Related
Could anyone help please? I have searched and searched to no avail..
I have the xda 2 and have had all sorts of problems running some software but the phone part appeared to be ok !?
I can now run all the things I want and they work,usually, ok. However the phone is now getting so bad it is beyond belief.
If I do receive calls I cannot answer them - well this is what I thought for the first few weeks. It now appears that I have to just keep saying "hello, hello, hello" until I can hear the calling party. I used to hang up because nobody appeared to be there.
I thought an radio rom upgrade to 1.19 may be the answer and tried (4times) to do that: I click on the HimaUpgrateUtHTC and away it goes...but it disconnects the Activesync connection, does not reconnect and then comes up with the error connection code 101.
1. Will the upgrade cure my phone probelm - if not , any other suggestions, please
2. How do I upgrade only the Radio when the Activesync connection is shut down by the process?
Thanks for all guidance.. Great site by the way.
usall5 - ripping out the the hair I have left..
xda2 on T-mobile via Virgin
ROM: 2.06.00WWE
ROM Date: 06/14/04
Radioversion 1.14.00
Protocol: 1337.24
ExtROM: 2.06.100a
No replies, so I moved on myself -
Info' for all out there, as it may help someone, below.
I found that if I did a complete redo that the Activesync did not go off. But phone problem persisted. Search all over again and found an incling that BTHTools1100 may be the culprit/adding to..
I have uninstalled BTHTools and soft reset and the phone works much better now... Apparently the Bluetooth had to come on before the call could be answered....
I had this on before and did not notice any probs though, so ??
I now have to switch on bluetooth manually before using sat nav whereas before BTHTools did that automatically.
Anyone any ideas on how to set up so phone and sat nav work correctly? That is doesn;t come on for ohone but does for sat nav.
Ta
usall5
Hey everyone....for some strange reason, whenver i get a call or text message the ringer or notification stays on even when im the call. I noticed this in some of the later DCD 2.2.x roms. IS anyone else having this problem or know how to fix this...any help is greatly aprpeciated
me too
I noticed this as well just upgraded yesterday using the newest sprint, then puting in a cooked DCD...Thanks, I love it, but the notification(vibrate) stays on and I get no sound from the speaker (media player, ringer, etc)...still searching for a solution
Bratcop said:
I noticed this as well just upgraded yesterday using the newest sprint, then puting in a cooked DCD...Thanks, I love it, but the notification(vibrate) stays on and I get no sound from the speaker (media player, ringer, etc)...still searching for a solution
Click to expand...
Click to collapse
my problem is a little different, im getting too much sound....lol....when im on a call and i receive another call or text, i still hear the ringtone for that action and it usually repeats itself a couple times making it so that i cant hear the person im talking to on the phone. I think i read somewhere that what ur talking about maybe due to picking Lockstream DRM as an option in the kitchen....did u do that?
not I
I didn't cook it myself, downloaded it complete. I added the registry entries I found on this board and I am closer. I still don't get a ring, bur media player now plays and the phone always vibrates when a call. It just seems a little fishy on the ringer end of things...
did you guys that cooked the rom all include the Lockstream DRM package when you built?
if so, I have some problem with the package, and leaving it out of your ROM might resolve your problem for now.
let me know.
DCD, thanks for the help with the ROM and the Kitchen! I haven't cooked up anything yet but I am sure I will give it a try.
Could this be the cause of the problems I am having...I loaded Olipro 2.40, then applied the latest Sprint ROM to my Alltel phone. This gave me the newest radio 3.35.04. I then loaded your final version 2.3.2. I have the ringer issue detailed above, as well as no camera function...I am considering reloading your 2.3.2, then going with the radio 3.27. Also, what's the deal with the PRL file, do I need to change mine from 30029 to something else?
Thanks again man...if you aren't already, you are gonna be a wealthy man some day...
dcd1182 said:
did you guys that cooked the rom all include the Lockstream DRM package when you built?
if so, I have some problem with the package, and leaving it out of your ROM might resolve your problem for now.
let me know.
Click to expand...
Click to collapse
DCD, i didnt use the Lockstream DRM package. Im not sure when i noticed this....i know its happening now and when i was using that later of ur 2.2.X series....maybe its something that happens normally and im just now noticing it, but i dont remember if even the stock roms did this....am i supposed to her the ringtone and notifications when im on the phone? is that common?
PS...thanks for ur hard work on this stuff, ur roms are great
sorry
sorry to get this thread careening off course
I found more info on the dropped speaker on this thread...
http://forum.xda-developers.com/showthread.php?t=376012&page=15
Thanks again.
Anyone else having a wierd loud noise when a call waiting comes in? I fisrt got this after flashing radion 3.42.30 and dcd 3.2.2
I flashed to dcd 3.23, and it was still there.
I re-flashed the radio, and its still there.
jtg
(33)
yeah, I recently noticed it as well. It sounds like an alarm of some sort. Very annoying
omg yes it happened to me last night. That is horrible. Anyone have any idea what that could be? I am running DCD3.2.3 with 3.42.30 radio
I had that exact thing happen with the 3.42.02 radio from the official sprint rom. I recently switched to 3.42.30 and I've yet to experience it again. Infact I just tested it before I made this post. I know thats not much help since you all have the .30 radio, but just wanted to pass along my experience. I guess the only other thing I have done differently is before I updated the radio to .30 I switched from SPL 2.40 to 2.47.
Perhaps try doing a fresh install of the radio and then the rom+cab?
JerrytheGreat said:
Anyone else having a wierd loud noise when a call waiting comes in? I fisrt got this after flashing radion 3.42.30 and dcd 3.2.2
I flashed to dcd 3.23, and it was still there.
I re-flashed the radio, and its still there.
jtg
(33)
Click to expand...
Click to collapse
i heard it was a diamond call waiting sound if so i hate it
Hmmm...I guess I should go look for a new radio and see if it changes.
Any of the heavy hitters want to chime in?
dcd? gc14?
rickyrecaro said:
i heard it was a diamond call waiting sound if so i hate it
Click to expand...
Click to collapse
No way....It is a ear screeching sound that stops you mid sentence while talking. I was like "Holy S***t, One second please my phone is acting up" to a customer I was talking with.
i just get this weird little noise in the beginning of a outgoing call, and for some reason the phone app itself pops up after i close a window to an app.
i get that alarm sound too. its kinda random. sometimes on BT it sounds fine. but its not the radio its the rom i think. i never had the issue when i was on 3.0.4 and 3.42.30
DCD bug?
kflipproductions said:
i get that alarm sound too. its kinda random. sometimes on BT it sounds fine. but its not the radio its the rom i think. i never had the issue when i was on 3.0.4 and 3.42.30
Click to expand...
Click to collapse
DCD-u reading this? Do you think we've got a bug? I'm on alltel--others--is it carrier specific?
What dialer are you using?
the vogue dialer-dcd's default
I'm using dcd's kitchen, no OEMs added, just enterprise, entertainment, vc, and everything else as defaults.
I'm on alltel, I do use activesync with exchange, spb pocketplus, google maps, livesearch, htc gps viewer, and wififofun2.
jtg
gc14 said:
What dialer are you using?
Click to expand...
Click to collapse
Diamondish Black Titan Dialskin v.2.23
kflipproductions said:
Diamondish Black Titan Dialskin v.2.23
Click to expand...
Click to collapse
It's not the custom dialer that is doing this, because the custom dialer is just a skin (images) .
It's the Vouge Dialer found in the kitchen.
I cooked the Vouge dialer and got that annoying sound when ever I have call waiting.
I did not use the kitchen just the dcd rom 3.2.3 and radio 3.42.30...It is really getting annoying now.. anyone have any ideas?
I have the call waiting problem too. I first hear the regular call waiting sound followed by about five loud beeps that sound like someone keeps pressing a button on the other end.
It's not the custom dialer that is doing this, because the custom dialer is just a skin (images) .
Click to expand...
Click to collapse
Not every custom dialer is just a skin with images.
My thoughts
If you happen to own an old phone with caller ID that doesn't support call waiting/caller id, then you will hear a very similar sound. I believe that loud noise is actually the caller ID info being sent, on a standard pots phone it's only sent once, but it's possible that cells send multiple bursts in case the phone misses one of them.
Then again, I, who know nothing, is just giving my 2 cents on this.
BTC
gc14 said:
Not every custom dialer is just a skin with images.
Click to expand...
Click to collapse
True. But I was referring to the custom dialer he is using. Because I helped create it.
Default Prophet ringing tone goes silent after certain numbers of dialing
I wonder if anyone notice the problem exist eversince WM6 ROM. I have tried many version of WM6, WM6.1 and now WM6.5, they are all having the same problem
After making certain calls using the keypad, the ringing tone disappear (incoming call ringing tone and the keypad tone all disappear)
Second incident is that when I'm on the call and caller waiting is activated (second person trying to call me) the phone will also go total silent from there on.
The solution is to turn off the phone and restart.
After the phone restart, the ringing tone & dialer keytone work fine. After few dialings the fault happen again.
Does anyone has the solution?
Cheers
smarvest said:
Default Prophet ringing tone goes silent after certain numbers of dialing
I wonder if anyone notice the problem exist eversince WM6 ROM. I have tried many version of WM6, WM6.1 and now WM6.5, they are all having the same problem
After making certain calls using the keypad, the ringing tone disappear (incoming call ringing tone and the keypad tone all disappear)
Second incident is that when I'm on the call and caller waiting is activated (second person trying to call me) the phone will also go total silent from there on.
The solution is to turn off the phone and restart.
After the phone restart, the ringing tone & dialer keytone work fine. After few dialings the fault happen again.
Does anyone has the solution?
Cheers
Click to expand...
Click to collapse
What Rom are you using ?
Have you installed a dialler cab file yourself ?
or any other cabs to do with tones ie.. reminders or different tones for different callers ?
This seems like a problem specific to yourself as no one else has complained of this problem ,So i am thinking it's something you install your self that would also explain why you have the problem on several roms
wapvirus said:
What Rom are you using ?
Have you installed a dialler cab file yourself ?
or any other cabs to do with tones ie.. reminders or different tones for different callers ?
This seems like a problem specific to yourself as no one else has complained of this problem ,So i am thinking it's something you install your self that would also explain why you have the problem on several roms
Click to expand...
Click to collapse
i have same problem with my i mate jamin , only offical rom works fine, when i upgraded to cooked wm6.1 also wm6.5 i am facing same problem , nothing extra installed on that , if i put phone for long standby fone becomes silent , what is soul plz,
changed all radio versions also but same
thanks in advance
Nothing extra added to all the WM6.x ROM that I have tried but yet the problem remains.
Perhaps you didn't dial as much number as I do, that's why you haven't experienced that.
In fact there were other threads discussing the same problem but no ones seems to have the right answer.
Im having same problem too, totally silent. It happen when use keypad to find/dail contacts, few click heard sound, then totally silent. I tried install/remove dailpad but the problem still exists, tried off keypad sound, changing ROM yet the problem remains.
I did install a ROM (Dont remember which one and when) and the problem happens everyday until I need to change to other ROM.
Maybe someone could come out with solution.... Anyone?
How can someone come out with a solution when you all discribe your problem so badly none of you can tell wich rom you are using build blah blah
wapvirus said:
How can someone come out with a solution when you all discribe your problem so badly none of you can tell wich rom you are using build blah blah
Click to expand...
Click to collapse
Perhaps you might not read the post carefully, we are saying of all the WM6.0, WM6.1 & WM6.5 ROM that we have tried have similar problem.
If you haven't experienced them, perhaps the best way to learn is to install the latest build -WM6.5 Build 23001 - 23016 WWE bikertibi edition at http://forum.xda-developers.com/showthread.php?t=532122
Then post us the solution if you have got one, thank you.
Cheers
smarvest said:
Perhaps you might not read the post carefully, we are saying of all the WM6.0, WM6.1 & WM6.5 ROM that we have tried have similar problem.
If you haven't experienced them, perhaps the best way to learn is to install the latest build -WM6.5 Build 23001 - 23016 WWE bikertibi edition at http://forum.xda-developers.com/showthread.php?t=532122
Then post us the solution if you have got one, thank you.
Cheers
Click to expand...
Click to collapse
Yes i have read but this problem only exists in the latest builds of 6.5 and by the way i built some of those ROMs so your suggestion is out the window
I stopped building and releasing after 23004 because i was noticing to many bugs the only way to stop this with these latest builds is to change the way we cook the ROMs there is no fix. The files that are causing the problems are in the wrong partition so they can't be read when called on by the kernel of the OS (Like they don't exist)
This is why all the builds after 21100 have problems
You can Read all about it here:
http://forum.xda-developers.com/showthread.php?t=544445
As for all the ROMs having problems well i have run some of these 6.0 and 6.1 roms for months with no problems (and not just me many others on this forum)
These problems are 6.5 related
wapvirus said:
Yes i have read but this problem only exists in the latest builds of 6.5 and by the way i built some of those ROMs so your suggestion is out the window
I stopped building and releasing after 23004 because i was noticing to many bugs the only way to stop this with these latest builds is to change the way we cook the ROMs there is no fix. The files that are causing the problems are in the wrong partition so they can't be read when called on by the kernel of the OS (Like they don't exist)
This is why all the builds after 21100 have problems
You can Read all about it here:
http://forum.xda-developers.com/showthread.php?t=544445
As for all the ROMs having problems well i have run some of these 6.0 and 6.1 roms for months with no problems (and not just me many others on this forum)
These problems are 6.5 related
Click to expand...
Click to collapse
Great!
I wonder if you can suggest us a good WM6.1 version with link for Prophet G3 that doesn't have those bug to test and report to you.
Cheers
smarvest said:
Great!
I wonder if you can suggest us a good WM6.1 version with link for Prophet G3 that doesn't have those bug to test and report to you.
Cheers
Click to expand...
Click to collapse
Ermmm i don't want to be biased but what about my latest 6.1 this is a good stable ROM for you to try
http://forum.xda-developers.com/showthread.php?t=545229
Workaround
Hi all,
if you want to workaround the problem, just turn off the keypad sound.
Phone --> Menu --> options... --> Keypad: Off.
Nir
nir-k said:
Hi all,
if you want to workaround the problem, just turn off the keypad sound.
Phone --> Menu --> options... --> Keypad: Off.
Nir
Click to expand...
Click to collapse
Have you tried it? Does it work?
I don't quite like the idea because by enabling the keypad sound that's how I get to know whether the income call will ring or not. Because I have lost many incoming calls due to the bug, not knowing someone is calling.
Cheers
wapvirus said:
Ermmm i don't want to be biased but what about my latest 6.1 this is a good stable ROM for you to try
http://forum.xda-developers.com/showthread.php?t=545229
Click to expand...
Click to collapse
Is there any clean version available without Manila for maximum memory available?
smarvest said:
Is there any clean version available without Manila for maximum memory available?
Click to expand...
Click to collapse
look at dioxda2 roms he has some very good clean builds
smarvest said:
Default Prophet ringing tone goes silent after certain numbers of dialing
I wonder if anyone notice the problem exist eversince WM6 ROM. I have tried many version of WM6, WM6.1 and now WM6.5, they are all having the same problem
After making certain calls using the keypad, the ringing tone disappear (incoming call ringing tone and the keypad tone all disappear)
Second incident is that when I'm on the call and caller waiting is activated (second person trying to call me) the phone will also go total silent from there on.
The solution is to turn off the phone and restart.
After the phone restart, the ringing tone & dialer keytone work fine. After few dialings the fault happen again.
Does anyone has the solution?
Cheers
Click to expand...
Click to collapse
Might be helpful to know that IPL, SPL, model (G3 or G4) and GSM, you have installed.
Arimxda said:
Might be helpful to know that IPL, SPL, model (G3 or G4) and GSM, you have installed.
Click to expand...
Click to collapse
IPL -1.00
SPL -2.G3.4PDA
Model G3
GSM -02.47.21
OS 6.5.23016
Hope to hear from you soon
smarvest said:
IPL -1.00
SPL -2.G3.4PDA
Model G3
GSM -02.47.21
OS 6.5.23016
Hope to hear from you soon
Click to expand...
Click to collapse
I have this setup:
IPL -2.15.0001
SPL -2.G4.4PDA
Model G4
GSM -02.19.21 [Ideal performance of the battery (for my setup and
installed programs)]
OS 6.5.23017
Already I have commented that I do not have these problems.
Perhaps the problem is caused by your s200 model (G3). I am not an expert, but if a common problem exists: Something must exist commonly to all,,, I think,,,
Hope someone can help.
I recently started to re-use my HTC HD2 after almost a year of non-use.
It is a stock handset running WM6.5 on the O2 network in the UK.
As I hadn't used the handset in a year, I had factory re-set it so, once I inserted my SIM card, I had to run through the set-up process.
Once done, the handset was working fine.
After a few days, I decided to change the ringtone from the default O2 one, to another one.
However, since doing this, the handset never rings when I get an incoming call and only vibrates.
I have factory reset the handset several times but this makes no difference.
I have searched on the internet and found some details of people with similar issues, but the recommended fix of creating a 'volatile' directory is not working for me.
Does anyone have any experience of this issue and can advise how to resolve?
have not experienced the same but some thoughts below ...
Does the speaker work when playing audio file via music player or from file explorer.
If no sound from speaker try blowing into grill left of camera or taping that area while a file is playing.
If speaker plays sound try removing SD card & test, also check & try a few changes in, Settings>Sounds & Notifications>Notifications & see what results you get !
Final option could be HSPL4 & load HSPL2.08 & try a smooth running standard style custom ROM such as CleanEX RV Standard 1.02 as should be a far better WM experience than the O2 branded ROMs ...
Thanks for the reply Mr B.
I have only just got round to checking this post but, yesterday, for some un-known reason the phone is now ringing as normal.
Very bizarre!