Related
RESOLVED:
if you are unable to use phone codes (like I was) then you are probably an idiot, just like I am. Go back to DCD's original post and make sure to install a Carrier ROM (linked to very clearly in his first post).
Many thanks to Santehnik for providing a workaround and to GC14 for providing the actual solution.
###################################################################
I just flashed to the new 3.1.6 and am unable to access the phone codes (e.g. ##775#).
I tried entering it into the dialer (as well as ##DIAG#, ##DEBUG#, etc...) numerous times. Resetting my device and trying again. No love.
I also tried running \windows\EPST.lnk and \windows\EPST.exe. What appears to happen is that the program appears to load for 1/2 second and then disappear (presumably it is crashing, though I dont know for sure).
I re-downloaded the ROM on a different machine and reflashed my Titan, but it made no difference.
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Has anyone else had this problem? Any suggestions?
Here are what the codes link to:
##778 = ..\Windows\EPST.exe ##778
#33284 = ..\Windows\FieldTrial.exe
#3424 = ..\Windows\DMRouter.exe /DIAG
#38278 = ..\Windows\Fuart.exe Fuart
~~~~~~~~~
Note to self, add that info to the Wiki plus a link to an archive of WM links to execute those functions.
bob, what dialer do you have installed?
First of all use ##778CALL (instead #)
And put files from zip into windows folder.
For me this works
p.s can you send Phone Codes.cab to santehnik.ua""gmail.com
I can't find it
For all of those I need 2 # key presses for them to work. I'm using DCD 3.16 w/ radio 3.39 if it makes a difference.
Also what the heck is fast uart mode? (##38278)
Here are what the codes link to:
* ##778 = ..\Windows\EPST.exe ##778
* #33284 = ..\Windows\FieldTrial.exe
* #3424 = ..\Windows\DMRouter.exe /DIAG
* #38278 = ..\Windows\Fuart.exe Fuart
Click to expand...
Click to collapse
Key two things:
1. FieldTrial, DMRouter, and Fuart are ##33284, ##3424, and ##38278 respectfully.
2. You should point out that for Sprint, there's an extra # at the end instead of pressing Send. (ex. ##778#)
gc14 said:
bob, what dialer do you have installed?
Click to expand...
Click to collapse
I have the default dialer installed. I am using the "stock" DCD 3.1.6 ROM. I havent installed ANYTHING since i reflashed. I dont even have my SD card popped in. It's as clean as you could ask for.
I tried using ##775[CALL] and it does exactly what clicking on EPST.lnk does - it flashes for 1/2 second and then disappears.
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Click to expand...
Click to collapse
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
gc14 said:
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
Click to expand...
Click to collapse
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). It was the one from the wiki that says it includes radio 3.39.10. You can find it here: http://forum.ppcgeeks.com/showthread.php?t=26119.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). I believe that it was 3.54 (though I dont remember for sure). It was the one from the wiki that says it includes radio 3.39.10.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
Click to expand...
Click to collapse
Ok, first of all, I only say this stuff because if I had a dime for every person who doesn't read dcd's first post in his kitchen thread, I'd be a millionaire.
You did NOT install the Sprint Carrier Cab. You installed the Sprint Update Rom to get the radio. Again, that is not the Sprint Carrier Cab that is required for 3.1.6.
The reason you have to use ##775 send and not ##775# like all other Sprint customers, is because you did not install your carrier cab. Without the cab, it defaults to ##775 send.
It worked on 3.0.4 because a carrier cab was not required, instead you picked your carrier in the kitchen.
Lastly, copying those files might have "fixed" your ability to get to EPST or DMRouter, but not the correct way. Also, there are other very important files other than those that you are missing.
Click on dcd's 3.1.6 kitchen thread and read the ENTIRE first post.
Thank you GC. I have installed the Carrier Cab and updated the original post.
bobjase said:
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
Click to expand...
Click to collapse
bobjase, can you send me that .cab also. I've been looking all over for it. [email protected] - Thanks!
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Not sure if these will work but found them when I was looking for my MSL.
Use this method. I don't know who found it, but credit goes to them.
Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a about 10 minutes (more time will not hurt), and soft-reset.
* Check to see that the file \Atlog\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:
~~~~~~~~~~~SNIP~~~~~~~~~~~~
00:00:00 Tx:AT+HTC_RMSL=0\r
00:00:00 Rx:+HTC_RMSL: (###THIS WILL BE THE MSL###)\r\n0\r
00:00:00 Tx:AT+HTC_ROTKSL=0\r
00:00:00 Rx:+HTC_ROTKSL: 123456\r\n0\r
~~~~~~~~~~~SNIP~~~~~~~~~~~~
The numbers next to the Rx: +HTC_RMSL line should be your MSL
OR
Do a search for BAFMSL. It's a universal SPC code finder tool.
It requires .net 3.5, and tends to fail randomly, but so far has worked on 8 of 10 phones I have tried it on.
BTC
http://www.rimweb.in/forums/index.php?showtopic=17301
=] Awesome. This is just what I needed. Thanks.
HTC MSL
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Last edited by MysticThunder; Today at 01:38 AM.. Reason: new title.
Should be as simple as 000000. Same as Verizon...I just did mine, hope it works....KC
On my Titan all I did after upgrading the rom was create a new connection, called it broadband, entered #777 as the number, and my phone number followed by @vzw3g (password blank, check save password) and it worked fine.
MysticThunder said:
I finally got my HTC programmed and working. Everything with it is great, except now it cannot connect to the internet.
I get two kinds of error messages- initially it kept telling me that my username or password was wrong..... I couldnt find a place to enter either of those [not that i knew what they should be anyway], and I've never had this problem on my other HTC's. Now its telling me that it cannot connect for an unknown reason and that i should change the settings if needed or reset the device according to manufacturer's documentation....
What should I do?
I upgraded to wm6.1 last night, and im running USCC as my carrier.
It was suggested to me that i enter ##778 mode and change some settings there, but i do not know the MSL for my area.
Any idea where to find that?
Thanks.
Click to expand...
Click to collapse
there are a few settings in you need to make sure are corect in the m ip settings of the phone after u press ##778. I am using uscc and had the same issue. so I know this to be a factor after updating roms. Below are the correct settings for your m ip
Number of Profiles : 6
Active User Profile Index : 0
MIP_MODE : Mobile IP Prefered
MIP Registration Retries : 1
MIP Registration Retry Timeout : 2000 ms
MIP Pre-Registration Timeout : 3
Mobile Node-HA Authentication : Enable
Send a Registration Request Only in Use : Enable
Dormant Hanfoff Optimization: Enable
I cant stress enough... these need to be exact with uscc... dont forget to run the uscc carier cab.
If you want to have EVDO when it comes to your areas as well, under Security Settings, make sure the HDR username is your [email protected], and the ESN is in hex and all capital letters. The HDR Password is your ESN the same as above but no @uscc.net on the end.
Below this screen is also the ppp username and password, they should be your phone#@uscc.net and your phone # as the password.
These 2 settings are also necessary for data to work correctly.
BTC
Hi everyone, PLEASE READ PLEASE READ STEP BY STEP i was reading and a lot of people have questions about going to metropcs and nobody give them really good help, so i decided to make this post for you guys but please please do not post me asking how to do it in other htcs phone or worst in samsungs, lgs, etc etc I AM DOING IT THIS ONLY FOR HTC RAPHAEL or 6850 or touch pro cdma what ever you want to call it. ok so lets get start it. you have either two options:
1. Install the Hard-SPL (to unlock the phone), Install custom radio, Install custom rom, Install and modify files to make it work in Metropcs internet,mms etc. and finally take it to metropcs pay between $40 to $60 box so they flash it and you have already the phone working with everything. (recommened for dummies)
2. Install the Hard-SPL (to unlock the phone),Install custom radio Install custom rom, Install and modify files to make it work in Metropcs internet,mms etc. and Flash the HTC 6850 Touch Pro MEID and ESN to Clone the phone (i assume you have one phone already working on metropcs and you dont want to use the phone anymore so you clone it hehehehe.
--------------------------------------------------------------------------
1.Option. Download this file first:
http://www.4shared.com/file/140639926/7fa190d6/TP_ESN_FILES2.html
Important:
first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!
preparations before flash:
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).
instructions:
1) extract Hard-SPL Raphael_CDMA_HSPL_037.zip
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you extracted before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.37.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.37.CMONEX MFG.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.
(Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!! )/ source
Next.Next.
we need to install the Radio, (make sure the phone is recognized by microsoft sync) i relized that the better one out there for metropcs is Telus v1.04.05V thats why i put it in my rar file.
1. extract Telus v1.04.05V and run ROMUpdateUtility
2. install it
3. when is done make sure the radio is v1.04.05V (in the dilaler press menu then press phone information and look for Radio.)
Next.
Install the rom of your chooise.I recommend for metropcs either mightyrom
(http://forum.ppcgeeks.com/showthread.php?t=52695) or NFSFAN's Custom WM6.5 ROMs (http://forum.xda-developers.com/showthread.php?t=516509) a lot of people ask for a custom rom for metropcs and thats not necesary to have almost every raphael cdma rom out there is compatible with metropcs.
-Elite Rom RC1 choose telus
http://forum.ppcgeeks.com/showthread.php?t=72401
-NFSFAN's Custom WM6.5 ROMs.
http://forum.xda-developers.com/showthread.php?t=516509
-www.MightyROM.com
http://forum.ppcgeeks.com/showthread.php?t=52695
-HAZE V1.6 Native 6.5 Kernel.
http://forum.xda-developers.com/showthread.php?t=561931
-Reflectionist Rom V0.6
http://forum.xda-developers.com/showthread.php?t=562337
-Black Dragon Titanium Rom 23420
http://forum.xda-developers.com/showthread.php?t=547846
-alpha build 1.5
http://forum.xda-developers.com/showthread.php?t=559640
-JUICY 8
http://forum.xda-developers.com/showthread.php?t=518466
-WM 6.5 21501 djbeames
http://forum.xda-developers.com/showthread.php?t=509544
-grooveROM 5
http://forum.xda-developers.com/showthread.php?t=534888
-EnergyROM 'Photon'
http://forum.ppcgeeks.com/showthread.php?t=69545
-Calkulin's Visual
http://forum.ppcgeeks.com/showthread.php?t=87040
-MurdaROM
http://forum.ppcgeeks.com/showthread.php?t=87040
-SsS-ROMv0402
http://forum.ppcgeeks.com/showthread.php?t=68755
-NK-All Carriers-RZ Baseline 3.2
http://forum.ppcgeeks.com/showthread.php?t=81038
-Demolition 6.5
http://forum.ppcgeeks.com/showthread.php?t=66799
-Psyki 4
http://forum.ppcgeeks.com/showthread.php?t=66993
-JD's Clean
http://forum.ppcgeeks.com/showthread.php?t=73860
-Sac ROM
http://forum.ppcgeeks.com/showthread.php?t=68734
-SilenceROM
http://forum.ppcgeeks.com/showthread.php?t=84859
-eRice
http://forum.ppcgeeks.com/showthread.php?t=46965
-MERDIN'S WMPro
http://forum.ppcgeeks.com/showthread.php?t=50716
-StarROM 2.0
http://forum.ppcgeeks.com/forumdisplay.php?f=68&order=desc&page=2
-TruXt v5.1
http://forum.ppcgeeks.com/showthread.php?t=82653
-Chaos ROM
http://forum.ppcgeeks.com/showthread.php?t=75974
-Longhorn ROM
http://forum.ppcgeeks.com/showthread.php?t=65849
-Sceptre Rom 3.4 SenseSuite
http://forum.ppcgeeks.com/showthread.php?t=75215
-dcd's hermann ROM 2.00
http://forum.ppcgeeks.com/showthread.php?t=69754
-091409 XOR
http://forum.ppcgeeks.com/showthread.php?t=84394
-CFAY 1.5.5
http://forum.ppcgeeks.com/showthread.php?t=50471
-Juggalo TP ROM v0.08B (choose telus)
http://forum.ppcgeeks.com/showthread.php?t=49341
-JonRom Version 2.55
http://forum.ppcgeeks.com/showthread.php?t=79924
-FuzeBerry II
http://forum.ppcgeeks.com/showthread.php?t=62786
-midNIGHT v5.5
http://forum.ppcgeeks.com/showthread.php?t=75032
-Copper v.0.0.0.1
http://forum.ppcgeeks.com/showthread.php?t=64242
-Ivan's ROM 1.9.S.V
http://forum.ppcgeeks.com/showthread.php?t=48463
-dB_ROM WM 6.5
http://forum.ppcgeeks.com/showthread.php?t=67426
-FALLEN ROM
http://forum.ppcgeeks.com/showthread.php?t=63479
-Yay 4 Juggs
http://forum.ppcgeeks.com/showthread.php?t=61274
-Jmz Rom 3.0
http://forum.ppcgeeks.com/showthread.php?t=61953
-FireROM
http://forum.ppcgeeks.com/showthread.php?t=73395
-KK's Loaded ROM v1.8
http://forum.ppcgeeks.com/showthread.php?t=52307
-Tech1 MultiMedia
http://forum.ppcgeeks.com/showthread.php?t=72782
-JOKER ROM
http://forum.ppcgeeks.com/showthread.php?t=68213
-DREAM Full and Lite
http://forum.ppcgeeks.com/showthread.php?t=49338
-THE LAST-Forgiven
http://forum.ppcgeeks.com/showthread.php?t=70059
-NSFW College ROM
http://forum.ppcgeeks.com/showthread.php?t=69371
-PhantomROM
http://forum.ppcgeeks.com/showthread.php?t=62796
-JowPod
http://forum.ppcgeeks.com/showthread.php?t=69269
-Merdin's
http://forum.ppcgeeks.com/showthread.php?t=59780
-PsykiROM v1.0
http://forum.ppcgeeks.com/showthread.php?t=65145
-nueROM-S
http://forum.ppcgeeks.com/showthread.php?t=42777
i think thats it if you know another one just let me know i will post it.
Finally the most difficult part in this process.
set up the internet, mms and GPS
download this file:
http://www.4shared.com/file/140658132/5838a6f3/MetroPCS.html
-connect your phone to de pc and install get spc in the phone
-run it and press on get spc, press ok or yes and it will display six digit number write this number down because we will need it.
-in the dialer type ##778# click on edit and write the six digit number that you wrote down.
-next a screen that says EPST and below that say Display will appear.
-we well need to modify some of this ones
DISPLAY
-NAM NAME write you ten digit numer
-SCM write the first two digit of area code of the phone number(if appears to be editable if not leave it like that)
-MSID write your ten digit phone number
click in view info and go to
NAM SETTINGS
-NAM NAME write your ten digit phone number
-MOBILE DIRECTORY NUMBER write your ten digit number
-MIN1 4764516
-MIN2 first three digits of your phone number (area code)
-MSID write your ten digit phone number
-MCC 310
-MNC 27
-NMSI 27and write your ten digit phone number
-IMSI 31027and write your ten digit phone number
Part 2
click in view info and go to
CDMA SETTINGS
-A-SYS PRIMARY 283
-B-SYS-PRIMARY 384
-A SYS-SECUNDARY 691
-A SYS-SECUNDARY 777
-MON_TERM_FOR_HOME ENABLE
-MON_TERM_FOR_SID ENABLE
-MON_TERM_FOR_NID ENABLE
-EVRC ENABLED DISABLED
-HOME PAGE VOICE 13K
-HOME ORIG VOICE 13K
-ROAM ORIG VOICE 13K
click in view info and go to
HOME SID/NID
-HOME SID/NID #1 6503/65535
click in view info and go to
MODEM SETTINGS
-SLOT CYCLE 1
-PREFERRED SERVING AUTO
-PREFERRED MODE AUTO
-HDR HYBRID ENABLE
-CLEAR ALL MRU NO
click in view info and go to
-PRL
-UPDATE PRL FILE AND YOU HAVE TO TRANSER THE FILE 02001 THAT IS IN METROPCS.RAR AND SELECT THAT ONE
click in view info and go to
SECURITY
-HDR AN AUTH USER ID [email protected]
-HDR AN AUTH PASS metropcs
-PPP USER ID [email protected]
-PPP PASS metropcs
click in view info and go to
DATA PARAMETERS
-PACKET DIAL #777
click in view info and go to
M.IP SETTINGS
-NUMBER OF PROFILES 6
-ACTIVE USER PROFILE 0
-MIP_MODE SIMPLE IP ONLY
-MIP REGISTRATION RETRIES 1
-MIP REGISTRATION RETRY 2000 ms
-MIP PRE-REGISTRATION TI 30
-MOBILE NODE-HA Disable
-SEND A REGISTRATION Enable
-DORMAND HANDOFF Disable
click in view info and go to
M.IP DEFAULT PROFILE
-ENABLE PROFILE Enable
-NAI [email protected]
-MN HA SPI SET Disable
-MN HA SPI VALUE 0
-MN AAA SPI SET Disable
-MN AAA SPI VALUE 0
-HOME ADRESS 0.0.0.0
-PRIMARY HA ADDRESS 255.255.255.255
-SECUNDARY HA ADDRESS 255.255.255.255
-HA SHARED SECRET metropcs
-AAA SHARED SECRET metropcs
-DMU 0
-MN 0
make sure that
M.IP CUSTOMER PROFILE 1,2,3,4,5,6 are Disable
click menu ok and reset.
when the phone resets please install Metro WAP and Arcsoft 5_0_70_24 from METROPCS.CAB
also after everything is done please dont forget to take the phone to metropcs so they can put you nam in the metropcs system thats what they call flash the phone to metropc.
Internet Sharing - tethering big thanks to silvaadams from ppcgeeks
make sure you have internet on your phone ofcourse
start up comm manager and click your internet sharing button thingy lol
click connect on the lower left hand corner
wait for phone to say check usb connection
then connect phone to usb and usb to computer (should say connected)
open internet explorer
go to settungs
go to internet options
go to connections tab
click on lan settings
click proxy server check use proxy blabla
then type wap.metropcs.net port 3128
then ok
open up firefox
once open go to tools> options> advanced> network
under network click settings
select manual proxy config
under http proxy type
wap.metropcs.net [port:] 3128
then check off "use this proxy server for all protocols"
--------------------------------------------------------------------------------------------------------------------------------------------
2.option. HTC 6850 Touch Pro change MEID change ESN Repair / Clone Solution i assume you have a phone already in metropcs so u can clone it and avoide paying $40 or $50 dollars activation fee.
Download this file first:
http://www.4shared.com/file/140639926/7fa190d6/TP_ESN_FILES2.html
PLEASE READ SOME DIFFERENCES FROM OPTION 1.
Important:
first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!
preparations before flash:
1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_025_MFG).
instructions:
1) extract Hard-SPL Raphael_CDMA_HSPL_025_MFG
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you extracted before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.25.CMONEX MFG.
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.
NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.
NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.
(Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!! )/ source
-install the radio that is on TP ESN FILES2\RAPHING
-install the rom of your choise from Option 1
-now MAKE SURE YOU WRITE DOWN OR BACK UP ALL YOUR DATA SETTINGS BEFORE YOU DO THIS JUST IN CASE
- download
http://www.4shared.com/file/140658132/5838a6f3/MetroPCS.html
- install WModem_Driver_Installer_v1.2.2.4_WWE
-make sure to install get spc on the phone run it and get ur spc code
-disconnect phone
-put phone in diag mode (dial ##3424#) wait until the white screen disapear and connect your phone to ur pc
-now install all the drivers but maybe it will tell that u need qcmdmxp or another one so just select files from Program Files\HTC\WModem_Installer\WinXp
-Disable USB connection in Active Sync by unchecking checkbox in Connection Settings of Active Sync
-Hold Pwr and Vol Down buttons and push reset button to boot the phone in bootloader mode.
Part 3
-Run mtty.exe from TP ESN FILES2
-Leave every setting alone apart from change the 'Port' to 'USB' in yhe drop down box. Hit OK.
In the window that opens up, type the following commands (All Commands are case Sensitive) Hit enter after typing each one. You may see nothing while typing, just type carefully.
1. rtask a
12 echo_on
3. readCID
4. writeCID 00000000
5. readCID (window should return CID as 00000000)
6. rtask c (will probably give and error - mine did!)
-Soft reset phone and close mtty.
-Re-enable USB connection in connection settings of ActiveSync. Make sure phone is 'connected' to ActiveSync, you might have to unplug and plug in usb to make this happen.
-Flash phone with Raphael_CDMA_HSPL_037.exe
-Let phone restart.
-disconnect phone
-put phone in diag mode (dial ##3424#) wait until the white screen disapear and connect your phone to ur pc
-download http://rapidshare.com/files/210789608/QPST_2.7.323__2008-09-19_.rar
-open QPST configuration and click on add port
-make sure to memorize the port that says htc diagnostic that port com is really important we well use it for many things
-Launch DFS. from TP ESN FILES2
-Select your phone's com port. (top left ish) this is the port that i was talking about diagnostic port com
-Select 6950 from the HTC devices menu on the left. Before you all start, yes I know we are programming a 6850, but the secret here is that the MEID portion of the 6850 equipment file in DFS ties up to the MEID locations in the radio rom supplied (which was ported from the diamond)
-Ignore any errors at the bottom of the screen about equipment not found etc... Remember, just follow the instructions!! So, once the com port is connected, go the MEID section and type your originial metropcs phone the one you have to clone MEID(D)(decimal) it should be on the back of the phone also make sure that the original metropcs phone os turn off u dont want to turn this phone ever in your life. Ignore the pESN that it creates but do not modify it
-Click Write like 4 times and it will write it to the phone no matter what it says at the bottom of the screen.
-Close DFS and soft reset.
-now go to http://www.previo.net/meid-esn-converter.html
-type your MEID(D)(decimal) and click submit the important thing here is ESN the hex not the dec. so copy the hex one.
-Go into diag mode ##3424# again wait untill the white screen disappear and connect it usb to ur pc
-Open up the attached CDMA Workshop 2.7 cdma workshop.exe but the one is in METROPCS.RAR not the one is in TP ESN FILES2 and select the com port to connect your phone. THIS COM PORT IS THE DIAGNOSTIC PORT.
-click connect and then read
-in your phone go to dialer and type ##778# edit and type your spc code then.
-Go to the security tab in workshop and click read by the esn. It should display your current esn.
-Type the esn that the website give you the hex one. this should be your original metropcs nam number
-click write.
-Go to Nam tap and Click in Banner
-Type MetroPCS and
-click write
-now Close CDMA WS and soft reset
-now install the radio u want to use from here
http://forum.xda-developers.com/showthread.php?t=531134&highlight=radio
recommend TELUS v1.04.05V or VERIZON v1.03.03V
-when is done type in your dialer ##778# edit in the screen that says EPST and below that say Display will appear.
-we well need to modify some of this ones
DISPLAY
-NAM NAME write you ten digit numer
-SCM write the first two digit of area code of the phone number(if appears to be editable if not leave it like that)
-MSID write your ten digit phone number
click in view info and go to
NAM SETTINGS
-NAM NAME write your ten digit phone number
-MOBILE DIRECTORY NUMBER write your ten digit number
-MIN1 4764516
-MIN2 first three digits of your phone number (area code)
-MSID write your ten digit phone number
-MCC 310
-MNC 27
-NMSI 27and write your ten digit phone number
-IMSI 31027and write your ten digit phone number
click in view info and go to
CDMA SETTINGS
-A-SYS PRIMARY 283
-B-SYS-PRIMARY 384
-A SYS-SECUNDARY 691
-A SYS-SECUNDARY 777
-MON_TERM_FOR_HOME ENABLE
-MON_TERM_FOR_SID ENABLE
-MON_TERM_FOR_NID ENABLE
-EVRC ENABLED DISABLED
-HOME PAGE VOICE 13K
-HOME ORIG VOICE 13K
-ROAM ORIG VOICE 13K
click in view info and go to
HOME SID/NID
-HOME SID/NID #1 6503/65535
click in view info and go to
MODEM SETTINGS
-SLOT CYCLE 1
-PREFERRED SERVING AUTO
-PREFERRED MODE AUTO
-HDR HYBRID ENABLE
-CLEAR ALL MRU NO
click in view info and go to
-PRL
-UPDATE PRL FILE AND YOU HAVE TO TRANSER THE FILE 02001 THAT IS IN METROPCS.RAR AND SELECT THAT ONE
click in view info and go to
SECURITY
-HDR AN AUTH USER ID [email protected]
-HDR AN AUTH PASS metropcs
-PPP USER ID [email protected]
-PPP PASS metropcs
click in view info and go to
DATA PARAMETERS
-PACKET DIAL #777
click in view info and go to
M.IP SETTINGS
-NUMBER OF PROFILES 6
-ACTIVE USER PROFILE 0
-MIP_MODE SIMPLE IP ONLY
-MIP REGISTRATION RETRIES 1
-MIP REGISTRATION RETRY 2000 ms
-MIP PRE-REGISTRATION TI 30
-MOBILE NODE-HA Disable
-SEND A REGISTRATION Enable
-DORMAND HANDOFF Disable
click in view info and go to
M.IP DEFAULT PROFILE
-ENABLE PROFILE Enable
-NAI [email protected]
-MN HA SPI SET Disable
-MN HA SPI VALUE 0
-MN AAA SPI SET Disable
-MN AAA SPI VALUE 0
-HOME ADRESS 0.0.0.0
-PRIMARY HA ADDRESS 255.255.255.255
-SECUNDARY HA ADDRESS 255.255.255.255
-HA SHARED SECRET metropcs
-AAA SHARED SECRET metropcs
-DMU 0
-MN 0
make sure that
M.IP CUSTOMER PROFILE 1,2,3,4,5,6 are Disable
click menu ok and reset.
when the phone resets please install Metro WAP and Arcsoft 5_0_70_24 from METROPCS.CAB
reset it one more time
finally call *228 wait untill the spanish thing is over and press 1 then wait 2 seconds press 1 again wait 2 seconds and press 1 again this will make u talk to custumer service tell them u are having trubles with ur phone and you need to reprogram your phone sometimes they are lazys and dont want to do it so insinst. please give them your MEID(D) decimal number and depend of your phone they will tell you do this or do that but dont do it write everything down and tell them yes ok i done hahaha in my case of kyocera melo they told me to do this type 111111 go to options service go to program 587846 type mdn MYPHONENUMBER type min 3234764516 and type home sid 6503 after that they told me im done just soft reset it and that its but when i hang up i didn do it and please dont do it go to dialer and type ##778# edit and we need to make some changes.
DISPLAY
-NAM NAME write the program number they give u my case 587846
-SCM write 58
click in view info and go to
NAM SETTINGS
-NAM NAME write the program number they give u my case 587846-MOBILE DIRECTORY NUMBER write your ten digit number
-MIN1 4764516 type the min number they give in my case 3234764516 323 is the area code but when u restar the phone this dissapear
click in view info and go to
HOME SID/NID
-HOME SID/NID #1 6503/65535 here just change the the SID for the one they give you my case 6503 the other one leave it as 65535
soft reset and you are ready to go.
Internet Sharing - tethering big thanks to silvaadams from ppcgeeks
make sure you have internet on your phone ofcourse
start up comm manager and click your internet sharing button thingy lol
click connect on the lower left hand corner
wait for phone to say check usb connection
then connect phone to usb and usb to computer (should say connected)
open internet explorer
go to settungs
go to internet options
go to connections tab
click on lan settings
click proxy server check use proxy blabla
then type wap.metropcs.net port 3128
then ok
open up firefox
once open go to tools> options> advanced> network
under network click settings
select manual proxy config
under http proxy type
wap.metropcs.net [port:] 3128
then check off "use this proxy server for all protocols"
thanks to englishdan from mobile-files.com, xda forum, cmonex, and everybody that makes this possible. also i download the files and i forgot most of the post that i got the files so please all the people that makes this files and aport to this excuse me for that my apologize i just want to make this easier to everybody becasue i spend days and days trying to do this thanks to the users from PPCGeeks, howardforums, and mobile-files. without this it wouldnt be possible to make this also my apologize if there is things from other forums not mentioned but i forgot most of the places and users that take infotmation off once again thank u.
wow. this is my first post, and its a shame it had to be a reply to this post.
Where is the credit to the people who worked very hard on this stuff? no props to anyone at all.. not even another site.. so you expect to get all kinds of props for someone else's work? its pretty sad. and i hope you get your props.
-1
hey bro
dude i work my ass off to get this work for 7 days sleeping only 3 or 4 hours i put all this info togheter four you guys and then u re telling me this, no where u will find this and i post at the last thanks to the guy who help me the most but if you go to his profile and see the post http://www.mobile-files.com/forum/showthread.php?t=111584 u will see how empty is a lor of questions and a lot of people that are confused but if you look what i write is so complete that everybody will understand there is a lot of people that i have to thanks but if i write all the names down there will be no space in the forum read bro and i thanks to all of them i mention at the end so please shut the **** off because i work my ass off to make this post.
snail813 said:
wow. this is my first post, and its a shame it had to be a reply to this post.
Where is the credit to the people who worked very hard on this stuff? no props to anyone at all.. not even another site.. so you expect to get all kinds of props for someone else's work? its pretty sad. and i hope you get your props.
-1
Click to expand...
Click to collapse
Great Job Looser
First post...yeah! Something tells me you're like one of those off duty english teachers: cite your sources.... Suck a fat one. Drey did an excellent job trying to help others and not himself. He doesn't even have a paypal link on the bottom of the posting. I have my TouchPro on metropcs fully functioning from multiple links on ppcgeeks and xda-developers. Thanks to many.
Drey, You did great with this post man! Too bad an off duty buttwhole is around fouling things up! What a jerk off. First post! lol.
snail813 said:
wow. this is my first post, and its a shame it had to be a reply to this post.
Where is the credit to the people who worked very hard on this stuff? no props to anyone at all.. not even another site.. so you expect to get all kinds of props for someone else's work? its pretty sad. and i hope you get your props.
-1
Click to expand...
Click to collapse
Metro WAP
It wont let me install the metro wap, I had the phone flashed to metro pcs first, when I did the step where you had to browse to find the prl file, it wouldn't show it, so I didn't do that part, so I installed the metro wap thing to the phone and installed and the phone says they cannot be installed after it tries to install for a little! Help me pleeeaasse!
belalucf said:
It wont let me install the metro wap, I had the phone flashed to metro pcs first, when I did the step where you had to browse to find the prl file, it wouldn't show it, so I didn't do that part, so I installed the metro wap thing to the phone and installed and the phone says they cannot be installed after it tries to install for a little! Help me pleeeaasse!
Click to expand...
Click to collapse
If you had the phone flashed to metropcs all you have to do is input the Metro WAP settings. I did not use a cab file. First HardSPL, Archsoft MMS, then change WAP settings, and the registry.
wap
Yeah I tried inputting all the settings, then creating a new connection called metro pcs with all the port settings and stuff, which I don't even see on this guide. Because if you don't create a new connection, it wont do anything once I removed the sprint connection which I did by changing the guardian file, which allowed me to even remove it. But I was hoping that this program would I guess populate that stuff somehow, so I went through and manually put in all those settings. Still no connection
ok
ok you can do it this way put your phone in dial mode ##3424# wait until white screen turns off and open workshop 2.7 from mteropcs.rar you have to go other tab under PRL choose write and select the ppl file
when you open the browser a window will apear you have to write your [email protected] and metropcs as password
note u set this up ##778# edit Mip default profile thank u
belalucf said:
It wont let me install the metro wap, I had the phone flashed to metro pcs first, when I did the step where you had to browse to find the prl file, it wouldn't show it, so I didn't do that part, so I installed the metro wap thing to the phone and installed and the phone says they cannot be installed after it tries to install for a little! Help me pleeeaasse!
Click to expand...
Click to collapse
thanks bro
thanks bro for me was hard i have to go to so many forums and read and read to make this work for my little brother, i gave him this phone as a gift but in sprint and he have metropcs so i decided to read and find out how this works and after work my ass off for 1 week taking information from here there ask so many questions i decided to make all that info in one post and then this jerk tell me this bro i am doing this to help everybody the important thing here is share so other people can learn and not like me that spend hours in my pc trying to figure this out thanks bro..
stukes said:
First post...yeah! Something tells me you're like one of those off duty english teachers: cite your sources.... Suck a fat one. Drey did an excellent job trying to help others and not himself. He doesn't even have a paypal link on the bottom of the posting. I have my TouchPro on metropcs fully functioning from multiple links on ppcgeeks and xda-developers. Thanks to many.
Drey, You did great with this post man! Too bad an off duty buttwhole is around fouling things up! What a jerk off. First post! lol.
Click to expand...
Click to collapse
mmm
if the cab file that i gave u (THANKS TO RYANMONGUL6800)didnt work try to do it manually http://rferreira1.googlepages.com/revisedMogul6800tometro.pdf if stills not working try to start again first install the cab file then go to ##778# edit ur spc code then edit mip. default profile for the one i have soft reset open browser it should ask for the username [email protected] and pass metropcs if still not owrking u have to follow this
from ryanmongul6800
Click View Info and pick Security, now we are changing this regardless you must do this, we are going to Unauthenticate you and Re-authenticate, it is a Needed step everything in this How To needs to be done and Not skipped! Change the HDR Auth User ID to something bogus like [email protected], the password below it make it something random but remember it, now do the same for PPP user ID and password but make them the same as the HDR ones.
Click view info and pick MIP Settings, Make sure Active Profile is on 0, MIP mode should be Simple IP only, MIP reg retries should be 1, MIP reg retry timeout should be 2000 ms, MIP pre-reg timeout should be 30, Mobile Node HA auth should be Disable, send a reg request should be Enable, dormant handoff to disable.
Click view info and pick MIP Default Profile, Enable profile should be ENABLE, NAI should be [email protected], MN HA SPI set should be enable, MN HA SPI value should be 12c, MN AAA should be enable, MN AAA SPI value should be 2, reverse tunneling should be enable, home address should be 0.0.0.0, Primary HA address should be 255.255.255.255, secondary should be 255.255.255.255, HA shared secret and AAA secret should be metropcs <--lowercase, DMU public should be 0, MN Authenticator should be 0.
Click view info and pick MIP customer profile 1 and make sure Enable profile is DISABLED. Now do the same with the other 4 profiles (profiles 2-5), make sure that the only profile enabled is MIP Default Profile.
Ok now click menu, ok and let it reset, but make sure not to do anything we are going to be going right back INTO EPST, so when it boots back up open the Phone application and dial ##778 call button (PST/EPST), we are going to re-authenticate you its easy, now click edit and enter six zeros, click view info and goto Security, now change the HDR AN Auth to [email protected], password should be metropcs<--lower case, same for PPP user id and Password make them same as HDR.
Click view info and goto MIP default profile, make sure the HA, and AAA shared secrets are both metropcs<---lowercase, then click menu OK and let it reset.
belalucf said:
Yeah I tried inputting all the settings, then creating a new connection called metro pcs with all the port settings and stuff, which I don't even see on this guide. Because if you don't create a new connection, it wont do anything once I removed the sprint connection which I did by changing the guardian file, which allowed me to even remove it. But I was hoping that this program would I guess populate that stuff somehow, so I went through and manually put in all those settings. Still no connection
Click to expand...
Click to collapse
Wap
You're gonna hate me but cdma workshop only goes up to like com25, and the htc device automatically sets itself to com63 regardless of what usb port i put it in. I tried to change it but it shows all the previous ports being used.
hard way
ok you can try this out i have not try it so i dont know if it would work first go to control panel, then system hardware, device manager click universal serial bus controllers and unistall all of them restart your pc and it would install back the usb drivers then connect the phone diag mode if doesnt ask for drivers go to control panel, then system hardware, device manager go to ports( com & lpt) you should see htc diagnostic port if the port is below 27 we are fine if not delete all of them but do not unistall com 1. dont worry it will delete ports that u install thins when u plug things u have to install again so don worry. now if the phone ask you for drivers once u delete everything install them again but this time if still port higher than 27 go to device manager click in com 1 click update drivere install from specific locatiuon, dont search i will install have disk browse go to programs files /WModem_Installer/qcusbmdm.inf next yes ok and thats it you have it in com 1 after u done everything just delete port com 1 and it will install it after u reset the computer thank u..
u need to install WModem_Driver_Installer_v1.2.2
from metropcs.rar
try it in your friends computer or some internet cafe pcs hehehe i know bro always something happens
belalucf said:
You're gonna hate me but cdma workshop only goes up to like com25, and the htc device automatically sets itself to com63 regardless of what usb port i put it in. I tried to change it but it shows all the previous ports being used.
Click to expand...
Click to collapse
if that doesnt work
i pretty sure it will work but just in case the methods dont work try to borrow a pc from ur friend or go to an internet cafe hehehehe
belalucf said:
You're gonna hate me but cdma workshop only goes up to like com25, and the htc device automatically sets itself to com63 regardless of what usb port i put it in. I tried to change it but it shows all the previous ports being used.
Click to expand...
Click to collapse
thanx for all the help i had wap and mms working but internet sharing and gps didnt thanx again
GPS
cdw9800 said:
thanx for all the help i had wap and mms working but internet sharing and gps didnt thanx again
Click to expand...
Click to collapse
Do you have quickGPS installed??? This it is available on the forums and wiki just do a search. It downloads updated satellites for google and other apps to use.
metro pcs
Well i got cdma to see the htc, but when i open the browser it says provisioning data services and says it can't connect.
check
ok just please more specific which rom are you using and the steps u did
belalucf said:
Well i got cdma to see the htc, but when i open the browser it says provisioning data services and says it can't connect.
Click to expand...
Click to collapse
Awesome
I wanted to change carriers from Cricket to MetroPCS. Metro told me I would have to go to Dallas to have the Metro flash applied. Well that is a 2+ hour drive from where i am. I like Metros pricing plan. I can have 3 phones for the same amount I pay for 2 Cricket. Good job on this write up and work you have done.
guide I wrote in CDMA sub-forum, wanted to make sure everyone is aware of it.
enjoy
************************************************** ********
This is a modified guide I wrote for the instinct that will walk you through how to get your MSL code and what to do with it.
DISCLAIMER, I am ###NOT### responsible for any damage you do to your phone or your phone network with this information
************************************************** ********
some uers still getting errors, if you fall into this catagory, you can recover via SPRINT RUU which will wipe your phone
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
---- How to access programming and service menus---
On your phone go to the dialer, then dail in any one of these codes below and after the last # you should get the menu or it will ask for "current code" aka your MSL #
##data# (##3282#)
##debug#(##33284#)
##diag#(##3424#)
##svn#(##786#)
##prl#(##775#)
##prev#(##7738#)
##akey#(##2539#)
##vocoder# (##8626337#)
-------How to get your MSL code---------------
1) download required 3rd party apps
download demo version of CDMA WORKSHOP from
http://www.cdma-ware.com
newest version of qpst 2.7b323
http://rapidshare.com/files/297770360/qpst.zip
download of sprint's official phone as modem (PAM) software
Smartview for Windows
http://www4.sprint.com/pcsbusiness/down ... s_1.16.exe
Smartview for Macs
http://www4.sprint.com/pcsbusiness/down ... c.mpkg.zip
download HTC Sync
http://www.htc.com/us/SupportDownloa...at=3&dl_id=716
2) install the HTC HERO DIAG drivers
http://rs79.rapidshare.com/files/293...AG_Drivers.zip
3)connect your phone via usb cable
4)dial ##diag# (##3424#) on your phone for diag menu, when prompted direct windows to diag drivers listed above
5)run CDMA WORKSHOP, settings at main screen on the right are as follows
com settings (AT mode)
---------------
Port (com#) <--- click port and it should say "HTC DIAG COM PORT"
Baud rate (115200) <--- use this setting
com settings (DM mode)
---------------
Baud rate (115200) <--- use this setting
6) you should now be able to hit <connect> if it was successful you'll see in status bar <connected to com#>
7) now click <read> after a moment all your info will come up on left panel, phone # etc
8) click on security tab change the right panel setting and look for the following block
SPC/User Lock
----------------
Defualt (nv_read) <--- use this setting
9)now click read if done sucessfully you'll see the block below this option flash red and give you a number
10)note the 6 digit number under <SPC/USER LOCK> the one that flashed red, ****this is your MSL number***
***** just an additional warning***** you can REALLY and I mean REALLY screw up your phone if you change one of the settings in those menus if you don't know EXACTLY what you are doing. This isn't for the faint of heart or the random tinkerer.... just be warned
--------------------how to overwrite secondary NAI user name----------------------------------------
this section has been added because of people still reporting login errors
1)download and install qpst 2.7b323
http://rapidshare.com/files/297770360/qpst.zip
2)enter diag mode ##diag#(##3424#)
3)start qpst configuration
4)ensure it detects your phone under "ports" should be listed as FFA/SURF 7600
5)click start clients>service programming
6)highlight selected phone click "ok"
7)bottom right of service programming click "read from phone"
8)enter your MSL from steps above
9)scroll right to M.IP tab
10)select first profile listed as profile 0, should read ESN(hex)[email protected] under NAI
11)click edit, copy contents of NAI, paste contents in TETHERED NAI block (ie ESN(hex)@hcm.sprintpcs.com from profile 0)click ok
12)click write to phone, will give error, nv is read_only, disregard message
13)restart phone, follow steps 1-9 verify change took
14)your done.... get to PAM'ing
** good lord can a mod change the name to CDMA, fat fingers**
Can you fix the download link plssssssssssssssssss
The download links are messed up! Great guide though!
Would this work on the HTC EVO?
jpatterson350 said:
Would this work on the HTC EVO?
Click to expand...
Click to collapse
This is old school - there are apps for tethering now, don't forget you need root.
it's easy to get mobile hotspot free with verizon, i believe it's the same for sprint if knows the setting .... anybody willing to share how to?
http://androidforums.com/samsung-fascinate/208100-tethering-natively.html
##diag#(##3424#) is not work(evo4g).
what to do?
Follow instructions in Blue 1pm est
Step 1: Talk and Text
What you need:
A QPST
B. HTC Diagnostic drivers for the Hero
C A Windows PC with either win7, XP or Vista running in 32 bit mode (64 bit will not work)
e. Cricket's 01039.prl -- get it here
fast PRL change dial ##PRL# and phone will enter prl mode, just browse to your sdcard and select 1039PRL, hit menu to change prl. Phone reboots. now call *228 to activation and program. NOW SKIP TO STEP 2.
step 1 long route
1. Once you have all of the items above installed, go to your number pad on your ERIS and dial ##3424# and hit Call. You will see a screen come up on the ERIS called the "DM Command Service."
2. Now, plug in your phone via the USB and your computer should install the necessary drivers. These will be the drivers mentioned above.
3. Once they are installed, open QPST Configuration, Listed under the QPST Folder on your start menu.
4. Click Ports, then click "Add New Port". You should see a port in the left part of the window. If not, unselect the button that says "Show Serial And USB/QC Diagnostic Ports Only".
5. Select the port and Click OK. There may be several ports, so repeat this process until you see a port where it says "Surf..."
6. Take not of which port says Surf, then open CDMA Workshop. Do not close QPST Configuration yet.
7. On the right side of the window select the same port as was in QPST with the word "Surf..." next to it and click "connect".
8. Click on the Security Tab on the top of the screen and click "Read" under the SPC/User Lock, ensuring that the default setting is listed in the drop-down menu.
9. Select the 6 digit number it generates and copy it.
10. Go back to the QPST Configuration and click on "Start Clients" and click on "Service Programming".
11. It will come up with a window displaying active phones. You should see one, the Surf....(whatever). Select it and click OK.
12. Click "read from phone". It will ask you for an MSL/SPC Code. Paste the 6 digit code you copied earlier and click Ok. In the settings tab you will see a box for the MSL/SPC code. Replace whatever is written in it with six zeros (000000). Click "write to phone". Ignore any errors that occur.
13. Click The CDMA Tab. Under Directory Number enter your 10 digit cricket number.
14. Click The Display Tab and type "Cricket" in the Banner.
15. Click the Roaming Tab and click "Browse" under the Preferred Roaming box.
16. Find and select the 01039.prl that you downloaded.
17. Click Write to Phone on the bottom. Ignore any errors that occur.
18. Unplug phone and dial *228.
Step 2. Setting up Web
What you need:
The same programs and drivers listed above
Anycut.apk-- get it in the android market place VIA Wifi.
1. Connect Phone Via QPST and open Service Programming. (See steps 1-3, 10 above)
2. Once you have begun Programming, click "Read From Phone". It will ask you for an SPC/MSL code. That code should now be six zeros (000000) -see step 12 above.
3. Click M.IP (may be M.IPv6 and set Mobile IP Behavior as MOB + Simp...
4. Select any profiles (there should be 1 or 2) listed under User Profiles, and click edit. Do the following for all profiles.
5. Make sure that "Profile enabled" is checked and enter in the following:
NAI: [email protected]
Tethered NAI: [email protected]
6. Change home address, primary ha, and secondary HA to all zeros.
7. On both HA Shared and AAA Shared Secret, click enter text string and type in the following password (all lower case): cricket
8. click ok
9. Set active user as 0.
10. Click PPP Config
11. The "Um" Button
12. Under user ID enter [email protected] as well as for tethered NAI. If a text box is black with red lines in it, click it and press ctrl D. Enter cricket in the password box.
13.Click "AN" Button and repeat step 12.
14. Click "write to phone". Ignore any errors that occur.
YOUR DONE NOW
NexT Follow instructions from the 3rd post. Below by Token419 to apply cricketmmsweb.zip in recovery for fully functional web/MMS/and apps
15. Install the anycut.apk mentioned above on your HTC ERIS. If you need help with that, pm me and I will explain a few ways to do it.
16. Open Anycut and click New Short Cut.
17. Click Activity and scroll down to Proxy Settings. Select it and Click Ok on the window that comes up.
18. Go to The home screen on your Hero and find the Proxy Settings on your hero.
19. For Hostname enter: wap.mycricket.com and for port enter 8080.
Step 3: MMS!
What you need:
a. Android SDK---
b. Modified Telephony.db --
c. Have Eris phone flashed for talk text and web (see above if you have not done this).
1. Unzip android sdk to a place where you can find it (the shorter the directory name the better as you will soon see. Mine is saved in C:\android
Also unzip the telephony.db into a folder where you can find it. Mine is saved in C:\android
2. In windows xp click start, then run, then type cmd and hit enter. In Vista or windows 7 click start and type cmd in the search and hit enter.
3. Navigate to the folder where you unzipped the Android SDK. If you are not familiar with the command prompt, I will make a list of the commands I enter in blue. The rest you see will be the text that will be generated by the command prompt: CD the directory of adb!!! ex. type cd hit space the drag the tools folder into cmd window. now you can adb push/adb pull etc.
4. Type the Following command
C:\android\tools>adb root
* daemon started successfully *
adbd is running as root
--------------------------------------------------------------------------------------
5. Send the Modified telephony.db to the phone with the following command (keep in mind that you will need to substitute the directory I am using for the one where your telephony.db file is located
C:\android\tools> adb push c:\android\telephony.db /data/data/com.android.providers.telephony/databases/telephony.db
85 KB/s (4096 bytes in 0.046s)
6. Unplug your Phone and hold the power button to turn it off. Turn it back on and there you go!
some roms arent allowing the telephony.db to work giving 245kb/s or any other like 130kb/s.
My advice is if you get one to work, do a Nandroid back up, so you will always have a working web browser and MMS.
Download link 1 Download Link 2
.....space.....
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
As promised here is a zip file containing 2 flashable zips:
One will handle the OS side to get Web/MMS up and running
The other will only do the web portion (Some people don't have good luck with the MMS that i did)
Download from the attachment below, or from here:
http://www.multiupload.com/EKQ8CC27Y9
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
token419 said:
your instructions/title look exactly like brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit also you may want to change the words "hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from cdma ws, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. I simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
as promised here is a single flashable zip that will hande the os side to get web/mms up and running
download from the attachment below or from here:
http://www.multiupload.com/lx7zvgloc2
as always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
so does the same process work for metro pcs and where can i get those files
Should work with any carrier so long as you know the proxy information and apn settings, in my zip you can modify the autostart.sh file and change the port numbers and ip addresses to match your carrier, then you can edit the apn to match your carriers settings as well and you should be good.
Im working on getting one for metro for you all, but i dont have all the info required and iv been busy with work, its really simple to do, i just haven't gotten around to it yet.
token419 said:
Your instructions/title look exactly like Brandonharrison's post on howard forums, if you got the instructions from him it may be nice to give him credit Also you may want to change the words "Hero" to "eris" since this is an eris guide also you can skip the part about spc unlocking from CDMA WS, since the eris comes factory with spc of 000000.
Anyways if your tracking the thread on howard you can update the web portion, to what i posted to get full market and apps working, credit goes to the team at howard forums who worked on getting it working for the motodroid. i simply modified their work so that it would work on the eris.
Feel free to delete everything after step 2 substep 14 and replace with my instructions if you wish, to simplify the process for any new comers. (we are working to get this edited in brandons post over at howard currently since he can no longer edit his post)
As promised here is a single flashable zip that will hande the OS side to get Web/MMS up and running
Download from the attachment below or from here:
http://www.multiupload.com/LX7ZVGLOC2
As always, make a nandroid backup first
download the zip and read the readme inside for instructions
Click to expand...
Click to collapse
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Puxxie said:
Hey the zip file is corrupt. I tried downloading it a few times still the same thing.
Click to expand...
Click to collapse
Sorry about that, i reuploaded the file as well as modified the attatchment.
Use at your own risk, there are 2 flashes inside the zip, one for web and one for Web+mms, some people cant get the MMS to work, works fine for me, but not sure why it doesnt work for others.
Make a nandroid backup first as always and feel free to mod it however you want
You don't need QPST, and it is in fact easier WITHOUT QPST
You don't need Windows Vista or Windows 7 (or windows at all).
Thank you for your contribution for this community.
I posted a thread for full functionality as well, with a different methodology.
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
You don't need QPST, and it is in fact easier WIT
And "flash" is a misnomer. All of the kids who think they're cool "flashing" phones to cricket don't even know what they're saying.
This phone can be all but fully PROGRAMMED for Cricket, and the "flashing" part is just to save you time transferring iptables to the phone.
http://forum.xda-developers.com/showthread.php?t=685165&highlight=cricket
Click to expand...
Click to collapse
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
qpst wont read my phone any thoughts or links?
i tried everything
You don't need, QPST.
Just open up your phone, then dial ##778 (call).
ALL of the settings you need to edit in QPST are available in your phone's built in program, EPST.
bigslanki said:
Your little thread needs some help don't flame in my post.... if your going to create a flash solution. ..please edit it fully like I made an attempt to do. And not just say "follow instructions from HF" that was pretty wack!
Good luck with that inputting on phone feel free to take a look at my fully detailed Motor Droid to cricket in android development thread
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
bigslanki,
No flaming intended. I was being serious when I said thank you for your contribution. All I've done is copied and pasted things from other sources that have worked for me as I've tried them. I should edit it more fully and maintain it better. Thank you for your suggestion.
I haven't used QPST since the days of ##778 on this phone, and I was only suggesting that less tech-savvy people, who may have trouble getting QPST working just right in Windows, might have an easier time without it.
All is well. Thank you, seriously, for your contribution.
What is the newest/easiest way?
Looks like alot of advancements have been made in the last 3 or 4 months to make the process easier. Is this thread still the best way to get an eris setup on Cricket with full functionality?
Please help out a noob! I've read so many posts, tried so may methods...I think I am SOOOOO close! But I just can't get the web/mms working.
Thanks!
Will this work for HTC Incredible? I seem to be stuck. *228 calls cricket but a voice says they can not program my phone. I have tried nearly ALL the prl files for cricket available on the link. I can call 611 from it also and speak to a csr but that was little/no help..
Please change this to hero thanks
Web on Eris
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
EthicsDesign said:
So if my Eris is already activated on Cricket with talk and text, will flashing for web (rooting etc..) de-activate my phone?
Click to expand...
Click to collapse
If you have a 3g indicator in the notification bar of your phone (as long as you have Mobile Network turned on - hold the power button, and turn it on, if it's not on already), then you're ready to flash the web/mms flash.
Flashing the web/mms flash or ANY kind of flash from Recovery will NOT affect your talk/text abilities whatsoever. It can only enhance the ability of your phone to do things.
I recommend flashing the Cricket v10 flash from token419's thread here, then using APN Backup & Restore to backup your APNs, modify them, then Restore them to make MMS work perfectly:
http://forum.xda-developers.com/showthread.php?t=730289
Let me know where you get stuck, if you get stuck.
Here's what I did, exactly, to get my ex-gf's working 100%
http://forum.xda-developers.com/showpost.php?p=7665352&postcount=135
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
EthicsDesign said:
thank you!
I also called a cricket store to ask this quistion, the guy mentioned that after today, cricket will launch there own google android phone, so anyone with a flashed android phone will have to pay the $60 Plan. any idea if this is true?
Click to expand...
Click to collapse
That's not true.
But if you go into the store, and ask for your Android phone to be on Cricket, then yes, you'll have to pay for the plan.
Otherwise, unless they're keeping inventory of customer provided equipment (which they never have before), you're fine.
In their notes they just have 'customer-provided equipment' listed, not HTC Droid Eris.
I wouldn't worry about it. My ex-gf has this going on, so we'll see. Sprint is $69.99 for a better/faster/more reliable network, so if Cricket does this, they might lose out to that, unless people really use the unlimited minutes.
Quick question. I am very new to the android unlocking scene but I have done a good amount of research. Step 1 of this guide shows us how to get text and talk working for cricket (and I'm assuming Metro as long as you load the Metro prl). What I want to know is Step 1 EXACTLY the same as getting MetroFlashed minus adding the esn to Metro's db?
The reason I want to know is because I got my phone MetroFlashed and set up data and mms. The next day I did a hard reset. Contrary to others beliefs doing so put me back on Verizon so I brought it back to be flashed again. Now I'm reading this and would like to know if Step 1 is all I need to do to get back on Metro in the event I need to do another hard reset for whatever reason.