Hello... Everyone there,
I had a problem here, need help.
I upgrade my dopod 838pro to Window Mobile 6.5.3, after upgrade it keep stuck on start up and just show start up screen, cannot turn on. I had try soft reset and hard reset still the same. Now the device cannot connect with ACTIVE-SYNC, then I cannot flash another ROM. Any Solution ?
I was having the same problem when i installed the WM6.5 titanium. Just hard reset it and wait a little lobger.
Try flashing with another ROM guys..
Related
Hello All,
Something freaky just happend. I was reading a thread about how someone was unable to access his Bootloader after a WM 2003 install and decided to go into Bootloader mode. No problems there, so I did a soft reset to get out of Bootloader mode and Boom! 'Tap here to set up your device' displayed amid the 'Bliss' background.
I had to setup the device from scratch. Luckily not all that much loss of software and I only lost one appointment which I still remember. Can you guys with WM 2003 try it and let me know your results? Please backup your data first!
Thanks
Yep same thing here! i tried it fater upgrading and its just like i did a hard reset...
:?
Same here! :shock:
BTW I'm using a US T-Mobile PPCPE.
Please any one come across Error 101:Connection Error in HimaUpgradeUt.exe ? I was using Tmobile 1.72 beta and trying to upgrade to imate 1.72 Official, the upgrade program started, and hang at 40%, forced to reset, and my O2 hang at O2 Splash screen.
I tried hard-reset, and still hang at O2 Splash screen, and when I try to reinstall/upgrade/download, the upgrade program prompt me this error 101:connection error, any one have this before.
Please help, thanks
Reset your device into bootloader (arrow any direction + power + soft reset)
Disable any firewall you may have on your PC (I have had problems with ZoneAlarm)
Restart the upgrade program
I had a problem with Zone Alarm as well. I didn't need to hard reset, though.
Hi guys, thanks for your speedy reply. My friend do not have the patience to wait, so have send to service centre in Singapore and they have help him to solved the problems and with O2 1.66 ROM (FOC)
Thanks guys, you are great, and great forum
hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung
I got a dopod 838 pro of a friend with wm5 and upgraded it to wm6. This worked fine but i wasn't happy with the way it was behaving so I downloaded a original rom from dopod asia. When I flashed it it completley it **** itself at radio flashing. It now boots and gets stuck on the windows mobile screen and won't do anything, i've tried tapping the screen, pushing every button and hard reset a few times. Could someone please help me, I used this thing every day before it bricked.
If you have Hard sPLed your phone to SPl 2.10 olipro, I'd suggest trying to flash a stock rom with the sd card to see if you can restore your radio rom. You may have corrupted it and it may never work as a phone again. I'd still try the stock rom then reflash what you want if it works... You can find the instructions for sd card flashing on the wiki with a quick search...
Hope this helps... Cheers