guys help me out................ i am having htc p3400i & from one of the posting from xda forums i updated my ROM by using <<<<gene_hspl>>>> than my my screen gt blank..................after that i press & hold my camera button & press switch on button...........tri colour screen appeared with SPL information written on it...... after that i am not getting what to do bcoz i hv not installed Mtty1_42.exe on my device it was stored in my storage card in zip file. nw i am not able to get back my mobile in normal condition..... plz help me for your informatio i am attaching the link which i refered <<<<<<<http://forum.xda-developers.com/showthread.php?t=449975 >>>>>> <<<<< http://forum.xda-developers.com/showthread.php?t=506426 >>>>>>
varunjpl.garg said:
guys help me out................ i am having htc p3400i & from one of the posting from xda forums i updated my ROM by using <<<<gene_hspl>>>> than my my screen gt blank..................after that i press & hold my camera button & press switch on button...........tri colour screen appeared with SPL information written on it...... after that i am not getting what to do bcoz i hv not installed Mtty1_42.exe on my device it was stored in my storage card in zip file. nw i am not able to get back my mobile in normal condition..... plz help me for your informatio i am attaching the link which i refered <<<<<<<http://forum.xda-developers.com/showthread.php?t=449975 >>>>>> <<<<< http://forum.xda-developers.com/showthread.php?t=506426 >>>>>>
Click to expand...
Click to collapse
You have to run mtty from the PC.Download it again and follow this guide properly Step by Step Upgrading for GENE
thanks......but!!!!!!!!!!!!!!!!!!!!!!!!!!
mr.harsh said:
You have to run mtty from the PC.Download it again and follow this guide properly Step by Step Upgrading for GENE
Click to expand...
Click to collapse
thnks .............i did as per guide but when i run mitty software & than connect my phone to USB cable "USB" is appearing at lower left corner of my mobile but i am not able to press it.......... & when i wrote <<<set 32 1 >> in mitty window opened in my computer & press enter no respond from my mobile.....so what to do...??????? where i am wrong pls help me ....!!!!!!!
Second thing i am using Windows 7 & as per guide <<<<http://forum.xda-developers.com/showthread.php?t=472169>>>>>> step 3 (3) when i attached "wceusbsh.inf" & press 'ok' error is coming......??????? is the error i mentioned earlier is bcoz of this or there is anything else...???????
varunjpl.garg said:
thnks .............i did as per guide but when i run mitty software & than connect my phone to USB cable "USB" is appearing at lower left corner of my mobile but i am not able to press it.......... & when i wrote <<<set 32 1 >> in mitty window opened in my computer & press enter no respond from my mobile.....so what to do...??????? where i am wrong pls help me ....!!!!!!!
Second thing i am using Windows 7 & as per guide <<<<http://forum.xda-developers.com/showthread.php?t=472169>>>>>> step 3 (3) when i attached "wceusbsh.inf" & press 'ok' error is coming......??????? is the error i mentioned earlier is bcoz of this or there is anything else...???????
Click to expand...
Click to collapse
More details about error??
Bcoz if drivers would not have properly installed then you won't able to do anything else...
detailed error.....!!!!!!!!
mr.harsh said:
More details about error??
Bcoz if drivers would not have properly installed then you won't able to do anything else...
Click to expand...
Click to collapse
As per Guide - for Windows 7 users
Step No. 3(1). Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
>>>>>>>> i am not getting this tab (Mobile devices) on my Lappy.
Step No. 3 (2). On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
Step No. 3 (3). Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
>>>>>>>>> I right click on disk drives & then Update the driver............& same as mentioned but when i attached the "wceusbsh.inf" file & ok it some error is coming "this folder does not contain appropriate application for........."
As per Guide Step No. 5 - for Windows 7
>>>>>>>>> after skipping all these & directly jump to step 5 & run mitty than - i am not able to press the USB button on my phone, secondly when i type set 32 1 on window opened after mitty & press enter there is no response from my phone ...... which is mentioned in Guide.
was this bcoz i am not execute Step 3 (1) or something else????????...!!!!!!!!!!!!!!!!
varunjpl.garg said:
As per Guide - for Windows 7 users
Step No. 3(1). Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
>>>>>>>> i am not getting this tab (Mobile devices) on my Lappy.
Step No. 3 (2). On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
Step No. 3 (3). Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
>>>>>>>>> I right click on disk drives & then Update the driver............& same as mentioned but when i attached the "wceusbsh.inf" file & ok it some error is coming "this folder does not contain appropriate application for........."
As per Guide Step No. 5 - for Windows 7
>>>>>>>>> after skipping all these & directly jump to step 5 & run mitty than - i am not able to press the USB button on my phone, secondly when i type set 32 1 on window opened after mitty & press enter there is no response from my phone ...... which is mentioned in Guide.
was this bcoz i am not execute Step 3 (1) or something else????????...!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Make sure that windows mobile device centre is installed and PC and don't forget to remove SIM card & sdcard (specially the SD card).
Hi,
I've just spent a few hours trying to fix a problem with Kies and Windows 7. I had just used Odin3 and download mode to download a Chainfire kernel onto my GT-I9100, and afterword when I connected my phone Windows 7 would try installing drivers and fail on the MTP driver. I tried a lot of things to fix the problem, the only information I could get on it was an error message "Device Cannot Start (Code 10)".
I had spotted that when connecting my phone in download mode to Odin3 that Windows 7 had detected and installed a driver for "Unknown Device". On a hunch that this driver was causing the issue with connecting after using Odin3 I tried to completely uninstall it.
This is what I did (the first 8 or 9 steps are just to enable Device Manager to show *inactive* device drivers so you can uninstall the Unknown device. I've nicked this these steps from another site since I'm not allowed to link it yet):
1. Go to Control Panel and double click on System. You can also right-click "Computer" on the Start menu (or on the desktop if it's shown there) and choose Properties.
Note: A faster way for opening up the System applet is to press the Windows logo key on your keyboard and then press Pause/Break at the same time.
2. Click on "Advance System Settings" link, and then click on the "Environment Variables" button.
3. In the System Variables section click on the "New" button.
4. In the New System Variable dialog box, under the Variable Name value enter devmgr_show_nonpresent_devices (just copy the value from here and paste it there) and give it a variable value of 1.
Click Ok.
5. In the Environment Variables window notice how the new variable appeared in the System Variables section. Click Ok.
6. In the System Properties window click Ok.
7. Log off and log on.
8. Open Device Manager (Control Panel > System > Hardware > Device Manager).
9. From the View menu click Show Hidden Devices and searched for Unknown Device under Portable Device and USB Devices.
10. Right click the Unknown Device and select to uninstall, making sure to select complete removal of drivers option.
11. Restart the PC.
12. Start Kies without plugging the phone in.
13. Click on Troubleshooting for USB device and continue until it repairs the drivers.
14. Reboot the PC. Open Kies and plugin the phone again and let it reinstall the drivers.
Hope this sheds some light on this pernicious issue.
I have a Kindle Fire that I recently gave to my 9yr old daughter... She likes to play "MineCraft" on it and asked me to get a skin changer for her avatar, Well.... To get new skins I have to root the Kindle fire THAT IS WHAT IM HAVING TROUBLE WITH!!
So, I went to your Kindle fire root web page @ http://forum.xda-developers.com/showthread.php?t=2125628 and did the steps:
1. Turn your Kindle Fire on and swipe down the top bar and tap on More+
2. Goto device and turn on the “allow installation of applications” button (ontop of the reset factory defaults)
3. Go back and then goto Security and turn on the “enable ADB” button
4. On your PC Figure out if you have 32 bit or 64 bit windows running and download the correct versions of java and android sdk below:
5. Download and install Java se7u11 the JDK file. From http://www.oracle.com/technetwork/ja...s-1880260.html. This is needed for the android SDK to work (otherwise ADB wont work). You may have to register and reboot
6. Download android SDK then extract the folder to your desktop and install the (green icon). download from https://developer.android.com/sdk/index.html
7. If you have installed java and the android sdk – you should get the following screen:
8. If SDK manager asks you to install any missing packages (button on bottom right corner) then install them/accept and install
9. Download then extract to desktop and install the Kindle fire ADB Drivers (don’t worry if there’s an error message – Just install Anyway as its an unsigned file. Download from http://forum.xda-developers.com/show....php?t=1893838
10. Open up device manager ie start/control panel/hardware and sound/devices and printers/device manager
11. Turn on your kindle and plug it into the PC
12. Your kindle should be recognised in device manager as Andriod composite adb interface.
13. Download Bin4rysroot from here http://uploaded.net/file/0fpyh5c5
14. download Quemu root from here http://forum.xda-developers.com/show....php?t=1893838
15. Extract both the above files to your C Drive into two new folders and rename the folders Qemu (for quemuroot contents) and Root (forbin4ryroot contents)
16. THE ROOTING PART NOW!!
17. On the Pc goto Start and type in CMD then right click on the CMD icon at the top of the window and select “Run as Administrator” and hit yes if the User Account Control window pops up and a dos window will appear
18. Copy and past (or type this into the window) cd ..\..\Root then hit enter
19. Copy and past (or type this into the window) runme.bat then hit enter
20. When the screen shows an interface, type 1 then hit enter, A lot of errors will show up but that's fine
21. When your kindle shows a "Restore" screen hit restore my data your kindle will restore and reboot (may take some time be patient!)
Ok... I hit "Restore" on the Kindle Fire screen and it rebooted to a black screen with a black background and the lock symbol on it... And THEN... NOTHING
I waited for 30 minutes for it to move on and for cmd prompt to find the device again and it never finds the device, I tried to unlock the Kindle Fire screen and it started wiggin out by flashing the word "Kind Fire" in the back drop and now I cant get it to stop flashing it. It is acting real sluggish also! WHAT DO I DO NEXT???? :highfive:
Please help!
Thank you Very Much
Misslissa699631
As the title says my LG L3 E430 wont boot up. The LG logo appears for a moment, disappears, then reappears with the words Security Error beneath it. It then shuts down
Confession time...Been a long time since I rooted my HTC and jumped straight in to the "how to" below out of boredom I guess!.....
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit
Everything seemed to go as planned until step 8. My PC no longer recognised the phone so I removed SD card and copied Framaroot to it. It was around this time I remembered about bootloader and thought DARN! I've screwed up
Anyway before I get the pleasure of smashing it with a sledge hammer (hated it from day one!) I thought I would ask if there is anyway back from this situation....
It will go into download mode but pc doesn't see it and I cant access it because, as I said, it turns on, Security Error comes up and then it shuts down.
regards
J
belfastjohn said:
As the title says my LG L3 E430 wont boot up. The LG logo appears for a moment, disappears, then reappears with the words Security Error beneath it. It then shuts down
Confession time...Been a long time since I rooted my HTC and jumped straight in to the "how to" below out of boredom I guess!.....
STEPS:
1. Set your device on download mode (shutdown the phone, then press "ON + Volume Down") and connect via USB on your PC
2. Download this file: m eg a.co . n z /#!AgxRTZDA!Z0Ni-g5eg9D-X9YEwVcKCFN8hpYwvbex6YCop5MTqfo (remove spaces, i cant post a entire url for the new users restrictions, sorry)
3. Install MSXML 4.0 SP3 Parser (msxml.msi)
4. Run KDZ_FW_UPD.exe
5. Set "Type" on "3GQTC" and "PoneMode" on "DIAG"
6. Select V10E_00.kdz from the folder that you downloaded
7. Click on "Launch software update" and wait a few minutes
8. After it finished, put Framaroot-1.6.0.apk on your SDcard or Internal memory
9. Autorice external apps on phone options, then use a file explorer to allocate and execute Framaroot, use Gandaf exploit
Everything seemed to go as planned until step 8. My PC no longer recognised the phone so I removed SD card and copied Framaroot to it. It was around this time I remembered about bootloader and thought DARN! I've screwed up
Anyway before I get the pleasure of smashing it with a sledge hammer (hated it from day one!) I thought I would ask if there is anyway back from this situation....
It will go into download mode but pc doesn't see it and I cant access it because, as I said, it turns on, Security Error comes up and then it shuts down.
regards
J
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
also check my thread for bootloader and cwm (NO MORE ERRORS)
Many thanks...worked a treat:good:
Step by Step Guide to Install Windows 11+Bypass TPM 2.0, Secure Boot, and Ram Check
Hello everyone! This guide will explain how you can get a copy of Windows 11 Insider Preview without having to deal with enrolling your Microsoft account via the Windows Insider Program! This is a UUP dump copy of Windows 11 ISO file. You do not need to have a Activated Windows 10 copy to do this! There is a lot of debate and speculation going around dealing with Windows 11 not running on a older PC without TPM 2.0, Secure boot, and 4GB ram. This method / fix is a registry edit that injects bypass code that will overlook TPM, Ram, and Secure Boot into the registry " IF " you get the infamous "Windows 11 cannot be installed on this PC" . This is a temporary fix and I assume this will be patched upon first non-developer release of windows 11 arrives! If you want to use this guide to just get a stand alone copy of Windows 11, go ahead.
How do I get the copy of Windows 11?
1. Open your favorite browser and navigate to
( www.uupdump.net )
2. Click on Dev Channel.
3. Find ( Windows 11 Insider Preview 10.0.22000..51 (co_release) amd64 ) and click the link.
4. Pick your Language.
5. Choose the version of Windows 11 you want to download and DE-select the other versions.
6. On the next page, go ahead and click " Create Download Package "
7. Open the file after it has finished downloading.
8. Open a NEW folder and Navigate to the Local Disk C Folder.
9. Once you are inside Local Disk C, create a NEW folder and name it ( Win11 )
10. Open up the file you downloaded from uupdump again and copy and paste all the files to the brand new folder you created inside the C directory.
11. Run the Windows Command File named ( uup_download_windows )
12. Congrats! Windows 11 is now downloading.... This will take a little bit of time
13. Once the command prompt is done downloading and compiling, you will be prompted to close the command prompt... The Windows 11 ISO file will now be inside the folder you created inside the C Directory.!
Click to expand...
Click to collapse
Now that you have yourself a copy of Windows 11, we can now explore the different options of installing. You can actually take the ISO file and mount it to your PC and install Windows 11 right from your Desktop, you can choose the route of using a USB Drive to install, or you can use a CD but lets be honest.. a CD?
Method #1 USB 8GB / Clean Install
1. Grab another device such as a phone, tablet, or another PC and bring this guide up on that device.
2. Shut Down your PC and boot into your BIOS.
3. Load Setup Defaults and Exit Saving Changes. ( You might have to thumb around for a minute to find some of these options in future steps ).
4. Your PC will restart and Boot into BIOS again.
5. If you have option to Enable TPM, do it. If you don't have this option, do not worry. Continue to the next step...
6. Set the boot mode to UEFI. If you have option for both UEFI and LEGACY, choose UEFI.
7. Enable Secure Boot if you have the option.. If you don't have the ability to change, don't worry. Continue to the next step...
8. Exit BIOS and save changes. Your PC will boot up to OS now.
9. Open your browser and navigate to https://rufus.ie and download.
10. Plug in your USB Drive and open Rufus.
11. Inside Rufus, select your USB drive you want to use for installing Windows 11 and then find the Windows 11 ISO file that you downloaded and let Rufus create the install drive..!
12. Keep your USB Drive plugged into your PC and turn off the power then boot into BIOS again.
13. Find the Boot Menu inside of your BIOS and select the USB drive to boot first.
14. You should boot to the Windows Installer now. Choose your Language and continue.
15. Select " I don't have product key " and continue.
OK, so If you made it to this point and you are faced with the message of " Windows 11 cant be installed on this computer " don't freak. This portion of the guide is only for the people who are stuck with the message above.. If you don't see this message, continue to step #16 please..!
How do I Bypass the Windows 11 TPM 2.0, Ram, and Secure Boot check?
1. Open the Command Prompt by pressing SHIFT and F10 Key at the same time..
2. Now type " Notepad " inside of the CMD and press enter.
3. Now copy and paste or type out the following text once the notepad loads in...
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\Setup\LabConfig]
"BypassTPMCheck"=dword:00000001
"BypassSecureBootCheck"=dword:00000001
4. Now, click on file at the top left and select save as and click on This PC and find the USB drive or any other internal drive and make sure to click save as type (all files) at the bottom of the window and name the file
" Bypass TPM, Secure Boot & RAM Check.reg " then click on save.
( When you save this file, make sure you are able to access again. I don't care where you save it but it needs to be accessible )
5. Once you saved, click on file again, click on This PC, and browse to the registry file you just created. Once you are in the directory where the registry file was saved, find the drop down menu at the bottom and select All Files again and you will see the newly created Bypass registry file you created.
6. Right click on the Bypass Registry file and choose the " Merge " option and click OK on the following prompts then close all the windows except the install window. Click the back arrow button inside the install window, and continue the setup from step #15 please.
16. Select Windows Version you want and click next.
17. Accept the EULA and continue... Now you select Custom Install and you will see all of your drives on your computer. With this being a clean install, we will want to delete each drive partitions ( Make sure you double check what you are deleting and understand whats happening ), then click on Unallocated space and click next.
18. Now, Windows 11 will install and you go about your way!
Click to expand...
Click to collapse
Method #2 : Install inside of Windows 10 OS
1. Make sure you already have followed the steps to download a copy of Windows 11 before we continue.
2. Right click on the Windows 11 ISO file inside of the ( Win11 ) folder and click mount.
3. Navigate to This PC and you will see a DVD Drive named ( CPRA_X64FRE_EN-US_DV5 ) . This is the Windows 11 ISO file mounted to your system now.
4. Open up the Local Disk C directory and create a new folder named ( Win11Install )
5. Go back to where the ( CPRA_X64FRE_EN-US_DV5 ) mounted drive is, right click, and open the folder. Copy and paste all files into the new ( Win11Install ) folder you created inside of the Local Disk C directory.
6. Once the files are done copying into the ( Win11Install ) folder, open the folder, right click setup.exe, and run as administrator.
7. Installer will open, It will say " Checking for Update & Checking your PC "
Intermission
Some of you will slide through with no issues and others will be faced with
" Windows 11 can't be installed on this PC "
If you receive this message, the installer will tell you what you are missing
TPM 2.0, Secure Boot, or RAM Requirements
If you don't see this message, continue onto step #8 please...
My computer is telling me I don't meet the requirements!
What do I do?1. Open your browser and go to the following link. MEGA Download Link
2. Once downloaded, find the file, extract to your desktop or wherever you like.
3. Open the ( Win11Install ) folder located inside the Local Disk C directory, find the sources folder and open that.
4. Once you are inside the sources folder, you will need to replace the old " appraiserres.dll " with the new one you just downloaded.
5. Copy the new .dll file and paste into the sources folder. You will get a message asking to replace and replace file in destination.
6. Close all folder and right click on Desktop and refresh the system.
7. Open up folder and navigate to This PC and EJECT the Windows 11 ISO file.
8. Now open Local Disk C directory and navigate once more to the ( Win11Install ) folder, open, and right click setup.exe & run as administrator.
8. Continue to follow the installer and Install!! Everything is straight forward from here as long as you know how to use a PC
Click to expand...
Click to collapse
Windows 11 Drivers
1. Navigate to setting and select Update and Security.
2. Click on check for updates
3. Look under where the pending update are and you will see the option to view addition updates... Click..
4. There will be an arrow point towards Driver Updates.. Click...
5. Choose all the drivers you want to update, let them download, and restart your pc.Cheers
Click to expand...
Click to collapse
One more thing to keep in mind everyone...Windows 11 is obviously in Developer mode and Microsoft will be pushing these cumulative updates out frequently. Hopefully we will be getting a new solid build soon and I will adjust the means of upgrading to them if needed.For now, these are the 2 best ways to use Windows 11 if you don't choose to enroll in the Windows Insider Program, don't have a genuine copy of Windows 10, and/or your PC doesn't meet the new" Requirements" for TPM 2.0, Ram Check, and Secure Boot Microsoft has laid upon everyone...
Good Day
R U damn sure that Windows 11 being installed this way will be fast on PC's with less than 4GB of ram?
Finally! Installed without issue. My machine meet all the requirements except for the cpu, which is a intel 6th gen.
WZ_DroidMaster said:
R U damn sure that Windows 11 being installed this way will be fast on PC's with less than 4GB of ram?
Click to expand...
Click to collapse
OK so I can't promise it will be buttery smooth...
This is a developer build and there is more updates to come soon!
This method will ensure you can run the OS thanks to the registry edit
Let me know how it runs
UncolourTV said:
Finally! Installed without issue. My machine meet all the requirements except for the cpu, which is a intel 6th gen.
Click to expand...
Click to collapse
Glad to hear. I will be updating this post with new methods and different ways to install Windows 11 also
UncolourTV said:
Finally! Installed without issue. My machine meet all the requirements except for the cpu, which is a intel 6th gen.
Click to expand...
Click to collapse
I asked this question, bcoz I m running windows 10 on a first gen core i3 330M, and had a doubt whether it cud handle windows 11 or not
WZ_DroidMaster said:
I asked this question, bcoz I m running windows 10 on a first gen core i3 330M, and had a doubt whether it cud handle windows 11 or not
Click to expand...
Click to collapse
I understand what you mean..
Depending on how big of a HDD you have, I could make a step by step guide on how to dual boot Win10 and Win11 if you want to try it out. And another thing is that Windows 11 is in Developer Mode now so there will be things that don't seem as good and polished quite yet
You can run it no problem but I cant promise you it will be everything you hope a dream about
What about the beta build released hours ago?
BitcoinMineAds said:
What about the beta build released hours ago?
Click to expand...
Click to collapse
I need to update this. This was posted when the windows 11 build was leaked
Install at window 11 because I need them more flexible work and advance because I am running a beauty salon so that's why I need a best features best colours and best camera also so that's why I am shoes in window 11 and system change call operation of of
Nameless Foe said:
OK so I can't promise it will be buttery smooth...
This is a developer build and there is more updates to come soon!
This method will ensure you can run the OS thanks to the registry edit
Let me know how it runs
Click to expand...
Click to collapse
I got the message this pc can’t run Windows 11. Said not the right processor. No TPM. No legacy boot. Wrong motherboard. I am using SDD drive for Windows. I know this can cause installation issues with Windows. Usually there is a serial boot driver for Windows.Swapped with the Mega file. Then followed the steps given. Message was gone. Windows installer completed the check up then asked how to install. I chose to keep all files and apps. The install began. After a few seconds pop up said install failed. Progress never changed. Stayed at 0. Is there an explanation for this?
win Health check says i cant run win 11, but when i go to system - about this is what i see.
Edition Windows 11 Home
Version 21H2
Installed on 06/30/2021
OS build 22000.258
Experience Windows Feature Experience Pack 1000.22000.258.0
Im totally at a loss. 2600k on a H70 PP, 16 gb ram, evga gtx1060 6gb which they say won't run it, but proof is in the pudding. It runs fine better than 10 did for sure.