Related
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
due to popular demand (my own really, hehe) and sanction from the man himself, here is a new thread dedicated specifically to Asukal's MUI projects for the Hermes, specifically the japanese X01HT. this is a spin-off of this thread: http://forum.xda-developers.com/showthread.php?t=284765 .
below, i've made a cliff-notes of sorts, with links to the various MUI related files within the original thread. the original files remain on that thread for the time being.
MUI relevant posts:
English MUIs:
http://forum.xda-developers.com/showpost.php?p=1077551&postcount=64
http://forum.xda-developers.com/showpost.php?p=1080864&postcount=116
http://forum.xda-developers.com/showpost.php?p=1081165&postcount=119
http://forum.xda-developers.com/showpost.php?p=1100956&postcount=195 *HTC-Z*
German MUIs:
http://forum.xda-developers.com/showpost.php?p=1078882&postcount=90
Security warning:
http://forum.xda-developers.com/showpost.php?p=1078954&postcount=97
http://forum.xda-developers.com/showpost.php?p=1079158&postcount=102
Remove Japanese 'Today' Items:
http://forum.xda-developers.com/showpost.php?p=1080487&postcount=115
English Soft Keyboard:
http://forum.xda-developers.com/showpost.php?p=1081257&postcount=122
http://forum.xda-developers.com/showpost.php?p=1082056&postcount=134
Japanese to English Bubble fix:
http://forum.xda-developers.com/showpost.php?p=1082823&postcount=141
Transcriber:
http://forum.xda-developers.com/showpost.php?p=1083600&postcount=148
http://forum.xda-developers.com/showpost.php?p=1083697&postcount=152
English Today Keys Fix:
http://forum.xda-developers.com/showpost.php?p=1108577&postcount=202
Info about uninstall/hard-reset:
http://forum.xda-developers.com/showpost.php?p=1109289&postcount=204
Terminal Services Client:
http://forum.xda-developers.com/showpost.php?p=1119779&postcount=217
Softbank MMS Program English Translation:
http://forum.xda-developers.com/showpost.php?p=1172374&postcount=257
http://forum.xda-developers.com/showpost.php?p=1172472&postcount=261
English Video Call Button:
http://forum.xda-developers.com/showpost.php?p=1089229&postcount=176
i'll try to keep this post up-to-date and either transfer the files or direct links to the files to this post, but for now, continue to refer back to that thread for nitty-gritty details. hope you all find this useful!
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
PLS DONT INSTAL or USE on Xo1H <Toshiba Device>
this is not compatible for Toshiba or any other device with WM6.
Zgembo said:
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
Click to expand...
Click to collapse
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
khammo01 said:
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Click to expand...
Click to collapse
hi, of curse i say OK you to repack as your want
(but i dont know SB&MS Axis power will say OK )
i think only one cab "Welcom_Darkside_R6.zip" was included
all patches, but cabs for securities,
and you can extract canbs with CAB manager (trial version is enough)
http://www.ocpsoftware.com
Good luck!
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
well, i never did relay back my experience with the english MUI setup, but i was able to successfully install it. actually, at first, darkside6 didn't work for me immediately after installing the cab. rather, what i had to do (as one post in the previous thread tipped me off) was to find the extracted individual cabs in the temporary files folder and install them separately. after that and a soft reset, things seemed to be installed fine. most menus were changed to english (with the exception of the menus in the Softbank mail program and some drop-down menus, and shortcuts in settings).
one thing i wasn't sure about though- well, actually two. first, for the clock. i changed it so it shows a 12 hour clock instead of a 24 hour clock... but there is no AM or PM following the time? is that how it displays on native english roms? second, i've heard some people say that to get rid of the english menus and revert back to japanese, you have to do a hard reset. does this mean that it's safe to uninstall the programs listed in the installed programs list related to the MUI? i'm not a fan of hardresetting, and would like to avoid screwing up my quite functional setup if it's not necessary. but if its just taking up unnecessary space...
tora201 said:
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Click to expand...
Click to collapse
i tried this in WM6 (Hermes) and worked.
try to install enable_rapi.can before this,
and will work(some MUI doesnt in this for WM6, still keep english them)
Asukaly yours!
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
possiblity, 1st deleat Paring device when yors were English Lacation,
and try to sync after Japanese Location(not sure)
also i hard similar bug, and he could fix that with registry tweak.
(no exactly information what registry was tweaked)
Hello Asukal! I come to you again for help!
There are two things that I still have problems with while making English ROM Japanese friendly:
1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
2º)[less important] Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)
Thanks!
PD: After read this thread, I have two small questions (really less important; just curious):
a)LetsJapanNo6.zip: New CAB for make Softbank Hermes from JP to English without flash I suppose, no?
a1)Want does exactly do the Treo version?
b)You translate Softbank mail app to English, but only works in original ROMs because of certificates?
And the last one ... Any advance in MMS after MMS Lite? Last times I only checked WM6 Forum, and I think I lose many news form this forum.
Really thanks for all!!
Asukal said:
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
Click to expand...
Click to collapse
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
:O I had installed Letsjapan 5 and happens the same, and I couldn't connect to msn, with the same error you said.
so I tried, unistall it, and works. Then I just installed Letsjapan6 , and still can connect to windows live MSN
I didn't realize that could be the problem Thanks.
And thanks Asukal for LetsJapan x
sesaru said:
I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
Click to expand...
Click to collapse
No idea about this?
sesaru said:
No idea about this?
Click to expand...
Click to collapse
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
mexec said:
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
Click to expand...
Click to collapse
sorry, i found this, and tested on my device.
not worked,
have to remake this,
PLS wait, but i am so busy this season, can not say when...
Asukal said:
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
Click to expand...
Click to collapse
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Asukal said:
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Click to expand...
Click to collapse
Asukal, I really love you!! I was asking for this many many times, and nobody know it!! (^-^)
There is more thing to make my WM6 perfect, and also one question that maybe you can help me
-I tries many times to make Pockect IE to work with Yahoo! Keitai of softbank but not way. Maybe you know how to do it.
-For MMS, I have MMSLite. I hace flat rate of softbank (1man yen). I'm not sure if MMS Lite use standar Softbank connect, or use any that mabe will charge more money to me (more than that 10.000 yen guari)
Thanks a lot!!!!!!!!!!
Sesaru
i`m living in china so i really need this stuff, I tried for a long time, finaly i found all this application , for those wants to install chinese character and write, here i got all. 朋友们我是老外外中国我用的WM 是英文的但是我常常需要写汉字或者念，所以我要分享我有的软件。这里都有中文字幕，是洪文输入法和手写， 看看 @[email protected]喜欢的话就感谢，呵呵呵
In this pack you will got a chinese caracter suport that can make your phone recognize chinese character, a chinese writer pinyin (by baidu, and other extracted from chinese rom) and we got also a chinese caracter handwriter that also can write english words and others. all of this stuff are working good a windows mobile 6.5 so try them if you like just say thanks and sorry for my bad english
you can come to this link all this files are informat cab http://cid-95ba44d261394b3b.skydrive.live.com/browse.aspx/.Public/Chinese pack?view=details
Does this support traditional chinese?
raidy said:
i`m living in china so i really need this stuff, I tried for a long time, finaly i found all this application , for those wants to install chinese character and write, here i got all. 朋友们我是老外外中国我用的WM 是英文的但是我常常需要写汉字或者念，所以我要分享我有的软件。这里都有中文字幕，是洪文输入法和手写， 看看 @[email protected]喜欢的话就感谢，呵呵呵
In this pack you will got a chinese caracter suport that can make your phone recognize chinese character, a chinese writer pinyin (by baidu, and other extracted from chinese rom) and we got also a chinese caracter handwriter that also can write english words and others. all of this stuff are working good a windows mobile 6.5 so try them if you like just say thanks and sorry for my bad english
you can come to this link all this files are informat cab http://cid-95ba44d261394b3b.skydrive.live.com/browse.aspx/.Public/Chinese pack?view=details
Click to expand...
Click to collapse
My friend, do you really need to input Chinese? This is amazing. I have installed Google Chinese Fonts which is very small but lack of the power to input but I think sufficient.
Here's another post that may be of help...
http://forum.xda-developers.com/showthread.php?t=603551&highlight=chinese
One of the cab file that I've tried is the Baidu's Chinese Input method and it's a great tool for Chinese entry. It's developed by Baidu, a popular Chinese portal site.
Check out our review here: http://bit.ly/8LGf4H
Removing/Uninstall Baidu’s Chinese Input
Sorry to dig this out but...
Does anyone know how to uninstall or remove Baidu’s Chinese Input without the need to hard-reset?
:d我过来支持纯中文支持
I DO LOVE the way the input works. However due to some issue I wish to remove it and KIV first. but I can't find it in the remove program list.
So just checking does anyone have any idea on how to remove it as well as remove the baidu button on the bottom of the screen...
MatrixAce said:
I DO LOVE the way the input works. However due to some issue I wish to remove it and KIV first. but I can't find it in the remove program list.
So just checking does anyone have any idea on how to remove it as well as remove the baidu button on the bottom of the screen...
Click to expand...
Click to collapse
is very easy just go to windows folder and after startup u will delete a file named search and restart is done!
for Baidu Chinese IME, you should go to link:
ishouji.baidu.com/input/download.html
directly to download the version that's suitable for your cellphone model.
It currently support Windows Mobile and Symbian.
(Sorry, the forum does not allow me to post outside link here to prevent SPAM, just copy and paste the link to the browser).
Chinese character help
Hi, (HD2 Newbie) I downloaded and installed all four cabs and the phone soft reset. The problem was when it reset, I got the white tmoblie screen that just hung there forever, even after many soft resets (tmous phone hd2). Should I not have installed all four cabs? Should I have done a soft reset after each install? I don't want to do another hard reset. Help?
raidy said:
i`m living in china so i really need this stuff, I tried for a long time, finaly i found all this application , for those wants to install chinese character and write, here i got all. 朋友们我是老外外中国我用的WM 是英文的但是我常常需要写汉字或者念，所以我要分享我有的软件。这里都有中文字幕，是洪文输入法和手写， 看看 @[email protected]喜欢的话就感谢，呵呵呵
In this pack you will got a chinese caracter suport that can make your phone recognize chinese character, a chinese writer pinyin (by baidu, and other extracted from chinese rom) and we got also a chinese caracter handwriter that also can write english words and others. all of this stuff are working good a windows mobile 6.5 so try them if you like just say thanks and sorry for my bad english
you can come to this link all this files are informat cab [...
Click to expand...
Click to collapse
ni hao !
how to mkae the phone read chinese ?
i have doubts i could not take of reading for HOURS and searching and reading... so here i am to try any good soul to answer me:
1 - how do i use SEUS to verify my firmware?????? Can u explain me pass to pass?
2 - i have froyobread CM6 in my mini pro... Kfix solved the leds problems in HKeyboard, BUT.... i can make it work in my language...
I am Brazilian, my language is Portuguese-BR. I tried to use the Mini Rom Manager to change the hardware keyboard layout but querty-br didn´t work... and it has no other language (i think so...) i can use as i need sym/ä and ç in my language...
can somebofy help me to solve it explaining me a pass to pass?
PLEASE?????????
3 - my virtual keyboard stops when i try to scroll it untill the end using the sym... some tip???
4 - how do i install java in the mini pro?
no answers
ok..... so as i have no answers... i continued trying to get info in the net...
i tried GingerDX, FroyoBread and now i am using CM7Pro for mini pro...
what can i say?????????
well... Froyobread i had no hardware keyboard working in portuguese brazil PT-BR...
i tryed Rom Manager but i got nothing working in the HK
i need to try another tips, but as i am a newbie i waste A LOT OF TIME to understand what to do with the files people post here.
GingerDX it´s awsome but i got no bluetooth working, no HK and no lED light in the HK, and Rom Manager didn´t work in the ROM... i got info about how to make Rom Manager work, but not fully and did not try as my bluetooth didn´t work and i got nothing about how to fix it...
i tried to reinstall the ROM in a fresh base, i tryied to wip it and restart several times... and GingerDX had bug for me in the touch screen and buttons i could not enter the ROM when the LCD turned off. And the Sym/àü key stoped work if i´d scroll it untill the end down. Yes,,, there was tip about how to fix it... but for me had so much problems i tried another ROM
Now i have Cyanogem miniCM7Pro V4. For now the only problem it´s the HK... i am AGAIN trying to find a solution.... everything else it´s working for now... but i need to do more tests.
Some more bugs... please guys.... help!
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
3 - no GPS
4 - no internet connection but the wifi is on !!!!
azhhael said:
In MiniCM7Pro V4 i got bugs:
1 - can´t have HK working in PT-BR yet... any ideas????????? Please!!!!!!!!!
Click to expand...
Click to collapse
Rom manager
2 - when i scroll down the status bar untill the end it can´t be back up, i need to use the back button or i can´t close it
Me too
3 - no GPS
Me too
4 - no internet connection but the wifi is on !!!!
And me too
so........... trying again
well... with so much problems i tried all again... what i am getting now:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know how.... does anybody know how???? Can give me a help????
more doubts..... help again
i am trying to get my old file as tells here:
you can browse an xrecovery file you already have and find the keyprint.xml , or find the keyprint.xml from an other rom you installed in /system/usr/keyboard-config and copy it to the sd card
with root explorer or any file manager that can explore your root
go to /system/usr/keyboard-config delete the existing keyprint.xml and paste the one on sd card
give the right permisions [x] [x] [ ]
____________________ [x] [ ] [ ]
___________________ [x] [ ] [ ]
(remember to mount write before you do anything on system)
reboot your phone
but i can´t cause it tells can´t find the file in CWM
i have ".img" files as backup done when i was with 2.1 android from SE.... i need to get the original HK file to test the tip... but i have no idea about how to get this now...
PLEASE HEEEEEEEEEEEELP
you sir, are a dedicated problem solver
i've added my stock rom keyprint.xml for you, hope that helps you
unzip that to sdcard and then just copy it over to the right system folder using root eplorer and setting the right permissions
---
As for the screen borders getting no touch input, the only cm7 version that wasn't the case with was minicm7-v14,5 by slade.
all other versions suffer from it
The symbol menu crashing when scrolling is a common froyo/gingerbread issue and can partly be solved with a workaround
if you go to cm settings > user interface and enable overscrolling and set it to bounce, the symbols menu in h/w keyboard won't freeze anymore. Except that doesn't work on the symbols menu in soft keyboard.
goodluck!
Hello Anderson... in my last post i told what i did that helped me to get the most problems solved in the ROM.... i´ll repost it here:
i wiped all options in CWM, so i reinstalled GingerDX mini pro (before i had miniCM7Pro V4)...
i rebooted and called for CWM again and applied factory reset again and i rebooted again
i ignored google config e gone to bluetooth, so now IT`S WORKING!!!!!!!!!!
let me see what more...
i can wake up the screen without problems!!!!! UHU
what more...
mmmm same problem with the screen borders...no touch...
now, i just turned on the fix for the HK LED Light and restarted the ROM... waiting.... waiting...OK!!!!!!!!! Working!!!!!!!!!!!
Internet it´s ok....
let me test the GPS... funcionando perfeitamente!!!!!!!!!!
Mini Rom Manager tells: "it´s not compatible with the dispositive" when i try to use HK settings
so used a fix for this problem, now it´s compatible, but the HK setting didn´t solve the problem... so i am trying to get a xml file from an old SE backup 2.1 verson, i am trying to access the xrecovery backup through CWM but i don´t know
any doubt about it ask me, now i learned a lot!!!!!! auehuaehauehuaeh
and if you think i could help... and if the button appears to you, thank me in my post... :-D
cheers
Oh .... thak u so much for you good help, and for the file.
I tried to do all with the file you sent me, but i got no working HK in PT-BR yet....
this post tell what querty file for the correct language in the HK but i didn´t understand how to install the language...
http://forum.xda-developers.com/showthread.php?t=982341
can you help me? Maybe you may know how...
oh god, i think i did something really bad!!!!!!!!!!!
more questions... i found nothing explaning it in the forum... can somebody help?
I am with GingerDX v5 ROM
1 - when i plug my phone to PC, so PC Companion asks for "choose between charging, connecting and etc..." but there is not the option in the phone screen to do it... what do i have to do to connect???
2 - i had sony android 2.1 and i did a backup using xRecovery so i could install another ROM ... so... after that i formated my sdcard... lost all... but before it i did a backup. So i have inside this backup a folder called xRecovery > backup > 2011-08-02.02.29.25 >
nandroid.md5
cache.img
data.img
system.img
so, my question is: "is there a way i can recover my old android 2.1 with this files??? Or did i lost all...???
and... how can i open this "files" so i can get HK files from old 2.1 i had????
I knoe i have a lot of questions, but i can help too... i think so...
hello guys... i am really ansioous for your help about my last questions.
But for now let me tell what i got.
I Unzipped GingerDX v5 and unzipped pt-br files.... so, i copied these files to Ginger ROM and deleted the original ones. So, i zipped GingerDX again.
So, i wiped all in CWM and reinstalled GingerDx using my zip.
No, it´s all working as before, but the difference is that i have my HK almost ok. Now i have the right keys unless for the SYM key i can´t do it working yet.
Please, do u guys have any ideas?
And need the "popup bar" that appears in android 2.1 when u use the HK... that bar where we can change language and see is the we r using the numbers, or "big letters (?)" or "small letters (? oh... sorry for the bad english)".
I saw something about it in the GingerDX v6 thread but i didn´t understood nothing cause they talk to people who knows about the programing... it´s not a pass to pass... so, can some good soul help me about all these problems????
PLEASE....
I´ll attach here the file i used to replace HK files in GingerDX v5... maybe it can help if somebody can have a look at it about the SYM key and the popup bar...
hope u give me a help guys , i have nobody to ask for....
Can anybody help?
Hello XDA guys... i know you r busy guys, and really intelligent ones... cause waw.... i´d really like to know about programming as u.... but well, everybody has a talent and the mine is animation in computer graphics... if i can help you anyway about it... let me know... but
I need help!!!!!!!
please... guys, i believe my problems can help not just me, but more people here as i could see... and
Hi, I kinda solved the sym key by accident and i can't really tell how i did it but actually I just selected the keyboard i needed in mini rom manager and then i went into settings/keyboard and I unchecked all boxes.
After that I rebooted and I checked the boxes back and it worked. It may sound weird but the sym key works on my phone. I'm using paul's rom V4+hotfix.
Hope this will help you.
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
waw... weird...
Carpe-Dimi said:
hey again,
to get the symbol button to work go to settings > select language and keyboard. in there deselect all keyboards (htc ime lo and android keyboard) but the one called "default input" that will give u the stock rom input with t9 in portrait and a symbol button in landscape.
also, to prevet the symbols menu from crashing, go to settings > cyanogenmod > interface, there set overscrolling to bounce back (any intensity)
Click to expand...
Click to collapse
it´s really weird that issue about sym key you did, Chucklechivers. hehehe
But... i am trying to reproduce that "issue" auehaueh.
And Carpe-Dimi...
I just got a little problem, or two:
1 -i use Ginger DX v005 ROM, i installed Mini Rom Manager v.5.2 from Slade but when i try to change the HK layout it tells me it´s not compatible with my device. So i tried to change the build.prop file as people tell here in XDA so MRM should be compatible... ok, that´s working. But when i try to change the language of my HK nothing happens after reboot... no changes. And a lot of features of MRM can´t work properly
2 - when i access the language and keyboard setting to set default input, it doesn´t exist in my ROM... i just have 2 keyboard in the Ginger DX v005: HTC and Android... no other.
About the overscrolling... can i set elastic overscroll and bright? or does it just works only in simple elastic mode?
so... any ideas, guys??? i am still searching for answers... if i thind any... i´ll put it here...
it might be that MRM can't change keyboard cause of the new keyprint.xml file u've used, but I'm not certain about that. and not all functions of MRM work on all phones and roms either.
í've added an apk for the standard input. using root explorer copy that to system/app (on your phone, remember to set r/w) and give it the permissions rw-r--r-- (read+write for owner, just read for the other two)
reboot and u should be able to select default input from the settings menu.
bounce and glow will work as well
OK... So it would seem that the more technology advances, the less control users have on their devices... GRRRRRR!
But before we engage in arguments on the politics of actively hiding the file system to computer users and restricting access to their devices... Does anyone know WHERE Google stores its Offline Speech Recognition Language Files?
I accidentally discovered that Offline Speech Recognition seems to have been bundled with Google Search somehow because if Google Search is disabled, so is Speech Recognition and looking at Google Search in Application Manager, one can notice that the data storage is proportional to the size of the downloaded language files, but so far have been unable to locate where on the device these files are stored, so that they don't need to be downloaded again.
Any ideas?
Old faithful said:
WHERE Google stores its Offline Speech Recognition Language Files?
Click to expand...
Click to collapse
on my 4.1.x / rk30xx based tablet, the files are in:
/data/data/com.google.android.googlequicksearchbox/app_g3_models/ **folders in here with the files downloaded for each language**
dangerzone said:
on my 4.1.x / rk30xx based tablet, the files are in:
/data/data/com.google.android.googlequicksearchbox/app_g3_models/ **folders in here with the files downloaded for each language**
Click to expand...
Click to collapse
YESSS! Confirmed on my Samsung Galxy Note 2
THANK YOU SHERLOCK!!!
For those using OFFLINE voice to text to SAVE BANDWIDTH, having to DOWNLOAD THE FILES every time something Google crashes in order to save you from DOWNLOADING in real time was a bit absurd, don't you think?
This should resolve the issue, unless of course reinstalling the files manually is not possible. I'll make some tests and get back with results.
unable to find language files for offline voice recognition
dangerzone said:
on my 4.1.x / rk30xx based tablet, the files are in:
/data/data/com.google.android.googlequicksearchbox/app_g3_models/ **folders in here with the files downloaded for each language**
Click to expand...
Click to collapse
the above directory is not present on my Nexus4
I just have a \files folder, but it's emty
I have the followind issue:
installed is only English US, and when I try to download ANY other language , download seems to stard, but immedialtelly (less than 1 second) stop, with no erro message
PLEASE HELP
ice.man said:
the above directory is not present on my Nexus4
I just have a \files folder, but it's emty
I have the followind issue:
installed is only English US, and when I try to download ANY other language , download seems to stard, but immedialtelly (less than 1 second) stop, with no erro message
PLEASE HELP
Click to expand...
Click to collapse
Firstly, just in case you were trying to do this on an older OS, it's supposed to work only starting with Jelly Bean (4.1.1), but I presume you wouldn't have an option to download if you were on an old OS...
Otherwise your Google Search installation may be corrupted and you need to delete the data and cache and reboot (note to others: if you need to reinitialize Google Search for any reason and already downloaded language files, COPY THEM ONTO YOUR SDCARD FIRST if you don't want to be downloading them again ).
If that doesn't work, update Google Search offline, there are apks available, I'll post one up tomorrow if you have trouble finding one.
If worse comes to worst, you may have to delete your google account and re-register it after a reboot. Usually that's as far as you need to go.
If you still need language packs after all this, let me know and I'll download them for you as I'll be WiFi all day tomorrow.
Good luck!
Old faithful said:
Firstly, just in case you were trying to do this on an older OS, it's supposed to work only starting with Jelly Bean (4.1.1), but I presume you wouldn't have an option to download if you were on an old OS...
Click to expand...
Click to collapse
I forgot to write I'm on a Nexus4, Andoird 4.2.2, NOT rooted
Otherwise your Google Search installation may be corrupted and you need to delete the data and cache and reboot
Click to expand...
Click to collapse
this was my first option yesterday, but no luck
Unfortunatelly on Android 4.2 both GOOGLE SEARCH and VOICE SEARCH are embedded in Android rom. So I haven't ANY unistall option. I just have the option to uninstall updates (witch I did, hoping the update would have somehow fixed the issue, but again, NO luck)
(note to others: if you need to reinitialize Google Search for any reason and already downloaded language files, COPY THEM ONTO YOUR SDCARD FIRST if you don't want to be downloading them again ).
Click to expand...
Click to collapse
that's a very kind tip from you, but Nexus come with no sd slot, anyway I've wifi both home and work, so I don't mind downloading them back
If that doesn't work, update Google Search offline, there are apks available, I'll post one up tomorrow if you have trouble finding one.
If worse comes to worst, you may have to delete your google account and re-register it after a reboot. Usually that's as far as you need to go.
Click to expand...
Click to collapse
I have 3 accounts configured, (2x google standard account and 1x google app account) so removing them all is the last option....
If you still need language packs after all this, let me know and I'll download them for you as I'll be WiFi all day tomorrow.
Click to expand...
Click to collapse
indeed I'm willing to test wether just manually creating the folder and inflating the language files can meke it work......if you can provide me the ITALIAN language pack. I think I'll wait the Andoid v.5 update for a device wipe/reset
Good luck!
Click to expand...
Click to collapse
I really need it
ice.man said:
I forgot to write I'm on a Nexus4, Andoird 4.2.2, NOT rooted
Click to expand...
Click to collapse
not sure it makes a difference since you're able to navigate there anyway... I'd be surprised if the other folders were hidden...
ice.man said:
Unfortunatelly on Android 4.2 both GOOGLE SEARCH and VOICE SEARCH are embedded in Android rom. So I haven't ANY unistall option. I just have the option to uninstall updates (witch I did, hoping the update would have somehow fixed the issue, but again, NO luck)
Click to expand...
Click to collapse
So I've just backed up the Google Search on my device, 2.0.0.438695.apk, this one works for me, and another one I had on backup 2.3.11.575405.apk, don't remember if it's any better.
I hope it helps, it's probably better than downloading the updates.
ice.man said:
that's a very kind tip from you, but Nexus come with no sd slot, anyway I've wifi both home and work, so I don't mind downloading them back
Click to expand...
Click to collapse
As I understand it, reinitializing the phone won't erase the internal SDCard, it's like a separate partition.
ice.man said:
if you can provide me the ITALIAN language pack.
Click to expand...
Click to collapse
Here you go, it's a zip file, unzip with stored folders, it should create the folder it-IT with several files, put it all into /data/data/com.google.android.googlequicksearchbox/app_g3_models/
Hope it helps!
Here you go, it's a zip file, unzip with stored folders, it should create the folder it-IT with several files, put it all into /data/data/com.google.android.googlequicksearchbox/app_g3_models/
Hope it helps!
Click to expand...
Click to collapse
IT WORKED
THANKS A LOT
.
I downloaded all the needed file (both .apk and language files)
but I started creating the /app_g3_models/ folder and then inlating the IT-it language pack you provided
Than I checked if the language file was listed as installed in the offline voice recognition menu, but yet it wasn't
BUT when I clicked on download....it started downloading it back, and then it appeared in the installed language for offline use
of course my second test was....can I download any other language now or for the time being I'll always need to have it manuallly copied on the mobile and THEN I'll be able to "download" it.........
quess what? I was able to download Englis (UK) and German
so definitilelly the issue seems to be solved
And I did not even had to use the .apk files
thanks again
ice.man said:
IT WORKED
THANKS A LOT
.
I downloaded all the needed file (both .apk and language files)
but I started creating the /app_g3_models/ folder and then inlating the IT-it language pack you provided
Than I checked if the language file was listed as installed in the offline voice recognition menu, but yet it wasn't
BUT when I clicked on download....it started downloading it back, and then it appeared in the installed language for offline use
of course my second test was....can I download any other language now or for the time being I'll always need to have it manuallly copied on the mobile and THEN I'll be able to "download" it.........
quess what? I was able to download Englis (UK) and German
so definitilelly the issue seems to be solved
And I did not even had to use the .apk files
thanks again
Click to expand...
Click to collapse
Glad I could help, buona Pasqua
Old faithful said:
Glad I could help, buona Pasqua
Click to expand...
Click to collapse
Hello there. I'm using Jb 4.2.2 ROM by Vijendrah on my HTC Desire.. But not able to activate Offline Speech to Text .
I don't hav that folder in data/data also. Can u help me with this sir?
I solved the issue like this:
manually created the folders
copied the language files from Old faithful
then rebooted, tryed to download a new language and it worked
try tha same and let me know
ice.man said:
I solved the issue like this:
manually created the folders
co. ed the language files from Old faithful
then rebooted, tryed to download a new language and it worked
try tha same and let me know
Click to expand...
Click to collapse
Ohk.. U created those folders- com.google.android.googlequicksearchbox/app_g3_models/
N also downloaded that Google search .apk.. Now what should I do?
Bcoz I already hav Google search installed rite now..so should I uninstall that? Or how should I proceed..
Edit I don't speak Italian so did not download that other file..
I don't speak German either, but I downloaded the laguage file to test the "download" function was working within the Offline Voice features
I mean, somehow the fact google voice offline realized there was 1 language file in the folder....un-locked the donwload new language file function
ice.man said:
I don't speak German either, but I downloaded the laguage file test the "download" function was working within the Offline Voice features
I mean, somehow the fact google voice offline realized there was 1 language file in the folder....un-locked the donwload new language file functio
Ohh I see.. Ohk I'm downloading now.. So once I download that I should those files in - app_g3_modelso . and after that from where should I update files?
Click to expand...
Click to collapse
Helped a lot......
Worked?
I have a rooted Huawei Y300 with stock ROM, JB 4.1.1. The option to download the offline recognition files isn't there, but I'm quite sure that back when I bought the phone early April, the option was still there. I couldn't find anything definitive, but it seems that Google has disabled the offline recognition for devices it deems "too slow/weak" to use that functionality. Or something.
In any case, the app_g3_models folder exists on my phone, but it's empty. If I set the language to English (US), the offline recognition works, if I set it to English (UK) or German or whatever, I get a speech server error if I'm offline (I use utter!). So I downloaded the Italian files linked earlier in this thread and copied them to the app_g3_models folder. Then I set the Voice Search language to Italian, tried utter! and it worked while offline. The only "problem" being that it understands the speech as English, not Italian... I don't actually speak Italian but I set utter! to display the results it gets back from the Google speech recognition service, and those results are in English. And if I ask it "What time is it?", it understands me correctly. I assume the problem is that the speech recognition sees the Italian offline files, but for whatever reason it can't use them and defaults to the working English (US) files (where are THOSE, anyway?). If I set the Voice Search language to anything but Italian or English (US), I get the speech server error again.
So here's my request - could someone please download the English (US), English (UK), German and Russian offline files on his phone and upload them somewhere for me to try?
Also if you know how I can get the download option to show on my phone, that would be even better .
A big +1 to that. I downloaded the Italian files myself and got my phone sounding like Mussolini. Lol..Still if somebody could upload the English US file it'd be great. I'm gonna keep looking for them. If I find them I'll post a link for y'all here.
Sorry guys, I'm stupid I suspect.
I've downloaded the files to app_g3_models.
When I select Voice Search, I see:
Language
Default - English (UK)
Speech output
Only when informative
Block offensive words
Hide recognised offensive voice results
Bluetooth headset
Records audio through Bluetooth headset if available.
there is nothing else. So what do I need to do next, to get offline voice recognition working?
gbossley said:
Sorry guys, I'm stupid I suspect.
I've downloaded the files to app_g3_models.
When I select Voice Search, I see:
Language
Default - English (UK)
Speech output
Only when informative
Block offensive words
Hide recognised offensive voice results
Bluetooth headset
Records audio through Bluetooth headset if available.
there is nothing else. So what do I need to do next, to get offline voice recognition working?
Click to expand...
Click to collapse
I had this same issue with another app that uses Google offline recognition files. (Utter) Spent days trying to figure it out. What did the trick was installing svox voice engine, and a trial of a voice pack (it seemed that it wouldn't work without the voice package) once I set that up the offline stuff started working.
Hope it helps ya