guys help me out................ i am having htc p3400i & from one of the posting from xda forums i updated my ROM by using <<<<gene_hspl>>>> than my my screen gt blank..................after that i press & hold my camera button & press switch on button...........tri colour screen appeared with SPL information written on it...... after that i am not getting what to do bcoz i hv not installed Mtty1_42.exe on my device it was stored in my storage card in zip file. nw i am not able to get back my mobile in normal condition..... plz help me for your informatio i am attaching the link which i refered <<<<<<<http://forum.xda-developers.com/showthread.php?t=449975 >>>>>> <<<<< http://forum.xda-developers.com/showthread.php?t=506426 >>>>>>
varunjpl.garg said:
guys help me out................ i am having htc p3400i & from one of the posting from xda forums i updated my ROM by using <<<<gene_hspl>>>> than my my screen gt blank..................after that i press & hold my camera button & press switch on button...........tri colour screen appeared with SPL information written on it...... after that i am not getting what to do bcoz i hv not installed Mtty1_42.exe on my device it was stored in my storage card in zip file. nw i am not able to get back my mobile in normal condition..... plz help me for your informatio i am attaching the link which i refered <<<<<<<http://forum.xda-developers.com/showthread.php?t=449975 >>>>>> <<<<< http://forum.xda-developers.com/showthread.php?t=506426 >>>>>>
Click to expand...
Click to collapse
You have to run mtty from the PC.Download it again and follow this guide properly Step by Step Upgrading for GENE
thanks......but!!!!!!!!!!!!!!!!!!!!!!!!!!
mr.harsh said:
You have to run mtty from the PC.Download it again and follow this guide properly Step by Step Upgrading for GENE
Click to expand...
Click to collapse
thnks .............i did as per guide but when i run mitty software & than connect my phone to USB cable "USB" is appearing at lower left corner of my mobile but i am not able to press it.......... & when i wrote <<<set 32 1 >> in mitty window opened in my computer & press enter no respond from my mobile.....so what to do...??????? where i am wrong pls help me ....!!!!!!!
Second thing i am using Windows 7 & as per guide <<<<http://forum.xda-developers.com/showthread.php?t=472169>>>>>> step 3 (3) when i attached "wceusbsh.inf" & press 'ok' error is coming......??????? is the error i mentioned earlier is bcoz of this or there is anything else...???????
varunjpl.garg said:
thnks .............i did as per guide but when i run mitty software & than connect my phone to USB cable "USB" is appearing at lower left corner of my mobile but i am not able to press it.......... & when i wrote <<<set 32 1 >> in mitty window opened in my computer & press enter no respond from my mobile.....so what to do...??????? where i am wrong pls help me ....!!!!!!!
Second thing i am using Windows 7 & as per guide <<<<http://forum.xda-developers.com/showthread.php?t=472169>>>>>> step 3 (3) when i attached "wceusbsh.inf" & press 'ok' error is coming......??????? is the error i mentioned earlier is bcoz of this or there is anything else...???????
Click to expand...
Click to collapse
More details about error??
Bcoz if drivers would not have properly installed then you won't able to do anything else...
detailed error.....!!!!!!!!
mr.harsh said:
More details about error??
Bcoz if drivers would not have properly installed then you won't able to do anything else...
Click to expand...
Click to collapse
As per Guide - for Windows 7 users
Step No. 3(1). Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
>>>>>>>> i am not getting this tab (Mobile devices) on my Lappy.
Step No. 3 (2). On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
Step No. 3 (3). Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
>>>>>>>>> I right click on disk drives & then Update the driver............& same as mentioned but when i attached the "wceusbsh.inf" file & ok it some error is coming "this folder does not contain appropriate application for........."
As per Guide Step No. 5 - for Windows 7
>>>>>>>>> after skipping all these & directly jump to step 5 & run mitty than - i am not able to press the USB button on my phone, secondly when i type set 32 1 on window opened after mitty & press enter there is no response from my phone ...... which is mentioned in Guide.
was this bcoz i am not execute Step 3 (1) or something else????????...!!!!!!!!!!!!!!!!
varunjpl.garg said:
As per Guide - for Windows 7 users
Step No. 3(1). Go to desktop, right click Computer, and select Manage. Go to Device Manager. Now under the section Mobile Devices, Double Click : Smartphone USB Sync.
>>>>>>>> i am not getting this tab (Mobile devices) on my Lappy.
Step No. 3 (2). On the Drivers tab, click "Update Driver..." button. On next screen click : "Browse my computer for driver software".
Step No. 3 (3). Click : "Let me pick from a list of device drivers on my computers". Click "Have Disk.." on next screen. Click "Browse..." and go to the folder extracted in step 1. There, go to USBDriverforActiveSyncVista folder. Here select the file "wceusbsh.inf" and click OK.
>>>>>>>>> I right click on disk drives & then Update the driver............& same as mentioned but when i attached the "wceusbsh.inf" file & ok it some error is coming "this folder does not contain appropriate application for........."
As per Guide Step No. 5 - for Windows 7
>>>>>>>>> after skipping all these & directly jump to step 5 & run mitty than - i am not able to press the USB button on my phone, secondly when i type set 32 1 on window opened after mitty & press enter there is no response from my phone ...... which is mentioned in Guide.
was this bcoz i am not execute Step 3 (1) or something else????????...!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Make sure that windows mobile device centre is installed and PC and don't forget to remove SIM card & sdcard (specially the SD card).
Related
This tutorial is for who have problem No GSM, device hangs on startup or black screen after startup animation. Just follow the procedure;
1. Download Visual Studio 2005 and Microsoft Windows CE 6.0 Embedded.
2. Click setup.exe and choose to install Visual Studio 2005 Professinal.
3. Now install Microsoft Winows Embedded CE 6.0
4. Disable USB connection in Microsoft Active Sync.
5. Open Visual Studio 2005, first time it will ask for default environment, select Visual C++.
6. Select File > New > Project
7. Select Platform Builder for CE 6.0, click OK.
8. Design Wizard will come up. Click Next
9. Select Device Emulator: ARMV4I, Click Next.
10. Select Custome Device, click Next.
11. Now Click next, next , next .... , leave all the boxes blank and finish the wizard.
12. Click Build > Copy files to release Directory
13. Again Click Build > Make Run-Time Image
14. Click Build > Open Release Directory in Build Window
now notice the path (its like C:\WINCE600\OSDEsigns\OSDesign1\OSDesign1\ReDir\DeviceEmulator_ARMV4I_Debug) and open the folder manually from Windows Explorer.
15. Copy nk.bin , ril.dll , rilgsm.dll , serial_cmd.dll , stk_service.dll to that folder (see attachment for the dll's and bin)
16. Now go to Target > Connectivity Options and set like below
Download=Emulator (set to 256MB)
Transport=Usb
Debug=None
17. Now open your phone in KITL mode (COM MANAGER + POWER) and attach to PC USB.
18. Click Target > Attach Device
Process will start, wait around 2-3 min and you will see your device run up (do calibration if need but don't remove USB cable)
19. I tell you again don't remove usb cable at this stage, otherwise your device will hang up and you have to do the whole process again.
20. Now copy SSPL_HERM.exe in a MMC and insert that to device, go to File Explorer and execute that. Device will go to tri-color boot screen.
21. Now Flash RUU_Radinly_1.27.00.00.exe, it will take some minutes so be patient.
Your phone is unbricked.
this procedure is also for No GSM, but the device run the OS, but when i try to update only GSM radio ROM it stucks on 0%.. i think not!??!
What about no GPRS
Is there a possibility this could fix a problem where i can make phonecalls ok but cannot connect to gprs/3g/edge? (i have posted about this recently.):
http://forum.xda-developers.com/showthread.php?t=611014
very usefull this new guide since win ce 5 not avaible anymore on microsoft site. thx for your work
can't make it KITL mode (COM MANAGER + POWER)
any screen shuts or other help pls. thx
in bootmode or windows splash screen the result is the same: "invalid or missing ROM".
I waited at list 15 min each time
Which button is com manager ?
Thanx !
Please tell me which button is com manager !
Thanx !
See right side, in the middle.
13. Again Click Build > Make Run-Time Image
receive an error when making img. !
can't pass this point. Any help!!!
i can't download Windows CE 6.0 Embedded. who can share link for me? please!!!
thanks!!!!!
you know wich ...
you know wich rom have KITL?...
Request
It would be a great Help if you could upload the Run-Time image that is made in step 13.
13. Again Click Build > Make Run-Time Image
Click to expand...
Click to collapse
I am having problems with this step.
How to install adb windows 8
From what I've read a few members were having troubles installing adb on Windows 8 dev Preview-64bit
I have it installed and running and thought I'd share how I did it.
I take no responsibility if you screw up your phone. "IF YOU DON'T KNOW WHAT THIS GUIDE IS FOR OR HOW TO USE IT PLEASE DON'T".
Ive linked a zip file containg the adb drivers,the java.exe,the android-sdk and the easytether.exe
I take no credit whatsoever for the htc/android driver I downloaded them from here
http://forum.xda-developers.com/showthread.php?t=1514942
Thanks to xda member "1wayjonny" please hit the thread up and give thanks to him for all his hard work.
There are alot of other methods to get adb installed on windows8 this is just how I did it.
Laie1472 link
http://db.tt/z5avjkJS
Here we go
Download the zip attatched to the link.
#1-Extract the "laie1472.zip" to your desktop or folder of choice.
#2-Extract the "universal zip" into the same folder.
Now install the jdk-6u22-windows-i586.exe if your running an intel i5 if not then download the correct java version from here-
http://www.oracle.com/technetwork/java/javase/downloads/index.html
and let it run that's all for the java.
Second extract the android-sdk_r07-windows.zip to your c:\ drive.
Meaning right click on the android sdk and choose extract.
A window will appear. In the address bar of that window is were the files will currently be extracted to. Please delete everything in the address bar except the c:\ Then click "ok" and close the window.
Then go to your start menu and click on it. From there go to computer and click on it. Then you will see an icon that says (c That's your hard drive were you extracted the android sdk. Click/Double click on this icon. From there you should see a folder named Android-sdk something something, Right click on this folder and rename it to "AndroidSDK" without the quotes.
Please rename the folder exactly as I wrote it capitol letters and all.
Next make sure that you have usb debuggin enabled on your phone. If you can't find this, "PLEASE STOP UNTIL YOU DO"
Now run the easytether.exe "free app included in the zip" file and when it opens up it will give you an option of Easy tether core or Android USB drivers. Please choose the Android USB drivers. But "STOP" and click the little arrow next to ANDROID USB DRIVERS. A menu will appear. When it does please choose ENTIRE FEATURE WILL BE INSTALLED ON C:\ DRIVE. Check that option as well. Click install and let it finish.
Now please REBOOT your Laptop/Desktop.
When your pc/laptop is up and running, plug your phone into your pc while powered on and choose "charge Mode only".
Then select the windows key on the keyboard
Then select "control Panel"
Then select "more settings"
Then select "device Manger"
Once your there look for the ""ADB DRIVER" or while in device manger unplug your phone from your pc and then plug it back in and choose "charge only" and watch for the device driver that shows up.
Then "right click" and choose "update driver"
Then select
"browse MY Computer for driver software"
Then select
"let me pick from a list of device drivers on my computer"
Then a window will appear.
Then select
"Next" from the top of the window.
Then select
"Have DISK"
Now when that window opens select "browse"
Then another window will appear.
Now at the top of the window you will see an "address bar" with a "down arrow next to it".
Select the "down arrow" and then a drop down list will appear.
From here browse to your desktop or where ever you extracted the laie1472.zip to and find the universal folder.
Then select the driver
"android_winusb.inf" and select "open".
Another window will appear and then select "OK"
Windows will prompt you to install the driver, also it will warn you that the driver is not signed but press install anyway.
When that is done close out all windows and unplug your phone.
Now restart your laptop/pc. You can do this by holding the window key and press the letter "R"
Now type "cmd" and press enter.
Now a command window will appear, in that window type this or copy and paste it
shutdown /s
Then press enter. Another window will appear saying that windows will shutdown in 60 seconds press ok.
Then type
exit
Then press enter and wait.
When your pc/laptop is back up and running plug your phone into your laptop/pc and choose charge only.
Then hold the window key and press the letter "R"
Now type "cmd" amd press enter.
When that command window appears. Type this command or copy and paste it.
cd\
then hit enter
Now type cd\AndroidSDK\tools\
Then hit enter
Now type
adb devices
You "should" see a bunch of numbers
Those numbers. Represent your phone.
Now type
adb shell
Then hit enter on your keyboard.
You should see the # sign. That means you have adb installed. To test it just type reboot recovery and it should reboot your phone into your current recovery. From there you got it.
I hope this helps anyone who was having a hard time getting adb to work on windows 8 Developers Preview64-bit. I have not tested this on the latest windows release or the 32bit verison but your welcome to and leave feedback if your successful to help the community.
This is For the HTC EVO 3d-CDMA, it may or may not work for the GSM version or the evo4g CDMA,GSM.
PLease take into mind that this guide may or may not work for you. Some will have no problems with this guide while others may or may not experince difficulties.
This Guide is in no way 100% guaranteed to work for all. Please refarin from posting negative feedback if it does'nt, how ever I would encourage postive feedback.
I will attempt to maintain this thread and help out any members who decide to use this guide.
Edit if you need help installing adb on ubuntu see my thread here
http://forum.xda-developers.com/showthread.php?t=794624
If you need help installing adb on windows 7-32,64bit,Vista-32,64bit or Xp-32,64bit see my thread here
http://forum.xda-developers.com/showthread.php?t=858118
Also the sdk I included is the older version, I haven't tried with the latest one. If you do please post if your successful to benefit the community. Also the path to the tools folder will change with the latest sdk, the command should be
c:\AndroidSDK\platform-tools\
This is not for development only for adb. You have to download the development platforms via adb tools.exe to do development.
Hope this helps.
Root-Hack_Mod*Always\
Thanks man. You saved me to downgrade my windows.
No prob glad it worked for you.
Root-Hack_Mod*Always\
laie1472 said:
No prob glad it worked for you.
Root-Hack_Mod*Always\
Click to expand...
Click to collapse
Check your pm
Sent from my PG86100 using XDA
Nice guide man...
How did yiu get easy tether to install it keeps erorring out on Me
Sent from my htc_shooter using Tapatalk 2 Beta-6
What part does it error out on ?? And are you running the 64bit ver ??
#Root-Hack_Mod*Always\
shizkoff777 said:
Check your pm
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Got it thanks man.
#Root-Hack_Mod*Always\
PMGRANDS said:
Nice guide man...
Click to expand...
Click to collapse
Thanks pm
#Root-Hack_Mod*Always\
laie1472 said:
What part does it error out on ?? And are you running the 64bit ver ??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
i got abd installed although easy tether didnt work, you should add to your guide to disable driver signature enforcement then it installs with out issue and without easy tether
Well you never posted what error you received so I'm taking it as user error or its your setup. I've used that easytether exe more than enough times to know it works. I've used it on all of my 64bit os's including Vista, and 7-64bit. Also I've had that exact same exe posted on my other guide for adb on 7 and I've never had anyone post that the drivers wouldn't install. Also I've received numerous of pm's saying thanks for the guide and no one but you have posted that the easytether drivers didn't install. So if you want to figure out why they wouldn't install I'm cool with that pm me or post here but I won't change the guide because imo its one of easiest methods of installing adb and it works if done correctly.
#Root-Hack_Mod*Always\
laie1472 said:
Well you never posted what error you received so I'm taking it as user error or its your setup. I've used that easytether exe more than enough times to know it works. I've used it on all of my 64bit os's including Vista, and 7-64bit. Also I've had that exact same exe posted on my other guide for adb on 7 and I've never had anyone post that the drivers wouldn't install. Also I've received numerous of pm's saying thanks for the guide and no one but you have posted that the easytether drivers didn't install. So if you want to figure out why they wouldn't install I'm cool with that pm me or post here but I won't change the guide because imo its one of easiest methods of installing adb and it works if done correctly.
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
can you update your links? much appreciated
hey laie1472 thank you so much for the guide , but please can u fix the dropbox link for the laie1472.zip thanks in advance craig
Hello. Anyone got the updated links or files for download... I'd appreciate it.
Link is fixed.
\Root-Hack_Mod*Always=LTE
craigmoly said:
hey laie1472 thank you so much for the guide , but please can u fix the dropbox link for the laie1472.zip thanks in advance craig
Click to expand...
Click to collapse
Link is up.
\Root-Hack_Mod*Always=LTE
First i wanna say thanks to Whosdaman for the steps to pull a prl from a device and how to push it. Also to my mom who let me unlock her device and made her loose all her **** and for not yelling at me.
People have been having data issues with PRL 21090 so i decided to make a guide to show you how to downgrade your PRL to 21089.
Content Needed
Installed 2.17 ROM (ICS ROM's might work as well/ Not sure)
Downgrade-PRL.zip
MSL number you can use MSL Reader to find it.
HTC DIAG 64bit Drivers The once in the folder do not work
1.) Extract Downgrade-PRL.zip and also.
There should be 4 files. Extract the 3 zip/rar files.
2.) Install "QPST_2.7_362" There will be a setup.exe file inside the folder.
3.) Connect your device and disable debugging on your device. Type the following codes on your phone.
HTC EVO 3D: ##3424#
Your computer should start updating drivers.
Make sure none fail. (HTC DIAG might fail as it did to me)
4.) You can skip this step if HTC DIAG was successfully installed.
Go to Control Panel.
Device Manager
Find the device that you are trying to install a driver for.
Right Click
Update Driver Software
Browse my computer for driver software
Browse to where you extracted the "HTC DIAG Drivers 32-bit" folder
Press Okay.
The driver will be installed.
Note- Installing instructions for 64 bit are located on the second post.
Click to expand...
Click to collapse
5.)
Copied from Whosdaman Thread
Open QPST Configuration in the "QPST" folder under Programs
Disable debugging on your device
Type one of the following codes in you respected device's dialer and switch to "CP" or "Modem"
HTC EVO 3D: ##3424#
Plug in your device
Click on the “Ports” tab and “Add a new port”
Select the “COMXX – USB\QC Diagnostic” and click ok. If you don’t see a port, uncheck the box for "Show Serial and USB/QC Diagnostic ports only" and add all of the USB/Unknown ports. One of them should show an active phone.
Click “Start Clients” on the top of the program and open Service Programming
Select your device
Click "Read from Phone" and enter your MSL
Click the "Roam" tab
Click "Browse" and select the PRL you wish to use
Click "Write to Phone"
Phone should reboot with the PRL you specified
If everything was done correctly you should now be back on PRL 21089
any issues you have please let me know as i will try to help as much as i can.
Thanks clankfu
Here is the solution for when windows 7 x64 htc diag drivers wont install right:
1. Download this file: HTC Diag Drivers
2. Extract contents to a location you will be able to browse to easily
3. Open Device Manager from the control panel.
4. Put your phone into diag mode so that the computer tries to load the HTC Diag Drivers.
5. Right click on HTC DIAG and select properties
6. Click the "Update Driver" button
7. Select "Browse my computer for driver software" option
8. Select "Let me pick from a list of device drivers on my computer" (VERY IMPORTANT, Don't use the browse button here)
9. Select "Show All Devices" from the list and click "Next"
10. Select "Have Disk" Button
11. Now click "Browse" Button and browse to were you extracted the above files....and find the HtcUsbMdmV64.inf file.
12. Select it and select Open.
13. Click OK.
14. In the window you should see HTC USB Modem, Select it and click "Next"
15. Select "Yes" should you get a popup
Driver will install and you should be good to go!!!
Thank you sir.
There already is a guid to qpst its in the 1st post of the prl information project thingy post if anyone would benefit from that one better
Sent from my PG86100 using xda premium
It would be better if u also upload the 21089 prl so people don't have to find them themselves
Sent from my PG86100 using xda premium
kickyoace said:
It would be better if u also upload the 21089 prl so people don't have to find them themselves
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
It's in his zip file.
---------- Post added at 04:09 PM ---------- Previous post was at 03:58 PM ----------
So my HTC DIAG drive install failed and when I went to Device Manager and try to update it myself with the experiment 64-bit folder, it says "Windows could not find driver software for your device".
Ok nvm I really haven't been reading everything lately sowwy
Sent from my PG86100 using xda premium
clankfu said:
It's in his zip file.
---------- Post added at 04:09 PM ---------- Previous post was at 03:58 PM ----------
So my HTC DIAG drive install failed and when I went to Device Manager and try to update it myself with the experiment 64-bit folder, it says "Windows could not find driver software for your device".
Click to expand...
Click to collapse
U have to right click on computer and go to device manager while in diag mode and right click on your phone I forgot what it calls it but right click on that and update drivers select I have disk and go through till u find where it asks u to find the file and then it should install right thanks if this helped any
Sent from my PG86100 using xda premium
kickyoace said:
U have to right click on computer and go to device manager while in diag mode and right click on your phone I forgot what it calls it but right click on that and update drivers select I have disk and go through till u find where it asks u to find the file and then it should install right thanks if this helped any
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Yea, this post helped me finally install the HTC DIAG drivers for 64-bit:
http://forum.xda-developers.com/showpost.php?p=15147781&postcount=11
Here is the solution for when windows 7 x64 htc diag drivers wont install right:
1. Download this file: HTC Diag Drivers
2. Extract contents to a location you will be able to browse to easily
3. Open Device Manager from the control panel.
4. Put your phone into diag mode so that the computer tries to load the HTC Diag Drivers.
5. Right click on HTC DIAG and select properties
6. Click the "Update Driver" button
7. Select "Browse my computer for driver software" option
8. Select "Let me pick from a list of device drivers on my computer" (VERY IMPORTANT, Don't use the browse button here)
9. Select "Show All Devices" from the list and click "Next"
10. Select "Have Disk" Button
11. Now click "Browse" Button and browse to were you extracted the above files....and find the HtcUsbMdmV64.inf file.
12. Select it and select Open.
13. Click OK.
14. In the window you should see HTC USB Modem, Select it and click "Next"
15. Select "Yes" should you get a popup
Driver will install and you should be good to go!!!
Let me know if that works....(it should because I am running the same file as you are on win7x64)
Click to expand...
Click to collapse
Glad I could help
And this is my 100th POST!!!!!!!_!_!!!!!!!! YEAH!!!!!!!!!!
Sent from my PG86100 using xda premium
QPST works on ICS just fine. No need to have everyone downgrading unnecessarily. Besides, GB users can just use the extended EPST codes.
Sent from my PG86100 using Tapatalk 2
i install sdk manager
and other files which it was mark as default
but to check if adb is installed correctly. i use cmd and enter adb devices
and i got the error " adb is not recognized as internal or external command on windows "
fine then i tried to get some help with device manager, i saw portable devices --> Xperia neo v.
and this is upto date, i stll click on update drivers --> Browse from my computer -- > let me pick manually --> Next
here i get only one compartiable hardware which name as " MTP usb device "
so i click have a disk enter this link " C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver "
The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems.
http://forum.xda-developers.com/showthread.php?t=1413293
i read this and try to help myself but
and i wont find this thing anywhere
9. Select Show all and click next
10. Click Have Disk, then Browse
11. Go to your extracted folder and go into it, until a file called android_winusb.inf is there. Double click that (NOT android_winusb_old.inf)
12. Click OK and then Next
-Note: If it says not signed, just click next anyway
13. Wait and if it says not signed, click install drivers anyway
14. Wait until it's done, then close all of your programs
15. Press the windows key and R at the same time on your keyboard
16. Type cmd and hit enter (Command prompt will appear)
17. Copy and paste the following code into it:
Code:
echo 0x0e79 >> "%USERPROFILE%\.android\adb_usb.ini
18. Type adb kill-server
19. Type adb devices, and your device should now show up
20. Hit the thanks button below
Please any of the xpert help me....:crying::crying::crying:
I forget to say i am using windows 7 64 bit
with xperia neo v 4.1 upgrated version
Qutub Uddin said:
I forget to say i am using windows 7 64 bit
with xperia neo v 4.1 upgrated version
Click to expand...
Click to collapse
Have a look at the 'basics' link in my signature. It tells you how to install the drivers properly.
Sent from my Galaxy Nexus using Tapatalk 2
I did it, adb installed in xperia neo v....
ITs alryt now....
thanx to veyka :good:
he help me with this
Google : how to add adb to your path...... this thing works for me
and i follow this steps. now adb is working fine after installation. i think people can help others with this link. and you too :good:
Qutub Uddin said:
ITs alryt now....
thanx to veyka :good:
he help me with this
Google : how to add adb to your path...... this thing works for me
and i follow this steps. now adb is working fine after installation. i think people can help others with this link. and you too :good:
Click to expand...
Click to collapse
As with any executable in windows, if you are in a different directory than the executable, you either have to provide the full path when executing it, or add the path of the executable to your windows path. This is not something specific to ADB, it is common for any executable in windows.
Sent from my Galaxy Nexus using Tapatalk 2
Hi,
I've just spent a few hours trying to fix a problem with Kies and Windows 7. I had just used Odin3 and download mode to download a Chainfire kernel onto my GT-I9100, and afterword when I connected my phone Windows 7 would try installing drivers and fail on the MTP driver. I tried a lot of things to fix the problem, the only information I could get on it was an error message "Device Cannot Start (Code 10)".
I had spotted that when connecting my phone in download mode to Odin3 that Windows 7 had detected and installed a driver for "Unknown Device". On a hunch that this driver was causing the issue with connecting after using Odin3 I tried to completely uninstall it.
This is what I did (the first 8 or 9 steps are just to enable Device Manager to show *inactive* device drivers so you can uninstall the Unknown device. I've nicked this these steps from another site since I'm not allowed to link it yet):
1. Go to Control Panel and double click on System. You can also right-click "Computer" on the Start menu (or on the desktop if it's shown there) and choose Properties.
Note: A faster way for opening up the System applet is to press the Windows logo key on your keyboard and then press Pause/Break at the same time.
2. Click on "Advance System Settings" link, and then click on the "Environment Variables" button.
3. In the System Variables section click on the "New" button.
4. In the New System Variable dialog box, under the Variable Name value enter devmgr_show_nonpresent_devices (just copy the value from here and paste it there) and give it a variable value of 1.
Click Ok.
5. In the Environment Variables window notice how the new variable appeared in the System Variables section. Click Ok.
6. In the System Properties window click Ok.
7. Log off and log on.
8. Open Device Manager (Control Panel > System > Hardware > Device Manager).
9. From the View menu click Show Hidden Devices and searched for Unknown Device under Portable Device and USB Devices.
10. Right click the Unknown Device and select to uninstall, making sure to select complete removal of drivers option.
11. Restart the PC.
12. Start Kies without plugging the phone in.
13. Click on Troubleshooting for USB device and continue until it repairs the drivers.
14. Reboot the PC. Open Kies and plugin the phone again and let it reinstall the drivers.
Hope this sheds some light on this pernicious issue.