HELP I THINK ITS BRICKED!! ill pay!!! - Mogul, XV6800 ROM Development

no my phone wont reboot at atll it turns on goes to a screen that says htc smart mobilty test only not for sale and in red below that it says no radio and doesnt go any further!!!!
please help me like seriously its not even my phone i need to straighten it out for him asap!!!!! i will even pay if some one can help me

press the power + camera + reset, load in the rom and radio, no need to pay, we're here to help! What is ur bootloader anyway ? is it unlock, stock rom ???

is that it because its not working is there any other method of hard reset?

i tried the buttons its not getting to the boot loader like at all , its unlocked using the titan unlocker and its just not booting up to any thing just that screen and the rom was 2.17 orignally then i flashed it to dcd's newest rom 2.2.1... then i steped it down to dcd 2.20 then i tried to flash the sprint 3.16 recent rom update and it got stuck at boot loader which was the oli bootloader which i think its called and i had to use exit_hbl and now its stuck. it will reboot but i still get that screen i mentioned before

i got to boot loader its says
TITA100
SPL-1.20.olipro

no wonder, you didn't follow instruction carefully, when you press power + camera and press reset , it should take you to tricolor, at that you can reload your sprint stock rom. Your phone is not brick yet

i just PMed you with my paypal info. Ill make sure your phone makes it out ok

thanks but if anyone its astrqnusx hed get money first i flashed the rom again it worked and then i tried to flash the radio and it just restarts and doesnt load at all??? its stuck at the mobilty screen???

what radio and rom did you use? I assume that you have Titan(Mogul) not touch

and after the radio i tried to reload the rom and it acted as tho it would work and is now stuck at the mobilty and i used now dcds 1.6.8 rom and the 3.27 radio... and now its really stuck maybe i should try the stock rom for sprint?

you are too rush on thing, you can't use rom 1.6.8 with the new radio, reflash back with stock rom from your vendor to get working condition. There is specific instruction if you want to load the radio

After you get back to your vendor (sprint/verizon) follow this instruction to flash new rom, don't miss a step http://forum.ppcgeeks.com/showthread.php?t=17667. Again, I see you have the touch, touch and mogul are two different device you can't use DCD or any rom here. You have Titan Phone right?

-my touch is fine thats a custom flashed rom from swiftblade and it works amazing with a radio update ive done alot of different things even reg edits
but the titan is just new to me

Is your phone working yet?

yea i got it thanks!

I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.

j3oomerang said:
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
Click to expand...
Click to collapse
You must be a sad little man.

nismofun said:
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
Click to expand...
Click to collapse
I had the same problem flashing my mogal, it's not difficult to fix. take a deep breath, it will take a little bit of work but you can do it. flash back to rom 2.17 relock, then flash sprint official rom 3.35. Then run hard spl 2.40 then flash new rom, take battery out, hard reset should fix your problem. the relocker,unlocker and everything else can be found by searching xda and ppcgeeks.com

I had the same issue, resolved:
http://forum.xda-developers.com/showthread.php?t=384298
Cheers,
Tom

Related

big mess up...help please

i started from the stock rom and started to update everything...im not exactly sure how i did this, but when i turn on my phone it goes straight to the spl-1.04.0000 RGBW screen....obviously i cant connect with activesync but my computer does see it because when i try to install other spl or roms or whatever it will start but stays at 0% and gives me an error....any suggestions???.....would be greatly appreciated, thanks in advance
What ROM do you have right now....did you attempt to load the Hard spl prior to doing anything else.
stock rom for VZW....i tried to do the hard spl and something went wrong during that process
colton1118 said:
stock rom for VZW....i tried to do the hard spl and something went wrong during that process
Click to expand...
Click to collapse
Um, flash back on the stock ROM
( http://ppc.stoleyour.net/oems/GetBackToStockXV6800.zip )
then follow my guide (see signature)
ha i got it to work....for some reason if i let it sit on the usb too long it wouldnt let me run the RUU ....so i put the stock rom in the RUU folder....brought it up...hit next once...then hooked up the usb and when i heard the first beep, i proceeded to start the update and it worked!....i am in the process of loading the stock rom at the moment....would u like to tell me what steps to take to install the new radio and new rom?....i had no problems until this new radio came along...thanks in advance .....now i think im gonna have to call and get a new a-key again
colton1118 said:
ha i got it to work....for some reason if i let it sit on the usb too long it wouldnt let me run the RUU ....so i put the stock rom in the RUU folder....brought it up...hit next once...then hooked up the usb and when i heard the first beep, i proceeded to start the update and it worked!....i am in the process of loading the stock rom at the moment....would u like to tell me what steps to take to install the new radio and new rom?....i had no problems until this new radio came along...thanks in advance .....now i think im gonna have to call and get a new a-key again
Click to expand...
Click to collapse
As I said, read the tutorial linked in my signature. It will make your life a hell of a lot easier in the long run. Everything is all there, in one easy place.
thanks i will make sure to read it carefully

Sprint touch pro problem

I flashed with SPL-0.37.CMONEX SPL, and it's successful.
I tried to flash Romeo's ROM, and it says it worked, but when the phone restarts it goes in a continuous loop of restarting.
Any ideas?
stuff said:
I flashed with SPL-0.37.CMONEX SPL, and it's successful.
I tried to flash Romeo's ROM, and it says it worked, but when the phone restarts it goes in a continuous loop of restarting.
Any ideas?
Click to expand...
Click to collapse
Well you did a big big no no by doing that.
What does your bootloader say?
You might want to personally contact cmonex on that because flashing a ROM for a GSM device on a CDMA can possibly brick your device.
I actually fixed it.
I guess it's because I flashed a GSM like you guys said.
I went to ppcgeeks and found a nice ROM on there that everybody liked for Sprint, and it successfully flashed and works now.
Even in bootloader mode I can still connect to my PC to flash a ROM, etc. So that saved me.
are you saying that using that hardspl, it worked for your cdma phone? but the rom for sure didn't work.
I confirm that the .37 cmonex works on Touch Pro (Sprint)....using it on mine.

Did I brick my phone?

Hey All,
I just started working on my phone last night. I installed some 3.xxx radio, and a new ROM that I cooked up. The problem is I did not unlock the phone before I did it, so now I start the phone and it is stuck in a pre-splash screen. Does anyone know where I can get the stock Windows Mobile 6 ROM for it so I can re flash it and then re-cook it? Cause it has OBVIOUS signs that I tweaked it, so it would be hard to explain that it was something "A guy at circuit city" told me to do to get WM6.1. Please help!
Okay I need more specifics. What carrier are you working from?
Stuff
Verizion X6800 went from 2.04 radio to a 3.xxx and wm6 to wm6.1
Just flash your phone with Olipro from microSD card, then u can flash any ROM (exp DCD 3.2.6) also from SD card.
shag1233 said:
Hey All,
I just started working on my phone last night. I installed some 3.xxx radio, and a new ROM that I cooked up. The problem is I did not unlock the phone before I did it, so now I start the phone and it is stuck in a pre-splash screen. Does anyone know where I can get the stock Windows Mobile 6 ROM for it so I can re flash it and then re-cook it? Cause it has OBVIOUS signs that I tweaked it, so it would be hard to explain that it was something "A guy at circuit city" told me to do to get WM6.1. Please help!
Click to expand...
Click to collapse
Make it easy on yourself. Flash a Telus or Sprint ROM over to your phone. THis will fix any booboo's. YOU MUST STOP CARRIER CUSTOMIZATIONS from runing. After this is done, reflash with nueSPL 2.47 like you did and then put on a custom ROM.
This is your easiest option.
If you want the hard route put your phone in bootloader mode and tell me line by line what you see. That will tell us at what state you are in if you really want to try to figure out what you did wrong.
Either way, let us know how it turns out.
Read here for steps:
More info
TITA100 MFG
SPL-2.40.Olipro
CPLD-9
Its still messed up trying the other suggestions. Does anyone know where I can get the original. WM6 rom so I can try again. Or can I unlock it without it so I can load a ROM....also I don't have an SD card.
Thanks for all the help so far

Stuck in bootloader, do i need stock alltel rom?

I attempted to update my ppc after attempting to fix mms, and everything went wrong. I started this thread yesterday on ppcgeeks: http://forum.ppcgeeks.com/showthread.php?t=51416 & then http://forum.ppcgeeks.com/showthread.php?t=51461
I tried to update to vetvitos black pill rom, not realizing it was a gps rom, and now when I start my phone, it has a PPCGeeks and PPCKitchen splash screen. At the bottom it says "No Radio"
I have an Alltel 6800 flashed to cricket. I have been looking for the answer for almost 24 hours straight now, and have not found one.
From what I've been reading, this is what I think ive learned:
The only way to get these roms working is with the Olipro 2.4 SPL on my phone, but the only way to get the Hard SPL on my phone is through activesync, which can't be done if i can't get into my phone. I don't think my phone is bricked, but I don't know where to go from here.
I think I need to reflash the phone to the stock rom (i think its 1.4) but I can't find it anywhere.
Can someone please help me?
just reflash with any stock one ... go to htc's site and you can download them there... the new one stock ones for alltel have GPS enabled on the radio too ... just dont let the customizations run when flashing to stock then flash to the rom of ur choice

Just flashed to EnergyROM, phone stuck starting up?

Hey guys, I just followed to flashing guide for my touch pro, and installed EnergyROM on to it. The HSPL and flash and everything seemed to go fine, but now im on
http://forum.xda-developers.com/showthread.php?t=508084
Step 3
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
My phone has been sitting at "PLease wait, phone starting up" for like 8 minutes.
This doesn't seem normal. . .should i be concerned?
Is your TouchPro CDMA or GSM? Sounds like you got the ROM to boot. Might just be taking a while. If it takes longer than 15 minutes, then reset the bugger. If something is indeed hosed with the ROM and it won't boot, just hold Volume Down and Power while hitting the reset button on the bottom, and you'll be back at the bootloader.
Cyfun said:
Is your TouchPro CDMA or GSM? Sounds like you got the ROM to boot. Might just be taking a while. If it takes longer than 15 minutes, then reset the bugger. If something is indeed hosed with the ROM and it won't boot, just hold Volume Down and Power while hitting the reset button on the bottom, and you'll be back at the bootloader.
Click to expand...
Click to collapse
It's verizon, so i assume it would be CDMA.
Alright, ill wait it out and give the reset a try if nothing happens. thanks
Curiously, if i end up being back at the bootloader, where should i procede?
actually i did the same installed a new rom and now it is stuck in start up , where it shows (touch Pro) stays lite for about a min or so then the whole phone reset. it seem to take the whole rom , because it said congrads installation is complete. now i cant do anything , like even install a different rom. i am wondering if i need to install a rom now via mini sd , or is there a master reset? and how am i going to install rom via mini sd
yellowz24 said:
actually i did the same installed a new rom and now it is stuck in start up , where it shows (touch Pro) stays lite for about a min or so then the whole phone reset. it seem to take the whole rom , because it said congrads installation is complete. now i cant do anything , like even install a different rom. i am wondering if i need to install a rom now via mini sd , or is there a master reset? and how am i going to install rom via mini sd
Click to expand...
Click to collapse
Like Cyfun said, hold Vol-Down/Power and Soft reset into bootloader. Plug the phone into USB and at the bottom serial should change to USB. Then flash away.
Otherwise, take a SD-micro and put your .nbh in the root folder, and rename it to RAPHIMG.nbh and reset into bootloader
holy crap that was fast, thanks , i am going to try it now
actually that worked, awesome!!!! i use to have a rom that was mighty rom (reborn) does anyone have the link for it , it seem to work the best on my phone!!
Sorry, never been a big fan of Mighty ROM. If you want something really Fast and Stable, I suggest Calkulins ROMs. Here is a link to the most recent release.
http://www.mediafire.com/file/tzmgjytkzm3/Calkulin's Touch Pro 23506 ROM v4.2.7z
I personally use NRG roms (due to them being updated so frequently). These however tend to be slightly buggy, and need many mods to suite individual needs.
Well once in bootloader mode i was able to get NFSFAN's rom installed with absolutely no issues.
So what did I do? Redownload a different version of energy rom and try it again. No luck there, the same thing happened. I think maybe energy rom just hates my phone. So I reflashed with NFSFAN's rom and i might just leave it with this. I dunno how much of a difference a noob flasher like myself will see between the two.
xmilkmanx said:
Well once in bootloader mode i was able to get NFSFAN's rom installed with absolutely no issues.
So what did I do? Redownload a different version of energy rom and try it again. No luck there, the same thing happened. I think maybe energy rom just hates my phone. So I reflashed with NFSFAN's rom and i might just leave it with this. I dunno how much of a difference a noob flasher like myself will see between the two.
Click to expand...
Click to collapse
EnergyROM has problems with Verizon phones.
SiqMawsh said:
EnergyROM has problems with Verizon phones.
Click to expand...
Click to collapse
wow that would have been good for NRG to mention in one of his posts... jeez.
antjc80 said:
Like Cyfun said, hold Vol-Down/Power and Soft reset into bootloader. Plug the phone into USB and at the bottom serial should change to USB. Then flash away.
Otherwise, take a SD-micro and put your .nbh in the root folder, and rename it to RAPHIMG.nbh and reset into bootloader
Click to expand...
Click to collapse
this post saved my butt guys. was having the exact same problem but didn't know how to reset to bootloader, thought my phone was bricked...
Ive never been able to get Energy to boot up on my Sprint TP. Tried flash dancing, etc, gets stuck on touch pro screen. Ended up using another ROM. Anecdotal of course
Me too...
That same thing happened to me, I've tried a few other energy ROMs but they've all been too buggy for me. I think he ported his GSM ROM over to CDMA because when I tried sending a text it asked for a SIM card.
I like psyki and I'm running Twisted NewSense right now...there are more CDMA ROM's over at ppcgeeks dot com
Maestro Nobones said:
wow that would have been good for NRG to mention in one of his posts... jeez.
Click to expand...
Click to collapse
why? the verizon touch pro is seriously gimped..MOST roms will barely run on them. the guys cook the roms according to how they like them, and likely theyre not on verizon if its not working. just flash a bunch of different roms till you find one that works, and i also have read that most verion touch pros seem to run better with pagepool at 6 so i suggest you try that..good luck with it, but remember that the guys that cook these dont owe any explanation if the dont want to. were getting state of the art roms (built for new phones) on our out-of-date touch pros for free.

Categories

Resources