i have problem with my Car BT speaker
its Motorola T305 ... with my previous tytenII it was sending a msg to connect as soon i start it when my ppc bluetooth on
but with my new HD no way .. every time i'm searching to add it ..nothing appear as its invisible
why with HD ?!
is should be earliest than tyten !!!
Thanks alot
best regards
Hi there
This might be a bit of a silly question but is the speaker in pairing mode when youre searching for it if its not your phone wont find it anyway if youre unsure how to put it in pairing mode try this
To initiate easy pairing, power on hands-free
speaker by pressing and holding the Power
button until the indicator light becomes
steadily lit in purple. Release the button and,
after a few moments, the indicator light will be
steadily lit in blue to indicate hands-free
speaker is in pairing mode then search for speaker with phone
hope this helps
Dave
dave_024 said:
Hi there
This might be a bit of a silly question but is the speaker in pairing mode when youre searching for it if its not your phone wont find it anyway if youre unsure how to put it in pairing mode try this
To initiate easy pairing, power on hands-free
speaker by pressing and holding the Power
button until the indicator light becomes
steadily lit in purple. Release the button and,
after a few moments, the indicator light will be
steadily lit in blue to indicate hands-free
speaker is in pairing mode then search for speaker with phone
hope this helps
Dave
Click to expand...
Click to collapse
Thans u Dav
but
the problem that my in pairing mode
and easly can find BT speaker with my nokia
but with HD no way .... and i dont know way
i was using WM6.5/wm6.1 with tyten II ....and i didn't face this problem at all to connect it
till i purchased HD .. i thought the problem with the Rom
but all 5 roms that i checked it same problem i faced
i think there somthing different with HD or some setting have to be make .. i don't know !!!
Related
Hi all
i installed the sin rom :
O2 XDA II->WM2003SE->Sin->Merged->v2.0
http://forum.xda-developers.com/viewtopic.php?t=16916&postdays=0&postorder=asc&start=125
The rom is great But two problems I face,
First during a long phone call, may be when the device goes on standby the call is hanged up?????
second I installed the Bluetooth tools, which as we all know is is still nut compatible with wm2003se but during a phone call sometimes the speaker and mic on device continue working although I am having a conversation using the but headsets
Third when I plug my earphones in the device to hear music and a phone call comes in, instead of hearing the ring only in the earphones' the device rings as well
can any one help
Re: help with O2 XDA II->WM2003SE->Sin->Merged->
k_blal said:
First during a long phone call, may be when the device goes on standby the call is hanged up?????
second I installed the Bluetooth tools, which as we all know is is still nut compatible with wm2003se but during a phone call sometimes the speaker and mic on device continue working although I am having a conversation using the but headsets
Third when I plug my earphones in the device to hear music and a phone call comes in, instead of hearing the ring only in the earphones' the device rings as well
can any one help
Click to expand...
Click to collapse
Hi there, I installed the same rom, but I didn't have your 1st problem, 2nd problem YES.
1st problem, unfortunately the longest call I had was about 7 minutes recently but everything was alright, no cut off. How long was your call and what time do you set the device to go standby ? "Turn off device if not used for ? minutes".
2nd problem, I wouldn't have known this if you didn't bring it up as I rarely use the earphones. But I can confirm that I too experience the same thing. The ringer goes off even when the earphone is plugged in.
Re: help with O2 XDA II->WM2003SE->Sin->Merged->
k_blal said:
second I installed the Bluetooth tools, which as we all know is is still nut compatible with wm2003se but during a phone call sometimes the speaker and mic on device continue working although I am having a conversation using the but headsets
Click to expand...
Click to collapse
I have the same problem. When I', using my phone and have it in my handsfree holder in the car - both the bluetooth and the speakers turn on, and therefor I can not use my bluetooth headset....
l bought a HTC headset BH S100, for my blackstone, and the problem is that my device doesn t recognize the headset.
l turned on the headset until it started flashing blue and red, , then in my device l pushed add new bluetooth headset. " no nearby bluetooth headset was found". get as an answer
ROM version: Dutty s HD 2.5 extreme
ROM date 01-04-09
Radio Version 1.13.25.24
Blac100 32M
SPL 1.14.Olinex V6
win mobile 6.1
any suggestion???
I had a similar problem - and it was my fault.
On my headset, a blinking light means the headset is on, but it does not mean it is ready to be paired up with the phone for the first time.
I had to hold the power button a few seconds longer until the light stayed on (not blinking).
At that point the headphones are ready to be paired and the phone can find them.
You only have to do that once. Later on, it is enough to simply turn the headphones on (in other words stop holding when the light is blinking).
If you flash a new ROM on your phone, you'll have to pair the headphones again.
Let me know if that worked for you.
working
thx guy, u are a genius, it worked like a charm in 2 sec.
I'm glad to hear it worked!
Ok i just bought this headset and I must say it is really great and everything works.
it has in ear headphones it is really great the sound is great. all the buttons work so no problem.
what i liked about this headset was when someone calls you you see the caller on the screen so you know who calls you. it has a mic on the cord so you can talk with the headset. u can change songs and adjust the volume. the volume is not the phone volume but the headset volume.
First Connection:
I turned the headset on and it wanted to sync with a phone. On the hero i searched for bluetooth devices and found the headset, i Clicked on it. it connected without any problem.
Issues:
I only have one problem when i listen to music it lags sometimes. i don't know if it comes from the headset or from hero. I thought when the screen goes to standby the bleutooth doesn't work 100% to save battery but i'm not sure. If someone knows what the problem can be please let me know how to fix it. maybe its with most bluetooth headsets, if someone uses bluethoot headset without a music lag please let it know.
Battery Life:
I received my headset today so for now i can't tell much about the battery life. i used it today a little bit. the battery life today was great. i started using my phone at 8 Am the battery was fully charged. i made some calls total 15 minuts. i used 3g to surf the internet for 1 hour, i played some games it also total time of 1 hour, i connected the headset with the phone it was connected for 4 a 5 hours with 45 minuts music listening. the battery showed 15% at 3Am so i used my phone for 19 Hours and then it showd 15% battery life. i think that this is amazing. i will let you know when i tested it with full day connected with the headset but for now you have to do with this.
commodoor said:
Ok i just bought this headset and I must say it is really great and everything works.
First Connection:
I turned the headset on and it wanted to sync with a phone. On the hero i searched for bluetooth devices and found the headset, i Clicked on it. it connected without any problem.
Click to expand...
Click to collapse
I have this same SE headset but it does not pair with my Hero (white unlocked) when I do a scan it wouldn't show up at all on the phone. I've tried the new update from Modaco, no joy.
The phone can see & pair with a regular headset (not stereo) and also with a couple of phones (iphone 3GS/SEw910).
Any ideas?
Thanks
When you wan't to connect the headset make sure that the headset shows the sync icon. it is the icon where the headset is shown and then sync icon and the phone icon. if this shows up you will be able to sync it with the phone. to get it in this state you have to hold the on/off switch till you see the sync icon.
I have the Brown HERO with modaco 2.0 rom. i didn't had any issue's with connecting
commodoor said:
When you wan't to connect the headset make sure that the headset shows the sync icon. it is the icon where the headset is shown and then sync icon and the phone icon. if this shows up you will be able to sync it with the phone. to get it in this state you have to hold the on/off switch till you see the sync icon.
I have the Brown HERO with modaco 2.0 rom. i didn't had any issue's with connecting
Click to expand...
Click to collapse
Yes! that did it, I just didn't had to do that before with my MDA Vario2. Thank you very much. By the way, I don't have any problems with the sound skipping or lagging which was present on the MDA but there was a fix/tweak for that.
One thing, there is no headset icon in the notification bar like when you plug in a wired headset, is this normal?
Yes i don't have the icon either. but the bluetooth shows conncted. if you change the volume on the phone you will see the headset and bluetooth icon.
i foud what was cousig the lag, the background proceses are the reason when you close everythin with taskkiller it will work. the lag comes when its checking mail or when i recieve a sms.
maybe overclocking will fix this issue but i dont want to do that (bad experiance).
commodoor said:
Yes i don't have the icon either. but the bluetooth shows conncted. if you change the volume on the phone you will see the headset and bluetooth icon.
i foud what was cousig the lag, the background proceses are the reason when you close everythin with taskkiller it will work. the lag comes when its checking mail or when i recieve a sms.
maybe overclocking will fix this issue but i dont want to do that (bad experiance).
Click to expand...
Click to collapse
I used to have stutter problems when connected to my car stereo via bluetooth.
It was caused by the wifi being on. Switching it off removed stutter.
My wireless is always off when i leave home, maybe the first day the wireless was one and then where there so many lags. but now when i'm listning there arent so many lags anymore.
Like i sayd it its happends if you run other processes. i hope this will be fixed in android 2.0
do you know how can i open this BT headset to change the battery??
Bluetooth Headset HBH DS970
I have had my bluetooth headset plugged in for hours and the red LED IS ON. It is my understanding that after fully charged the LED will go out. The LED Will not go out when I have it charging. I have attempted to pair the headset but when I hold the power on button the LED never flashes blue.....any ideas?
I'm having a weird issue with the volume on this phone. I always keep my volume controls at maximum unless I need to change it later, but with this phone, even though I know the volume is at max, when i start a call, the call volume immediately drops lower and i have to turn it back up mid-call. It also drops the headset volume after unplugging a 3.5mm cable. I'm assuming that's in case you're listening to music with headphones and accidentally pull it out, so you don't end up blasting music in the middle of your office, but i use it in my car and it's an inconvenience to have to turn it back up every time i unplug it.
does anyone know of a fix for this, or did i miss a sound option for this somewhere?
TallgeeseIV said:
I'm having a weird issue with the volume on this phone. I always keep my volume controls at maximum unless I need to change it later, but with this phone, even though I know the volume is at max, when i start a call, the call volume immediately drops lower and i have to turn it back up mid-call. It also drops the headset volume after unplugging a 3.5mm cable. I'm assuming that's in case you're listening to music with headphones and accidentally pull it out, so you don't end up blasting music in the middle of your office, but i use it in my car and it's an inconvenience to have to turn it back up every time i unplug it.
does anyone know of a fix for this, or did i miss a sound option for this somewhere?
Click to expand...
Click to collapse
The S3 had the same thing with the headset volume drop. I hate it cause I always keep it on the same volume for my car when I plug it in. I was never able to find a fix for the S3 besides ROMing so hopefully something comes for the note deuce.
Tap'n
techgov8 said:
The S3 had the same thing with the headset volume drop. I hate it cause I always keep it on the same volume for my car when I plug it in. I was never able to find a fix for the S3 besides ROMing so hopefully something comes for the note deuce.
Tap'n
Click to expand...
Click to collapse
Yeah, it is really annoying. Not a bad feature, just let us turn it off if we need to! Ugh.
I found several volume control apps/widgets that feature "volume locking". i'm going to try that, but now problem is the volume controls on the side are also locked and you can only control the volume through the app, also very inconvenient...
Success! I can confirm that VolumeManager can lock individual volume streams from changes based on criteria, including plugging in and unplugging the headset! It's also good for the call volume as I never turn it down anyway, i just keep that stream locked at all times.
TallgeeseIV said:
Success! I can confirm that VolumeManager can lock individual volume streams from changes based on criteria, including plugging in and unplugging the headset! It's also good for the call volume as I never turn it down anyway, i just keep that stream locked at all times.
Click to expand...
Click to collapse
I tried VolumeManager and put the keep setting on and the volume still changes
Tap'n
Hello,
I'm new to this site so apologies if I'm in the wrong place or this has been raised before but I've googled with no joy..
I have a Samsung Galaxy S3 i9300 uk unlocked.
For the last month or so m having problems with Bluetooth devices and loudspeaker (seems to be connected)
I can connect to bluetooth devices fine, beats wireless and vw car bluetooth.
It connects automatically and I can talk and hear fine, after a while the sounds drops and it goes echo like, I can't hear the other person at all but on the phone the green button Nader headset is still lit up and the connection is still made. I have to press the headset button to in light it/disconnect it and then re press to connect / light the button back up. I then can hear the person again but it does this continuously throughout the call. Listening to music via Bluetooth is fine and this problem doesnt arise.
When using loudspeaker it's the same, will go to phone (button lit) and I have to press it again twice to disconnect and reconnect.
Can't find out why this happens. I've done a factory reset and it allowed me a few days of it working fine but then goes back to normal.
Anyone else having this problem? I've read a lot about it disconnecting and having to repair but mine seems to stay connected but just drop the sound?
Cheers
Syak2008
same issues
I am having the same issues... did you find the solution?
Same issues too.. i thought it was my ford bluetooth (POS!)