Cause the one of term for installing the new rom to The ATOM life is port must be detected by USB Computer port.But in this condition your atom life nothing detected by USB Port computer.Reasonly you can not nothing to do.But FYI if you have contact person in China precisely in Quanta Computer Manufacturer especially in Maintenance or engineering, I think there's only hope.But In the world there's nothing imposible to do.Until now I am still keeping my brick atom dead life, waiting someone can solve this problem. many thx.
Click to expand...
Click to collapse
I am building jtag hardware. I will try to flash boot loader using linux taken from this site.
HTML:
http://www.nrs.pt/pub/projects/acuv2/doc/mel-colibri/html-chunk/mel.bininstall.html
It is also possible to use windows, but some parts of the program is missing. Still, I am having a hard time to build the jtag hardware, taken some parts from nokia dct3 flasher.
Had the same problem and after about 15 days of its brick status I took it out and charged and after 100 % charged installed the official "Xda_Atom_Life_WM6_WWE_RC2140907B2" and then subsequently the PDAVIET ROM 6.1 with AL1.DIO.
can you explain the procedure in detail.?
Carbideman said:
Had the same problem and after about 15 days of its brick status I took it out and charged and after 100 % charged installed the official "Xda_Atom_Life_WM6_WWE_RC2140907B2" and then subsequently the PDAVIET ROM 6.1 with AL1.DIO.
Click to expand...
Click to collapse
please explain in detail, how did you repiar it ? where you able to go in bootloader mode?
JTAG
asunta said:
I am building jtag hardware. I will try to flash boot loader using linux taken from this site.
HTML:
http://www.nrs.pt/pub/projects/acuv2/doc/mel-colibri/html-chunk/mel.bininstall.html
It is also possible to use windows, but some parts of the program is missing. Still, I am having a hard time to build the jtag hardware, taken some parts from nokia dct3 flasher.
Click to expand...
Click to collapse
I think the problem not from the JTAG Software.Officially Intel PXA 270 can be flashed by reguler flasher software with jflashm or even HJTAG and I already read detailly in the intel section site,but we can not find the right position so we can not flush directly eboot this processor.Now I am unfolding this atom for searching The right JTAG Position.But I don't know how identify this jtag point.In this side board there are many point, I think I must try one by one, do u have any idea?
help
i also have same problem... my atom life brick...i cannot power on at all.. nothing appear on the screen... i have done the charging tricks.. please help me
Related
Hi
I downloaded ROM from www.seeo2.com to upgrade my atome life, while upgrading there is nothing progress in update progress bar nearly 1 hour, and there is nothing ..., I disconntect usb cable then my atom life not boot any more, can anyone help?
and how to login to boot loarder?
Thanks
socheat said:
Hi
I downloaded ROM from www.seeo2.com to upgrade my atome life, while upgrading there is nothing progress in update progress bar nearly 1 hour, and there is nothing ..., I disconntect usb cable then my atom life not boot any more, can anyone help?
and how to login to boot loarder?
Thanks
Click to expand...
Click to collapse
remove Mini-SD connect USB press buttons "restart+record+volume" hold volume+record for a while... know u,l enter boot loader mode start upgrading
I try to do that but still blank screen, nothing appear
Help please..
If bootloader dead, how to reflash boot loader?
Thanks
remove your batteries. wait for a minute. then reinsert your batteries and DO as instructed by Alipi. You must have a charged battery; otherwise, you will still get a blank screen.
If your batteries are discharge, charge first with wall charger...
jiggs said:
remove your batteries. wait for a minute. then reinsert your batteries and DO as instructed by Alipi. You must have a charged battery; otherwise, you will still get a blank screen.
If your batteries are discharge, charge first with wall charger...
Click to expand...
Click to collapse
you must replace a flash rom or rewrite the flash rom bootloader program,otherwise,it will be a brick!
afeng11 said:
you must replace a flash rom or rewrite the flash rom bootloader program,otherwise,it will be a brick!
Click to expand...
Click to collapse
Thanks, but how to reflash rom bootloader program?
socheat said:
Thanks, but how to reflash rom bootloader program?
Click to expand...
Click to collapse
It's so hard for individual to reflash the bootloader,cos you had no tools that called JTAG interface,the JTAG interface inlucde a parallel port cable and corresponding software,and you had to know the JTAG interface in you ppc's motherboard!so hard of all to you and me!
So there is only way JTAG? is there other way to reflash bootloader?
Thanks
Err... to save you such problem... it would be wise just to bring the device to the O2 Service Centre and ask them to do it for you. They normally just replace the board (quicker) and flash your board later to be fixed into someone else's device who have the same problem as you.
The great thing about this solution is, IT'S FREE and your warranty is INTACT.
Sure
My atom life still under warrenty.
Thankss
HELP!! Flashing ROM (Winodows Mobile 6.5) Stock on 100%
hi guys... im using an Atom Life Limited Red... Im trying to flash it with this ROM:Atom Life WM6.5 build 23001.. Did all the things necessary like copy the rom file AL1.DIO into my 2gb memory card thats been formated to Fat16 and without any files in it..
Now after Holding the rec button and pressing the reset button, it start to detect my memory card, then updating its image from 0-100%. But after 100% and its now saying
**Mini-SD Update Image OK**%) its been taking a while to reboot it up.. i mean awhile like an 30mins to 1hr..
I really don;t know whats wrong.. tried downloading the ROM 3x already.. and its still the same... stock on 100% OK!..
Hope someone here can help and lend me a hand plsss...
thank you guys and more power..
Sarah_Shine said:
hi guys... im using an Atom Life Limited Red... Im trying to flash it with this ROM:Atom Life WM6.5 build 23001.. Did all the things necessary like copy the rom file AL1.DIO into my 2gb memory card thats been formated to Fat16 and without any files in it..
Now after Holding the rec button and pressing the reset button, it start to detect my memory card, then updating its image from 0-100%. But after 100% and its now saying
**Mini-SD Update Image OK**%) its been taking a while to reboot it up.. i mean awhile like an 30mins to 1hr..
I really don;t know whats wrong.. tried downloading the ROM 3x already.. and its still the same... stock on 100% OK!..
Hope someone here can help and lend me a hand plsss...
thank you guys and more power..
Click to expand...
Click to collapse
I'm having the same.... Did you find a solution?!
My AtomLife totally dead now, nothing happened when trying to turn on...
yesterday I tried to update the ROM to a new one - WM6 .
I copy into my mini SD the file diskimage_ver.nb0 and I renamed it into diskimg.nb0, after the update my device turned off and I couldn't turn it on.
I pressed the camera button and soft reset so that the bootloader will boot and the PDA turned on! and bootloader appear - but I forgot to copy into the sd card the original ROM so I restart again and I copy to the mini sd card the original ROM files and I pressed the camera button and soft reset to get the bootloader again but the PDA not responding...
(When I connect the PDA to electricity the red light works and when I remove the battery and insert it again the call button and hang up buttons work (green and red light) for 1 second).
Please help me I dont know what to do
Take a look at: http://forum.xda-developers.com/showthread.php?t=314613
Thanks mightyox I did what jiggs wrote but it's not working
Be paient:
1) take out battery & SIM for a while...5 min is enough.
2) remove SD card( a must )
3) put battery back
4) press the camera button with the "POWER" button.
5) check if boot loader boots.
6) if yes, re-flash your phone with running the update Flash program in Windows environment connected with a USB cable.
Thanks dcoloane but it's not working
submission384 said:
Thanks dcoloane but it's not working
Click to expand...
Click to collapse
I had the same problem yesterday and fixed it.
To get back to the bootloader, do this exactly in chronological order:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button (without the battery attached)
4. replace battery back while still holding the buttons
This will bring you back to bootloader mode.
When you get into the bootloader,
1. Plug the device to your desktop via usb.
2. Make sure that the Notification area in your desktop at least detects a device. if not, try and try until it does.
3. Download Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe (ancient basic rom for my exec) but in your case, because you have an Atom only, get the one for Atom(not exec) i think this is it http://rapidshare.com/files/40346284/Xda-Atom-ENG-20060426-MOT0822.exe .
4. flash it the usual way.
5. Usualy gets stuck at 6% at the extended ROM upgrade, dont mind it, hard reset it,
6. Enter the bootloader again.
7. Flash your original ROM.
dzaprojects said:
I had the same problem yesterday and fixed it.
To get back to the bootloader, do this exactly in chronological order:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button (without the battery attached)
4. replace battery back while still holding the buttons
This will bring you back to bootloader mode.
When you get into the bootloader,
1. Plug the device to your desktop via usb.
2. Make sure that the Notification area in your desktop at least detects a device. if not, try and try until it does.
3. Download Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe (ancient basic rom for my exec) but in your case, because you have an Atom only, get the one for Atom(not exec) i think this is it http://rapidshare.com/files/40346284/Xda-Atom-ENG-20060426-MOT0822.exe .
4. flash it the usual way.
5. Usualy gets stuck at 6% at the extended ROM upgrade, dont mind it, hard reset it,
6. Enter the bootloader again.
7. Flash your original ROM.
Click to expand...
Click to collapse
Good experience....hehehe...
not working
at the repair center they told me to remove the backup battery on the board (if it has one) and put it back... or just to give them with a nice price of 150$they repair it...
submission384 said:
not working
at the repair center they told me to remove the backup battery on the board (if it has one) and put it back... or just to give them with a nice price of 150$they repair it...
Click to expand...
Click to collapse
Hehehe. It's time to buy an iPhone or Atom Life. hehehe. keep on searching the forum. i'm 99% sure that you'll figure it out somehow. That's how TofClock did it so well. Just search the entire forum.
I'm having the same exact problem. The bootloader is just not coming back up after the camera and reset [it did before but I was trying to downgrade the hack atom exec on my atom pure so the wm6 install utility would work]. I figure I would let my atom sit without the battery for a while with battery out to see if I can get the backup battery to drain down before I try it again. Anyone else have this problem that has a solution??
submission384 said:
yesterday I tried to update the ROM to a new one - WM6 .
I copy into my mini SD the file diskimage_ver.nb0 and I renamed it into diskimg.nb0, after the update my device turned off and I couldn't turn it on.
I pressed the camera button and soft reset so that the bootloader will boot and the PDA turned on! and bootloader appear - but I forgot to copy into the sd card the original ROM so I restart again and I copy to the mini sd card the original ROM files and I pressed the camera button and soft reset to get the bootloader again but the PDA not responding...
(When I connect the PDA to electricity the red light works and when I remove the battery and insert it again the call button and hang up buttons work (green and red light) for 1 second).
Please help me I dont know what to do
Click to expand...
Click to collapse
You are not suppose to rename diskimage_ver.nb0 into diskimg.nb0 without altering the file. That's why they have different names to start with.
The files that came with normal DSUU OS mode flashing have header identifier while the files for SD Card flash do not. It is assumed that you know what you are doing during SD Card flashing, that's why there is no manual or instructions to do it. bootloader mode was meant for device service personnel use only. We use it to hack the ROM.
DO THE FOLLOWING:
1. remove the battery for one minute
2. insert the battery while observing the LED
3. if LED blinks once, your bootloader is okay
4. do as dcoloane says to the detail
IF LED doesn't blink, sorry mate, you toast your device. It's now a paper weight.
Its really strange. When I insert the battery, the orange LED will blink once really quick and charging seems to work also. But when I try to get it into bootloader mode, it just doesnt do anything. This atom pure is my back up phone [have a atom life also] so I guess I will let the battery completely drain out of it before I will try again~_~. As for the renaming, I did the same thing as the atom just couldnt recognize the file and update the rom if you didnt rename it [yeah, yeah.. I"m a noob - the problem isnt upgrading the rom which I have done many time, its the downgrading of the hack atom exec rom on my original atom that screw me up as I couldnt upgrade the wm6 due to the install file wont work as it think its a atom exec instead of the atom pure~_~]
Maybe you have to remove battery for a night to make sure it is dried out.
yeah, just going to wait for my backup battery to run out of juice before I try again. Either that or send it in for the $150 repair~_~.
dwhsieh said:
Its really strange. When I insert the battery, the orange LED will blink once really quick and charging seems to work also. But when I try to get it into bootloader mode, it just doesnt do anything. This atom pure is my back up phone [have a atom life also] so I guess I will let the battery completely drain out of it before I will try again~_~. As for the renaming, I did the same thing as the atom just couldnt recognize the file and update the rom if you didnt rename it [yeah, yeah.. I"m a noob - the problem isnt upgrading the rom which I have done many time, its the downgrading of the hack atom exec rom on my original atom that screw me up as I couldnt upgrade the wm6 due to the install file wont work as it think its a atom exec instead of the atom pure~_~]
Click to expand...
Click to collapse
same thing...
orange LED blinks once really quick and charging seems to work also...
and I let the battery completely drain out (left it about 4 days without battery) and... nothing !!!
I sent my device to repair shop they are trying to repair it... wish me luck
submission384 said:
same thing...
orange LED blinks once really quick and charging seems to work also...
and I let the battery completely drain out (left it about 4 days without battery) and... nothing !!!
I sent my device to repair shop they are trying to repair it... wish me luck
Click to expand...
Click to collapse
have u try this procedure on #1
http://forum.xda-developers.com/showthread.php?t=314613
dwhsieh said:
Its really strange. When I insert the battery, the orange LED will blink once really quick and charging seems to work also. But when I try to get it into bootloader mode, it just doesnt do anything. This atom pure is my back up phone [have a atom life also] so I guess I will let the battery completely drain out of it before I will try again~_~. As for the renaming, I did the same thing as the atom just couldnt recognize the file and update the rom if you didnt rename it [yeah, yeah.. I"m a noob - the problem isnt upgrading the rom which I have done many time, its the downgrading of the hack atom exec rom on my original atom that screw me up as I couldnt upgrade the wm6 due to the install file wont work as it think its a atom exec instead of the atom pure~_~]
Click to expand...
Click to collapse
It's not how long you take out the battery or the amount of battery power. It's how quick you press the bootloader mode buttons after replacing the battery. It has to be immediate; otherwise, it won't work. You also have to hold the button simultaneously for a second.
did that already. It work previously so I know I can get into bootloader. It only stop working after the flashing. Where exactly do you send it in for repair anyway?? Anyone has a tele or address as when I bought it it didnt come with a box or manual.
I found local PDA repair shop...
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dia_dxo and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
..
..
..
Please check you battery..
..
..
..
what do u mean by checking my battery it's fully charged 98%
crazy_luv said:
what do u mean by checking my battery it's fully charged 98%
Click to expand...
Click to collapse
1. How long have you been using your battery?
2. 100% charged is not equal to a healthy battery,
3. normally, the longer year the battery you use, the weaker the battery performs.
4. just .... if you have the other new battery, test the result, or
5. you can also check if the your problem will be the same if AC charger is plugged.
just wanna assist.
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
crazy_luv said:
1. i have been using my battery for 2 years.
2. battery lifetime varies from 1.5-2 days.
i dont have my AC charger close, so do u know another way to check battery health ?
Click to expand...
Click to collapse
1. you may connect the usb power to make a softreset, and to see you problem exists or not,
if no more problem, that means the battary MAY BE not healthy enough to bear the
high(for micro electronics) electric consumtion for prophet rebooting.
Good Luck. Just one of the ways to find your answer logically.
By the way, for monitoring your battery, you may use the battery status.
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
rondol1 said:
I can't help you with the boot issue, but your DTMF problem is already covered in the CE thread. Just open that thread and use "search this thread" from the top-bar using DTMF as keyword. Your answer will be presented within a split second.
SUCCES!
As for your dialog with dioxda2, I think you are talking about totally different things......
Click to expand...
Click to collapse
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
dioxda2 said:
Dear rondol1,
He has 2 problems, I am helping only one of them (not rich enough..... )
and you, you had completed his answers.
Click to expand...
Click to collapse
Together we will manage... But you are talking about battery condition as a solution for his "stuck in bootloader" problem? I am under the impression that you misunderstood his question. But then again, it could also be me who misunderstood!
I think the 'battery' may be something to do with the power provided by the USB port.
Try entering bootloader with the AC supply in.
RE:1. am not able to send DTMF during the phone call
crazy_luv said:
i upgraded my phone succesfully to wm6.1 (prophet shadow clean) i admit i was a hard trip, althought it was interesting.
but after days of usage i found the following,
1. am not able to send DTMF during the phone call
2. am not able to bring my phone back to Boot Screen so i can install another ROM
SPL: 2.G3.4pda
IPL: 2.09
ROM: prophet shadow CE
QTEK S200
so i tried to use the loader, it works fine and when it tries to restart my phone in the boot screen mode the phone just hangs in a black screen, and when i try to do it manually it also hangs up in that black screen.
till i remove the battery and restart the phone, and it loads the ROM very smoothly again,
i tried to hard reset the phone and try again, but i get the responces,
did anyone experienced these problems ?
btw thanks to dioxda2 and claudy fa for such hard work Thank you guys,
Click to expand...
Click to collapse
About this "1. am not able to send DTMF during the phone call "
try to find in registry this key (EnableDTMF) and change it to 0
i know is very strange, but it works...
hi guys! im new in using Smart phones. i got a problem w/ my XDA ATOM, i tried upgrading my rom to WM 6.5 using SD card. but suddenly that ROM is I think 'corrupted'. now, my phone is dead and not functioning.
my only hope is the bootloader.. can someone help me to fix my problem??
thanks in advance!
ayazero5 said:
hi guys! im new in using Smart phones. i got a problem w/ my XDA ATOM, i tried upgrading my rom to WM 6.5 using SD card. but suddenly that ROM is I think 'corrupted'. now, my phone is dead and not functioning.
my only hope is the bootloader.. can someone help me to fix my problem??
thanks in advance!
Click to expand...
Click to collapse
try this :
Brick Test:
1. Make sure your device has ample battery charge. If you're not sure plug
it in with the wall charger for at least 10min
2. Remove your battery for at least 1 minute
3. Replace your battery while observing the LED lights
4. If the LED blinks once upon battery insertion, you might have hope yet
The only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader
screen)
Note: Failure to hold the buttons at the same time during battery insertion will cause it not to work.
good luck
@ knoxbrotherhood
yes, i can access the bootloader.. but i cant find the right ROM for my ATOM.
please go here for more advanced
http://forum.xda-developers.com/group.php?do=discuss&group=&discussionid=306
having a trouble? just post reply
thx man my atom died too
my piece of junk atom died last night aswell i followed your instructions now it installing windows 6.5
Hi guys
I'm new to this stuff, and I've been searching round on the forums for the last half hour but haven't managed to find a clear cut explanation of whether my atom is dead or not..
I just tried to install the Windows Mobile 6.5 ROM (Atom_B1.7z) I think it was the helloworld1 rom? Anyway, I was trying to install the ROM through the DSSU method and it got through to about 6% on the first step then my atom shut off
It won't respond to any button pushes now, however it will still display the charging light. I can't even get into the bootloader to reflash, however, I would have thought that the first step was only to install the OS, so I don't understand how it effects the bootloader? Unless I'm wrong?
Can anyone give me a clear cut idea as to whether my atom is dead or not?
Cheers.
mabix said:
Hi guys
I'm new to this stuff, and I've been searching round on the forums for the last half hour but haven't managed to find a clear cut explanation of whether my atom is dead or not..
I just tried to install the Windows Mobile 6.5 ROM (Atom_B1.7z) I think it was the helloworld1 rom? Anyway, I was trying to install the ROM through the DSSU method and it got through to about 6% on the first step then my atom shut off
It won't respond to any button pushes now, however it will still display the charging light. I can't even get into the bootloader to reflash, however, I would have thought that the first step was only to install the OS, so I don't understand how it effects the bootloader? Unless I'm wrong?
Can anyone give me a clear cut idea as to whether my atom is dead or not?
Cheers.
Click to expand...
Click to collapse
ur device is bricked, if and only if, ur device won't start normally... even if u press soft-reset, hard-reset, or even bootloader mode buttons. Before panicking, do da following:
Brick Test:
1. Make sure ur device has ample battery charge. If u're not sure plug it in with da wall charger for at least 10min
2. Remove ur battery for at least 1 minute
3. Replace ur battery while observing da LED lights
4. If da LED blinks once upon battery insertion, u might have hope yet
Da only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding da buttons
4. Release da buttons at da same time(u should see bootloader screen)
Note: Failure to hold the buttons at da same time during battery insertion will cause it not to work.
GOOD LUCK
Thanks, ma Atom now working ) yeahh