Related
I'll start this thread in the hope that there'll be some good news soon.
I got my Touch Cruise on Friday and the device is absolutely fantastic but there is one huge problem with it. Using it either with the bare screen or with the screen protector supplied in the box, the smudges that get onto the screen are a real issue. It's not a case of cleaning it every day when you get home, it really is a case of pulling out a perfectly clean device, flicking up the cube to fire up the calculator, doing 60 seconds of calculations and then putting it away and even after that the screen is covered with smudges to an extent that bugs me. The saving grace is that, if a good screen protector can help solve this problem, then it's easy to apply as an aftermarket solution.
Do other people see the issue to the extent I do? (And my hands are actually fairly dry, I often have issues getting through fingerprint recognition at US immigration because there isn't enough grease on my fingertips.)
I'm told that Brando are working on a protector and I just had a quick play with my old O2 XDA Orbit which has a good screen protector on it (not a Brando but one of their big competitors whose name I forget but is another make that people tend to recommend) and it seemed to me that it was picking up far less muck than my TC one so maybe Brando or someone can ride to the rescue on this one.
- Julian
There is another thread about screen protectors here.
I use the supplied one without any problems different from any protector I have used. Just get the Veripart screen cleaner and clean your screen with it about once a week. looks like it leaves a coating on the screen. I am not sure about that, but my screen is shiny and nice
By the way, how can you get smuges from a non-greay finger
victoradjei said:
There is another thread about screen protectors here.
Click to expand...
Click to collapse
Ah. Thanks for that. I was trying to do the right thing by posting into the "Accessories" sub-forum so that is where I looked for a previous thread but I did just find the other thread in the main Polaris forum, funnily enough not by looking through the forums but because that thread is the second hit on Google when I did a global search for "veripart screen cleaner" as a result of your reply. I'll definitely try Veripart.
Re: "how can you get smuges from a non-greay finger", I guess they're not totally non-greasy, just less greasy than average .
I'll still get a new screen protector for my TC though because the one that came with my device seems to have a little bit of adhesive missing right down in the bottom left corner, luckily only on the bit that covers the screen surround but, because it won't stick down, it makes it look as if there is a water stain on the device. I also find that the factory screen protector does dull the sensitivity of the screen a bit.
- Julian
I have the same problem with the supplied screen protector.
I found out that Brando will come out with two types of screen proctectors of which on is anti-glare. That's the one I want to try.
Just ordered this one:
http://cgi.ebay.de/ws/eBayISAPI.dll...em=160199157845&_trksid=p3984.cTODAY.m238.lVI
If you don't know German, look at the picture depicting the structure of the material. Seems to be nice - anti-fingerprint, anti-glare, etc. Will report here as soon as I get it. There is no picture of the protector but I strongly hope it will cover the whole surface and not just the display area.
ingenious said:
Just ordered this one:
http://cgi.ebay.de/ws/eBayISAPI.dll...em=160199157845&_trksid=p3984.cTODAY.m238.lVI
If you don't know German, look at the picture depicting the structure of the material. Seems to be nice - anti-fingerprint, anti-glare, etc. Will report here as soon as I get it. There is no picture of the protector but I strongly hope it will cover the whole surface and not just the display area.
Click to expand...
Click to collapse
It looks very interesting. I hope it works out for you. I'll look forward to hearing how it works.
I just experimented some more with my old (now dead) Artemis. Obviously with the device being dead all I can do is wipe my fingers and thumb around the screen with it switched off and then look at how marked it is. This is actually just fine though because the marks show up most when the device is off so the fact that the device doesn't power on isn't really an issue for these tests!
Anyway, I found the email confirmation for when I first placed the order and it was a Martin Fields Overlay Plus Screen Protector and my experiments above confirm in my mind that a good screen protector does make a huge difference as far as fingermarks are concerned, my old Artemis with the Martin Fields protector seems to pick up maybe 10% of the fingerprints compared to the in-the-box HTC protector on my Touch Cruise under about the same amount of finger dragging on each screen.
- Julian
Brando is now selling the antiglare screen protectors. Emailed them and they said that they cover the whole face, not just the touch screen portion. You can get them here:
http://shop.brando.com.hk/prod_detail.php?prod_id=02323&dept_id=&cat_id=0019
db
No, I'm not buying before I see it how it looks like. As I wrote above, I ordered one from eBay. It is 0.5mm more narrow than the screen area. But the worst is, there's not a hole in the surface for the secondary camera - there's a whole area cut out, like with scissors. Otherwise, the surface seems pretty diffuse. I haven't tried it yet, because if I remove and ruin my current protector and I don't like the new one, I won't have any
So I'm waiting for responses/pics from other protectors
Brando's version is unfortunately like the one ingenious got off of eBay - with the large cutout vs. individual holes. Can't imagine it would have been that hard to cut them properly I'd prefer Brando quality with HTC fit.
db
dcbehan said:
Brando's version is unfortunately like the one ingenious got off of eBay - with the large cutout vs. individual holes. Can't imagine it would have been that hard to cut them properly I'd prefer Brando quality with HTC fit.
db
Click to expand...
Click to collapse
I bought one from Brando's for my Orbit 2.
Quality is top as usual.
But:
I think they do the large cutout to make them fit to both, the cruise and the orbit 2.
The result is: You can use them for both device, but they do fit perfect neither for the polaris nor for the orbit 2.
Especially with the orbit 2 there is a large gap at the top of the protected area.
So I have to say, I was used to get better quality from brando's
JueLue
Shame, shame... Hopefully they will make them better at some point. Now I don't want to put mine because I'm afraid that if I don't like it, I won't be able to put the original one again
as i said in the other post..
I ordered both versions of the regular screen protectors from DuraSec. (not the liquid one)
I will post some photos and comments when i get them.
xrrkrrkx said:
as i said in the other post..
I ordered both versions of the regular screen protectors from DuraSec. (not the liquid one)
I will post some photos and comments when i get them.
Click to expand...
Click to collapse
Thanks. Look forward to your post as my standard protectors's already looking suspect.
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
hamishmacdonald said:
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
Click to expand...
Click to collapse
I've first put the one delivered by HTC with the Polaris. Except the fact that the sticker perfectly match with the Polaris Form, it need to be cleaned at least 50x per day..
I've finally buy a set of universal screen protector. Of course you've to cut it by yourself, but the quality is pretty excellent and the price is really competitive (5 pieces for a price less than for 1 brando).
hamishmacdonald said:
I ordered the more expensive ("self-healing") protector from Durasec and found it had the same problem as the Brando anti-glare protector: it refracts the light coming from the touchscreen, giving the pixels a broken-up, rainbow effect. Not nice or useful.
Guess I'm going to buy some more HTC ones, even though I ended up crumpling the first one out of frustration (bubbles, dust, etc).
Click to expand...
Click to collapse
Why the HTC ones rather than the Brando Ultraclear? The thing I hate about the HTC protector is that it is no better than a bare screen as far as fingerprints are concerned. There is a thread running in the main Polaris forum (although a request has been made to the moderators to move it here) where other people are confirming how awful the HTC protector is re fingerpriints and also that the Brando UltraClear, although not as good as the AntiGlare regarding resistance to fingerprints, is a definite improvement on the HTC protector.
I confess that I'm still using the HTC protector but that's because I put it on my device immediately and now it's on I'm waiting a bit to decide what to replace it with. I don't like the Brando cutout but I think if pushed now I'd probably buy one of each Brando and see if I could live with the optical distortions of the AntiGlare and, if not, then use the UltraClear.
- Julian
P.S. I share your frustration re fitting these things; one of my least favorite activities.
I didn't try the Brando 'ultraclear' one -- I guess because I used one of these on a PDA years ago and found it to be 'ultraglare'. If I were sitting anywhere near sunlight, the screen became a mirror.
I suppose in the time since that's just become normal, as screens like the Touch Cruise are very shiny.
Looking at the various posts I think I'll go with the Brando UltraClear...
10$ + 3$ shipping is not so expensive (let's hope it will not be trapped by customs, in France that's pretty expensive even for a 10$ order).
Anyone aware about a way to get them from a European reseller instead of ordering directly to Brando in HK?
Thanks
DuraSec protectors
Hello all....
as i promised earlier i would report back once i got my DuraSec protectors and let you know how they are.
i just got them last night, so i ripped my HTC OEM one off, and put the cheaper "ClearTec" one on. on first impression, it is a slight bit TOO thin, as it is quite hard to get on without flipping and flopping around. Which in the end causes many small bubbles.
After some fiddling, i have it on looking semi-OK, and it doesnt mess with the screen clarity, nor refract light in any strange way that i can tell.
i do have a feeling that it will not last very long... but then again they market it as a temp. protector.
i will get back when i use the "HighTec".....
This is a possible way to improve the standard HTC screen protector which I'm pretty happy with except for one big issue, it offers absolutely no additional resistance against getting fingerprints all over the screen when not using the stylus and this is a big frustration for me.
Recently I decided to clean my protector using regular window cleaner that you can buy in supermarkets (I'm in the UK so I used "Non smear Windolene for glass and shiny surfaces"). I now only bother to wipe down the screen with a cloth every few days rather than after every few minutes of use which is what I had to do before (and yes, I do wash my hands very regularly!).
It's probably partly due to the fact that I've got better at remembering to try to use the fingernail side of my fingers rather than my fingertips but I think that a large part of it is due to the cleaner leaving some sort of coating because even when I deliberately do a few swipes with my thumb, which before would have left marks after even a single swipe, it is now pretty clear.
I didn't spray the cleaner straight onto the device by the way, that just seemed too risky, so I sprayed it onto a paper kitchen towel and then used that to apply the cleaner onto the screen.
For me I think this has improved things sufficiently that I might well just stay with the supplied protector.
- Julian
When I opened the box for the TD2 there was a screen protector supplied, I initially thought that I would use it until I got a chance to buy a better one, but now I am so impressed with it (fits perfectly, applied easily, hard wearing, and I can't tell its on there) I want to find out where I can get replacements when it wears out.
I looked on HTC and found this :http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=178415, but does anyone know of this is the same as the one supplied in the first place.
Has anyone brought one from here??
I believe they are, i have ordered some last week myself but from here:
http://www.prepaymania.co.uk/mobile...pdia2-diamond-2-screen-protector-sp-p240.html
They're in the exact same packaging as the ones shown on htcaccessories.
Hope this helps!
It does help, especially if they are the right ones, as the price is a lot better than HTC (surprise there!)
When they arrive can you let us know what they look (and feel) like, the one I got with the TD2 came on an over-sized clear back-piece with something like 'TOP' and 'FRONT' stamped on it, and it was hard, as opposed to soft plastic.
I've seen some which don't have a hole for the front facing camera, they just have a U shaped cutout, gives the game away that its a screen protector, unlike these.
Yeah they seem exactly the same as the one I took off however as I bought my phone second hand I cant compare the back piece to the original.
The sticky side cover on these is transparent. The plastic isnt soft but it isnt non-flexible, the one I got for my digi camera for example is more rigid. The hole for the front facing camera is a small circle, not a U shape, as with you I purposefully looked for one without the U.
I did get a bit snap happy and I've put a set of photos on flickr, should be able to find them here http://www.flickr.com/photos/[email protected]/sets/72157621095550158/
edit: the last 5 photos are 'after', the rest are 'before' the new protector.
Well thanks a lot for all the info, this has saved me hunting for the right (for me) screen protector, and who'd have known that HTC would make it!!!
Also at the price you got them for it makes a difference, last time I brought a good screen protector I got it from the states and it cost me loads!
Great
Just to let you know ppl - watch out for touch pro 2 full housings sold by several sellers on ebay. They all look very much the same, same photos everywhere, there are red and blue ones. Got me the red one, wasted over 50 quid and nearly wrecked my phone trying to fit it. THEY DON'T FIT REGULAR, UNBRANDED TOUCH PRO 2 despite the description.
- You literally need to cut large pieces of plastic off to fit the mainboard in
- you lose GPS (there is no antenna in the housing)
- it is difficult to get the Bluetooth working (I had to bend the metal connections on the mainboard),
- fitting the keyboard surround causes that phone doesn't recognize that keyboard is out anymore (no backlight, no landscape)
- hinges are horrible quailty, they never close fully, make weird noises
- the keyboard doesn't fit the rest of the set (cut-outs for caps and fn lights are in wrong places)
In short - the only fully usable thing is the back cover (nice one, i like it) and the bezel (nice looking but slightly different shape than original, some cases won't fit anymore).
Just lost two days of my life. I hope you won't.
Here's the very one I bought:
http://cgi.ebay.co.uk/for-HTC-Touch...ies_MobilePhoneFascias_JN?hash=item45f09fc5db
Thanks for letting us know
Sadly all these "cases" for the phone tends to be tough to put on. I had to put on a FULL body shield on the phone before I tried these casings.
It hurts me when I have to do it VERY HARD to snap it on. The end results are decent, but the shield pushes the case a bit out because the phone becomes a bit thicker.
Post #1 and title updated.
*Note i have not experienced whether the product lives up to its name or not. I only JUST placed it on my device. This is simply my first impression.
**I included pictures of my device compared to the back parts of the adhesive so you can fully grasp the wonderful "custom to fit" experience.
I just now got as close to perfection as i think i am going to get with placing my "custom to fit" screen protector onto my device. At very first glance i saw that their were going to be some slight imperfections. The random circle on the top right of the adhesive was a dead giveaway. The cut out they have for the top speaker and the bottom row of buttons is hardly CLOSE to the size it should be. It is much too big. I am not sure if it is clear enough in the pictures but their is excess adhesive on the sides. I figured they may be meant to fold down to protect a minuscule amount of siding. At first i could not get it to stick on the sides. But after giving it a few minutes to settle and let the application spray* dry, it seems to be holding. However, the border has really ugly bubbles from the very tony inlay of the front of the phone. The instructions say that MICRObubbles will disappear in their own after a couple days... i hardly find these MICRObubbles though. We will see. I think it is almost supposed to have a "melting" effect on the device. Like heated plastic sort of taking the proper shape over the device.
Now we move onto the back. You will see that i have been given 3 holes instead of 2. (2 being the camera lens and the button underneath). I have no idea what the third was meant for.... I can also forget about taking the backing off of my device as it is now sealed shut with the plastic invisible shield. This doesn't bother me that much since i rarely ever have to take the back out but i know their will be a day where i will need to.
All-in-all the product LOOKS promising still. The bottom line here that i would like to make is that i have NO idea what TouchPro2 they are basing this off of. but it is far from mine. Too far. I need to check but i am also fairly certain they ask for your provider too (in case the device is different than others)
I am also still wondering about the excess sides. it is very random in the back but they make no mention of needing to trim the shield.
*They give you a spray that you use on your fingertips and the adhesive so that a. you dont give it fingerprint smudges and b. it doesnt fully stick right away so that you can "slide" it into place. I found that "sliding" it around was impossible because it still stuck but it did not stick enough to the point i was unable to retry.
I really hope this means something to somebody. Had i read something like this before hand, i may have thought longer on buying the product. I will be sure to write more in the next few days. By the feel of the material on my phone, it seems like it could work really well.
I would also love to know other people's experience with this product and even maybe correct me if anything i complained about was just due to stupidity.
It very much looks like you bought Invisible Shield for the wrong Touch Pro 2 model.
It looks like you have the one for the unlocked/unbranded model:
http://www.zagg.com/invisibleshield/htc-touch-pro-2-cases-screen-protectors-covers-skins-shields.php
When in fact you want the T-Mobile model.
http://www.zagg.com/invisibleshield/htc-touch-pro-2-t-mobile-cases-screen-protectors-covers-skins-shields.php
It looks like the shape of your T-Mob branded TP2 is actually quite different from the unbranded version. The shape of the shield is therefore quite different between the models, based on the pictures on the Zagg website. Also, the layout of the battery cover is totally different, which is why the cutouts on the shield don't match your battery cover. This also accounts for the 3rd small hole on this piece. In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Not to be mean but it's really obvious that it wasn't made for a T-Mobile Touch Pro2 and you should have known that it wasn't the right one.
Just going to the Touch Pro2 forums you can see that there's different versions of the device and ours is usually always referred as the "T-Mobile Touch Pro2" when being specific.
The cover does seem worth buying though.
Yeah i just inquired about it. I did buy the T-Mobile one and they just sent the wrong one.
redpoint73 said:
In addition to the camera lens and speakerphone button, the unbranded TP2 has small holes for the speaker just below the speakerphone button, and that is what the 3rd hole in the shield is for. I'm guessing on the T-Mob version, the speaker hole is located as part of the larger cutout/hole.
Click to expand...
Click to collapse
Oddly, the Tilt2 had little holes in the back case in the same spot, despite the fact that it is just the battery sitting behind the holes. I always figured it was just a way to give water quick access to the battery compartment to turn that little strip pink incase we ever dropped it somewhere damp...
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
GrandMasterPlank said:
I've just dropped my three month old Honor 7 and the screen is cracked from the bottom right corner. I bought it new from Amazon UK (sold by Amazon EU S.a.r.L.), it wasn't through Vmall. Is the screen covered under any form of warranty? If not, where's the cheapest place to get it fixed in the UK?
Click to expand...
Click to collapse
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
honorable said:
I think the screen is guaranteed against manufacturing faults, but not the glass against accidental damage.
When I trod on mine in the back of a car, I called Hihonor support and they quoted me £70-80 + £15 inspection and postage charge, which I thought was reasonable, however when calling their repair centre to book mine in they laughed and said it would be at least £130 for Honor 7 screen replacement - they can't do just the glass as it's all bonded to the digitiser and screen.
I decided to buy a new screen (with glass, digitiser and interior frame attached) from eBay for about £40 and fitted it myself. Not as easy as the videos on youtube make it look - it is very difficult to get apart for a start, then the battery is hard to remove. Also, various parts (including all the buttons, vibration motor etc have to be heated with a hairdryer to separate them from the old screen frame and re-installed into the new frame.
Luckily mine is working perfectly now, although I think the screen may not be quite as bright as the original one was.
I wouldn't try to buy just the glass, or even the glass and screen (without the frame) - you'll never get it to look as good as new.
Good luck and let us know how you get on with having it repaired or doing it yourself.
You can PM me if you need any advice
Click to expand...
Click to collapse
Thanks dude, much appreciated. I was into it until you started mentioning removing parts by heating them up then thought I'll leave it to the experts. :laugh: Honor UK have quoted me £80 as it's a pretty clean break so I'm going to give them a go and see what they say. If they do the same as they did for you, which they said they wouldn't!, then I'll go with that. Will let you know.
I'm surprised their aren't more threads on hear about replacing screens because this phone does feel fragile despite being reasonably weighty so I'd have thought there'd be loads of cracked screens out there. I dropped my old S5 a couple of times from higher up and the screen survived both times. Am now thinking a tempered glass protector might be in order for the 7 :fingers-crossed:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
honorable said:
Mine had a glass protector, but I guess they don't cope with treading on! I've put one on the new screen too.
I also have an S-line gel case which acts as a bit of a buffer against drops.
Let us know if you get yours done for £80
Click to expand...
Click to collapse
After reading reviews of the official Honor repair company, SBE Limited, and how they appear to be happy to scam people I thought I'd have a go myself. So I bought a replacement front glass and thought I'd give it a go.
Dissembling the phone is really easy, once you've got the hang of the clips holding the back on, and taking it all apart was easy. What wasn't so easy (read nigh-on impossible) is separating the front glass from the digitiser. I tried and tried and in the end the touch screen just split into a number of layers so I'll need to order the complete screen assembly. My concern is you mentioned you bought one off ebay and it wasn't as bright as the original. From this I'm guessing it wasn't an original screen? I'd like to get an original if I can. Do you have a link to the one you bought? How long did it take coming from China?
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
boroleigh said:
Don't know if this is relevant but under the hicare app it allows you to price up replacement parts. Could not find any mention of the Honor 7 but it did list the Honor 5X as £35 so might be worth trying this way to see if they do have the Honor 7.
Click to expand...
Click to collapse
Thanks for the nod. Tried it but no joy. For some reason they don't support the Honor 7. Very Huawei tbh, they're left hand doesn't know what the right is doing. A bit all over the place.
honorable said:
I got mine from eBay seller called bestsellstuff.
£35.27 at the moment and mine came quicker than expected with 2nd class delivery free.
I don't think any of the eBay sellers will say they are genuine screens, but I think they probably all are - I can't imagine they would be cheap to replicate. Maybe they are seconds or find their way out of the factory somehow....
Click to expand...
Click to collapse
Great stuff, have just ordered the last one they had in stock in they're in France also, so should be quicker than coming from Hong Kong. Funny thing is I hadn't seen their add before, it hadn't come up with my ebay search for 'Honor 7 replacement screen'. Without having the name I'd not have found it and paid more so thanks again! :good:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.
Take photos as you go along incase you need to go back a astep.
I'm not sure if you got to the stage of removing the battery before - it is stuck down very strongly. I just gradually prised mine out, but you might find heating it a bit will release it easier. There aren't any cables underneath it (as some other Honors have).
When heating (with a hairdryer) the small bits of circuit board and components that need to be transferred to the new frame, only do it for long enough to get them to peel off (I used tweezers to do this).
When you come to install each part, there are very small bumps in the frame that you need to line up the equally small holes on the part - makes positioning them easy! Then use a plastic tool to press them firmly onto the frame.
When you come to put everything back, make sure that the very small narrow ribbon cable that goes under the tiny flip-up bracket (the connection to the smart key) goes in fully until it stops. I didn't put mine in completely and the smart key wouldn't work until I re-did it properly.
You may notice that there is a square-ish hole and some slots in the frame (under where the battery goes?) on the new frame which aren't on the old one. If so, you might want to cover them up with some black gaffa tape or thin card - I suspect they are the cause of some light areas at the very sides of my screen, but I don't want to strip mine down again.
Click to expand...
Click to collapse
Great tips, thanks again. I'll be sorting it as soon as it arrives. Will report on how I get on.
honorable said:
Here are a few tips for when it arrives:
Don't peel off any of the blue plastic film until you're ready to do each part - it's very sticky underneath.......
Click to expand...
Click to collapse
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
GrandMasterPlank said:
Sorted!! Thanks for the advice, was really useful. Took it all on board, took my time (about 1hr) and fitted the new screen. Clipped it all back together and worked perfect first time. £35 to get your screen fixed, amazing. I'll always fix a cracked screen from now on, these repair companies are just profiteering.
Thanks again.
Click to expand...
Click to collapse
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
honorable said:
Great news!!
Did you have to cover the square hole and slot to stop light leakage?
Also, is there any light bleeding at the sides and is there any difference in brightness from the original screen?
Click to expand...
Click to collapse
The screen and housing isn't original Huawei, it's a pattern unit but tbh it looks totally identical in use, no less dim than the original screen. There's also no bleed at all. There weren't any hollows and slots to fill with card under the battery. The only hollow was at the base of the battery as it sat slightly higher up (towards the top of the phone when laid flat) in the casing so I filled that with folded card.
The only slight issue is that the screen shape (rounded corners of the glass) when looking at the phone from the front doesn't fit into the corners of the casing absolutely perfectly. Tbh only a phone nut would notice it, wouldn't be an issue to anyone else.