Default AT&T / Cingular Settings - WM6 - HTC Startrek

Sorry if posted before, I was not able to find it; but here are settings I found to work well from the stock ROM.
I recently installed Pampooh's ROSE ROM from here:
http://forum.xda-developers.com/showthread.php?t=483950
When I used the Network Setup Wizard for AT&T the settings would not work for me to access the internet or use MMS messages.
So I took the latest stock ROM - Cingular 3100/3125 v4.1.502.5 - WM5 AKU v3.4.2 from here:
http://rapidshare.com/files/53993022...0_cws_ship.rar
Re-installed it and noted the settings that DID Work and loaded them on Pampooh's ROM above. The result - it works! verified on both my SIM and my wife's SIM card (wife doesn't have a data plan - but has MMS messaging
Pampooh's ROM by default does not setup any network settings, so here are the settings needed to be added:
Settings->Connections->GPRS
Create new:
MEdia Net GPRS
Connects to: The Internet
Access point: wap.cingular
Username: [email protected] (CASE SENSITIVE)
Password: CINGULAR1 (CASE SENSITIVE)
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: (leave blank)
Settings->Connections->Proxy
Create new:
Cingular WAP
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port) wireless.cingular.com:80
Type: HTTP
Username: (leave blank)
Password: (leave blank)
{Pampooh's ROM had this already - but posted for information}
Now go to Messaging highlight MMS, select menu->settings->Menu->MMSC Settings
Name: Cingular MMS
MMSC URL: http://mmsc.cingular.com
WAP gateway: wireless.cingular.com
Port: 80
Connect Via: The Internet
Max sending size: 300K
All other defaults remain.
Enjoy,
~J

Thank you SO much for this post! I can't tell you how many months I've searched for this info...

Related

[SOLVED] Vodafone NL issue after update [ROM][WM 6.5] "Official" v1.00

Concerning DUTCH Vodafone users
When flashing: [ROM][WM 6.5] "Official" v1.00 [XIP/SYS 21854] and you place the sim-card in your phone it will start the connection setup to select you country and operator and it will do some vodafone settings.
These settings DOES NOT work. You CANNOT browse after that using GPRS.
Here are the correct settings which did the job for me, plz correct me if somethings is not correct, i'd verified these settings myselves:
HSDPA Switch: Turn on HSDPA (not off)
GPRS authentication on PAP (not CHAP)
Goto START -> Settings -> 6. Connections -> 5. GPRS ->
delete all entries: and create 3 entrys:
-Vodafone MMS
Connect to: vodafone MMS
Access Point: office.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
-Vodafone Office
Connect to: The Internet
Access Point: office.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
-Vodafone Push Mail
Connect to: Vodafone Push Mail
Access Point: push.vodafone.nl
Username: vodafone
password: vodafone
pri/sec DNS: empty
Ip adress: empty
Goto START -> Settings -> 6. Connections -> 6. PROXY ->
delete all entries: and create 3 entrys:
-Vodafone Office HTTP
Connects from: Work
Connects to: The Internet
Proxy nameort: 192.168.251.150:8799
Type: HTTP
username/password: empty
-Vodafone Office Sock
Connects from: Work
Connects to: The Internet
Proxy nameort: 127.0.0.1:8799
Type: SOCKS4
username/password: empty
-Vodafone Office WAP
Connects from: Work
Connects to: The Internet
Proxy nameort: 192.168.251.150:9201
Type: WAP
username/password: empty
(PROXYS ARE PROBABLE NOT NECCESARY!)
Goto START -> Internet Explorer -> Menu - Tools - Options - Connections:
Automaticlly detect settings: OFF
Select network: The Internet
When using Push Mail configure it using activesync or in windows 7 or higher with: Windows Mobile Device Center.
I'm open for questions and answers.
Good luck and sorry for bad english
Wuwa

[Q] Default list of APNs for AT&T

I've installed GingerBlur 2 tonight and for some reason I couldn't connect to the internet. I found out that my list of APNs has been wiped out. Is there an xml file I can use to restore them via APN Manager or something similar?
Much appreciated.
I am also facing the same thing....please some one help us....
http://forum.xda-developers.com/showpost.php?p=13179480&postcount=4208
This thread got me partially back up and running. I plan to re flash the latest sbf and after that I'll do a backup using APN Manager and post the backup.
Dr.Jeckyl said:
http://forum.xda-developers.com/showpost.php?p=13179480&postcount=4208
This thread got me partially back up and running. I plan to re flash the latest sbf and after that I'll do a backup using APN Manager and post the backup.
Click to expand...
Click to collapse
Thanks a lot...i added new APN by following the settings mentioned over there....it worked for me and my internet is working.
For convenience i will mention the steps that i followed:
Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names.
Press ‘Menu’ and select ‘New APN’.
Enter these APN settings:
Name: AT&T
APN: wap.cingular
Proxy: <leave empty>
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: <leave empty>
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication Type: <leave empty>
APN Type: <leave empty>
More help:
http://forum.xda-developers.com/showthread.php?p=13273515#post13273515

HELP- i think i killed my data connection on a huawei m835...

the rundown...
flashed froyoman for the ideos onto the m835. booted fine but no web. used metroff for froyo, but no dice.
reflashed recovery but web was still gone
manually input apn's but wouldn't save settings. BUT as settings were input, web sig. started working until I tried to save when they erased.
these are the exact settings i need which came off my mom's m835 AND in the data/data/com.android.providers.telephony/databases/telephony.db/carriers folder
name:MetroPCS
APN: #777
proxy: proxy.metropcs.net
port: 3128
username: yourphonenumber at aaaj dot mymetropcs dot com
password: 699160
mmsc: h t t p : / mms dot metropcs dot net : 3128 slash mmsc
mcc: 311
mnc: 660
type: PAP or CHAP
apn type : *(astrix)
is it possible to push these in through adb and if so how?
I have access to another m835 that's not rooted, but i'll root it if i have to in order to gain access to all critical read only files...
oh and my build.prop says
"#begin volatile config
#end volatile config"
then switches between eclair and froyo after the #
that's not good is it? keep in mind that I'm nu to this and I'm going off a general hunch...

MMS problem X10 mini pro CM7Pro v21

i have a problem setting my mms settings
these are network settings
GPRS settings:
APN: internet
Username: telenor
Password: gprs
Proxy address: 217.065.192.033 (or 217.65.192.33)
Proxy port: 8080 (for older devices 9201)
MMS settings:
APN: mms
Username: (empty)
Password: (empty)
Proxy address: 217.065.192.033 (or 217.65.192.33)
Proxy port: 8080 (for older devices 9201)
MMS server address: mms.telenor.rs/servlets/mms
but if i create a separate points for interent and mms, i need to choose one of them and then just mms or jut interent can work, is there a way to make them both work at the same time
but i can not figure out how to put them in the same acces pint name
thanx inadvance
Yes, a had the same problem.
I tried several ROMs (CM7Pro v21, SonyStyle V10, ArcMini)
and it was the same for all of them.
Now I'm running StornMix V2 and MMS is working.
Unfortunately in StornMix V2 has 1 gap:
-> the Sym-Key on hardware keyboard doesn't work
but there is a fix for this... apply Optional_default_keyboard.zip via CWM
I also tried GingerDX 21b.
- MMS is also working here
- same problem with SYM-key... but OK after fix Optional_default_keyboard.zip
- could not overclock at all ?!

[Q] hcl me tablet u1 with huawei E173z-1 from etisalat egypt

hi,
i have hcl me tablet u1 running android 4.0.3 ics and tried to connect to internet through 3g dongle i used HUAWEI e173 from operator etisalat egypt
when i connect it to the tablet there is nothing changed with the signal indicator and tried to put settings to the apn like that :
HTML:
1. Open Menu  Settings  Wireless controls  Network
 Mobile Networks  Access Point Names
2. Press Menu  New APN
3. Fill your parameters as shown below:
Name: Etisalat
APN: etisalat
Proxy:
Port:
User Name:
Password:
Server:
MMSC: http://10.71.131.7:38090
MMS Proxy: 10.71.130.29
MMS Port: 8080
MCC:
MNC:
APN Type: Internet
4. Press Menu, and then Save
5. Press Tick, next to etisalat to make it active
6. Press Back to return to the "Mobile network settings" screen
7. Probably optional: Select "Use only 2G networks
that was givin in this topic and there is nothing happen
please show me ho to make it work
and forgive me for my english​
hi there
hi,
any help please??!!!!
i found these page " android pipip de/umts_howto php " ( change spaces with dots)
is this suitable for me or there is another good method . I'm new to the android world and don't no what to do
still no answer
any body plz

Categories

Resources