I've installed GingerBlur 2 tonight and for some reason I couldn't connect to the internet. I found out that my list of APNs has been wiped out. Is there an xml file I can use to restore them via APN Manager or something similar?
Much appreciated.
I am also facing the same thing....please some one help us....
http://forum.xda-developers.com/showpost.php?p=13179480&postcount=4208
This thread got me partially back up and running. I plan to re flash the latest sbf and after that I'll do a backup using APN Manager and post the backup.
Dr.Jeckyl said:
http://forum.xda-developers.com/showpost.php?p=13179480&postcount=4208
This thread got me partially back up and running. I plan to re flash the latest sbf and after that I'll do a backup using APN Manager and post the backup.
Click to expand...
Click to collapse
Thanks a lot...i added new APN by following the settings mentioned over there....it worked for me and my internet is working.
For convenience i will mention the steps that i followed:
Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names.
Press ‘Menu’ and select ‘New APN’.
Enter these APN settings:
Name: AT&T
APN: wap.cingular
Proxy: <leave empty>
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: <leave empty>
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC: 310
MNC: 410
Authentication Type: <leave empty>
APN Type: <leave empty>
More help:
http://forum.xda-developers.com/showthread.php?p=13273515#post13273515
Related
Sorry if posted before, I was not able to find it; but here are settings I found to work well from the stock ROM.
I recently installed Pampooh's ROSE ROM from here:
http://forum.xda-developers.com/showthread.php?t=483950
When I used the Network Setup Wizard for AT&T the settings would not work for me to access the internet or use MMS messages.
So I took the latest stock ROM - Cingular 3100/3125 v4.1.502.5 - WM5 AKU v3.4.2 from here:
http://rapidshare.com/files/53993022...0_cws_ship.rar
Re-installed it and noted the settings that DID Work and loaded them on Pampooh's ROM above. The result - it works! verified on both my SIM and my wife's SIM card (wife doesn't have a data plan - but has MMS messaging
Pampooh's ROM by default does not setup any network settings, so here are the settings needed to be added:
Settings->Connections->GPRS
Create new:
MEdia Net GPRS
Connects to: The Internet
Access point: wap.cingular
Username: [email protected] (CASE SENSITIVE)
Password: CINGULAR1 (CASE SENSITIVE)
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: (leave blank)
Settings->Connections->Proxy
Create new:
Cingular WAP
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port) wireless.cingular.com:80
Type: HTTP
Username: (leave blank)
Password: (leave blank)
{Pampooh's ROM had this already - but posted for information}
Now go to Messaging highlight MMS, select menu->settings->Menu->MMSC Settings
Name: Cingular MMS
MMSC URL: http://mmsc.cingular.com
WAP gateway: wireless.cingular.com
Port: 80
Connect Via: The Internet
Max sending size: 300K
All other defaults remain.
Enjoy,
~J
Thank you SO much for this post! I can't tell you how many months I've searched for this info...
Hi, I'm looking for the best windows software to install APK file into my Xperia X10 or to any android phone , and to be a win7 compatible .
thanks in advance
I like iAPK, which makes APK installing a drag-and-drop task.
http://forum.xda-developers.com/showthread.php?t=716806
machhho said:
Hi, I'm looking for the best windows software to install APK file into my Xperia X10 or to any android phone , and to be a win7 compatible .
thanks in advance
Click to expand...
Click to collapse
Try these guys there the shiznit all this stuff worked for me on my
x10a ATT USA Now 2.1.1updated
Benchmarks are 750ish per the Quadrant app
ATT and Rogers (Thank you again BluechipJ for the settings and Video)Settings are at the bottom of this post but it’s a good thing to check all your settings and write them down before you start.
Also at the bottom of the post are the apps that work for me I can get 36 to 48 hours of normal use checking mail,news weather and facebook. And about 24 hours of heavy web use downloads,videos and surfing and then some.
Also before “I” started I did a factory reset and went to SU updates and did a repair ( And did a reboot “restarted” )So I started with a fresh up to date phone. Then followed the guides To the letter.
These guys now what there doing I have had no problems at all with my phone signals and operations are even better now but you be the judge.
[FLASHTOOL GUIDE] HOW TO for n00bies
Thank you
rendeiro2005 Senior Member for the Guides,Tools and Roms.
http://forum.xda-developers.com/showthread.php?t=928343
I use 2.8 if you are a noobie like me it works.
( [UPDATE 22/03/2011] Flashtool BETA version 0.2.9.1 )
Thank you
Bin4ry Senior Member and Androxyde Senior Member for the Guides,Tools and Roms.
And watch the video ( http://www.youtube.com/watch?v=B9_pFOxPJUY )
Thank you BluechipJ for the video and Settings.
This video is old but the updated 2.8 flasher works fine you can root and all the stuff in it works fine. [UPDATE 22/03/2011] Flashtool BETA version 0.2.9.1.
Read the new forums for the new roms if you want something other then the 2.1.1updated
ALL WAYS RUN FLASHTOOL IN Administrator (right click app click run as Administrator) do not click open (on XP pro any way) but read the forums for your OS I’m sure it’s there. Be sure to check DATES and updates on forums
And this thread it has some good stuff.
http://forum.xda-developers.com/showthread.php?t=955703
Thank you DooMLoRD Senior Member For Guides,Tools and Roms.
ROOT FIRST check perm then Install xRecovery, then all rest. Read the forum on how to.
Also check ALL DATES on ALL Posts,roms an apps "software" you download. And use only Updated Stuff but be careful of Beta just check in the Forum for what works and what doesn’t also check back or better yet Subscribe to XDA and to THAT forum and Senior Member so you can keep up to date on your x10
Oh and the biggest thing to remember is to THANK ALL THESE GUYs. So cools have fun be patient and read all BEFORE you start.
DO NOT KILL APPs they will just restart again and kill battery power
If you want to stop an app use Titanium Backup freezer
Thank you again BluechipJ for the settings
USA AT&T APN (3G) Settings:
Name: AT&T
APN: wap.cingular
Proxy: [blank]
Port: [blank]
Username:[email protected] [case sensitive]
Password:CINGULAR1 [case sensitive]
Server: [blank]
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410 (note. this could also be 310, 41 or 15)
APN Type: [blank]
Rogers APN (3G) Settings:
APN Name: Rogers [doesn't matter]
APN: rogers-core-appl1.apn [a p p L ONE]
Proxy: Not Set Port: Not Set
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http ://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: Not Set
How toTurn off all Call Forwarding not ( voicemail or caller ID ) on ATT network. #002# in dial pad and press call. This works in USA and ?.
You have to do this every time you check call forwarding settings for it to work all the time because every time you check the button it resets back to default which is on.
X10 Test mode
From the unlock screen, do not unlock but press
1.6
Menu Back Back Menu
Back Menu Menu Back
2.1
Home Back Back Home
Back Home Home Back
Phone/battery/Usage info: *#*#4636#*#*
IMEI number: *#06#
Be careful with this one it may or may NOT work
Enter to phone menu without SimCard - after Wrong PIN: press NO:
* * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK:
Software version: *#8377466#
AGAIN BE CAREFUL WITH SOME CODES I'M NOT RESPONSIBLE IF YOU PUT IN THE WRONG CODES OR THEY DO NOT WORK ON YOUR PHONE
if this helps please click the thanks button
the rundown...
flashed froyoman for the ideos onto the m835. booted fine but no web. used metroff for froyo, but no dice.
reflashed recovery but web was still gone
manually input apn's but wouldn't save settings. BUT as settings were input, web sig. started working until I tried to save when they erased.
these are the exact settings i need which came off my mom's m835 AND in the data/data/com.android.providers.telephony/databases/telephony.db/carriers folder
name:MetroPCS
APN: #777
proxy: proxy.metropcs.net
port: 3128
username: yourphonenumber at aaaj dot mymetropcs dot com
password: 699160
mmsc: h t t p : / mms dot metropcs dot net : 3128 slash mmsc
mcc: 311
mnc: 660
type: PAP or CHAP
apn type : *(astrix)
is it possible to push these in through adb and if so how?
I have access to another m835 that's not rooted, but i'll root it if i have to in order to gain access to all critical read only files...
oh and my build.prop says
"#begin volatile config
#end volatile config"
then switches between eclair and froyo after the #
that's not good is it? keep in mind that I'm nu to this and I'm going off a general hunch...
i have a problem setting my mms settings
these are network settings
GPRS settings:
APN: internet
Username: telenor
Password: gprs
Proxy address: 217.065.192.033 (or 217.65.192.33)
Proxy port: 8080 (for older devices 9201)
MMS settings:
APN: mms
Username: (empty)
Password: (empty)
Proxy address: 217.065.192.033 (or 217.65.192.33)
Proxy port: 8080 (for older devices 9201)
MMS server address: mms.telenor.rs/servlets/mms
but if i create a separate points for interent and mms, i need to choose one of them and then just mms or jut interent can work, is there a way to make them both work at the same time
but i can not figure out how to put them in the same acces pint name
thanx inadvance
Yes, a had the same problem.
I tried several ROMs (CM7Pro v21, SonyStyle V10, ArcMini)
and it was the same for all of them.
Now I'm running StornMix V2 and MMS is working.
Unfortunately in StornMix V2 has 1 gap:
-> the Sym-Key on hardware keyboard doesn't work
but there is a fix for this... apply Optional_default_keyboard.zip via CWM
I also tried GingerDX 21b.
- MMS is also working here
- same problem with SYM-key... but OK after fix Optional_default_keyboard.zip
- could not overclock at all ?!
hi,
i have hcl me tablet u1 running android 4.0.3 ics and tried to connect to internet through 3g dongle i used HUAWEI e173 from operator etisalat egypt
when i connect it to the tablet there is nothing changed with the signal indicator and tried to put settings to the apn like that :
HTML:
1. Open Menu Settings Wireless controls Network
Mobile Networks Access Point Names
2. Press Menu New APN
3. Fill your parameters as shown below:
Name: Etisalat
APN: etisalat
Proxy:
Port:
User Name:
Password:
Server:
MMSC: http://10.71.131.7:38090
MMS Proxy: 10.71.130.29
MMS Port: 8080
MCC:
MNC:
APN Type: Internet
4. Press Menu, and then Save
5. Press Tick, next to etisalat to make it active
6. Press Back to return to the "Mobile network settings" screen
7. Probably optional: Select "Use only 2G networks
that was givin in this topic and there is nothing happen
please show me ho to make it work
and forgive me for my english
hi there
hi,
any help please??!!!!
i found these page " android pipip de/umts_howto php " ( change spaces with dots)
is this suitable for me or there is another good method . I'm new to the android world and don't no what to do
still no answer
any body plz