i have 2x cradles from t-mobile but i dont have simple charger for 220v without computer charging, so i if is possible to put out from one cradle
BA jack for charging and that usb small cable so i can conect it with my usb to AC adapter, i need it because is hard to typing with stylus while charging vertically and after transforming i am able to put i horizontally .
did anyone tried
because I have not a regular screwdriver, I have to break the CRADLE. Will I be able to pull out USB cable after breaking the cradle
fpopic said:
because I have not a regular screwdriver, I have to break the CRADLE. Will I be able to pull out USB cable after breaking the cradle
Click to expand...
Click to collapse
I've opened my craddle to see what's inside.
As I remember there was some small circuit board on cable, so theoreticaly you could use it as USB cable, but it won't look nice.
DO NOT break the craddle, it's very easy to open. Try to find screwdriver (don't have to be original).
Hope this helps!
PS. As I've read somewhere Sony PSP charger is compatible with BlueAngel, so try to find it.
Those cables are quite cheap, for me its a pity to break the cradle for the cable...
http://www.pdahut.com/store/product.php?productid=17234
you can purchese those from an Ebay
good luck
igord2 said:
Those cables are quite cheap, for me its a pity to break the cradle for the cable...
http://www.pdahut.com/store/product.php?productid=17234
you can purchese those from an Ebay
good luck
Click to expand...
Click to collapse
i know it is cheap
but i am 16. and i cant have ebay. (si ti mozda iz zagreba)
im unsure as to what cradle you're using, but ive disassembled a wallaby cradle thats the same connection as the blueangel. popped right out, not exactly pretty but its still my main usb cord.
so yes, it's doable.
As he says . . . . .
aleksicveljko said:
I've opened my craddle to see what's inside.
As I remember there was some small circuit board on cable, so theoreticaly you could use it as USB cable, but it won't look nice.
DO NOT break the craddle, it's very easy to open. Try to find screwdriver (don't have to be original).
Hope this helps!
PS. As I've read somewhere Sony PSP charger is compatible with BlueAngel, so try to find it.
Click to expand...
Click to collapse
As he says . . . .
Related
Trying to find out if there is such a thing as going from extmicro usb that the evo and flyer have to a usb type A (or any other normal usb).
Need a right angle to plug into tablet for car install and found that I can fit a microb angled cable into the tablet, but now need to take the car charges extusb and get an adapter to hook it all together.
You can just buy a regular micro USB extended cable. It fits in the flyer/view charge port.
Proprietary cable is the one on the right. Regular micro USB on left.
I am installing the tablet in dash of a car.
I have the oem car charger because its only one with right voltage. But I need a angled usb for clearance issues. So im trying to figure a way to go from the charger EXTMICRO usb to the angled usb.
Searched around and have come up completely empty.
I'm working on the same project and found this thread searching (again) for more info on extusb. The solution I came up with for getting enough clearance to use the port requires disassembly and if you plan on keeping the warranty, it's probably not a good option for you.
Anyway, my solution was to make some small right-angle brackets for the pcb that contains the extusb port. It requires material for the angle brackets and two small screws with nuts. See attached for a better idea.
I actually got the tablet installed and fairly well, but have since removed it to come up with better designs for charging, access to the power button (and possibly volume buttons) for recovery actions, turning the screen on/off with ignition, and potentially microphone relocation.
You may want to check out http://www.dealextreme.com/ for right-angle and other adapters if you don't want to open up the tablet.
PS: Protect that screen. The plastic is very soft and will easily scratch.
I don't follow.
I thought the HTC car charger was a plug with a USB port in it just like all the others. I thought this might help, but I probably have no idea what you're really looking for
http://www.amazon.com/Cables-Go-Right-Angled-Micro/dp/B005EV2LAM
If you *need* to use the 12pin micro usb that the view has (which from my understanding was only there for the docking station utility), then you might be out of luck unless you can build something yourself.
Im looking for a cable like you linked to, but then I need a way to connect the flyers car charger special usb tip into it. Only way I can think of is to carefully grind the corners so that it will fit into a micro B female connection.
But the chargers are not cheap and if I F*** it up Im out $30
On a kia soul forum where others are planning on doing the same install with the flyer, one guy has come accross a company that makes custom cables. He said that if We send the car charger to them they will replace the usb tip with a micro B 90 degree angle for $25.
So A person is sending the charger to them to have it done and is going to let us know how it comes out.
jacobbones, can you provide a link to the kia soul flyer thread?
Yes, here it is.
http://www.soulhamsters.com/forum/i...ale-again-24feb-7-android-tablet-199-shipped/
Talk about the custom job is near the end of the posts
opening up the car charger and replacing the cable is incredibly simple. I have done it so many times, I can probably do it blindfolded. I actually had to go and replace the OEM chargers cable with the USB cable that it came with because my damn dog chewed threw the charger cable. Didn't come back very pretty, but it works, that charger has got the be the best charger built I have ever seen, incredibly difficult to open, but I'm sure the car charger is a lot easier to open, you just need a soldering gun and it should be easy.
Sent from my ADR6425LVW using xda premium
hello
i need something like that to provide it for my nook but his power from charging not a batteries , anyone know a device like that .... this "lyra light" will cost much in battery replace ....
thx
also i need to know which cables is support Nook Host mode for play Music (how about MIni OTG):
http://egypt.souq.com/eg-en/mini-us...-و-الكي-بورد-و-3g-usb-على-التابليت-4913821/i/
http://egypt.souq.com/eg-en/usb-on-the-go-host-for-galaxy-s3-i9300-4512293/i/
http://egypt.souq.com/eg-en/micro-otg-small-4935141/i/
http://egypt.souq.com/eg-en/micro-otg-small-4919687/i/
http://egypt.souq.com/eg-en/micro-usb-otg-host-cable-for-samsung-and-htc-3995639/i/
http://egypt.souq.com/eg-en/otg-cable-4715796/i/
No, the "mini" has a mini USB plug, you want micro.
Anything that has a micro USB plug and the magic word "OTG" will work.
If you've got a spare non-OTG adapter cable to kill, have some time and dexterity,
you can even make one yourself by taking the connector apart and grounding the ID pin.
Renate NST said:
No, the "mini" has a mini USB plug, you want micro.
Anything that has a micro USB plug and the magic word "OTG" will work.
If you've got a spare non-OTG adapter cable to kill, have some time and dexterity,
you can even make one yourself by taking the connector apart and grounding the ID pin.
Click to expand...
Click to collapse
i just want bought this item from Egyptian online store ......cuz if i bought anything from ebay will cost me too much due to shipment costs ........... and if i wanna make one myself ...... i havv s3 usb cable ......can u provide ne clear steps????
and for the clip led light for read ..... i found an item on ebay satisfy my needs but it's designed for kindle ......have a look here
http://www.ebay.com/itm/Tuff-Luv-Br...es_Covers_Keyboard_Folios&hash=item5898de600f
thx
Sent from my NOOK using xda app-developers app
I was thinking about getting a magnetic cable because I want to spare usb seal from wearing out. I noticed that some of the people are having problems with it and they managed to brick their phones by plugging the cable in wrong direction. I checked few of cables available in stores and I noticed that they are not marked in any way and there's no information about "how to plug it in". I'm wondering if there's some kind of rule how to plug them in. Is anyone using them instead of Sony dock?
shadovraven said:
I was thinking about getting a magnetic cable because I want to spare usb seal from wearing out. I noticed that some of the people are having problems with it and they managed to brick their phones by plugging the cable in wrong direction. I checked few of cables available in stores and I noticed that they are not marked in any way and there's no information about "how to plug it in". I'm wondering if there's some kind of rule how to plug them in. Is anyone using them instead of Sony dock?
Click to expand...
Click to collapse
I'm using it for some months now, and I can say that if you're using the original Sony cable, you're pretty safe.
If you look at your mobile carefully you'll see that the magnetic frame for the connector has two pins with different geometric forms. Those pins fit exactly on the holes on the cable, in only one direction. You'd have apply a big force to make a mistake.
Besides this, the cable "head" is not symmetrical: one side has a wire, another doesn't. So if you plug the connector with the wire aligned with the "foot" of your mobile three or four times, I think you'll find it too strange to plug it with the wire aligned to the "top" of your mobile.
The experience with the Sony cable is great, and I don't have enough good words to recommend it.
I haven't noticed that connector pins are not symmetrical, thanks for pointing that out. This will definitely help. I'm wondering how people managed to brick their phones by plugging it in wrong direction, if you need to apply some of the force to plug it that way.
I'm thinking about cable because dock costs a lot, considering that I'd use it only for charging anyway. What's the code for magnetic cable from Sony? I might try go grab these here.
I plugged it upside down once. It rebooted the phone. That was it. Nothing bad happened.
Hey guys!
I was thinking about geting a magnetic cable for my OP5, they seem greate for beeyng very practical to use and in theory helping to expand the device's usb port life.
So with that in mind, does anyone have any ideia if...
1- Is there a 4A magnetic usb C cable compatible with dash/vooc?
and
2 - is there any chance that using a magnetic cable would cause damage to the phone?
Nope no dash charge just slow/about 1A. Don't think slow charging would kill your phone. I use em all the time and have had no problems this far.
Same here, I have a micro-usb magnetic connector for my smartach and another magnetic type-c for a tablet and both can't deliver more than 1A , but they are indeed very handy !
Hey guys just found a 4.3A cable, the problem is that its made for notebooks which means the connector is L shaped.
here is where to buy: https://www.banggood.com/Baseus-Magnetic-90-Degree-4_3A-Type-C-to-Type-C-Fast-Charge-Data-Cable-1_5M-for-S8-Xiaomi-6-Macbook-p-1179421.html
and the kickstarter page:https://www.kickstarter.com/projects/1234664819/baseus-worlds-fastest-magnetic-usb-type-c-cable/
edfx said:
Hey guys just found a 4.3A cable, the problem is that its made for notebooks which means the connector is L shaped.
here is where to buy: https://www.banggood.com/Baseus-Magnetic-90-Degree-4_3A-Type-C-to-Type-C-Fast-Charge-Data-Cable-1_5M-for-S8-Xiaomi-6-Macbook-p-1179421.html
and the kickstarter page:https://www.kickstarter.com/projects/1234664819/baseus-worlds-fastest-magnetic-usb-type-c-cable/
Click to expand...
Click to collapse
Hmm i says that it can support S8 too.
Only problem i see is that the USB C charge part needs to stay in the phone, and the other part is magnetic.
Not really convenient i think..
edfx said:
Hey guys just found a 4.3A cable, the problem is that its made for notebooks which means the connector is L shaped.
here is where to buy: https://www.banggood.com/Baseus-Magnetic-90-Degree-4_3A-Type-C-to-Type-C-Fast-Charge-Data-Cable-1_5M-for-S8-Xiaomi-6-Macbook-p-1179421.html
and the kickstarter page:https://www.kickstarter.com/projects/1234664819/baseus-worlds-fastest-magnetic-usb-type-c-cable/
Click to expand...
Click to collapse
It won't work with Dash Charge anyway.. You need their cable with their charger otherwise it won't work,I haven't seen any 3rd party accessories that supports Dash Charge
roba93 said:
Hmm i says that it can support S8 too.
Only problem i see is that the USB C charge part needs to stay in the phone, and the other part is magnetic.
Not really convenient i think..
Click to expand...
Click to collapse
That's kind of the whole idea that makes it convenient, not having to plug the cable. But yeah you do have to always use a case to cover it.
NightMean said:
It won't work with Dash Charge anyway.. You need their cable with their charger otherwise it won't work,I haven't seen any 3rd party accessories that supports Dash Charge
Click to expand...
Click to collapse
Ok the Charger i get but the cable, are you sure?
Is there something else about the OP stock cable besisdes the amount of juice that it can put thru? (considering that that ports a usb-c on one end and usb on the other)
I always thought that there wasn't any other cable compatible because before apple put a usb-c charging/data port on macbook there was no market for a 4A cable apart from Oppo and Oneplus.
edfx said:
Ok the Charger i get but the cable, are you sure?
Is there something else about the OP stock cable besisdes the amount of juice that it can put thru? (considering that that ports a usb-c on one end and usb on the other)
I always thought that there wasn't any other cable compatible because before apple put a usb-c charging/data port on macbook there was no market for a 4A cable apart from Oppo and Oneplus.
Click to expand...
Click to collapse
Yes I'm sure,there is a ton of sites that explains Dash Charge. I Think they put some microchip inside so OP phones can check the compatibility and allow the 4A charge
Edit: There is some article that states that you need their cable
Does anyone know where I can buy something like this, except for usb c?
http://www.ebay.com/itm/like/112306...D711-117182-37290-0%26rvr_id%3D1289648401373&
I do NOT want the entire cable. I just want an adapter so I can use my existing cables.
Never mind, just saw the kick starter. But I only need charging.
NightMean said:
Yes I'm sure,there is a ton of sites that explains Dash Charge. I Think they put some microchip inside so OP phones can check the compatibility and allow the 4A charge
Edit: There is some article that states that you need their cable
Click to expand...
Click to collapse
Quoting the part of the article that talks about the cable "they won’t be compatible with the high current that’s supplied to the device".
So if the current is the only reason... than i believe it could be compatible sense it hits the 4A spot.
Compatible or not the seller/manufaturer will only ship the cable once it hits 200 pcs sold mark, which is pretty far from the current 42 pre-orders. That's too bad i was actualy willing to buy and test it if it wasn't for this.
Any news regarding this?
Sent from my ONEPLUS A3010 using XDA Labs
Necro-Reply....but has anyone tried this. Seems to be an Adapter for Magnetic connection. So what if we used this along with the Dash Charger and Cable?
VOLTA Magnetic Adapter
https://voltacharger.com/collection...ts/volta-adapter-2-tips?variant=8137907437656
It will not work, they have it somewhere on their website
hi guys
when i plug in the charging cable to my s9+, the cable can go a bit up and down inside the port
is it the same on your devices? is this normal? if yes, how much movement is considered acceptable? my phone is charging normally and the movement doesn't seem to affect it in any way
i mean, it cannot fit super-tight and not move at all, right?
there isn't any dirt/lint inside the port since the phone is only one month old
any reply is appreciated!
Same here. But sometimes the phone would not detect the cable. However, I'm using cheap Chinese cables. Worst case scenario, at least we have wireless charging
blckb3ard said:
Same here. But sometimes the phone would not detect the cable. However, I'm using cheap Chinese cables. Worst case scenario, at least we have wireless charging
Click to expand...
Click to collapse
why aren't you using the cable that came with the phone? did it break or something? is it working normally when you use the original cable?
how much of a force is needed to make the usb port wiggle when you drop it while plugged in?