Hi Guys,
I've had my Hero for a while now and I've got a problem were it will not make a stable 3G/HSDPA connection, browsing the internet etc works perfectly fine when I have "Use only 2G networks" selected but when its unselected and my Hero shows the 3G or H symbol the connection simple times out when I try to use it.
The area I'm in has a very good 3G signal, I've tried my sim card in a friend's phone and it connects to 3.5G with full bars and browses the internet just fine. (the issue follows me no matter where I am)
I've checked my APN settings and these are all correct, I've updated my Radio to the latest supplied on Modaco and just today upgraded to Modaco's 3.1 rom.
Anyone have any suggestions to fix this? Or experiencing the same issue?
Related
Hello,
I installed then new ROM 2.11.255.1 on an English TyTN. Now it shows a specific icon when it's connected thru GPRS, EDGE, 3G or HSDPA, and it's cool.
Well, I noticed that when it's connected to data network and it shows the H icon of HSDPA, any attempt to make a phone call fails.
The issue appears also if the device is connected but it's not transmitting or receiving data.
Disconnecting the data connection fixes the problem, making me able to make phone calls again, but this is not a workaround when Direct Push is enabled, because when I disconnect the data connection it tries to immediately reconnect...
Does anybody has the same issue?
My provider is Telecom Italia Mobile.
Thanks!
Hi!
I have the same issue! this is extremely annoying, and sofar i dont know any workaround then to turn off push and disconnect the data session. In hoping the official WM6 rom with its upgrades will take care of this issue...
In Holland a similar problem was found by several users. It turned out to be a problem of the service provider (KPN), some problems with their hardware. The issue should be fixed later this year. You should check if more customers of the service provider have the same issues, as it might not be your phone or rom version that causes the problems.
Depends of you network ...its nothing related with your phone or radio version. Just disable hspda.
Hello,
I have an unlocked AT&T motorola atrix 4g mobilephone in Spain. If I put inside it a Vodafone SIM card I can connect to the internet (3G) without any problem after setting the APNs, but when I try it with a Euskaltel SIM card (an Spanish virtual mobile network provider that uses the Vodafones network) I can't connect to the internet (3G) even if I set the correct APNs.
The problem is not the SIM card because it works in a Nexus S after setting the APNs, and as I have said, the Atrix also connects to the internet with a Vodafone SIM card. But Euskaltel+Atrix doesn't work.
The wierd thing is that after I set the APNs, or activate the internet roaming, sometimes appears the arrows that it is connected but just for a few seconds and then dissapear, but even with the arrows if I open quickly the web browser it claims that doesn't have internet connection.
I have tried with other ROMs and the same thing happens, and also with an AOSP ROM like CM7 beta, there is no way to make it work.
Does any one have any kind of clue to solve this?
Regards and thank you
gonzalobf said:
Hello,
I have an unlocked AT&T motorola atrix 4g mobilephone in Spain. If I put inside it a Vodafone SIM card I can connect to the internet (3G) without any problem after setting the APNs, but when I try it with a Euskaltel SIM card (an Spanish virtual mobile network provider that uses the Vodafones network) I can't connect to the internet (3G) even if I set the correct APNs.
The problem is not the SIM card because it works in a Nexus S after setting the APNs, and as I have said, the Atrix also connects to the internet with a Vodafone SIM card. But Euskaltel+Atrix doesn't work.
The wierd thing is that after I set the APNs, or activate the internet roaming, sometimes appears the arrows that it is connected but just for a few seconds and then dissapear, but even with the arrows if I open quickly the web browser it claims that doesn't have internet connection.
I have tried with other ROMs and the same thing happens, and also with an AOSP ROM like CM7 beta, there is no way to make it work.
Does any one have any kind of clue to solve this?
Regards and thank you
Click to expand...
Click to collapse
Try creating a new apn & call the first field "euskaltel" & the second one "internet", leave the rest as they are, click save & activate it. That worked for me a couple of months ago with a yoigo card.
It doesn't work, but thank you anyway
Hi everyone,
I have a X10i running CM7 2.3.5 baseband 2.1.71 kernel 2.6.29-zdzihu-19082011
I have a data plan through my service provider (I've been able to access data no problem before with this device and this ROM and this SIM). I recently found out I was using the wrong APN "internet.fido.ca" and I am now using the correct APN "fido-core-appl1.apn".
I am in a good service area, however I notice that sometimes my data connection is intermittent. I see the H or 3G with the signal bars however I can't send/receive data.
Is there something I'm doing wrong? It was working great since last Friday when I changed the APN.
Yesterday, my phone was working fine. Today, I wake up and instead of showing H or E in my signal bar area, I just have the bars which are full.
I can send and receive texts, but no photos. No webpages are accessible, email won't sync etc. But I can still make and receive calls as well.
I'm running Neutrino V2.5. This morning I flashed the 36P radio (from 30P) in hopes that might help. Didn't change anything.
Not sure if any of this is needed but here it is anyway:
Signal Strength - 93dBm 10asu
Mobile Network Type - HSPA
Mobile Network State - Disconnected
Wifi is still working fine as well.
Any help is greatly appreciated!
Luke
I'm experiencing the same issue. Not sure what's going on. I went into settings to search for available networks and it's been "Searching" for like 15 minutes. Behind the "Searching" dialog I can see two options for AT&T and looks like one for T-Mobile. If I try to press back to cancel the search, it just takes me back to the last screen. I've also tried resetting APN. ugh.
Check the APNs configurations you might have to set them again.
I read over Atrix Dev that there's a weird bug in Neutrino ROM 2.5 that remove the APNs.
Settings -> Wireless & Networks -> Mobile Networks -> Access Point Names
Hope that helps
Hello,
Recently I got new Phicomm FWS610 phone, but I have problem with internet connection. Wi-Fi works great, but GSM or 3G not working at all. I have data plan, but when I enable it I still don't have internet. APN settings is ok and sim card too, because another phone works fine. Next problem is that when I try to manual search for network it show error. I'm using android 2.3.7. Where start fixing this problem?
EDIT: In notification area there is "no service" but I can make calls and text messages
bump. I really need to know if this hardware or software problem
bump.