I heard its possible to flash the radio so it match the US and Canada frequencies to get 3G data instead of EDGE
Can someone Help me. I found a link to the Radio roms but no step by step flashing guide.
I have a european Hero Downgraded to version 2.73.405.5 on Baseband version 63.18.55.06EU_6.35.06.18.
How can I make it work on 3G cause right now I can only acces EDGE. With ROGERS Canada
Thanks to all of you guys (& girls) because this is new to me and seriously, some of you are really talented.
seriously dude, that has been asked several times, is not possible and belongs not in this category.
OK man sorry about that was not there for the past years reading all the threads ever created... I did some search and wasnt able to find specific guide about that...
Forget about it and have a nice day.
i recently read that it is possible on some winmo phones to use the radio matching your network on a different phone. comes with the downside that reception goes down to (i would think) unusable level, because the hardware is not meant to work on these frequencies. it is more of a "side effect" that it works at all. i have not read of something like this happening at all for a hero.
Related
Hi all,
i'm searching for the best (well, at the moment) radio to use in italy.
Usually i use 3 as operator and umts is the only choice.
Does anybody of you already tested out some rom which thinks it's better than others?
I tried the latest 1.5x but they seem to be not so stable.
Sometimes my hermes ask me for the pin as it lost the signal.
Some others it freezes.
Any suggestion?
Thanks in advance.
Acr
I could have sworn 3 used GSM and 3G networks, otherwise they would have very little coverage. Anyone else like to comment?
As for the Radio's, unless you find someone on the same network, with the same phone in the same area you wont know without trying them. Personally my first upgrade was to 1.50.00 then I moved to 1.54.07 which I am finding to be very good.
Hey people,
I always had an HTC with windows mobile.. i always had non-provider limited/customized devices.
Always had problems with the normal radio's that i didnt get much signal, always under the 3bars.
So i always looked on this forum what should be the best radiorom for the device to get better signal.
Now i have an HTC Hero with android, never flashed, never done anything with android eighter.
Its now 8 days ago that i bought myself this hero and always am under the 3 bars signal. some times i dont even get signal.......
Is here someone with the same problem?
I have Vodafone NL, they always change the radio-rom to the best fit when the phone is branded, but the hero doesnt even have an branded vodafone NL Hero!
So please help me with chosing the rom and point me to the best direction of an how to flash radio rom
I've looked around and didnt realy get an answer on this, so thats why im asking.
Thanks in Advance!
Read this post first:
http://forum.xda-developers.com/showthread.php?t=563757
I'm not using the same provider as you. But I find:
63.18.55.06_6.35.05.31 saved a lot of battery compared with others
63.18.55.06IU_6.35.08.22 seemed to have better signal
63.18.55.06JU_6.35.09.26 the lastest one, seemed kept a good balance between signal and battery.
NOTICE: Signal bars do not mean everything, with 63.18.55.06IU_6.35.08.22, if I've got only one bar, that means I can hardly make a call, but 63.18.55.06JU_6.35.09.26 will give me better performance even with only one bar.
That's all I've got. And am talking about gsm Network, not 3G.
Legend....
This topic is old... bu tmy post is a little off topic... so....
I have the same question regarding the legend.
I bought a stock standard HTC Legend, but Vodafone has bad reception, even no signal.
Tried 2 SIM cards from Vodafone, and one Telfort, the Telfort/KPN Sim card works fine.
So, i am also wondering if there is a special Radio ROM to use with the legend.
Hey there,
been having frequent signal cuts lately after flashing ATT radios on my international Atrix.
However, I did not find any hint about which radios can be used on international phones and which should not.
So, what radio should one use with an international Atrix?
http://forum.xda-developers.com/showthread.php?t=1163009
look here
or google search
xda fruitcake for international atrix
ltdanno360 said:
http://forum.xda-developers.com/showthread.php?t=1163009
look here
or google search
xda fruitcake for international atrix
Click to expand...
Click to collapse
Yeees...actually I did look there, but there is no information given about international devices. Each time someone brings a question regarding international phones, the discussion seems to overhear it.
There is just ATT (USA) and Bell (Canada) radios. It might be true, there exists an older Orange (UK) radio in the unlock thread. However, I started to wonder why there is no update on any other radio but overseas.
You know, either ATT/Bell really suck, making frequent radio updates neccessary, or Orange/O2/*insert any european carreer here* are plain lazy.
Edit: Ahh, right, the signal loss. Yes, I lost my mobile signal several times on Gingermod#4. Well, but everyone there insists on the signal loss being my fault for whatever I dont know reason at all.
Razorless said:
Yeees...actually I did look there, but there is no information given about international devices. Each time someone brings a question regarding international phones, the discussion seems to overhear it.
There is just ATT (USA) and Bell (Canada) radios. It might be true, there exists an older Orange (UK) radio in the unlock thread. However, I started to wonder why there is no update on any other radio but overseas.
You know, either ATT/Bell really suck, making frequent radio updates neccessary, or Orange/O2/*insert any european carreer here* are plain lazy.
Edit: Ahh, right, the signal loss. Yes, I lost my mobile signal several times on Gingermod#4. Well, but everyone there insists on the signal loss being my fault for whatever I dont know reason at all.
Click to expand...
Click to collapse
which specifc international device are ya referring to sir? french german china
zimbobway(if they even had atrix there)
http://forum.xda-developers.com/showthread.php?t=1222757
check this out!
ltdanno360 said:
which specifc international device are ya referring to sir? french german china
zimbobway(if they even had atrix there)
http://forum.xda-developers.com/showthread.php?t=1222757
check this out!
Click to expand...
Click to collapse
Ah, thanks, it is a german atrix btw.
I restored my darkside prefinal backup with faux kernel + ATT .30p radio and everything works fine.
The signal cut issue might be related to using ATT radios and international stock kernels which I used in gingermod#4.
Will test and report
Edit:
Seems like the issue was not kernel related from the start. Freezing "data manger service" and "home"-launcher is not save on every ROM.
Hey guys, I'm a noob, please don't hurt me
I'm an American living in Japan and I just bought my first smart phone...the EVO 3D (3G) for AU by KDDI...I'd post a link, but I'm not yet allowed.
Their non-3G network was CDMA...so I assume that their 3G is also CDMA....can anyone confirm that?
Under that assumption (CDMA), we're still waiting for ICS, so I'm wondering what you'd all recommend I upgrade my phone to while I wait. I'm not a fan of the stock Android 2.3 that came on the phone, and I'd really like ICS....but if there is something I could use now, that might be fine with me.
Also, what are the basic steps I need to follow, I found the sticky thread in the dev forum, but I'm not sure what stickies would apply to my situation. I'm guessing I'd have to start with a root kit, and go from there....but please fill in the gaps, thanks
miahallen said:
Hey guys, I'm a noob, please don't hurt me
Click to expand...
Click to collapse
Is there evidence to confirm that ''noobs'' have been mentally assaulted for asking questions on this forum?
Just being playful after watching the required "noob" registration video
Lol I see.
Chances are that you will not be able to activate any CMDA phone from overseas on a network here in the USA. The big networks like verizon and sprint will not allow foreign IMEI numbers to be submitted to their system for activation.
Do you happen to know what frequency the cdma network you came from runs on? Look behind the battery
miahallen said:
Hey guys, I'm a noob, please don't hurt me
I'm an American living in Japan and I just bought my first smart phone...the EVO 3D (3G) for AU by KDDI...I'd post a link, but I'm not yet allowed.
Their non-3G network was CDMA...so I assume that their 3G is also CDMA....can anyone confirm that?
Under that assumption (CDMA), we're still waiting for ICS, so I'm wondering what you'd all recommend I upgrade my phone to while I wait. I'm not a fan of the stock Android 2.3 that came on the phone, and I'd really like ICS....but if there is something I could use now, that might be fine with me.
Also, what are the basic steps I need to follow, I found the sticky thread in the dev forum, but I'm not sure what stickies would apply to my situation. I'm guessing I'd have to start with a root kit, and go from there....but please fill in the gaps, thanks
Click to expand...
Click to collapse
When I had AU by KDDI when I was living in Japan is was CDMA. As far as I am aware the Japanese version wasn't able to be rooted using the CDMA methods here in the development forum. Also the ROMs here would not work on your device and would actually need to be slightly modified to include files from your device to work, but you don't have an ICS ROM to use for replacing files.
私のEVO 3Dから送信される。
heathmcabee said:
Chances are that you will not be able to activate any CMDA phone from overseas on a network here in the USA. The big networks like verizon and sprint will not allow foreign IMEI numbers to be submitted to their system for activation.
Do you happen to know what frequency the cdma network you came from runs on? Look behind the battery
Click to expand...
Click to collapse
I don't need to use it in the states...I live in Japan
dastin1015 said:
When I had AU by KDDI when I was living in Japan is was CDMA. As far as I am aware the Japanese version wasn't able to be rooted using the CDMA methods here in the development forum. Also the ROMs here would not work on your device and would actually need to be slightly modified to include files from your device to work, but you don't have an ICS ROM to use for replacing files.
私のEVO 3Dから送信される。
Click to expand...
Click to collapse
Thanks Dastin, I guess I'll have to wait for something official
miahallen said:
I don't need to use it in the states...I live in Japan
Thanks Dastin, I guess I'll have to wait for something official
Click to expand...
Click to collapse
That's kind of the conclusion I came to, after running through all the different root/unlock methods, I came across issues in every single one, and my skill / confidence isn't high enough to really make a go at figuring it out.
Only thing I haven't really attempted is downgrading from hboot 1.5 to 1.4, partially because my software version is different from the instructions, and soft bricking the phone makes me nervous considering the potential incompatibilities.
I think our phone is more or less the same as the sprint phone, just on the Japanese frequency. I'm hoping that the sprint announcement means we will also be getting ICS soon... but who knows
Hey guys,
I have a pretty unique problem and im not sure there even is a solution, but here goes.
The story is that I had been living in Canada for the last 7 months or so and bought myself a shiny new Desire 601 from Virgin Mobile (its a zara_ul). Since then, I have managed to brick it hardcore style, but i was able to ressurect it after 4 months of fruitless attempts through various odd files, sheer dumb luck, and the RUU from mrplowdans google drive (super props by the way, you saved my phone good sir!). I had to SuperCID the phone in order for the RUU to stick.
So it goes without saying that im now running the Telus version of KK (i updated through the usual OTA once i had returned it to stock 4.2.2) on a VM phone. All good, no issues there. Ive since returned home to Australia, unlocked the phone so it works with an Australian carrier, also all good. Im able to make calls and send texts no issue.
My problem is with mobile data. It seems to be having an issue connecting to my carriers 3g/4g. Initially, there was nothing at all, just the bars in the notification bar telling me that i had a good connection to cellular. No little superscript 3G though, and in settings, although mobile data is 'On', it is showing connection failed. Adding a custom APN appeared to work slightly, the 3G appeared in the notification bar and in settings, mobile data was shown to be 'connected', but still no dice when i try to connect to the web or download an app.
Now i vaguely understand the principles involved here, I get that North american carriers use a different radio frequency to, say, Europe, and that differs again to Australia. My question is, is it on the software side? Would it be possible to find an Australian Radio.img for a desire 601 (i dont even know if they sell them here), flash it, and all will be fine and dandy? Or is it the physical antenna inside the phone that is set to receive only a certain frequency? Im not expecting someone to go and find me a working file or anything, i know most of you live in Canada anyway, but im looking for someone with a greater knowledge of these things to find a theoretical fix.
I know I rant a lot, but in the scheme of things im willing to let this problem slide considering i only just un-bricked it a few days ago AND managed to root 4.4.2 (a significant achievement given my non-existent knowledge of android), but it is a nuicance and if theres something simple i can do of course i will.
Thanks in advance for any help <3
EDIT: Ive since done some googling and discovered that they do sell these phones in Australia, and that the Network specs for it and the canadian model that i have are almost identical, many of the frequencies are the same on both. Leads me to assume that its software sided, the telus radio.img is telling the phone to not see non-canadian frequencies.