Related
finally i got the most turn off things i faced in 2005 to back me up to 2003 but after i installed 2005 for the 4th time & desided to stick with it untill i either solve the problem or microsoft will post solution
1. Etisalat Settings for mnet & MMS
(everytime you install them they somehow crash the original DB of messaging where you will not be able to open your mesages anymore untill you do a format
2. and most importantly Arabic reading writing
after long time spent to fix those problems i finally got them working, see screen shoots
yeah ok , great but how u fixed the issues ?
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Rabia said:
lol am sorry it was a bit hard, & even worse to explain, i writing down something that might help people around doing it once i find an easy way to make it accesseble to people
Click to expand...
Click to collapse
Post a cab or tell us what you modified in the registry!!!
Waiting, thanks! :?
Oh something else I noticed the radio rom is 1.08.00, can you dump it?
PC) folder, take a copy of your registry after pasting the file & before softreseting the the device, then reset your device, if it will ask you then if you want to run few DLL files acept all of them, then take another copy of your registry & store it in a differant file, now go to your programs & you'll find arabizer file there in which one of them is english name, another one is arabic as '7ayarat & the 3rd one is arabic letters but mirrored in reverse, this will be always your indication if arabic is now working fine, click on this file, it will load couple of other DLLs but will give you some error message about an AOP????? file, don't mind it, now got to your control panel, (Setting) of your mobile & go to the settings Tab, again it will ask you to load some file.cpl say yes, soft reset your device with a software for soft reset not through the pen, then it will load, if you get an error about some file couldn't be loaded just reset few times & it should work, if you lost you signal in gsm, load the first registry file & softreset your mobile again, it will ask you to load some dll file again accept them then go to the settings to load the cpl file, then reset , if this doesn't work load the second resitry file & do the same proccess untill the file with the names reversed is corrected, now enjoy arabic on your system.
اود التنبية على انني لست مسؤلا عن اي مشكلة تطرأ على جهازك و العملية متعبة جدا
PS. if some get this way working for him i please him to put it in a simplified way because unfortunatly i have too little time to spare on rewriting it in an organized way, but once it worked i had to post it here because this is the best site in the world for PPC's & they deserve the best
Thanks mate I'll give a try later on
now that's interesting , thank u
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
guys i heared someone tried it withought backing up the registry & it worked perfectly fine, remaining only is the camera & record button & this should be it for me
i think the camera is the last problem , buttons are working fine 8)
Rabia said:
anyone tried it guys am intrested to know
i think the secret is in the registry integrity & the file loading proccess, if you load the arabic files first after reseting the device they will affect the memory or the gsm loading, specifically the file CPROG.EXE which don't get loaded correctly, actually this is how i found i can fix arabic if i only get it loading after cprog & not before, thats why you put the files manually without the setup file so after you reset the device & when it asks you to load the dll files it will insert it in the registry after loading the cprog not before
Click to expand...
Click to collapse
sadly it didnt work for me,the device kept hangings on the splash screen,I tried it with wireless on and off, i did hard reset 5 times (2 with clear registery option) but nothing worked,I also upgraded to Radio 1.17 but still didnt work,I couldnt find out what's going wrong (I get prompt to overwrite 3 files while copying them into windows folder) WM2005 1.50h, Radio 1.14 then 1.17
well am not sure but regarding the hard reset only do the clear registry hive option without the format,
hi guys!
we are working for the localize Himlaya WM5.0 to Chinese and Japnese.
On the previouse OS, we need Font and registry, and also need wince.nls which support to encoding to our languages.
without replacement wince.nls, the inbox and IE cant encode to ours.
Usual, we got the wince.nls which has our lamguge support from the device of Japanese or chinese, or take from SDK emulator, or make it ourseleves with MS Platform Builder.
Till the version of WM2003se, easy to replce it.
But new OS of WM5.0, replacement of wince.nls can not be effected, even it was replaced firmly. the OS seems to be ignor that!
@On the Himalaya WM5.0, Some version such like 1.6b, 1.6h, 1.6i can get encooding with new wince.nls, but other version of WM5.0, it was not be able...cant find the reason yet.
@On the Blue Angel WM5.0, also it was ignored by OS
@On the Jasjar just we got, also it was ignored..........
We need find some solution of this system which ignore the replacement of wince.nls.
i already work for that more than 5days ........
I think to localize to Alabian, you guys will have same problems.
Example some of you can replace wince.nls, some of you can not get it.
so if you got some information, please exchange it about that, of course we also let you know if we got it!
Thanks guys!
following is our thread about localize to Chinese / Japanese..
You may know what happened on new OS.
http://forum.xda-developers.com/viewtopic.php?t=24781&highlight=
here it is guys
did it
check it out
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
1.6c
yes. I am using WM5 1.60C WWE, I can not replace the wince.nls in rom with new one.
this is again a simplified version of installing arabic in your WM2005, just install both attached cabs in there sequence & everthing should be working fine
PS am not resposible if it crashes your device but so far it haven't crashed min
to Replacement wince.nls
PLS install this cab,
and place your wince.nls onto \Temp folder
then soft reset. you can replace wince.nls
<exactry saying, not relace.enable to read wince.nls from \Temp frolder>
Rabia, what's so different about your arabizer version?
ramram said:
Rabia, what's so different about your arabizer version?
Click to expand...
Click to collapse
its the same as my earlier version but before people comlaint about arabic keyboard not getting installed & the need of using a 3rd party arabic keyboard for it to work, also some people had trouble over writing few files & so HOPFULLY this makes the installation far more easier untill Mr Imaginet company decides to develop a fully intergrated 2005 arabizer
Imaginet already created the arabizer for 5.0, but they didn't release it yet as you can see in the JasJar arabized version, we have a new built of arabizer
drop all files from folder (1) to your windows on your smartphone.
drop all files from folder (2) to your applicaton Data/home on your smartphone.
drop all files from folder (3) to your program files/microsoft. media plyer on your smartphone.
-----------------------------------------------------------------------------------------------------------------
1. replace all file that are allready
2. reset your smatphone trun back on
3. change you theme
3. change your windows media skin
-----------------------------------------------------------------------------------------------------------------
to get your wm5 icons back you'll have to hard reset your smartphone
-----------------------------------------------------------------------------------------------------------------
ONLY FOR QVGA WM5 SMARTPHONE
-----------------------------------------------------------------------------------------------------------------
ok heres windows live and its home sceen
1. install WindowsLive.Smartphone_50_arm.cab
2. dorp WindowsLive.jpg to your windows folder on smartphone
3. drop windowslive.home.xml to your applicaton data/home folder on smartphone
-----------------------------------------------------------------------------------------------------------------
for more help plz go here http://www.pxdxa.com/read.php?tid=36631
and here http://www.pxdxa.com/read.php?tid=36889
anyone tried this yet.
Does doing a hard reset alter the application free settings or anything else, for that matter?
Just checked and Folder 3 is showing empty when I unzip it onto my PC before transfering. Is this correct?
also, having unzipped the files I am also unable to delete the sound file. It tells me one of the files is in use?
Are we sure the Crossbow tweak works on the Monet and that none of these files is corrupted?
Press-E-Dent said:
anyone tried this yet.
Does doing a hard reset alter the application free settings or anything else, for that matter?
Just checked and Folder 3 is showing empty when I unzip it onto my PC before transfering. Is this correct?
also, having unzipped the files I am also unable to delete the sound file. It tells me one of the files is in use?
Are we sure the Crossbow tweak works on the Monet and that none of these files is corrupted?
Click to expand...
Click to collapse
-------------------------------------------------------------------------
ok none of the files are corrupted this dose work on monet as i own one.
it wont hart your phone just make sure you unlock it frist. then install NotSignedOff.cab to your phone
for more help plz go here http://www.pxdxa.com/read.php?tid=36889
and here http://www.pxdxa.com/read.php?tid=36631
Thanks rickwyatt.
Just aout of interest is this Only a 'LOOKS' thing or does it add more useful features?
Perhaps I did it wrong but when I unzip the files I end up with 3 folders (Numbered 1-3) PLUS one called Sounds.
Thanks for the theme
The theme worked in my startrek. But, i don't see the alarm icon on whenever i reboot the phone though i set the alarm on. Any idea?
i have tried this on my monet, the first time i followed the instructions as listed here only to fine the phone hangs making strange noises after the sim code screen.
i have carried out a hard reset on my phone and tried again, this time using only the shelres dll from the first folder, no other dll's but all the other files,
i restarted the phone and it started fine however there was nothing in the start menu - one quick restart and all the new icons are present.
looks lovely
thanks
It also worked great on my Qtek 8500, without any problems at all!
Thank you very much!
EDIT: Well, the alarm icon does disappear when I reboot, but as I had WM2003 before,
I'm kind of used to not see the alarm icon on the homescreen! LoL!
My_Immortal said:
It also worked great on my Qtek 8500, without any problems at all!
Thank you very much!
EDIT: Well, the alarm icon does disappear when I reboot, but as I had WM2003 before,
I'm kind of used to not see the alarm icon on the homescreen! LoL!
Click to expand...
Click to collapse
Plz help me how did you do it. I am using a qtek 8500 and flashed to cingular rom. I tried to install this pack for 3 hours but everytime, phone locks right after sim pin and stupis error sounds keep coming. I can not pass this screen. I have unlocked my phone and installed certificate sşgn patch. can you write what should I do in order. I could not find where is my mistake
hakan439 said:
Plz help me how did you do it. I am using a qtek 8500 and flashed to cingular rom. I tried to install this pack for 3 hours but everytime, phone locks right after sim pin and stupis error sounds keep coming. I can not pass this screen. I have unlocked my phone and installed certificate sşgn patch. can you write what should I do in order. I could not find where is my mistake
Click to expand...
Click to collapse
use this then install the icons
Thanks for your windows live
rickwyatt said:
drop all files from folder (1) to your windows on your smartphone.
drop all files from folder (2) to your applicaton Data/home on your smartphone.
drop all files from folder (3) to your program files/microsoft. media plyer on your smartphone.
-----------------------------------------------------------------------------------------------------------------
1. replace all file that are allready
2. reset your smatphone trun back on
3. change you theme
3. change your windows media skin
-----------------------------------------------------------------------------------------------------------------
to get your wm5 icons back you'll have to hard reset your smartphone
-----------------------------------------------------------------------------------------------------------------
ONLY FOR QVGA WM5 SMARTPHONE
-----------------------------------------------------------------------------------------------------------------
ok heres windows live and its home sceen
1. install WindowsLive.Smartphone_50_arm.cab
2. dorp WindowsLive.jpg to your windows folder on smartphone
3. drop windowslive.home.xml to your applicaton data/home folder on smartphone
-----------------------------------------------------------------------------------------------------------------
for more help plz go here http://www.pxdxa.com/read.php?tid=36631
and here http://www.pxdxa.com/read.php?tid=36889
Click to expand...
Click to collapse
your windows live save my ass.Thanks alot.
hello!
first of all, thanx for this great theme and icons. that's cool !
but, on my samsung i 710, it's impossible to copy the files on my windows folder. my pda says "impossible to replace the ****.dll because your are not autorhised to replace this file"
how could i overpass this problem?
Thanx for your help
Mary
marymure said:
hello!
first of all, thanx for this great theme and icons. that's cool !
but, on my samsung i 710, it's impossible to copy the files on my windows folder. my pda says "impossible to replace the ****.dll because your are not autorhised to replace this file"
how could i overpass this problem?
Thanx for your help
Mary
Click to expand...
Click to collapse
try copying those dll's through ActiveSync
i blockt my phone with this .......what can i do
**** iu block my phone tell me pleasae what can i doi
alexwittmann said:
****** iu block my phone tell me pleasae what can i doi
Click to expand...
Click to collapse
You should do a soft reset on your device.....
alexwittmann said:
**** iu block my phone tell me pleasae what can i doi
Click to expand...
Click to collapse
Hakim Rahman said:
You should do a soft reset on your device.....
Click to expand...
Click to collapse
Watch you language, Swearing will not be tolerated, This is your final warning. Also if you quote somebody then please remove the Swear word.
Hey, could someone please send me a link and explain to me how to install the TouchFLo on my MOGUL? It would be greatly appreciated. Thanks
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Thanks a lot! What extra does the cube add? Thanks
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Oh...sorry 1 more thing, once you download them onto your mogul what do you have to do to get them to work because I have tried something similar before and the files are on my MOGUL but nothing changed in apearance? Thanks again
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
kidnamedAlbert said:
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
Click to expand...
Click to collapse
thanks for the help
no problem
on that video it shows everything being saved to the memory card. How do you do that? because it always just automatically saves all my programs to the main memory? In that video, what is it even doing? Everything is going so fast I can hardly tell what is going on. Thanks
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
does anyone have anymore info? Thanks
dcshoeco024 said:
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
Click to expand...
Click to collapse
did you put the cube files in application data? thats they only way itll work
yea i put them there
this may sound stupid but did you enable touchflo?
what do u mean enable? Like, i downloaded it and it said that it was running.......
I really like Poorlyduck Vista cube
For me a stop having probleme with the WM 6.1 and cube when installing vista-cube .cab that also contain touch flo. I run and older version tha the one ''Vista suite'' I tried hard to make this in OEM package to include in option in DCD kitchen taht i customized a bit but for now i run it from cab version. ...
ok so i followed the instructions and set it up just like the vid, went back to the today screen and no different home screen. I went to choose touch flo, and it pops up as already running. Can someone help me please
I have a new TyTn now, (lost old one), I changed the boot screen too a CIA one i found.
I cant remember how i did it...
I have search put can only find THIS THREAD but that is for a different
model.
Can some one point me to a thread that allows me to change the TyTn boot screen???
Please.
Depends on which boot screen you want to change. There are three of them. First one when you switch on , second when it initiates the gsm and third is windows boot screen. First two you need to create and flash to your device the third is simply called welcomehead.96.png and resides in the windows directory overwrite that file with one of your own thats 240x320 and it will show on startup
is this the image you are referring to
http://forum.xda-developers.com/showpost.php?p=3078867&postcount=14
If thats what you want to have on your hermes
unzip the first attachment then run the ruu_wrapper copy the welcomehead.96 file over to the windows directory if you want to change the windows mobile loading screen too.
If you fancy creating your own use the splashscreenmaker attached, although its for the artemise it works fine on the hermes and wizard too, not sure about other devices. Just make sure the images are 240x320 and no more than 256 colours(well thats what i have found works)
Oh before anyone asks , as i am sure they will, this will not wipe your phone all it does is upgrade the boot screens
Thanks very much
if i had known that the artemise worked i would of used that.....
no problem steve, was that the screen you wanted
sure was buddy
thanks again
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
okay first of all, if your using windows 7 then you dont need activesync. You need "Windows Media Device Centre"
Also, try turning on the phone whilst holding the volume down button. That should take you to bootloader. (3 colour screen).
You should see the word "serial" at the bottom of the screen.
Connect via USB and wait for the drivers to install.
The word "Serial" should then change to "USB".
Then you can flash a ROM via USB. If your phone is network branded then you will need to flash the correct ROM from the HTC site.
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
You need to take that official ROM, rename it from .exe to .zip, and extract the LEOIMG.nbh file. Place this file in the root directory of your SD card and then go into bootloader like before. This will flash the stock ROM onto your device. Make sure the SD card is fairly low capacity, 2 or 4 GB seems to work best, and formatted for fat32.
Good luck!
czarinio said:
Hi, I will describe your problem in a new topic, because I see that it is broader.
Well, on Friday I bought a HTC HD2 wgranym WM 7 Unfortunately, this system will not even suitable to use, so I decided to upload, and in fact you go back to WM 6.5. I found the forum two ways by dropping LEOIMG.nbh file directly to memory card and a second by installing ROM when connected to a PC.
I bought a memory card reader and format the card. I threw the downloaded file from here: Multiupload.com - upload your files to multiple file hosting sites! Do not give it any more with this phone .... Charter installed a phone and pressing the handset, which is used to activate the phone and the VOL DOWN I switched to a mode. First there was a color screen with the specified data to HD2, but then came the white screen that says "loading ..." and nothing happened for an hour. Perhaps this file does not match my HD2, or he do not know.
The second method seemed to me an alternative and downloaded from the official HTC ROM, giving the serial number. Was surprised that it was a ROM for Norway. I do not know well past the phone, so I do not exclude the possibility that the phone is from Norway. I downloaded the ROM, I downloaded the ActiveSync. But I do not know why when you plug the phone activesync can not connect with them. He writes the message "The device was not detected. " I wanted to try and install without ActiveSync, but the installation failed.
I have no strength, like I'm doing everything ok, but I can not fix this for anything WM 7
Sorry for language errors, I used google translate to translate.
Any help thanks in advance.
Click to expand...
Click to collapse
The easiest way to reflash is using SD Card method.
If you dont have HSPL installed, you should only use this SD Card method to flash the Correct Stock ROM.
Download your correct stock ROM (you must be sure about this, in order to avoid failure). Ectract the downloaded correct stock ROM using 7zip or Winrar. Find the file named: RUU_signed.nbh and rename it to : leoimg.nbh. Place/copy that file to the root directory of your micro sd card (using card reader). For better result, before doing that, you may format your sd card to FAT 32, and copy only that file for flashing purposes only.
Now, put your sd card back to the phone. Go into bootloader mode (by pressing volume down and power on buttons at the same time). Follow the onscreen instruction. Dont forget, to charge your batter before flashing.
goodluck
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
czarinio said:
Thank you all for your responses. I still have one request to you. The set did not get the CD with drivers for HD2. Has anyone can link to them? Thank you in advance.
Click to expand...
Click to collapse
The Windows Mobile Devive Center has the drivers for the HD2 in it. So when you download the program and install it to your computer you have the drivers. Go to microsoft.com/getstarted to get the WMDC program.