Related
no my phone wont reboot at atll it turns on goes to a screen that says htc smart mobilty test only not for sale and in red below that it says no radio and doesnt go any further!!!!
please help me like seriously its not even my phone i need to straighten it out for him asap!!!!! i will even pay if some one can help me
press the power + camera + reset, load in the rom and radio, no need to pay, we're here to help! What is ur bootloader anyway ? is it unlock, stock rom ???
is that it because its not working is there any other method of hard reset?
i tried the buttons its not getting to the boot loader like at all , its unlocked using the titan unlocker and its just not booting up to any thing just that screen and the rom was 2.17 orignally then i flashed it to dcd's newest rom 2.2.1... then i steped it down to dcd 2.20 then i tried to flash the sprint 3.16 recent rom update and it got stuck at boot loader which was the oli bootloader which i think its called and i had to use exit_hbl and now its stuck. it will reboot but i still get that screen i mentioned before
i got to boot loader its says
TITA100
SPL-1.20.olipro
no wonder, you didn't follow instruction carefully, when you press power + camera and press reset , it should take you to tricolor, at that you can reload your sprint stock rom. Your phone is not brick yet
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
thanks but if anyone its astrqnusx hed get money first i flashed the rom again it worked and then i tried to flash the radio and it just restarts and doesnt load at all??? its stuck at the mobilty screen???
what radio and rom did you use? I assume that you have Titan(Mogul) not touch
and after the radio i tried to reload the rom and it acted as tho it would work and is now stuck at the mobilty and i used now dcds 1.6.8 rom and the 3.27 radio... and now its really stuck maybe i should try the stock rom for sprint?
you are too rush on thing, you can't use rom 1.6.8 with the new radio, reflash back with stock rom from your vendor to get working condition. There is specific instruction if you want to load the radio
After you get back to your vendor (sprint/verizon) follow this instruction to flash new rom, don't miss a step http://forum.ppcgeeks.com/showthread.php?t=17667. Again, I see you have the touch, touch and mogul are two different device you can't use DCD or any rom here. You have Titan Phone right?
-my touch is fine thats a custom flashed rom from swiftblade and it works amazing with a radio update ive done alot of different things even reg edits
but the titan is just new to me
Is your phone working yet?
yea i got it thanks!
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
j3oomerang said:
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
Click to expand...
Click to collapse
You must be a sad little man.
nismofun said:
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
Click to expand...
Click to collapse
I had the same problem flashing my mogal, it's not difficult to fix. take a deep breath, it will take a little bit of work but you can do it. flash back to rom 2.17 relock, then flash sprint official rom 3.35. Then run hard spl 2.40 then flash new rom, take battery out, hard reset should fix your problem. the relocker,unlocker and everything else can be found by searching xda and ppcgeeks.com
I had the same issue, resolved:
http://forum.xda-developers.com/showthread.php?t=384298
Cheers,
Tom
Before I flash my phone for the very first time, I need to know some things.
I know there are threads who give info, but they aren't always up-to-date or handeling about my phone.
So I want to know, I heard about a third version of HSPL.
What are the things that I need to do?
If I want to install a new rom, I first install HSPL, then the rom, but do I have to install something like a radio too? or something else?
Will a custom rom always work in my language (BE/DUTCH),
and which rom is good for texting (no lag etc).
I want a clean and smooth rom, with not much BS. Any advice?
I know it's a lot of questions, but I'm stuck with them for a long long time and I want to be well prepared.
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
Follow this thread step by step and you cant go wrong.
Its link you to HSPL3 and anything else you might need.
It tells you how to flash a radio (if you need to).....
It will tell you which radio you need in the thread for the rom your going to use....
You just have to read through all the rom threads to find out which one is going to be best for you...... I'd reccomend energy roms... I think they might only be available in english though. Different languages available will be listed in the rom thread...
The flash only takes 10 minutes...its the reading up first thats the time consuming part....
Hope it all goes well for you
thanks for the advice, I will follow it and read everything 10 times before flashing anything
HectiQ said:
thanks for the advice, I will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
Yea. Read it very very very carefully. Once you grasp the process, it's so easy and intuitive.
HectiQ said:
i will follow it and read everything 10 times before flashing anything
Click to expand...
Click to collapse
blimey, you can come again! hehe
So here are the steps that I'm about to take: (first off I saved all my data, sms, etc elsewhere).
1) flash HSPL 3
http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
thread HSPL3 said:
Seems all ROMs based on 1.42, 1.66, 1.XX can work with 2.08 SPL without problems.*
Click to expand...
Click to collapse
My ROM is 1.66.404.1 (76641) NLD, so it seems that this is okay to do. I think I have the 'usualleo', can I check this somewhere?
When I look into RAM SIZE, it says 512 MB, and I don't know what telstra is, but I definitly won't need the last one (1024). I also think in HSPL itself, I need to choose 2.08.HSPL.
Next, I'm about to flash my first custom rom, and will follow the steps given here:
Flashing Via ActiveSync
1. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your computer
2. REMOVE SIM and microSD CARDS!! (this is a precautionary measure and is not compulsory)
3. Turn phone back on and wait until it syncs with your PC
4a. If your Rom is a .exe (customRUU.exe is already included in the Rom file) then run the file
4b. If your Rom is a .nbh file then run the CustomRUU.exe from the Roms Folder (if one isnt included then download it *HERE*)
5. Follow onscreen instructions to set up your New Rom
6. Once phone has gone through the customisation procedure then replace Sim and microSD Cards
7. Perform a Hard Reset to clear any leftover data from your previous Rom (see intructions at bottom).
8. Set up phone as required and job done.
Click to expand...
Click to collapse
I really can't find what ROM I should use..
I want a rom with landscape built in and the sms client 2016.
Are there much roms which include this?
yea thats all OK, except you dont really need to remove sim and sd. Only if you're stroubleshooting.
Plus, most cooked roms support 'autoinstall', , , create a folder on your sd card called autoinstall, put in there any cabs that are essentials, and the rom will install them as part of the post flash setup process.
as to which rom for what, thats gotta be down to you. Theyre all good, theres no such thing as a best rom, and what works brilliantly for one person makes the next person weep with frustration.
Flashing only takes 5/10 mins, you can try out a dozen roms in an evening.
Dont forget you only need apply hspl once. It will stay there till you either flash a stock from sd card (dont do this, theres no need nowadays) or you can run hspl2 (yes, hspl2) and choose your stock spl (1.42.0000 or 1.66.0000 or whatever)
can I run HSPL 2 after I firstly installed HSPL 3 for the custom rom I'm about to choose? And I'm guessing roms come packed (7z/zip/rar), need to unpack those files I guess? How do you actually start cooking a rom?
edit: I also gonna remove everything (hard reset) before I start flashing anything, so I start clean
Okay this is coming really close now:
http://forum.xda-developers.com/showthread.php?t=612580
Download Artemis 23.0 level A NLD (this I'm about to use)
I'm gonna go with artemis, but I also want a higher radio version. should I update my radio or my rom first? And how do I know which radio is compactible with that rom? the ones adviced in the rom? http://www.pilotlogic.com/artemis/htc_hd2_radio/ these?
I'm a bit confused what steps to take, in which order.
I know I have to HSPL first, (gonna use HSPL 3)
but then I doubt which to do first, rom or radio. And is it easy to install? Can I make any mistakes on this? what are the things that need special attention? thanks in advance guys, for all the help!
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% and is about to reboot, hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
samsamuel said:
doesn't matter which order, except if you do rom first your phone will hang till you enter bootloader and flash a matching radio so most people say radio first.
heres how i'd do it
1 hspl3 (only needs doing once, not every time you flash)
2 enter bootloader manually
3 flash the radio
4 when it gets to 100% hold down voldown to go back into bootloader
5 flash the rom
6 allow phone to boot properly
Click to expand...
Click to collapse
SUPERB!! Thank you for the clear advice! Will try this step by step tonight. Thanks samsamuel I really like xda everybody is helping out :d
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
conantroutman said:
I used the video guides the first time..........
Id have freaked out about the radio hanging at 96% if I hadnt already seen that on the video.
Watch each step before you do it, that way you know what to expect.....
Happy flashing.........
Click to expand...
Click to collapse
oh indeed! I'ld freak out too! haha. Gonna check it out. Thanks conantroutman!
I hope the artemis rom (Artemis 23.0 level A NLD)
is compactible with this radio version: 2.10.50.28_2
Maybe anyone knows? if not I might ask it in the Artemis thread
think I'm good to go then, well prepared, thanks to you guys
update, just installed HSPL going slowly to the next step
damn guys? I'm really DOUBTING, should I flash a rom or a radio first?
I'm scared if I flash my rom first my cell won't startup because of incompactibility with my phone's rom? Or reversed ways. Can anyone advise me before I start?
Edit: took a leap of faith and trusted on the posts above, and I'm now running a new radio now only my rom and I'm done. Gonna see the video's and tuts first. I'll keep you updated. WOOOOOOOOOOOOOOW this radio is GREAT! my sound quality has improved like A LOT! very strange, with my original rom, I always heard noises, now it's way clearer when I call
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
conantroutman said:
hey man, nearly there.....
once your done you'll wonder what all the fuss was about....
only problem is...... you'll be hooked and looking for something else to flash...
glad its all going well.....
Click to expand...
Click to collapse
yes, and it's all thanks to you guys here at xda, I even got to try android wow. But I'm gonna stick to mobile shell for a while, combine it with a new rom I'm about to select
When i went to flash the latest update for the Energy ROM it didn't flash properly to my HD2 and now im getting the red,green,blue and white screen and it says
PB81100 HX-BC
SPL-142.HSPL XE
0X05
CotullaHSPL 0X30
Upgrade ROM code error
please try again
Ive tried reflashing but even though i have it plugged into the USB it wont recognise it, i took out the SD card and SIM card and done a hard resent but then i got some triangular type sign on the phone so took the battery out and put back in, held the button down button and im now back to the screen as like what ive posted about, this has never happened before as any ROM ive flashed has been succesful, ive done a search of the forum and cant come up with anything, can someone be of some assistance here please,cheers.
jonny68 said:
When i went to flash the latest update for the Energy ROM it didn't flash properly to my HD2 and now im getting the red,green,blue and white screen and it says
PB81100 HX-BC
SPL-142.HSPL XE
0X05
CotullaHSPL 0X30
Upgrade ROM code error
please try again
Ive tried reflashing but even though i have it plugged into the USB it wont recognise it, i took out the SD card and SIM card and done a hard resent but then i got some triangular type sign on the phone so took the battery out and put back in, held the button down button and im now back to the screen as like what ive posted about, this has never happened before as any ROM ive flashed has been succesful, ive done a search of the forum and cant come up with anything, can someone be of some assistance here please,cheers.
Click to expand...
Click to collapse
Hello!
Try this:
Full charge your phone's battery.
Download your stock ROM and install it by MicroSD method - it will erease your HSPL, so you will need to install it again.
Install the HSPL again.
Do a TASK29.
Now redownload your custom ROM and reflash it!
Here some helpfull links:
StockROM thread: http://forum.xda-developers.com/showthread.php?t=577717
How to flash custom ROMS: http://forum.xda-developers.com/showthread.php?t=609477
TASK29 thread: http://forum.xda-developers.com/showthread.php?t=644781
It will sove your problems =P
Thanks mate ill give this a go
jonny68 said:
Thanks mate ill give this a go
Click to expand...
Click to collapse
Please tell us if it works, ok?!
help!!!!
hi iv just flashed my hd2 using the sspl and now i cant phone people because of the radio how can i install it without the hspl because it wont let me install that because i havent got spl 1.42.000 or like the guy above he's doing it by the micro sd way how do u do this?? reply asap thanks
joshicole said:
hi iv just flashed my hd2 using the sspl and now i cant phone people because of the radio how can i install it without the hspl because it wont let me install that because i havent got spl 1.42.000 or like the guy above he's doing it by the micro sd way how do u do this?? reply asap thanks
Click to expand...
Click to collapse
Dude, READ my first post!! Here you can find some usefull links!!!
Your case is diferent the OP one, so I sugest you search and post in the right place.
I hope you understand.
Ps: I can't understand your problem with the phone. Try writing it in a better way!
digao100nocao said:
Please tell us if it works, ok?!
Click to expand...
Click to collapse
unfortunately when i go to download the stock ROM i downloaded from the HTC website it stays at 0% and then gives me an error message,tried numerous times but no luck, i was able to download HSPL3 though but that hasn't actually made any difference with regard to actually solving my problem,i done another search and tried numerous things but no luck, just have the multicoloured screen as before, have spent hours now, surely there has to be an easier solution to this as no doubt this has happened to a few people before!
jonny68 said:
unfortunately when i go to download the stock ROM i downloaded from the HTC website it stays at 0% and then gives me an error message,tried numerous times but no luck, i was able to download HSPL3 though but that hasn't actually made any difference with regard to actually solving my problem,i done another search and tried numerous things but no luck, just have the multicoloured screen as before, have spent hours now, surely there has to be an easier solution to this as no doubt this has happened to a few people before!
Click to expand...
Click to collapse
flashed htc stock by sd card? if yes, then its because the stock HTC rom isnt your phones stock, and teh first thing it does when flashing from sd is remove hspl, even though the rom itself fails to flash (because hspl is no longer there)
Boot into bootloader, see what spl says.
If it ends .0000 then use hspl2 to re apply hspl,
re-enter bootloader, connect usb, does 'serial' change to 'USB'?
If yes, try running your rom flash again, but do it over usb. (Can use the htc stock rom for this, for simplicity)
samsamuel said:
flashed htc stock by sd card? if yes, then its because the stock HTC rom isnt your phones stock, and teh first thing it does when flashing from sd is remove hspl, even though the rom itself fails to flash (because hspl is no longer there)
Boot into bootloader, see what spl says.
If it ends .0000 then use hspl2 to re apply hspl,
re-enter bootloader, connect usb, does 'serial' change to 'USB'?
If yes, try running your rom flash again, but do it over usb. (Can use the htc stock rom for this, for simplicity)
Click to expand...
Click to collapse
what do you mean by this mate?
Yeah the spl says spl-2.08.0000 8G XE
when i go to hspl2 to re apply hspl it gives me an error message saying i need to have SPL 142 on my device, this is doing my bleedin head in and ill never mess about with the dog and bone again if i manage to get this sorted after all this it costs too much and im without a phone now until this is sorted, cheers for your assistance mate
jonny68 said:
what do you mean by this mate?
Yeah the spl says spl-2.08.0000 8G XE
when i go to hspl2 to re apply hspl it gives me an error message saying i need to have SPL 142 on my device, this is doing my bleedin head in and ill never mess about with the dog and bone again if i manage to get this sorted after all this it costs too much and im without a phone now until this is sorted, cheers for your assistance mate
Click to expand...
Click to collapse
Mate, try HSPL3. It will work with your SPL (2.08.0000).
It smells like you have a bad flash, maybe your ROM image corrupt in download or in the transfer process.. It does not change the things, to fix it you have to "erease your NAND".
I told you to flash a stock Rom from SD to see if the error stops. If it stops, then you will have to install HSPL again, because it is ereased each time you flash a stock ROM from SDCard.
Then, the TASK29 process is the more important thing, because it will "erease" your NAND and will prepare the NAND blocks for the new flash.
And the CustomROM flash complete the process.
I hope it helps.
EDIT: Fell free only to install HSPL3 (2nd post of this thread http://forum.xda-developers.com/showthread.php?t=611433) and do a TASK29 (this thread http://forum.xda-developers.com/showthread.php?t=644781) before installing again your CustomROM. Those 3 steps are the important ones!
**DO NOT FORGET TO DOWNLOAD YOUR CUSTOMROM AGAIN, BECAUSE IT COULD BE A DOWNLOAD CORRUPTION PROBLEM, OK?
digao100nocao said:
Mate, try HSPL3. It will work with your SPL (2.08.0000).
It smells like you have a bad flash, maybe your ROM image corrupt in download or in the transfer process.. It does not change the things, to fix it you have to "erease your NAND".
I told you to flash a stock Rom from SD to see if the error stops. If it stops, then you will have to install HSPL again, because it is ereased each time you flash a stock ROM from SDCard.
Then, the TASK29 process is the more important thing, because it will "erease" your NAND and will prepare the NAND blocks for the new flash.
And the CustomROM flash complete the process.
I hope it helps.
Click to expand...
Click to collapse
right there has been some developments, HSPL3 has done something an the phoe is now turning on and off, so ill try and download the stock ROM now
if spl says 2.08.0000 then you have chosen teh wrong option in hspl3, you should have chosen 2.08.hspl.
.0000 is stock.
You do not need spl 1.42. to apply hspl, that is old info, hspl2 or hspl3 should work fine.
jonny68 said:
right there has been some developments, HSPL3 has done something an the phoe is now turning on and off, so ill try and download the stock ROM now
Click to expand...
Click to collapse
Man, if your phone is turning on and off it could be the uncharged battery.
Try charging your battery for about 1 hour before trying to reflash - do it with the phone turned off.
Again: Use HSPL2 or 3. Select 2.08.HSPL from the menu. And then TASK29..............
Thanks again guys its getting late so ill just leave the phone charging and get back to it after work tomorrow evening, again thanks for your assistance, still not there yet but hopefully by tomorrow evening the problem will be rectified.
jonny68 said:
Thanks again guys its getting late so ill just leave the phone charging and get back to it after work tomorrow evening, again thanks for your assistance, still not there yet but hopefully by tomorrow evening the problem will be rectified.
Click to expand...
Click to collapse
Relax dude.. You will kick this problems ass tomorrow!!
..........
Sorted!!
At last i have managed to solve the problem, basically i just extracted a stock ROM onto my micro SD card which was in my laptop,put SD card back in phone,went to bootloader, done the task 29, tried to flash Energy ROM 21911 Aug 1st update but having tried several times it was giving me an error message so last throw of the dice as it were i flashed the other Energy build 23569 and it worked, you;ve no idea how relieved i am i kept thining id have to leave the phone into repair which would cost an arm and a leg but thanks to the good people on here in particular digao100nocao and samsamuel and the search function was useful too i have solved the problem and ill ensure i always do a hard reset any time im flashing again as i believe that was what probably caused the ROM not to flash properly the first time (i never bothered doing a hard reset previously)
Virtual beers to everyone much obliged folks and if i can be of asisstance to anyone myself on here i will.
jonny68 said:
At last i have managed to solve the problem, basically i just extracted a stock ROM onto my micro SD card which was in my laptop,put SD card back in phone,went to bootloader, done the task 29, tried to flash Energy ROM 21911 Aug 1st update but having tried several times it was giving me an error message so last throw of the dice as it were i flashed the other Energy build 23569 and it worked, you;ve no idea how relieved i am i kept thining id have to leave the phone into repair which would cost an arm and a leg but thanks to the good people on here in particular digao100nocao and samsamuel and the search function was useful too i have solved the problem and ill ensure i always do a hard reset any time im flashing again as i believe that was what probably caused the ROM not to flash properly the first time (i never bothered doing a hard reset previously)
Virtual beers to everyone much obliged folks and if i can be of asisstance to anyone myself on here i will.
Click to expand...
Click to collapse
Good news my friend!
I'm happy that your problem is solved now.
Have a nice week
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.
I had Magloader and WP7 in it. As time went by I upgraded to HD7 and never looked back. It's been a while since I have touched XDA and WM6.5.
My assumption is that even with Magloader, you only have to flash your stock ROM and it'll revert back to WM.
Mine won't go on and I suspect that I flashed a Non-Tmobile compatible ROM. Can someone confirm that this is the case? Here's the ROM string: RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship.exe
I understand completely that if I messed it up then it's messed up. I just wanna make sure there might be other solutions or something I am missing out.
-Thanks in advance!
----------------------------------
Is this a final answer? I need to know if it's bricked and nothing else can be done.
Anyone thinks a shop may be able to recover it back? It won't go on at all..
tictac0566 said:
Sometimes, it´s easier than you think.
You´ve got 2 options to get rid of HSPL. One of those options would be simply described in the original thread of HSPL.exe software. If you would have checked this program a little bit, you would have noticed the very fact that you can select what SPL or HSPL you want to install.
Second, you can flash your stock ROM via SD card method, this will replace HSLP and everything else - this does not work using RUU.exe via USB.
Click to expand...
Click to collapse
By the looks of the radio installed (2.04.50_22_2), I would say that you did brick your T-mobile phone. Take a look at the following thread for a possible solution to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=668347
Hi thanks for the response Lavell. Would MTTY be able to do anything?
The phone doesn't turn on at all, or it seems.
I've never bricked one before so Idk if this is the way it happens.
its gone. dead. it will need JTAGging or a new mainboard.
that thread wont help, the phone wont power on, and that thread requires you can get into bootloader.
that's a really early rom you used, the tmous didnt even exist when that rom shipped.
If you want to get rid of it let me know please!!!
Hey guys, don't mean to hijack the thread but I got the same problem here.
Had WP7 but could not use 2g so I went back to MAGLDR113 and installed the file below:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
It went all the way to 100% but now the phone is dead. Computer makes a sound when I plug in usb but I have tried changing batteries and all but it doesn't work.
Does anyone know in Dallas or areas around how to do that JTAG thing?
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
S2K_MoZo said:
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
Click to expand...
Click to collapse
At its most basic, its the same for ALL hd2's, ,
1 get the correct stock rom for your region&vendor
2 flash it
thats it.
Sadly lots of times this is shortened to
1 get stock rom
2 flash it
and people just assume they can use any stock rom, and since they usually already have HSPL installed, it allows the flash to start, and tmous phones die.
Yeh think the HSPL installer should of had a TMOUS version either blocking known bricking radio & ROMs or just an on screen message warrning & advising on checking before comencing with flash.
At end of the day it is the users fault for not researching or using a TMOUS rom to be 100% safer !
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo