Hey guys, I just followed to flashing guide for my touch pro, and installed EnergyROM on to it. The HSPL and flash and everything seemed to go fine, but now im on
http://forum.xda-developers.com/showthread.php?t=508084
Step 3
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
My phone has been sitting at "PLease wait, phone starting up" for like 8 minutes.
This doesn't seem normal. . .should i be concerned?
Is your TouchPro CDMA or GSM? Sounds like you got the ROM to boot. Might just be taking a while. If it takes longer than 15 minutes, then reset the bugger. If something is indeed hosed with the ROM and it won't boot, just hold Volume Down and Power while hitting the reset button on the bottom, and you'll be back at the bootloader.
Cyfun said:
Is your TouchPro CDMA or GSM? Sounds like you got the ROM to boot. Might just be taking a while. If it takes longer than 15 minutes, then reset the bugger. If something is indeed hosed with the ROM and it won't boot, just hold Volume Down and Power while hitting the reset button on the bottom, and you'll be back at the bootloader.
Click to expand...
Click to collapse
It's verizon, so i assume it would be CDMA.
Alright, ill wait it out and give the reset a try if nothing happens. thanks
Curiously, if i end up being back at the bootloader, where should i procede?
actually i did the same installed a new rom and now it is stuck in start up , where it shows (touch Pro) stays lite for about a min or so then the whole phone reset. it seem to take the whole rom , because it said congrads installation is complete. now i cant do anything , like even install a different rom. i am wondering if i need to install a rom now via mini sd , or is there a master reset? and how am i going to install rom via mini sd
yellowz24 said:
actually i did the same installed a new rom and now it is stuck in start up , where it shows (touch Pro) stays lite for about a min or so then the whole phone reset. it seem to take the whole rom , because it said congrads installation is complete. now i cant do anything , like even install a different rom. i am wondering if i need to install a rom now via mini sd , or is there a master reset? and how am i going to install rom via mini sd
Click to expand...
Click to collapse
Like Cyfun said, hold Vol-Down/Power and Soft reset into bootloader. Plug the phone into USB and at the bottom serial should change to USB. Then flash away.
Otherwise, take a SD-micro and put your .nbh in the root folder, and rename it to RAPHIMG.nbh and reset into bootloader
holy crap that was fast, thanks , i am going to try it now
actually that worked, awesome!!!! i use to have a rom that was mighty rom (reborn) does anyone have the link for it , it seem to work the best on my phone!!
Sorry, never been a big fan of Mighty ROM. If you want something really Fast and Stable, I suggest Calkulins ROMs. Here is a link to the most recent release.
http://www.mediafire.com/file/tzmgjytkzm3/Calkulin's Touch Pro 23506 ROM v4.2.7z
I personally use NRG roms (due to them being updated so frequently). These however tend to be slightly buggy, and need many mods to suite individual needs.
Well once in bootloader mode i was able to get NFSFAN's rom installed with absolutely no issues.
So what did I do? Redownload a different version of energy rom and try it again. No luck there, the same thing happened. I think maybe energy rom just hates my phone. So I reflashed with NFSFAN's rom and i might just leave it with this. I dunno how much of a difference a noob flasher like myself will see between the two.
xmilkmanx said:
Well once in bootloader mode i was able to get NFSFAN's rom installed with absolutely no issues.
So what did I do? Redownload a different version of energy rom and try it again. No luck there, the same thing happened. I think maybe energy rom just hates my phone. So I reflashed with NFSFAN's rom and i might just leave it with this. I dunno how much of a difference a noob flasher like myself will see between the two.
Click to expand...
Click to collapse
EnergyROM has problems with Verizon phones.
SiqMawsh said:
EnergyROM has problems with Verizon phones.
Click to expand...
Click to collapse
wow that would have been good for NRG to mention in one of his posts... jeez.
antjc80 said:
Like Cyfun said, hold Vol-Down/Power and Soft reset into bootloader. Plug the phone into USB and at the bottom serial should change to USB. Then flash away.
Otherwise, take a SD-micro and put your .nbh in the root folder, and rename it to RAPHIMG.nbh and reset into bootloader
Click to expand...
Click to collapse
this post saved my butt guys. was having the exact same problem but didn't know how to reset to bootloader, thought my phone was bricked...
Ive never been able to get Energy to boot up on my Sprint TP. Tried flash dancing, etc, gets stuck on touch pro screen. Ended up using another ROM. Anecdotal of course
Me too...
That same thing happened to me, I've tried a few other energy ROMs but they've all been too buggy for me. I think he ported his GSM ROM over to CDMA because when I tried sending a text it asked for a SIM card.
I like psyki and I'm running Twisted NewSense right now...there are more CDMA ROM's over at ppcgeeks dot com
Maestro Nobones said:
wow that would have been good for NRG to mention in one of his posts... jeez.
Click to expand...
Click to collapse
why? the verizon touch pro is seriously gimped..MOST roms will barely run on them. the guys cook the roms according to how they like them, and likely theyre not on verizon if its not working. just flash a bunch of different roms till you find one that works, and i also have read that most verion touch pros seem to run better with pagepool at 6 so i suggest you try that..good luck with it, but remember that the guys that cook these dont owe any explanation if the dont want to. were getting state of the art roms (built for new phones) on our out-of-date touch pros for free.
Related
no my phone wont reboot at atll it turns on goes to a screen that says htc smart mobilty test only not for sale and in red below that it says no radio and doesnt go any further!!!!
please help me like seriously its not even my phone i need to straighten it out for him asap!!!!! i will even pay if some one can help me
press the power + camera + reset, load in the rom and radio, no need to pay, we're here to help! What is ur bootloader anyway ? is it unlock, stock rom ???
is that it because its not working is there any other method of hard reset?
i tried the buttons its not getting to the boot loader like at all , its unlocked using the titan unlocker and its just not booting up to any thing just that screen and the rom was 2.17 orignally then i flashed it to dcd's newest rom 2.2.1... then i steped it down to dcd 2.20 then i tried to flash the sprint 3.16 recent rom update and it got stuck at boot loader which was the oli bootloader which i think its called and i had to use exit_hbl and now its stuck. it will reboot but i still get that screen i mentioned before
i got to boot loader its says
TITA100
SPL-1.20.olipro
no wonder, you didn't follow instruction carefully, when you press power + camera and press reset , it should take you to tricolor, at that you can reload your sprint stock rom. Your phone is not brick yet
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
thanks but if anyone its astrqnusx hed get money first i flashed the rom again it worked and then i tried to flash the radio and it just restarts and doesnt load at all??? its stuck at the mobilty screen???
what radio and rom did you use? I assume that you have Titan(Mogul) not touch
and after the radio i tried to reload the rom and it acted as tho it would work and is now stuck at the mobilty and i used now dcds 1.6.8 rom and the 3.27 radio... and now its really stuck maybe i should try the stock rom for sprint?
you are too rush on thing, you can't use rom 1.6.8 with the new radio, reflash back with stock rom from your vendor to get working condition. There is specific instruction if you want to load the radio
After you get back to your vendor (sprint/verizon) follow this instruction to flash new rom, don't miss a step http://forum.ppcgeeks.com/showthread.php?t=17667. Again, I see you have the touch, touch and mogul are two different device you can't use DCD or any rom here. You have Titan Phone right?
-my touch is fine thats a custom flashed rom from swiftblade and it works amazing with a radio update ive done alot of different things even reg edits
but the titan is just new to me
Is your phone working yet?
yea i got it thanks!
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
j3oomerang said:
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
Click to expand...
Click to collapse
You must be a sad little man.
nismofun said:
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
Click to expand...
Click to collapse
I had the same problem flashing my mogal, it's not difficult to fix. take a deep breath, it will take a little bit of work but you can do it. flash back to rom 2.17 relock, then flash sprint official rom 3.35. Then run hard spl 2.40 then flash new rom, take battery out, hard reset should fix your problem. the relocker,unlocker and everything else can be found by searching xda and ppcgeeks.com
I had the same issue, resolved:
http://forum.xda-developers.com/showthread.php?t=384298
Cheers,
Tom
so i have root, i think. (how do you know?)
and installed the recovery img (also how do you know/confirm?)
i know im supposed to install another rom, but it works now??
it says i have 2.1 and everything?? do i need to run another rom???
and if i do need to install a rom, which one is best/most stable (opinions)
thank you
to check if you have recovery power the phone off and when you restart hold the VOL UP button and then turn it on..... it should boot up into a black screen with green writing with a list of options (i.e. backup/restore, flash zip file)
as for best rom to flash ....a few options out there depends on what you like..... but if you want a basic very stable 2.1 use Ivans 0.7 official (IMO) ..... but there are some good options out there if you don't want the basic 2.1
just look around
http://forum.xda-developers.com/showthread.php?t=652044
rvpartsguy huh?
where i work we sell rv parts too, mostly replacement stuff
anyway, ill restart and try booting that way and see.
that will confirm i have root too?
majorahole said:
rvpartsguy huh?
where i work we sell rv parts too, mostly replacement stuff
anyway, ill restart and try booting that way and see.
that will confirm i have root too?
Click to expand...
Click to collapse
Well you could not have flashed the custom recovery image without root, so yes.
ok, thats kinda what i thought, but wasnt sure
so, do i still have to flash to a different rom?
also, ive noticed stuff missing from the marketplace that i had before? sup wit dat?
thanks
You don't have too. However I would. The custom roms are more stabe and have more features that the original root rom. I like this one right now. Did you reboot and test that you have the recovery image?
majorahole said:
also, ive noticed stuff missing from the marketplace that i had before? sup wit dat?
thanks
Click to expand...
Click to collapse
Programs that weren't developed for 2.1 and only from 1.5 up to 2.0.1 possibly won't show up.
I had Magloader and WP7 in it. As time went by I upgraded to HD7 and never looked back. It's been a while since I have touched XDA and WM6.5.
My assumption is that even with Magloader, you only have to flash your stock ROM and it'll revert back to WM.
Mine won't go on and I suspect that I flashed a Non-Tmobile compatible ROM. Can someone confirm that this is the case? Here's the ROM string: RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship.exe
I understand completely that if I messed it up then it's messed up. I just wanna make sure there might be other solutions or something I am missing out.
-Thanks in advance!
----------------------------------
Is this a final answer? I need to know if it's bricked and nothing else can be done.
Anyone thinks a shop may be able to recover it back? It won't go on at all..
tictac0566 said:
Sometimes, it´s easier than you think.
You´ve got 2 options to get rid of HSPL. One of those options would be simply described in the original thread of HSPL.exe software. If you would have checked this program a little bit, you would have noticed the very fact that you can select what SPL or HSPL you want to install.
Second, you can flash your stock ROM via SD card method, this will replace HSLP and everything else - this does not work using RUU.exe via USB.
Click to expand...
Click to collapse
By the looks of the radio installed (2.04.50_22_2), I would say that you did brick your T-mobile phone. Take a look at the following thread for a possible solution to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=668347
Hi thanks for the response Lavell. Would MTTY be able to do anything?
The phone doesn't turn on at all, or it seems.
I've never bricked one before so Idk if this is the way it happens.
its gone. dead. it will need JTAGging or a new mainboard.
that thread wont help, the phone wont power on, and that thread requires you can get into bootloader.
that's a really early rom you used, the tmous didnt even exist when that rom shipped.
If you want to get rid of it let me know please!!!
Hey guys, don't mean to hijack the thread but I got the same problem here.
Had WP7 but could not use 2g so I went back to MAGLDR113 and installed the file below:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
It went all the way to 100% but now the phone is dead. Computer makes a sound when I plug in usb but I have tried changing batteries and all but it doesn't work.
Does anyone know in Dallas or areas around how to do that JTAG thing?
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
S2K_MoZo said:
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
Click to expand...
Click to collapse
At its most basic, its the same for ALL hd2's, ,
1 get the correct stock rom for your region&vendor
2 flash it
thats it.
Sadly lots of times this is shortened to
1 get stock rom
2 flash it
and people just assume they can use any stock rom, and since they usually already have HSPL installed, it allows the flash to start, and tmous phones die.
Yeh think the HSPL installer should of had a TMOUS version either blocking known bricking radio & ROMs or just an on screen message warrning & advising on checking before comencing with flash.
At end of the day it is the users fault for not researching or using a TMOUS rom to be 100% safer !
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo
If anyone has the time i would like some help on how to flash my Note without bricking the phone. Reason i ask, is because i have already bricked it!! Sent it off to mobiletechvideos.com who unbricked it so now i'm back! I love the phone alot just hate stock rom and how slow it is. I would like to use a rom that is able to overclock? I've read about the sauron rom but i can't tell if it's out dated or if there is something better now?
I'm not a noob when it comes to rom's, Htc aria, samsung captivate, inspire, then the htc one x - i've all rom'd them but now i'm stump'd. The first go around, i flashed the rom and everything went thru fine. When i booted up the phone - Nothing changed!? so i find another rom, flashed it and the phone bricked. Tried jig everything else and to no avail. So 65$ later i'm back with the stock rom and it's rooted. Anyhow, here is the info i'm sure you guys are wanting to give me a hand!
Model Number
SAMSUNG-SGH-I717
Andriod Version
2.3.6
Baseband Version
I717UCLF6
Kernel Version
2.6.35.11
Build Number
GINGERBREAD.UCLA1
Cliff Notes -- Hard bricked trying to flash rom, Main goal want to overclock, battery life not issue. Please help flashing :angel:
do you have a custom recovery ? like cwm or the other one ( ive only had my note a week)
i would start with that..
If I were you (and I fully understand that I am not nor anyone else on here...) I would:
1. Install Samsung Kies and drivers to my laptop.
2. Start Samsung Kies and plug in the phone via USB cable.
3. Update the phone's OS via Kies to ICS. You won't brick it that way.
4. Give stock ICS a chance and if you still feel it's too slow for you (rolling eyes), flash a custom ROM/kernel.
nutpants said:
do you have a custom recovery ? like cwm or the other one ( ive only had my note a week)
i would start with that..
Click to expand...
Click to collapse
Yep, already have clockwork mod, That's no big deal.
BlackZenith said:
If I were you (and I fully understand that I am not nor anyone else on here...) I would:
1. Install Samsung Kies and drivers to my laptop.
2. Start Samsung Kies and plug in the phone via USB cable.
3. Update the phone's OS via Kies to ICS. You won't brick it that way.
4. Give stock ICS a chance and if you still feel it's too slow for you (rolling eyes), flash a custom ROM/kernel.
Click to expand...
Click to collapse
Sounds good sir i will give it a try - Meanwhile Anyone want to take a stab at walking me thru a rom that would work on my phone?
not that i have any idea what i am doing...
0 MAKE VERY SURE THE ROM YOU ARE FLASHING IS FOR YOUR PHONE... FORGET THE WORDS "note" or "galaxy" or anything else..
its the i717d or i 7100 or i 7000 that matters.. if in doubt dont do it..
1 download your cwm compatible rom (like blackstar or others) ( try to pick a recent rom no older than 2 months unless all the developers have jumped ship for the new phone)
( usually ends with a .zip) to your sd card)
2 use "android file verifier " ( from the market) to make sure your md5 hash of the download is prefect
( there SHOULD be a md5 someplace to verify the file download)
then by following info like whats found here.... http://forum.xda-developers.com/showthread.php?t=1584250 ( and that i copied and pasted)
boot into recovery by pressing volume up down,and power button at same time ( when your phone is turned off)
Select wipe data/factory reset and confirm
Select wipe cache partition and confirm
Select advanced - wipe dalvik cache and confirm
Select install zip from SD card
Select from internal SD card or wherever you placed it.
Select the ROM file and confirm.
rom will install
then AGAIN
Select wipe data/factory reset and confirm
Select wipe cache partition and confirm
Select advanced - wipe dalvik cache and confirm
boot up wait 5mins for it to boot.. dont touch it for 10 minutes after it boots
then
have fun..
dont forget to wonder if you bricked it during the first boot... that one takes the longest..
i have followed these directions drunk and sober when flashing over 20 times my new note i717d i got last week and im not bricked yet.
its the same system i used with my sgs2 i9100 for over a year and it still works..
but then dont think anything i have said here is right.
i could just be stupid and very lucky that i dont brick everything i touch but will not admit it.
READ A LOT, then READ more.. then ONE MORE TIME READ.. then flash.
BlackZenith said:
If I were you (and I fully understand that I am not nor anyone else on here...) I would:
1. Install Samsung Kies and drivers to my laptop.
2. Start Samsung Kies and plug in the phone via USB cable.
3. Update the phone's OS via Kies to ICS. You won't brick it that way.
4. Give stock ICS a chance and if you still feel it's too slow for you (rolling eyes), flash a custom ROM/kernel.
Click to expand...
Click to collapse
So after about 2 hours off and on, using different cables and google. No avail, UGH!
Samsung kies
Your device is not supported to update via samsung kies. Walked thru a few xda threads and they are saying update thru odin. Hell if i'm jumping ship to odin again, mine as well do a rom. I'm giving this 1 more shot, if it bricks i'll sell it lol!!
Mobiletechvideos most have had to do something extreme to repair your device, or they gave you one that.... never mind. Well, looks like you need to flash CWM and find a zip aligned ROM on here.
BlackZenith said:
Mobiletechvideos most have had to do something extreme to repair your device, or they gave you one that.... never mind. Well, looks like you need to flash CWM and find a zip aligned ROM on here.
Click to expand...
Click to collapse
LOL, no they did exactly what was promised. Even people who haven't bricked their device have ran into this issue!
Okay - After reading up and then watching a video on how to flash roms. Which looked exactly like what i had done before time and time again. I'm proud to say i'm ROM'D! I'm now running the blackstar rom and it's very zippy love it to death. Would like to have tried ICS 4.0.4 but took the plunge and happy with the turn out.
I've always came to this site for help but never made an account and you guys are too nice! Hopefully i can/could help someone else out down the road. Until then i'm going to enjoy not being so slow! Thanks!:good:
Its because you have a LF6 modem. Its not the modem that GB had. The Kies upgrade only works if your phone is stock.
You can use the kies emergancy firmware upgrade option.
Is not black star 4.04?
nutpants said:
Is not black star 4.04?
Click to expand...
Click to collapse
1st post says GB.
rangercaptain said:
1st post says GB.
Click to expand...
Click to collapse
First post here or first post of black star ?
written in your mud with my stick
Your first post.
The latest black star is based on the ics 4.0.4 firmware from Singapore
studacris said:
Your first post.
The latest black star is based on the ics 4.0.4 firmware from Singapore
Click to expand...
Click to collapse
The original Tom I started with was 2.3.6 since lies wouldn't let me update to ice 4.0.4 I jumped the gun and flashed blackstar. While it is a great rom. I'm thinking of trying more while I got my feet wet.
1Note said:
The original Tom I started with was 2.3.6 since lies wouldn't let me update to ice 4.0.4 I jumped the gun and flashed blackstar. While it is a great rom. I'm thinking of trying more while I got my feet wet.
Click to expand...
Click to collapse
I've been flashing two roms a day looking for something that supports total recall and underclocking, with a network mode menu that has lte on it.
I think I am out of luck.and I have forgotten some roms so I may flash everything again and keep notes...
It's research not an addiction.
written in your mud with my stick
Stage 1 of acceptance is denial
studacris said:
Stage 1 of acceptance is denial
Click to expand...
Click to collapse
LOL ...
And of course my favorite ....
"Trying is the first step toward failure ".....(Homer Simpson )...(grin )
so my gtab will only show the three birds, i took the cover of the back and held down the reset button and it turned off then back on to the same screen. I even tried to nv flash it and it says that it currently update. Im not even able to get into recovery mode. Am i screwed or did i miss something, im sorta new to this stuff....thanks
1. What rom were you using?
2. Which version of CWM are you using?
3. What were you doing to the tablet when it froze like that?
There's a lot of things that can go wrong and which NVflash you use (250m partition or 350m partition) is going to be determined by which rom you wish to run.
The Gtablet for dummies site really helped me out while I was starting off, but it appears its no longer online.
Going to need some more info and I'll try to help as best and as fast as possible, but real life keeps me pretty busy most of the time.
tobalaz said:
1. What rom were you using?
2. Which version of CWM are you using?
3. What were you doing to the tablet when it froze like that?
There's a lot of things that can go wrong and which NVflash you use (250m partition or 350m partition) is going to be determined by which rom you wish to run.
The Gtablet for dummies site really helped me out while I was starting off, but it appears its no longer online.
Going to need some more info and I'll try to help as best and as fast as possible, but real life keeps me pretty busy most of the time.
Click to expand...
Click to collapse
i had ics, not sure what version, clock i think was 5. something. i know that this dont help much. i was able to get it working,
what i was trying to do was get it back to the way it came new so i could start all over with a new rom. Now i found what i thought was the stock rom but all it will do is sit on the screen where it says gtablet, i even let it sit over night,while i was at work and still the same screen.
Nobe (has some kick ass roms) has already done the legwork in another thread, try this:
http://forum.xda-developers.com/showthread.php?t=2070655
first download, should but you back at stock with a 1.2 branch ready to go.
I know it sucks, I've NVflashed dozens of times to work off of stock, I still get a little jittery every time I load another rom.
tobalaz said:
Nobe (has some kick ass roms) has already done the legwork in another thread, try this:
http://forum.xda-developers.com/showthread.php?t=2070655
first download, should but you back at stock with a 1.2 branch ready to go.
I know it sucks, I've NVflashed dozens of times to work off of stock, I still get a little jittery every time I load another rom.
Click to expand...
Click to collapse
so i tried reloading ics 4 beta that i had, after it said everything was installed and went to reboot it and just sat on the screen with birds. im able to turn off, go into recovery, and apx. So my father in law installed the 350 zip and jellybean 5.3 on his with no issues. i followed the same video he did and it said that everything installed good until i went to reboot, there it got stuck on the bird screen but im still able to do nvflash, apx and power down....Am i screwed ??
racefan82 said:
Am i screwed ??
Click to expand...
Click to collapse
We'll have to see.
See this thread, run the commands there and post the output.
Originally Posted by racefan82
Am i screwed ??
You may also try the detailed instructions by Raywaldo (Google Raywaldo for his site) on installing new ROMs on GTablet. In my opinion Smoother Bean v 1.5 (by nobe1976) is the best/fast ROM for this device.