hi guys
when i plug in the charging cable to my s9+, the cable can go a bit up and down inside the port
is it the same on your devices? is this normal? if yes, how much movement is considered acceptable? my phone is charging normally and the movement doesn't seem to affect it in any way
i mean, it cannot fit super-tight and not move at all, right?
there isn't any dirt/lint inside the port since the phone is only one month old
any reply is appreciated!
Same here. But sometimes the phone would not detect the cable. However, I'm using cheap Chinese cables. Worst case scenario, at least we have wireless charging
blckb3ard said:
Same here. But sometimes the phone would not detect the cable. However, I'm using cheap Chinese cables. Worst case scenario, at least we have wireless charging
Click to expand...
Click to collapse
why aren't you using the cable that came with the phone? did it break or something? is it working normally when you use the original cable?
how much of a force is needed to make the usb port wiggle when you drop it while plugged in?
Related
So I was charging my phone and using it at the same time...and the charger doesnt stay in. its so loose....anyone else have this problem?
When my wife and I first got our Captivates her connection was really loose and would fall out. It turned out to be the plug itself, so maybe you can take it back to where you bought it from and ask for a new one.
This is my third Samsung android phone (captivate and nexus s), and it seems to be a common issue. I think its the cable though, as an HTC cable is nice and snug.
Sent from my ATT GS2
Have you tried plugging in another cable yet? Micro USB is a pretty common cable these days.
No problems with loose connections here.
In MicroUSB, the springs are moved from the device to the cable - so try another cable.
Hi All,
I ended up purchasing the Rezond based on the previous feedback, but I'm still in the test-drive phase. I'm really enjoying the phone so far and so far I'm thinking "keep". The included headphones are really great also compared to my previous headphones! I'll be waiting at least another week before I decide to keep the phone and decide to put a better ROM on the phone.
Anyway, what's the deal with the charge cable? Standard Micro-USB fits fine, but what's up with the funky cable that came with the device? Will this cause any problems using a longer standard cable or will it cause the phone to charge slower? Does this cable need to be used for proper connection to a PC?
Custom cables always make me leery.
Sorry if this has been asked, searching for custom usb, charge cable, custom cable did not return an results.
Its actually not a custom cable. It is a MHL adapter. Lots of talk about it in the Accessories forum.
Basically one port for charging and HDMI out instead of two separate ports.
You can charge fine with a regular micro usb cable, I don't think it's slower but I've never timed it.
If you want to get more like the ones that came with the phone you can get the HTC Flyer cables in white here:
http://www.expansys-usa.com/htc-flyer-data-cable-dc-t500-extmicro-usb-12pin-white-209995/
I bought two of them since I like the secure feeling of the snap in.
I've never tried using a regular micro usb for data and don't have one within arm's reach and I'm really super comfy right now so I'm not going to get up but I don't see why it wouldn't work.
In the accessories forum try searching "mhl cable" and I think you'll come up with two threads about it if you want further info.
I am using a blackberry (micro USB) cable at work, and the OEM cable at home, I see no different in charge time or PC connectivity between the 2 cable.
I also use a blackberry AC adapter to charge the rezound when I am in a pinch.
HTH.
Thanks.
I figured any standard micro-usb cable will work. A MHL cable makes sense though, I've just never actually seen one and I'm not familiar with the form factor.
I'll be looking into this, thank you again.
"MHL" A Lot More Solid
The MHL cable feels a lot more solid than a micro USB. I have a couple micro usb that have gotten loose, and now just fall out of the phone if turned over, or if I hit a bump in the car. Thanks for finding a source to buy more of the MHL cables.
Also here slightly less expensive.
http://www.amazon.com/HTC-Flyer-Data-Sync-Cable/dp/B004VF616C/ref=sr_1_2?s=electronics
krelvinaz said:
Also here slightly less expensive.
http://www.amazon.com/HTC-Flyer-Data-Sync-Cable/dp/B004VF616C/ref=sr_1_2?s=electronics
Click to expand...
Click to collapse
How long are those cables? Doesn't say on the page; unless I'm blind.
There is no such thing as an "MHL cable".
The format of the port and cable that come with the Rezound is called "EXTMicro USB".
"MHL" refers to a standard for connecting small electronics to HDTVs. It works with a regular Micro USB cable. Last time I checked (a couple of weeks ago) there are no MHL adapters that utilize EXTMicro USB connectors. Most of the ones that I've found use a regular Micro USB connector.
At this time, it's unclear exactly what the extra 7 pins in the connector in this phone are for. Other HTC phones have used them for analog audio and video output, but this doesn't appear to be supported by the rezound.
If you look at your rezound, you will see it only has the 5 pins. It does utilize the ExtMicro USB plug end/shape. If it truly had the ExtMico USB then while using the mhl adapter it could charge your phone via A/C while streaming. But it can't because the data pins are being used/ there are only 5 pins.
Sent from my ADR6425LVW using xda premium
That's an excellent point about charging while using an MHL adapter. One could still force fast charging through software, such as what's available in Incredikernel/control, though.
On my rezound, I most definitely have contacts in the extra spots. The cable my phone came with, however, doesn't have any pins for them to contact.
Prefader said:
That's an excellent point about charging while using an MHL adapter. One could still force fast charging through software, such as what's available in Incredikernel/control, though.
On my rezound, I most definitely have contacts in the extra spots. The cable my phone came with, however, doesn't have any pins for them to contact.
Click to expand...
Click to collapse
You are right the phone has it, the does not cable. That is my mistake. I knew one of them didn't just was too lazy to check.
Sent from my ADR6425LVW using xda premium
I'm quite disappointed, I only got this Tablet on Friday and realise that it will no longer charge unless I hold the cable down when it is plugged into it (computer also won't recognise it until I hold the cable down). The charging port is extremely loose. I have contacted the sellers so will wait to see what they have to say :crying:
Has anyone else experienced issues with the micro USB port?
Swatto86 said:
I'm quite disappointed, I only got this Tablet on Friday and realise that it will no longer charge unless I hold the cable down when it is plugged into it (computer also won't recognise it until I hold the cable down). The charging port is extremely loose. I have contacted the sellers so will wait to see what they have to say :crying:
Has anyone else experienced issues with the micro USB port?
Click to expand...
Click to collapse
In my case i've found that the microusb is not that strong but i don't have that problem you mention. I recommend you to return the tablet a get a new one.
Swatto86 said:
I'm quite disappointed, I only got this Tablet on Friday and realise that it will no longer charge unless I hold the cable down when it is plugged into it (computer also won't recognise it until I hold the cable down). The charging port is extremely loose. I have contacted the sellers so will wait to see what they have to say :crying:
Has anyone else experienced issues with the micro USB port?
Click to expand...
Click to collapse
I haven't experienced any problems with charging my XTZ yet, but i have noticed that since i bought it the Micro USB cable seems to move around a lot (a lot of slack) while in the charging port.
On other devices micro usb port has got trapezoid like shape but in sony Z products(phone and tablet) port is rectangular which in my opinion is causing loosness of the cable. I have some slack there as well but it is not causing any problems. I guess it is a design problem and only thing we can do, is to be careful and do not wiggle it too much
Sent from my SGP311 using XDA Premium HD app
I tried an HTC charging cable in my XTZ the other day and i had to at least mention it on here, but it seems to have a lot less wiggle room than the sony charger cable does :/
Firstly, whats the correct term? Is it a magnetic port/plug/connector????
Anyway Main question: What can it do?
Can it be used for connection to laptop for file transfers etc????
If yes to that, what about MHL (think thats right, the micro usb - hdmi)?
Just wanna keep them little doors shut at all times, if it cant do data then that doors gonna get opened a lot and probably damaged rather quickly
numskull said:
Firstly, whats the correct term? Is it a magnetic port/plug/connector????
Anyway Main question: What can it do?
Can it be used for connection to laptop for file transfers etc????
If yes to that, what about MHL (think thats right, the micro usb - hdmi)?
Just wanna keep them little doors shut at all times, if it cant do data then that doors gonna get opened a lot and probably damaged rather quickly
Click to expand...
Click to collapse
It connects to the magnetic dock. Yup, you can do file transfer between laptop and phone WITH the dock.
There's also a wi-fi dock by Sony, with which your phone charges and you can also transfer files via wifi while doing so.
KyleSforza said:
It connects to the magnetic dock. Yup, you can do file transfer between laptop and phone WITH the dock.
There's also a wi-fi dock by Sony, with which your phone charges and you can also transfer files via wifi while doing so.
Click to expand...
Click to collapse
Pretty sure the Magnetic Dock only charges the phone.. To make use of the magnetic charging port on the phone, you can either get Sony's official DK36 magnetic charging dock, or you can get an after market magnetic charging cable... But you can never transfer data out of the magnetic port - it can only be used for charging.
The only way to get data from a physical cable out of the phone is via the microUSB port on the phone which is covered by the big flap. This will also charge the phone at the same time.
invision1 said:
Pretty sure the Magnetic Dock only charges the phone.. To make use of the magnetic charging port on the phone, you can either get Sony's official DK36 magnetic charging dock, or you can get an after market magnetic charging cable... But you can never transfer data out of the magnetic port - it can only be used for charging.
The only way to get data from a physical cable out of the phone is via the microUSB port on the phone which is covered by the big flap. This will also charge the phone at the same time.
Click to expand...
Click to collapse
That leads me to the question (just curious): Can you connect the micro USB and the magnetic charging port at the same time?
illphone said:
That leads me to the question (just curious): Can you connect the micro USB and the magnetic charging port at the same time?
Click to expand...
Click to collapse
I'm not too sure on that one. I suppose if you wanted to charge the phone as fast as possible by using the dock and you wanted to do file transfers at the same time by using the USB port.
But i'm not too sure what would happen if you use both the magnetic port and the microUSB port on the phone at the same time.. You'd certainly hope that the phone wont explode.. I can only assume the phone will only let one one source [ie: the Micro USB port or the Magnetic Port] charge the battery at any given time. But i have no idea : )
cheers guys, thats a shame. i suppose it will help with the lifespan of the doors but woulda been a hell of a lot more use if it could transfer data...... oh well lets hope sony have that sorted by the time the z6 comes out (at the rate of one every 6 months thatll be my upgrade in 2 years) or that in that time they manage to make an open waterproof micro usb socket
numskull said:
cheers guys, thats a shame. i suppose it will help with the lifespan of the doors but woulda been a hell of a lot more use if it could transfer data...... oh well lets hope sony have that sorted by the time the z6 comes out (at the rate of one every 6 months thatll be my upgrade in 2 years) or that in that time they manage to make an open waterproof micro usb socket
Click to expand...
Click to collapse
You can check out wireless (WiFi) transfer apps. I know AirDroid is a popular one:
https://play.google.com/store/apps/details?id=com.sand.airdroid
It has pretty amazing capabilities. Maybe it will be good enough for you so you won't even have to use the USB cable very often...
JMonkeYJ said:
You can check out wireless (WiFi) transfer apps. I know AirDroid is a popular one:
https://play.google.com/store/apps/details?id=com.sand.airdroid
It has pretty amazing capabilities. Maybe it will be good enough for you so you won't even have to use the USB cable very often...
Click to expand...
Click to collapse
i suppose thats an option, i tried them before on my note, but they werent that good, took forever..... maybe theyve improved somewhat by now
Hi All,
I recently purchased a Magnetic Charging cable for my Xperia ZU, but the moment I connect it through either Laptop or original sony charger, the phone re-boots. It does charge the phone, but at some particular orientation of magnetic side connection, phone resets.
Anyone else having same issue ? Any solution ?
Thanks
gurung_vishwas1 said:
Hi All,
I recently purchased a Magnetic Charging cable for my Xperia ZU, but the moment I connect it through either Laptop or original sony charger, the phone re-boots. It does charge the phone, but at some particular orientation of magnetic side connection, phone resets.
Anyone else having same issue ? Any solution ?
Thanks
Click to expand...
Click to collapse
I've read it somewhere that charging the phone the upside down could brick the phone.. reset was the symptom. I have sony magnetic charger and it will not allow me to plug in the other side around. The most i get is the touch screen is not that sensitive after plugging the charger and it will refresh my current running app/game. Been using it ever since i got my device and so far no problem.
Reading Materials
http://forum.xda-developers.com/xperia-z-ultra/help/damage-to-z-ultra-magnetic-charger-t2806392
http://forum.xda-developers.com/xpe...e-properly-t2987557/post57830429#post57830429
http://forum.xda-developers.com/xperia-z-ultra/help/newbie-guide-t2959447/post57719084#post57719084
wtfhax said:
I've read it somewhere that charging the phone the upside down could brick the phone.. reset was the symptom. I have sony magnetic charger and it will not allow me to plug in the other side around. The most i get is the touch screen is not that sensitive after plugging the charger and it will refresh my current running app/game. Been using it ever since i got my device and so far no problem.
Reading Materials
http://forum.xda-developers.com/xperia-z-ultra/help/damage-to-z-ultra-magnetic-charger-t2806392
http://forum.xda-developers.com/xpe...e-properly-t2987557/post57830429#post57830429
http://forum.xda-developers.com/xperia-z-ultra/help/newbie-guide-t2959447/post57719084#post57719084
Click to expand...
Click to collapse
Thanks @wtfhax for your reply.
I think it was reverse connection which made phone reset. As I read in the links sent by you, magnetic charging cable is not a good solution then, since it can damage battery. I'll avoid charging with this cable now onwards and will stick with USB charging.
But, I think, this is a bad design from Sony. There should have been a protection in-built for reverse connection as well.
Coz the charging port are never meant for non genuine magnetic cable...
Just be careful if u still wanna use it by marking TOP on it...
Reverse polarity might cause the circuit to malfunction...
Cheer
hello
its supposed to do that m8 connect the magnetic chargers the wrong way round the the phone instantly resboots
to add..
Faced the same issue myself.
To add to this, ever since I have used the magnetic charging cable, my screen flickers - dims at times, phone doesnt respond and wat not. Thinking to reset factory or root it out.
Guys, would CYnaogenmod help?
anandarora said:
Faced the same issue myself.
To add to this, ever since I have used the magnetic charging cable, my screen flickers - dims at times, phone doesnt respond and wat not. Thinking to reset factory or root it out.
Guys, would CYnaogenmod help?
Click to expand...
Click to collapse
Those problems occur during charging??
I have 1 magnetic charging cable that were bad and it tends to charge n no charge...
Better to use high quality or genuine 1 instead...
My magnetic charging cable pulled the whole port off the side of the phone.
My Sony battery case did the same.
I like the ultra but it is not built to last.
gurung_vishwas1 said:
Thanks @wtfhax for your reply.
I think it was reverse connection which made phone reset. As I read in the links sent by you, magnetic charging cable is not a good solution then, since it can damage battery. I'll avoid charging with this cable now onwards and will stick with USB charging.
But, I think, this is a bad design from Sony. There should have been a protection in-built for reverse connection as well.
Click to expand...
Click to collapse
there is if you look at the contacts on your phone you'll see the contact on the right is more oval and the cheapo charger cables don't have the facility to detect the difference.