Hi everybody, I have 2 htc genes and in the past I had successfully flashed my rom, but however today when I flashed my rom on my other htc gene, I think the phone is BRICKED!
I downloaded the rom from here and followed the instrucitons on the installation http://forum.xda-developers.com/showthread.php?t=396744
However I think what my mistake was I flashed the SPL and everything else rather than just the ROM. I should have clocked the second link
So here I am, nothing happens when I hold the camaera button and power button it does not go to boot loader
Nothing happens when I hold down the power button
When I click the reset button using my stylus which is next to the USB , the two take call and hangup soft keys blink and THATS IT!
Please someone help me out here!
Thanks in advance
try this
press camera, dont release it, and press reset....maybe this will help.
good luck
No its not working
i think u didn't read Warning at that thread
why u flashed official rom???
ok u can try this
remove battery and then press and hold on/off button for 3 seceond
then put battery back then hold camera button and press on/off button to start device in boot loader mode
if u r getting boot loader plz tell here then we will discuss about further steps
No, its not working I tried it.
The two buttons blink when I hold the camera and the on/off button but nothing happens when I just press the on/off button while holding the camera button.
Please help me out here, its really critical
Thanks for the reply
jaysnanavati said:
No, its not working I tried it.
The two buttons blink when I hold the camera and the on/off button but nothing happens when I just press the on/off button while holding the camera button.
Please help me out here, its really critical
Thanks for the reply
Click to expand...
Click to collapse
i think now only service center can help u
or u have to try j-tag method .
tell me when u are ready with jtag circuit .
Hi,
hmm I might try contacting htc or service center.
What is the j-tag method, I have never herd of j-tag could you help me on that please.
Thanks
jaysnanavati said:
Hi,
hmm I might try contacting htc or service center.
What is the j-tag method, I have never herd of j-tag could you help me on that please.
Thanks
Click to expand...
Click to collapse
search forum
Related
hi guys! i've just bought a used TP Sprint and i've been trying to enter Bootloader mode for hours, but there's no result, the phone just reset when i press and hold Volume Down button and press reset button, it doesn't go to Bootloader mode, anyone have any idea about this, has anyone had this problem before, please help me, thanks you guys a lot!
hey said:
hi guys! i've just bought a used TP Sprint and i've been trying to enter Bootloader mode for hours, but there's no result, the phone just reset when i press and hold Volume Down button and press reset button, it doesn't go to Bootloader mode, anyone have any idea about this, has anyone had this problem before, please help me, thanks you guys a lot!
Click to expand...
Click to collapse
You are in the wrong forum my friend. Try the Raphael CDMA threads.
http://forum.xda-developers.com/forumdisplay.php?f=465
mod can you delete my post, i did it, thanks you
After updating the ROM my device does not turn on, or in BOOT mode try color. Some very knowledgeable can help me?
Device only a Blink red and green buttons.
Grateful
did u followed complete process given on xda GENE forum?
or
u directly flashed ur device...
plz always read instructions carefully..
its time setup funeral! if not boot loader then cant do anything sorry...
Take it to HTC service center!!!
Remove battery for some time and press the power button. After this put back your battery and try to enter in bootloader mode. If the bootloader mode appears, you can flash a rom.
Did u find any resolution on this... i am also facing exact problem. the gene never boot up after upgrade... it just blinks ... can you please help me with the steps u take to resolve this,
Press the camera button and (power button .. most likely ) and use the stylus to reset. You will get the boot loader.
Best of luck.
thank god their are still some helfull guys here
hi
guys i recently seen that their are not many helpful guys here every one seems to have forgotten the help they got and don't really try to help the guys who need help this really made me feel very
but the thanks god u guys are still here and are still helpful this makes me feel very very
knowing u guys for a long time im not one bit surprised but i just felt like saying it
ramersonw said:
Remove battery for some time and press the power button. After this put back your battery and try to enter in bootloader mode. If the bootloader mode appears, you can flash a rom.
Click to expand...
Click to collapse
Addicted2xda said:
Press the camera button and (power button .. most likely ) and use the stylus to reset. You will get the boot loader.
Best of luck.
Click to expand...
Click to collapse
i just did a hard reset to my htc hd2 and then it dowsn't respond
when i try to swich on my phone ,, the htc sense doesn't appear and my phone soesn't respond to any key ,, i cant go into start menu or any thing in my phone
please tell me what should i do
how i can do hard reset again
(
Roushdii said:
i just did a hard reset to my htc hd2 and then it dowsn't respond
when i try to swich on my phone ,, the htc sense doesn't appear and my phone soesn't respond to any key ,, i cant go into start menu or any thing in my phone
please tell me what should i do
how i can do hard reset again
(
Click to expand...
Click to collapse
Witch Rom/Radio you had have before?
Can you get to the BootLouder?
Is your battery bean charged? (verify your battery pins (connections))
kurt-willems said:
Witch Rom/Radio you had have before?
Can you get to the BootLouder?
Is your battery bean charged? (verify your battery pins (connections))
Click to expand...
Click to collapse
Rom 2.5,,
when i turn on my phone it goes properly and then it shows a message '' launching htc sense'' then it no response i mean the screen before the htc sense still not respond and i cant go into start menu or any thing
Roushdii said:
Rom 2.5,,
when i turn on my phone it goes properly and then it shows a message '' launching htc sense'' then it no response i mean the screen before the htc sense still not respond and i cant go into start menu or any thing
Click to expand...
Click to collapse
Rom 2.5 ???
Never mind, try to flash Stock rom again, but first place your device in boot-louder mode. (wile device is turn off, pres and hold volume down button, press shortly on the power button)
Connect your device to your pc, when you see "USB" mention on the bottom of your screen launch the stock rom application by Administrator.
PS Used the stock rom from the HTC website by using your own S/N!!
Try removing both memory card and your sim card and then doing a hard reset.
Switch HD2 off . Hold BOTH up and down volume keys and then power on.
Then volume up to restore
Hope that helps
kurt-willems said:
Rom 2.5 ???
Never mind, try to flash Stock rom again, but first place your device in boot-louder mode. (wile device is turn off, pres and hold volume down button, press shortly on the power button)
Connect your device to your pc, when you see "USB" mention on the bottom of your screen launch the stock rom application by Administrator.
PS Used the stock rom from the HTC website by using your own S/N!!
Click to expand...
Click to collapse
THANKS ,,, but tell me if there is a method to do a hard reset to the phone from my pc ,, it may work
colinm said:
Try removing both memory card and your sim card and then doing a hard reset.
Switch HD2 off . Hold BOTH up and down volume keys and then power on.
Then volume up to restore
Hope that helps
Click to expand...
Click to collapse
thanks very very very very much colinm ,,, your advice worked very well and my phone get worked again
Roushdii said:
thanks very very very very much colinm ,,, your advice worked very well and my phone get worked again
Click to expand...
Click to collapse
Seams you didn't do correctly a Hard reset the first time
Fine to see/read your problem is solved now.
Glad that helped
thanks all for trying to help me
Well, this is my friends phone. Basically it won't turn on, however, when I hit the power, and 2 volume keys at one it says
"Firmware update
Step 1/2
Unpacking
Update failed"
I was going to install a custom ROM, but I can't even get the phone to open on my computer as anything.
Can you please help me?
Friend you can try flashing custom roms using ADT (android download tool) it works 110% for every device in case u need step to step guide post below.
Good luck
YASH......
HIT THANKS IF HELPED
yash.pranjale86 said:
Friend you can try flashing custom roms using ADT (android download tool) it works 110% for every device in case u need step to step guide post below.
Good luck
YASH......
HIT THANKS IF HELPED
Click to expand...
Click to collapse
I would like to do that, but I cant even get it recognized by my computer as a file -_-
And thanks though, you think I could get around that?
Try this maybe it will help to recognize the device
1)install all the USB drivers of ur device
2)power off hold call button and connect USB.
GOOD LUCK
YASH......
If it recognizes post below I will help u in the next step about flashing roms .
HIT THANKS IF HELPED
yash.pranjale86 said:
Try this maybe it will help to recognize the device
1)install all the USB drivers of ur device
2)power off hold call button and connect USB.
GOOD LUCK
YASH......
If it recognizes post below I will help u in the next step about flashing roms .
HIT THANKS IF HELPED
Click to expand...
Click to collapse
Well, I downloaded it from "AT&T Huawei U8652 Fusion Usb driver free software download", downloaded the program, installed the necessary drivers, but it didn't do anything. Did I do it correctly?
DONT SKIP STEP 2, Have u pressed call button while connecting usb cable
it's most important
good luck
yash.....
yash.pranjale86 said:
DONT SKIP STEP 2, Have u pressed call button while connecting usb cable
it's most important
good luck
yash.....
Click to expand...
Click to collapse
Well, I do not know what the call button is, and I have held the power button instead. Anyway, I downloaded the drivers, says it was installed successfully on my computer, however, when I plugged in the phone, it says "Looking for Huawei Drivers, Unsuccessful". So, what am I doing wrong? I think the driver pack is for Windows Vista, and I am running Windows 7?
The button which is exactly on opposite side of power buttion
The button through which we can switch in the dialer menu
When there is an incoming call we can also press the button instead of sliding on screen that is the call button
We can switch incoming calls using call button
I think u might have understood
Pressing power button while connecting USB will not do anything
IF I HELPED DON'T FORGET HITTTIIIING THANKS...........
yash.pranjale86 said:
The button which is exactly on opposite side of power buttion
The button through which we can switch in the dialer menu
When there is an incoming call we can also press the button instead of sliding on screen that is the call button
We can switch incoming calls using call button
I think u might have understood
Pressing power button while connecting USB will not do anything
IF I HELPED DON'T FORGET HITTTIIIING THANKS...........
Click to expand...
Click to collapse
I don't know which button it is. There is one power off button, volume rocker, and the rest are touch capacitive.
epictylerone said:
I don't know which button it is. There is one power off button, volume rocker, and the rest are touch capacitive.
Click to expand...
Click to collapse
Sorry to revive an old thread but I too have a Huawei U8652 phone and I have no idea what he means by call button on opposite side, the power button is on top and is the only button up there.
Team,
i was trying to install some old hacker kernel maybe of MM version accidentaly on my S6 edge Noughat Noble rom, now i am stuck at Creating paths line, not going ahead since hours, neither i am unable to open recovery mode or the other mode, unable to switch off phone as well, kindly help ,,,, emergency.
thanks.
emergency ... unable to swetich off the phone as well ... help .. sos
Just Power + Volume '-' + Home hold it together. When Samsung logo comes then switch fast to 'Volume +' button and also hold it together then will you go to recovery menu.
no dear, its an emergency , i am unable to do anything, i cant even switch off the phone and hence need help for this emergency, show some kindness and plelase help me out from this mess.
rifek4 said:
Just Power + Volume '-' + Home hold it together. When Samsung logo comes then switch fast to 'Volume +' button and also hold it together then will you go to recovery menu.
Click to expand...
Click to collapse
thats the problem dear, tried that when i do it .. it says screenshot saved to device, it is not restarting the phone. What do i do now
npk21 said:
thats the problem dear, tried that when i do it .. it says screenshot saved to device, it is not restarting the phone. What do i do now
Click to expand...
Click to collapse
System is already working or TWRP? Doesn't matter what if you hold power button for 30 sec (something like that, don't remember good) phone must turn-off/turn-on/reboot.
rifek4 said:
System is already working or TWRP? Doesn't matter what if you hold power button for 30 sec (something like that, don't remember good) phone must turn-off/turn-on/reboot.
Click to expand...
Click to collapse
I am on twrp , stuck at kernel installation screen, tried power and volume up and home didnt help , and when i try power and vloume down and home it says screen shot taken, the phone is not restarting at all . cant even switch off the phone.
npk21 said:
I am on twrp , stuck at kernel installation screen, tried power and volume up and home didnt help , and when i try power and vloume down and home it says screen shot taken, the phone is not restarting at all . cant even switch off the phone.
Click to expand...
Click to collapse
Power, Volume DOWN and Home... For longer time (min. 20 sec) not like 5 second.
holy god , you saved it brother, its working now, had to hold the button for 20 secs. thanks i will re install the rom and the kernel in your signature.
thankyou once again, and sorry for creaating new thread, it was an emerggency situation for me,
npk21 said:
holy god , you saved it brother, its working now, had to hold the button for 20 secs. thanks i will re install the rom and the kernel in your signature.
thankyou once again, and sorry for creaating new thread, it was an emerggency situation for me,
Click to expand...
Click to collapse
Just do not panic the next time and look for the answer yourself which is simple