htc touch pro EVDO hidden setting ? - Touch Pro CDMA

Hi gurus
i heard that theres a hidden setting in htc touch pro so we can make the evdo keep still and not dropping to 1x
anybody can help we this ?
thanks in advance.....

help..... ..

You can set it up for EVDA only, but where there is no 3G coverage you will get no data at all..... I wouldn't advise on this, keep it on hybrid

If you go to Start->Settings->Personal->Phone, then go the the Services tab, find Mode of Operation in the list and tap Get Settings, you can set it to EVDO only.
Now, keep in mind that your phone has to drop to 1x to receive phone calls and text messages, so while in EVDO only, you won't be able to get those. Also, if you move out of an EVDO coverage area, you will just lose signal completely.
If I recall, this option is not available on Stock ROM. At least, I don't remember seeing it until I installed a custom ROM. If you're on a stock ROM and don't have it, there's probably a Reg hack you can do to get it to show, but someone else will have to help you out on that one, cuz I'm not sure what it would be.

I would just stick to what it is and leave it. Would be better for you.
No 3G coverage = no data
But thats my opinion.

Hidden "mode of operation"
Hey man,trythis; install a registry editor then..HKLM\Software\OEM\PhoneSetting\HiddenModeOperationPage
Change from 1 to 0
Save and soft reset
After resetting, go to:
Start > Settings > Phone > Services > Mode of operation
You will now have 3 choices, Hybrid (default), EVDO, and 1X. This is great for those stuck on the fringe areas of 1X and EVDO
It works on the Treo pro, might work on yours

its a visible option on my sprint TP with the HTC2.01 ROM

Related

Force 1X without going to EPST and reset?

As a battery saving technique I have been in the habit of forcing the radio to radio 1X only (no EV-DO) whenever I know I don't need heavy data usage. This method still allows my exchange server to sync by push, but internet browsing is way slow. So if I am going to need browsing, I switch back to EV-DO.
But to to this, as far as I know, requires going into EPST and changing the Modem Setting Preferred Mode to "CDMA Only".
Unfortunately this method requires a soft reset to make it work which is fine if you don't need EV-DO speed downloads for a few hours/days. But if you want to switch between 1X and EV-DO quickly its not a workable solution.
Does anyone know a method of changing from "1X only" to "EV-DO" and back without going into EPST and without a soft reset?
maccaberry said:
As a battery saving technique I have been in the habit of forcing the radio to radio 1X only (no EV-DO) whenever I know I don't need heavy data usage. This method still allows my exchange server to sync by push, but internet browsing is way slow. So if I am going to need browsing, I switch back to EV-DO.
But to to this, as far as I know, requires going into EPST and changing the Modem Setting Preferred Mode to "CDMA Only".
Unfortunately this method requires a soft reset to make it work which is fine if you don't need EV-DO speed downloads for a few hours/days. But if you want to switch between 1X and EV-DO quickly its not a workable solution.
Does anyone know a method of changing from "1X only" to "EV-DO" and back without going into EPST and without a soft reset?
Click to expand...
Click to collapse
do you have a 'mode of operation' page under phone settings?
if not, it will show for all carriers on next release...
i can look up the reg to unhide the setting for you when i get home.
Thanks dcd. I was a bit worried about that "Mode of Operation" setting because my phone doesn't have it available. A search through the forums mentioned that setting but because my phone didn't have it I assumed that the titan/WM6.1 didn't support it.
Now that I know it is a reg hack to make it viewable I will have a look in the registry. If I can't find where to change the setting myself I will await your answer.
just search your registry for HiddenModeOperationPage
OK found it.
If anyone else is interested in using "1X only" to save battery power AND the "Mode of Operation" item is missing from Start-->Settings-->Phone-->Services tab then you need to edit the registry using PHM Registry Editor (or similar).
Go to HKLM>Software>OEM>PhoneSetting and then change the the Reg_Dword called HiddenModeOperationPage from value 1 to value 0.
Then you will have the ability to switch between 1X, EV-DO and Hybrid in the phone settings page. There is a warning in the registry that says that if you select EV-DO you will lose the ability to make voice calls (presumably because EV-DO only supports data not voice and data like 1X). Therefore I would assume the options you should choose are really between 1X and Hybrid.
Thanks dcd for the help. Hope it assists anyone else looking to save battery power.

[Q] 3G Problem in need of help

I've searched all over for an answer but I can't really find any post with my issue. But before I jump in to it I thought I would provide background first to show where I'm at.
Htc thunderbolt -> One click rooted -> NAND made -> Wipe data -> flashed CM7 alpha -> Everything running smoothly (3g working before flash(3 weeks) and after flash(1 day) perfect).
Now, out of the blue, the 3g started to fail (day after flashing the rom). I get stuck on 1x (Note. I'm in 0 coverage for 4G). The mobile network type says unknown or CDMA-1xRTT (it changes back and forth a lot).
I restore the the phone from the backup (3g working one) and its in the same condition as it was in CM7, 1x or unknown or even no service.
Back in stock rom I dial the ##778# and the the enabling Rev .A. I commit, reboot, 3g!.... 1x... and it changes back and forth from there. So I also dialed the *#*#4636#*#* and change the unknown (or a 4g setting) to CDMA Auto prl. I get nothing, reboot, still goes between 3g 1x and nothing. It also force closes me often, is that normal?
Reflashed the CM7 and thats where it is.
I'm also in a strong 3g area, never get 1x. Another note is that it kicks off the "3g" i have when on the market or browser and says a Network error has occurred.
The majority of the time right now I have 1x or nothing (just 3-4 bars) with all these settings.
Any help or insight would be wonderful and greatly appreciated!. I've run out of ideas.... If any more data is needed just ask me.
[Edit]
So when changing the settings in the 4636 code I found it on CDMA only? I assume that favors 1x. So I change it to the Auto prl, then it force closes. I go back in to see its now on unknown, so I change it again. This time it sticks and 3g comes on. I'm not sure if I can trust this 3g or not. Any ideas?

Enabling 2G data connection purposely on the Photon

I feel really stupid for asking this, but here goes. I have a Photon, just got one of the T-Mobile SIM cards, activated it with the $30/month unlimited web+text+100 minutes talk time thing and I'm wondering - for my own purposes, mind you - how to purposely enable only 2G data on the Photon, if at all possible.
Now, at the moment I'm running the stock 2.3.4 ROM, unlocked and rooted so I could install the KDDI radio, and my T-Mobile speeds are consistently in the 5-6 Mbps range which is more than acceptable and I have zero issues with that service at the moment.
Having said that, and again for my own purposes, is there a specific way to get the 3G data connection switched to straight 2G/EDGE mode directly on this thing? I will be moving over to cybik's CM7 ROM here shortly and I can't recall (when I ran it a few days ago) if there's an option in the Mobile networks menu to switch from 2G to 3G. I was able to see the T-Mobile 2G network under the secondary menu as an available network, and I selected it but it still appears to be 3G.
Guess I'll play around with it some more, maybe there's a toggle on Google Play or something, just thought I'd toss the question out since I can't seem to locate such a toggle myself. DOH!!!
Update:
Installed that CM7 from cybik and it does have a menu toggle to directly enable 2G mode, works fine here for me (140-180 Kbps consistent, works great for streaming audio which I listen to frequently, iHeartRadio and a bunch of different police scanners online from RadioReference using Scanner Radio Pro). But I'm still wondering if it's possible to enable that with the stock 2.3.4 ROM directly, if anyone can offer any info, thanks.
Check this thread out.
http://forum.xda-developers.com/showthread.php?t=1103967
also here:
http://www.amilkhanzada.com/2012/03/how-to-enable-select-network-on.html
It is for the atrix, but should be similar for stock.
Also you are correct CM7 has those settings allowed by default.
Also you can set the mode in the *#*#4636#*#* menu. Under phone information > CDMA Only = 2G ; EvDO only = 3G
Also: be careful editing the settings in the *#*#4636#*#* menu under the stock rom. It did it once and locked my phone on GSM and had to SBF to restore CDMA. Dunno why it did that but I have seen others have the same issue. IIRC i didn't even enable GSM it just happened when I entered the phone information menu.

[Q] How to avoid 4G / 3G connection?

Since i got my OG, i always have used 3G / 4G connection
but sometimes i want save some battery and use EDGE or GPRS connection as many people here in Brazil does, but i dunno how!
how to do that?
thanks!
-settings
--wireless and networks
---mobile network
----network mode
-----GSM only
that's it
didn't have this "Network mode" in my phone...
some alternative way to do that?
*#*#4636#*#* in dialer, phone info, set to GSM Only.
Sent from my LG-E970
To get the network mode menu you can edit build.prop if you're rooted.
A tool like "Android Tuner Free" makes it easy to backup your build.prop and change it, if you don't already have a favored method.
The entry to change is "ro.radio.networkmode" and it is probably set to "disable". Set it to "enable", reboot your phone, and you will have the network mode menu available. But, I'm pretty sure changes made in this menu revert upon rebooting (maybe that is what the next setting in there, "ro.radio.topreviousmode" is for - I didn't touch it).

[Q] VZW Google Edition ROM 5.9 NO LTE

Hi, I am currently using the VZW Google Edition ROM 5.9 and have service and WiFi. My problem is it only connects to 3G, and not 4G. As advised, I have not gone into network settings, but I did open Phone Info and see that it is set to LTE/CDMA auto. Any reason I am not getting LTE?
Just a thought, but maybe you could check the APN settings and see if they are different than what you should have.
Heatshiver said:
Just a thought, but maybe you could check the APN settings and see if they are different than what you should have.
Click to expand...
Click to collapse
Thanks for the response. I am kind of new to this, where do I check the APN settings and how do I know what I should have? Thank you.
Do you have LTE coverage in your area? If so, can you use another phone/friend to double check if LTE is working? I only ask because we had LTE go out where we live.
Gir brings up a good point, I don't have 4G where I am (and probably won't for years!), but that may be simplest as long as they use the same network (although many carriers piggyback off the same network).
The APN settings should be under "Settings > More networks > Mobile networks > Access Point Names". On a stock ROM you have to get to the actual file through ADB, you should be able to see it if you have an aftermarket ROM. The settings for the APN will depend upon Verizon. Here is a good post with APN settings for Verizon, the first part is for Android.
Coverage could always be the issue as that has plagued me more times than not.
From the ROM thread:
Go into mobile network settings.
Verify that your CDMA subscription is set to RUIM and not NV.
For good measure go into the rest of the options and set it to CDMA/LTE, automatic, and allow data roaming.
Back out to your home screen.
Then go into Phone Info app.
Scroll to bottom and tap radio off.
Open the drop down list and select CDMA/LTE auto (PRL).
Turn the radio back on.
Reboot.
Upon reboot open Phone Info again.
Verify it is set to CDMA/LTE auto (PRL)
** you should have full service now * *
** if not * *
In Phone_Info(*#*#4636#*#*):
Try CDMA auto (PRL)
Then try CDMA/GSM/LTE
If those still don't work then your nv_data needs reset. The only way to do that is in the hidden menu dialer codes in a touchwiz-stocktype rom
If you destroy your nv_data and cannot get data back via the above you need to (stop screwing with your network settings)flash back to a TW ROM, enable hidden menu, and do a NV data reset via dialer code. After doing that make sure your phone is not in modem mode under diag dialer code. Until I update this section Google is your friend. And it is available information, verified. Your lack of searching skills doesn't mean pester my inbox...
I do have LTE in my area, as I had 4G before I loaded the rom. I do not have an APN menu under mobile networks. Do you think it could help to dial *228 option 2 to update roaming? Or possibly a new 4G sim card?
Anything about updating I would research first and be wary of... A new SIM card could help, but I'm assuming it is not the problem. Did you make a NANDROID before you changed ROMs? You could then go back and see it you still got 4G to make it evident if your SIM card is the problem.
FIXED
Just needed a new sim card. Thanks guys. I appear to be receiving signal bars with my LTE on the GPE rom as well.

Categories

Resources