Hello, sympathetic the site and all councils! J have the s200 with the Rom touch, and I also have an infra-red portable keyboard! Is the problem that I do not manage to have an infra-red port, y' has to you it a solution? Thank you in advance
what rom you have??
a lot of roms have IR problems ... use the Koster version ... it have original Prophet drivers inside.
I have touch for prophet 4.0.0.6, but I had put urgent due following:
I took in test in a store the keyboard in question yesterday, but I was to return this morning to bring back it if that were not appropriate to me, which was the case….
Thus I will thank you seek now a keyboard in bluetooth which will be certainly more reliable, for the answer.
i am not an owner of an athena but i am trying to copy the diamond touchflo 3d program. this is mine and idsk's first attempt far as a cab with everything in it. i own a tilt aka kaiser and he has trinity. idsk says it works on his device but how well i don't know.
i ask since athena is a vga device to try it out and report here. i want to make sure this will work.
I TAKE NO RESPONSIBILITIES IF THI CAB CAUSE ANY PROBLEMS. SO PLEASE USE AT OWN RISK.
UPDATE: YOU CAN DOWNLOAD FROM HERE
Dont work for me. Verry verry slow and now graphic. But you can uninstall it - or dont try it
not working for me... uninstalled!
Slowness not possible
& There is no graphics
thanks for trying.....back to the drawing board.
working on beta 2 touchflO 3d now.
assuming you are using the files from the the touch diamond, Pawel is way ahead of you, he has already tried this and dropped it for now, because we have a different graphics chip to the touch diamond and so the video acceleration does not work ! if you write video drivers then you will get it to work !
When i upgraded my Athena to Michy WM6.1 I have noticed that blue screen which appears when Athena is closed with its kb,doesnot show AT ALL. what seems to be wrong?
I pimped a little Athena with vinyl folio, so I am afraid that I spoiled broke something(which is almost impossible-and I hope so that this issue is Rom issue,not hardware??)
thanx
drgrabez said:
When i upgraded my Athena to Michy WM6.1 I have noticed that blue screen which appears when Athena is closed with its kb,doesnot show AT ALL. what seems to be wrong?
I pimped a little Athena with vinyl folio, so I am afraid that I spoiled broke something(which is almost impossible-and I hope so that this issue is Rom issue,not hardware??)
thanx
Click to expand...
Click to collapse
Hi,
There should be a prog in Settings/system called SubDisplay, open that and tick the box. restart your machine and it should be working fine. If that doesn't work then you may have to hard reset if it has to be there, there may be a reg setting changed as well if you know where to find it?
Jay
Thanx Jay!
it is working now!
I am a real rookie considering Athena.
long live and prosper!
greetings from Serbia!
glad to be of help. Which Michy rom did you install? They are all very good.
live long and prosper, are you a Trekie?
Hi Jay,long time no write!
Currently I am using Michy R6.1 Rom,
and I am very satisfied with it,only one thing bother me:when I turn device in portrait mode Manilla turns ,and I have to turn it off manually,how to disable Manilla?and big HTC home?
I am not real hard-core Trekie , but temporary I afforce myself .
do you recommend R4 Rom(seen from your signature) and why?and if your answer is yes,what seams to be bugs in R4,and what it needs-shortly?
I am looking for stable as soon as possible clean Rom,any suggestion?
greetings
Hi all,
Yes I'm new, and i was wondering if I could have a bit of help please?
I have a Neon200, and the Nike stuff obviously doesn't work for it. Saying that however, I have gone through the Neon Hard-SPL, from here > http://forum.xda-developers.com/showthread.php?t=377260
and then i upgraded to a russian 6.1 (which is also on the board somewhere), and now plan to move to 6.5. I found one here, but apparently will have issues with the keyboard and the camera button.
My question is, is anyone else working on a ROM for wm6.5 that will work on my neon200? Or is there anyway to get a niki rom to work on it?
Thanks, and sorry if I've just asked a bunch of noob questions.
I got the 6.5 rom to work on my phone (albeit with limited physical key support)
But now I'm having the issue of my sim not working in there (no service, denied, searching..)
Think this is because the radio I have for it now doesn't work.
Can anyone help me with that?
My phone is the Neon200 (duh..), from Telstra NextG in Australia.
Cheers guys
Yeah.. I've been poking around a bit as well.. I think the official HTC image is only 6.1.. so if anyone can port the Niki 6.5 over it would be great!
Hmm...
It may be an issue with thephone. I still have it, and also have a 16 key NIKI100 now, as well as the touch diamond.
Think i'll just sell the other ones and stick with the diamond.
hi ,i made a dll that translates TG01 accelerometer data into HTC's,it works well in most game about accelerometer .
How to use it : put the dll file to windows folder.
Resco Bubbles is the test game!!
which games working?
rubesh said:
which games working?
Click to expand...
Click to collapse
Yes, tested but doesn't work with a game called SensorMAze for HTC. Could you pleas upload a game to test it?
Thanks
doesn't work with Asphalt 4, Ferrari GT, Xtrakt, Experiment 13.
Work with NFS Undercover
Amazing stuff thank you for your efforts.
Yes! keep up the good work man
you sir are a genius, brilliant little mod. resco works good. just a little question though, is there any way to increase the sensitivity? i have calibrated it in-game and with windows 6.5 but it seem that if i tilit it left then right it takes a few seconds for the momentum to stop and the ball to turn back.
other than that, your .dll is great, good work
Great
Works but as the last post said there is a minor delay going from left to right, im testing GLESBoing (doodle jump like game).
really great. thanks a lot, had been waiting for something like that for ages.
tested with G-alarm, working u
phillmydiamond said:
i have calibrated it in-game and with windows 6.5 but it seem that if i tilit it left then right it takes a few seconds for the momentum to stop and the ball to turn back.
Click to expand...
Click to collapse
i test this problem ,i find the TG01 G_sensor data have more fluctuation(or noise) than HTC diamond .when the mobile phone comes to a standstill,TG01 data fluctuation about 0.020g,but HTC diamond about 0.002g, i don't know what caused this problem,Toshiba's driver or TG01 accelerometer chip?
Great work - thanks!
Great work, but in Omnia (first version) HTCemu is much better. May be sensor in Omnia is better, but i don't think so. We have a lot of job...
Thanks Man I've really tried for a long time to get the sensor workin thanks buddy!!!!!!!!!!
wangzhee said:
i test this problem ,i find the TG01 G_sensor data have more fluctuation(or noise) than HTC diamond .when the mobile phone comes to a standstill,TG01 data fluctuation about 0.020g,but HTC diamond about 0.002g, i don't know what caused this problem,Toshiba's driver or TG01 accelerometer chip?
Click to expand...
Click to collapse
i just tried changing the .net from 3.5 to 2.0 and it seemed to have it made it more eratic in the menu display and i felt like it was less floppy in the game, may just have been me on my tg01 but it may lend itself to something .net is setup as to how fast the g-sensor gets processed?
if it was a htc one then its generally accepted code but if its a custom/unknown one then the commands would/might be different and may need interpreting before they even get close to doing something, causing a delay.
can we probe the chip to see what it actually accepts somehow? like you can on modems?
wangzhee said:
hi ,i made a dll that translates TG01 accelerometer data into HTC!!
Click to expand...
Click to collapse
This is completely brilliant, many thanks for your hard work.
Cheers,
David.
DavidStrange said:
This is completely brilliant, many thanks for your hard work.
Cheers,
David.
Click to expand...
Click to collapse
Could anyone post more programs when this "translator" works correctly? I've tested some HTC apps and response seems to be a bit "slow".
Thanks!
(However, you have been the first able to do it, congratulations of course!)
It is rather good
Hello chaps,
So far the program seems very functional. The only thing I've tried that doesn't work is Sensormaze. Marble Worlds 2 and NFS have been transformed.
Many thanks once again.
Cheers,
David.
phillmydiamond said:
i just tried changing the .net from 3.5 to 2.0 and it seemed to have it made it more eratic in the menu display and i felt like it was less floppy in the game, may just have been me on my tg01 but it may lend itself to something .net is setup as to how fast the g-sensor gets processed?
if it was a htc one then its generally accepted code but if its a custom/unknown one then the commands would/might be different and may need interpreting before they even get close to doing something, causing a delay.
can we probe the chip to see what it actually accepts somehow? like you can on modems?
Click to expand...
Click to collapse
i think .net influences the game speed rather than my driver or tg01 driver,because my driver is based on win32 having nothing to do with .net,and tg01 driver can not work under the .net. But i will test it .
actually,it is not delay ,it's just a bit of out of control .
the next work is trying to bypass the Toshiba's own driver and read the chips data directly to see it ,but is hard for me.
Good job...
i tried Gpad... works too...
G sensor is recignized... but Xtract.exe still doesn't work... maybe because version 2...
other keep it up !! Good Work...
Looks so gooodddd...
wangzhee said:
i think .net influences the game speed rather than my driver or tg01 driver,because my driver is based on win32 having nothing to do with .net,and tg01 driver can not work under the .net. But i will test it .
actually,it is not delay ,it's just a bit of out of control .
the next work is trying to bypass the Toshiba's own driver and read the chips data directly to see it ,but is hard for me.
Click to expand...
Click to collapse
not sure if this helps but i was looking at the qualcomm website and it said the hardware supports windows & linux so could we not pull a linux driver and wrap it up so it can be used by win32? or even comparing the different drivers against other snapdragon based devices to see if we can pull a nugget to help us?
also i remember seeing a reg setting for the g-sensor and the dword was 101,i increased it on my device to 200 a while ago and it did nothing but crash my tg01, im going to try again with smaller increments and see if there is any change in anything. is there any programs around to monitor the responsiveness of the sensor directly on the device in realtime?