HTC Wifi Router help - Touch Pro CDMA

Is there any way to make the phone charge while the Wifi Router is running?
Is there any way to turn the screen off while the Wifi Router is running?

GatorsUF said:
Is there any way to make the phone charge while the Wifi Router is running?
Click to expand...
Click to collapse
Plug in a charger or USB cord?
I use mine with an USB connection instead of a WiFi connection anyway. I found that radio+WiFi simply eats thru the battery all too quickly.

wifi software
can anyone help me find a wifi-router version? i used to have one but it was a trial version and its already expired...

hassasin88 said:
can anyone help me find a wifi-router version? i used to have one but it was a trial version and its already expired...
Click to expand...
Click to collapse
Pm me and i can send you a working one.....

hassasin88 said:
can anyone help me find a wifi-router version? i used to have one but it was a trial version and its already expired...
Click to expand...
Click to collapse
If you upgrade to any of the 6.5 WinMo cooked ROMs, they have one build into the Comm Manager.
So you don't need to deal with any of the hacked versions. And I find that the WifiRouter your using has lots of problems with ICS. Setup doesnt alwasy go smooth and doesn't alway work properly if it is.
(eg. The NFSFAN ROM, i'm using works has one.)
Go the WinMo 6.5 way, it a lot less hasle.

Related

vzw-mr1& ics not there??

Currently I just flashed to the new mr1 and have gps working well with gc medics files and so forth. I do allot of camping in state parks and always used ics to connect the laptop and phone. I didn't bring the usb cable with me this time.
Since using the new vzw mr1 rom I can't get BT pan or anything wifi to adhoc the connection at all to work. I am suspecting that vz has crippled it but not sure. The laptop will connect to the ppc but it won't go for pan functions.
anyone out there have the cab for ics, if there is one?
Or have a better idea.
I have been trying to use wmwifi but of course it dorks at ics not being there...
Thanks!!!
rangerdave said:
Currently I just flashed to the new mr1 and have gps working well with gc medics files and so forth. I do allot of camping in state parks and always used ics to connect the laptop and phone. I didn't bring the usb cable with me this time.
Since using the new vzw mr1 rom I can't get BT pan or anything wifi to adhoc the connection at all to work. I am suspecting that vz has crippled it but not sure. The laptop will connect to the ppc but it won't go for pan functions.
anyone out there have the cab for ics, if there is one?
Or have a better idea.
I have been trying to use wmwifi but of course it dorks at ics not being there...
Thanks!!!
Click to expand...
Click to collapse
Look here...
http://www.smartphonejunkie.com/showthread.php?t=170032
FYI I searched google and this was the second link that came up.
http://www.google.com/search?hl=en&q=titan+ICS+CAB&aq=f&oq=
here you go

Flyer not picking up hot spot

I have a Droid 1 and it is rooted. When I run Barnacle tether my Flyer does not show that there are any wifi signals in the area. I do not have trouble connecting to my house wifi but I would really like it if I can get my Flyer to tether to my phone.
I know barnacle is working properly because I am using it right now with my netbook.
After doing some more searching it seems like this a problem with all tablets, and the only fix is to root the tablet. So I guess I will be patiently waiting for root.
I can connect to my evo using the wifi tether app. I would suspect that its the barnacle app and not the flyer.
http://code.google.com/p/android-wifi-tether/
I can connect to my Desire Z WiFi hotspot running CM7.
Ad-Hoc
I think Barnacle creates an Ad-Hoc network and that may be why the Flyer doesn't connect. It works fine with my Inspire 4G which doesn't use that method.
ricwhic414 said:
After doing some more searching it seems like this a problem with all tablets, and the only fix is to root the tablet. So I guess I will be patiently waiting for root.
Click to expand...
Click to collapse
I am in the same boat, droid 1 patiently waiting for a way to tether to the htc flyer
I connect my HTC Flyer to my phone with no problem.
Yeah the issue is that the wifi hotspot you created is adhoc. If you use the froyo built-in tethering, that should work.
I think the problem is the Droid 1 and how it creates a hotspot. Because I have used both barnacle and also wifi tether with the same results. My netbook can see it but not my tablet.
I am not sure why this is because I am also running CM7, but I guess it must be the way the Droid 1 is. And until the flyer gets rooted there is nothing I can do about it.
kkinder said:
Yeah the issue is that the wifi hotspot you created is adhoc. If you use the froyo built-in tethering, that should work.
Click to expand...
Click to collapse
As in the one you have to pay for through verizon? I don't like tethering that much. lol. Id rather just wait then.
Cm7 has built in WiFi tethering. You don't need an app to do it. I suggest trying that under the WiFi settings. You don't have to pay for it.
ricwhic414 said:
As in the one you have to pay for through verizon? I don't like tethering that much. lol. Id rather just wait then.
Click to expand...
Click to collapse
I don't know. Tmobile doesn't charge. But I doubt you'd have to pay if it's a third party ROM like cyanogenmod.
kkinder said:
I don't know. Tmobile doesn't charge. But I doubt you'd have to pay if it's a third party ROM like cyanogenmod.
Click to expand...
Click to collapse
O ok I know what you are talking about. I will try that I just need to find a cable.
kkinder said:
Yeah the issue is that the wifi hotspot you created is adhoc. If you use the froyo built-in tethering, that should work.
Click to expand...
Click to collapse
Barnacle won't work with my Droid X but WiFi Tether works great.
It works on my
I have a htc evo with mikfroyo and my hotspot works good with my htc flyer i dont have any problems
I have a rooted d1 running Project Elite 4.2 flawlessly. I can connect anything including an iPod Touch to my droid via Wireless Tether app with the exception of my Flyer tab.
Why is the tablet different then everything else? It does not even see the d1.
Any suggestions other than changing ROMS? PE 4.2 has been the best on my phone.
TemplesOfSyrinx said:
I have a rooted d1 running Project Elite 4.2 flawlessly. I can connect anything including an iPod Touch to my droid via Wireless Tether app with the exception of my Flyer tab.
Why is the tablet different then everything else? It does not even see the d1.
Any suggestions other than changing ROMS? PE 4.2 has been the best on my phone.
Click to expand...
Click to collapse
Thats exactly why I started this thread. I agree PE 4.2 is amazing you should try some of the new GB roms they have really come a long way.
If we get the flyer rooted there are some apps and some .zip files out there that can fix this for us. We just need root access.
As someone already suggested, it sounds like the Flyer's wireless client doesn't recognize ad-hoc networking. Only infrastructure networking like hotspots, office and home WiFi.
Maybe there's and apps with better control of the wireless stack.
ricwhic414 said:
Thats exactly why I started this thread. I agree PE 4.2 is amazing you should try some of the new GB roms they have really come a long way.
If we get the flyer rooted there are some apps and some .zip files out there that can fix this for us. We just need root access.
Click to expand...
Click to collapse
I have tried several of the gingerbread Roms with poor results. PE, liquid and cm7 all run great at first but become very buggy after a day or so. My d1 likes PE 4.2 the best.
Are there other tether apps that don't use ad-hoc?

why my amaze can't see my wifi???

my amaze takes about 4-5minutes to find and connect my wifi i've tried about 5or 6 roms and every one of them happens the same thing.....
but recently i've tried the fastamaze and the nightmare one and my wifi is detected within 0.5 seconds and i can connect to it....if someone has any ideas on why this happens please tell me!
slaude said:
my amaze takes about 4-5minutes to find and connect my wifi i've tried about 5or 6 roms and every one of them happens the same thing.....
but recently i've tried the fastamaze and the nightmare one and my wifi is detected within 0.5 seconds and i can connect to it....if someone has any ideas on why this happens please tell me!
Click to expand...
Click to collapse
It's a stock bug, once the devs get a good foothold in the ICS foundation, it's gonna be fixed, just a little patience for now, k?
yeah ok but why the nightmare rom and the fastamaze rom work flawlessly , the wifi that is... they're on ics too.?
slaude said:
yeah ok but why the nightmare rom and the fastamaze rom work flawlessly , the wifi that is... they're on ics too.?
Click to expand...
Click to collapse
Yeah but you see the difference is, most of the roms are stock based, therefore the bug is still there, nightmare and fastamaze on the other hand had to be built from the ground up when it came to hardware things like wifi, so until the guys have some source to work with or have the time to make their fixes from those roms workable on stock, it's gonna be a little glitchy.
i wonder why the phone can see all my neighbors wifi except mine it takes like 5minutes!?
slaude said:
i wonder why the phone can see all my neighbors wifi except mine it takes like 5minutes!?
Click to expand...
Click to collapse
Everybody has this issue, been puzzling for a while now, the home router is always the only one to he harder to be detected, gonna play with my moms phone later and check it out.
Sent from a Galaxy Nexus?
try changing your wireless security type on your router. WPA personal AES works well for me.
I mistakenly deleted my nandroid of my original stock shipped ics rom. When i try to go back to stock with one of the stock roms listed, any wifi is detected but will not connect. Goes through the authenticating and obtaining ip address and juststrats over. I can use energy rom and no problem.
mike102871 said:
I mistakenly deleted my nandroid of my original stock shipped ics rom. When i try to go back to stock with one of the stock roms listed, any wifi is detected but will not connect. Goes through the authenticating and obtaining ip address and juststrats over. I can use energy rom and no problem.
Click to expand...
Click to collapse
Reflash the kernel manually.
Sent from a Galaxy Nexus?
Dark Nightmare said:
Reflash the kernel manually.
Sent from a Galaxy Nexus?
Click to expand...
Click to collapse
I have tried this many times. WIFI just will not connect on any of the stock roms. Im on energy and its fine.
mike102871 said:
I have tried this many times. WIFI just will not connect on any of the stock roms. Im on energy and its fine.
Click to expand...
Click to collapse
I guess the glitch seems to be worse for you than normal, not much I can say unless someone pulls the files from energy and make a flashable for your phone.
slaude said:
my amaze takes about 4-5minutes to find and connect my wifi i've tried about 5or 6 roms and every one of them happens the same thing.....
but recently i've tried the fastamaze and the nightmare one and my wifi is detected within 0.5 seconds and i can connect to it....if someone has any ideas on why this happens please tell me!
Click to expand...
Click to collapse
I'm using NRG and the stock ICS radio, and my WiFi connects within a few seconds. Connects instantly, but takes a few seconds to acquire IP addresses & etc.
I think I have the same issue...
I just flashed CM10 onto my Transformer Prime & I'm experiencing the same issue that you describe; the device can see each & every WiFi network in the neighborhood except mine. Please forgive my ignorance but I am not familiar with your device; is it running Jellybean? Your post came up in a Google search that I did re my problem & your post is the closest to describing my problem. Sorry if I am barking up the wrong tree but I've been pulling my hair out trying to sort this one out so any clue would be a massive help to me at this stage.

[Q] why hero can't connect to wireless n modem

I've got a D-Link wireless N ADSL2 modem,but my hero (with Shpongle 3.7 ROM) can't see it in its list. It can connect to a lot of other Wireless modem, except my home one ..
On the other hand, other phones can connect to my home wireless modem
Someone told me it's just a hardware problem: simply Htc hero is too old
Can someone explain it to me ????
Probably has to do something with Wi-Fi modes, b/g/etc, i dont know what are supported by hero but it might be too old to support newer ones
I've tried any kind of regulation: from 11 to 14 channels, but nothing changes..
I can connect to my router which has N support. Ofcourse the Hero doesn't utilize the N speed/frequency, but I can still use internet.
Sent from my Hero using xda app-developers app
colapro said:
I can connect to my router which has N support. Ofcourse the Hero doesn't utilize the N speed/frequency, but I can still use internet.
Sent from my Hero using xda app-developers app
Click to expand...
Click to collapse
Did you set any particular configuration on your hero or what else????
Can it be a different radio version???
Not the radio, the wifi chip in hero is probably too old to support that wifi version
kemoba said:
Not the radio, the wifi chip in hero is probably too old to support that wifi version
Click to expand...
Click to collapse
.. but Colapro did it ...
turk99 said:
.. but Colapro did it ...
Click to expand...
Click to collapse
He never said that he updated the baseband, you can try to update it but i doubt it will help
kemoba said:
He never said that he updated the baseband, you can try to update it but i doubt it will help
Click to expand...
Click to collapse
No, not a larger baseband but I've really meant that he said:
"I can connect to my router which has N support"
So, "how does he can connect to an N router" , is my question.
Maybe, I get something wrong??
Damned!!!!
I get mad, cause me and my rooted hero can't connect to the router, but my girlfriend can use Voip with her **** smartphone
turk99 said:
No, not a larger baseband but I've really meant that he said:
"I can connect to my router which has N support"
So, "how does he can connect to an N router" , is my question.
Maybe, I get something wrong??
Damned!!!!
I get mad, cause me and my rooted hero can't connect to the router, but my girlfriend can use Voip with her **** smartphone
Click to expand...
Click to collapse
I really dont know, try setting your router to mixed mode, b/g/n at the same time, that is how my router is set up
Perhaps a Radio update could solve your problem
We Got the Same Problem
I have the same problem and its the Radio for Sure there is nothing wrong with your wifi ,,, The Only Rom that i sow support any kind Is Elelinux-7.2-Hero-v3.9 its very good Rom but i was feel its slow on Hero that why i change it .. Flush this Rom to your hero and you see that you can connect to any thing
the radio version I've installed is 6.35.29.06 : the latest released, I know, for GSM hero...
Long time ago, I've tried to install Elelinux ROM, but it wasn't really customizable like other ones so..
I don't know if it was able to pair with wifi modem
Now I'm trying the january 2013 nightly version of Cyanogenmod... I've tried for long time Shpongle: good ROM, but at the end it went instable (or maybe my Hero is too old for apps I've installed)
Tried again Elelinux ROM just to see if it is possible to pair with my home modem... nothing to do!!!
So I think I'll go back to Shpongle (even if it hasn't italian language: just for T9 in sms, you know..)
Thanks to you all, guys
turk99 said:
Tried again Elelinux ROM just to see if it is possible to pair with my home modem... nothing to do!!!
So I think I'll go back to Shpongle (even if it hasn't italian language: just for T9 in sms, you know..)
Thanks to you all, guys
Click to expand...
Click to collapse
My Advice try FroYo (2.2) i just flush it yesterday at work and its better and faster the radio good too try the reloded one
Go to the thread from here :
http://forum.xda-developers.com/showthread.php?t=767886

[Q] Any ROMs?

Hello, I recently found a TP2 taking care of my dust and I was wondering if there are any Android ROMs for the phone. I know there are some, but I wanna know what's the ROM with the newest version of Android.
Thanks.
speakerstick said:
Hello, I recently found a TP2 taking care of my dust and I was wondering if there are any Android ROMs for the phone. I know there are some, but I wanna know what's the ROM with the newest version of Android.
Thanks.
Click to expand...
Click to collapse
the newest android version you can get is 2.3.7 gingerbread
thanks to xdandroid
http://xdandroid.com/wiki/Main_Page
battery indicator is kinda broken and also my phone used to overheat.... alot. there's also the froyo build (2.2 version), which might be more stable.
you have to find out for yourself which one works the best.
there's also an android 4 rom, but lots of features are not working. check it out yourself.
http://forum.xda-developers.com/showthread.php?t=1636005
CM7 for rhodium is interesting too, tho i couldn't get it to work somehow (difficulties flashing)
http://forum.xda-developers.com/showthread.php?t=1566955
plrusek said:
the newest android version you can get is 2.3.7 gingerbread
thanks to xdandroid
http://xdandroid.com/wiki/Main_Page
battery indicator is kinda broken and also my phone used to overheat.... alot. there's also the froyo build (2.2 version), which might be more stable.
you have to find out for yourself which one works the best.
there's also an android 4 rom, but lots of features are not working. check it out yourself.
http://forum.xda-developers.com/showthread.php?t=1636005
CM7 for rhodium is interesting too, tho i couldn't get it to work somehow (difficulties flashing)
http://forum.xda-developers.com/showthread.php?t=1566955
Click to expand...
Click to collapse
Ok, I did it, I used XDAndroid, but, is there a way to boot into android without Windows Mobile?
Thanks
speakerstick said:
Ok, I did it, I used XDAndroid, but, is there a way to boot into android without Windows Mobile?
Thanks
Click to expand...
Click to collapse
OMGB on NAND
http://forum.xda-developers.com/showthread.php?t=1347321
http://forum.xda-developers.com/showthread.php?t=1965459
Ok... I tried to install xdandroid GBX0, but wifi doesn't work, and then I went back to FRX0 and wifi doesn't work either... What do I do?
Help!
Thanks
wifi problems?
speakerstick said:
Ok... I tried to install xdandroid GBX0, but wifi doesn't work, and then I went back to FRX0 and wifi doesn't work either... What do I do?
Help!
Thanks
Click to expand...
Click to collapse
Why do you say the wifi doesn't work? I've been using Android on my Rhodium since June 2012 and I don't have problems with wifi--bluetooth, yes, but not wifi.
What makes you say it doesn't work? Is it not showing any wireless networks?
what version of the rhodium do you have? RHOD100? RHOD400? I have a RHOD400, and the devs are also using RHOD400's. They don't guarantee complete functionality on non-RHOD400's (that's actually mentioned somewhat by wizardknight at the end of post #1 of the GBX0* thread that wizardknight linked above
Hello, I too am having lots of troubles with finding a ROM that will work on my RHOD300. I started the whole install with a GBX_3.4.35_Full, then the GBX_3.4.26.13_FULL then the OMGB 1.2.3 May 4 and finally the OMGB Jan 16, and all of them have given me a non-working wi-fi. When I enable the bluetooth it actually turns on ok.
I've been using my HTC TP2 for 4 years as a WinMO phone and finally decided that I'd give this Android thing a try. The wi-fi has been working for me all along.
When I first installed the GBX it was giving me Wi-Fi error (viewing in Wireless & network settings). After I switched to the OMGB ROM I'm now getting a Wi-Fi turning on... and the option is grayed out.
I've been searching around and reading through these forums and I'm trying to find solutions, but nothing seems to work. The wifi-nvram-generic.txt file option I wish I could try but unfortunately I don't know the phones mac address without booting back into a WinMo phone.
I would be grateful if somebody could help me sort this out as I really do need to have wifi on my phone, otherwise my smart phone isn't so smart after all...
I've taken my RHOD100 out of the dust, and fired it up to NAND flash it with te 2.3.7 xda ROM. I used the GBX0*+3.4.26.13 Full for my device. Although it's not very snappy, it's acceptable after recalibrating the touch screen. Don't expect miracles. Wifi is working fine. Haven't tested BT yet.
The 3.4.35 version did boot a bit, but didn't get past the bootscreen, which seemed to be in an unending loop.
I doubt the GPS is working.. GPS test didn't get a fix in 15 minutes and did not see any satelites. Also no support for front camera... but hey.. who cares

Categories

Resources