Australian Accent Support for Voice Commander - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi everyone
I recently bought a dopod 838 pro from Malaysia and with the help of xda developers I've updated to CRC's r13.5 and it's going great! The guides have been extremely helpful for a phone noob like me
However, I seem to have hit a brick wall. I want to download the Australian accent support for Voice Command offered on the HTC site (http://www.htc.com/au/SupportDownload.aspx?p_id=37&cat=3&dl_id=277) but it won't accept my serial because I have a Malaysian serial rather than an Australian.
I've tried setting my location on the site to worldwide, but the download is only available to Australia and I've tried entering other serials from other countries that I've found on the net, but to no avail. And after searching both these forums and the net, it seems the only way I can access the download is with an Australian serial
So I was wondering if anyone with an Australian serial could pm me? Or if privacy is an issue, they could download the update themselves and send it to me?
I would be extremely grateful!

Related

Always enable SMS delivery report?

Hi ,
I am using the XDA O2.
I found the 'Request SMS text message delivery notification'is very useful
when I send SMS to others. But I have to enable it everytime. How can I
always open this function ? maybe to modify the XDA O2 registry to get it?
Are here anybody with rich knowlege can raise a solution for me?
[email protected]
Great Thx
Li
you can put
*0#
as the first part of the subject. It's not permanent, but only takes a few seconds to type.
Regards
Tim
It's very annoying that you can't set this as a default, but I haven't found a solution. Even the PPC developers at MS say it is not possible at this time.
The *0# trick doesn't work for me, however. I'm on T-Mobile in the US.
this code is operator specific... it can be *n#, *0# or DREQUEST
I figured it probably was. I can't make it work. If anybody knows what the code is for T-Mobile, please post it.
Thx for so much idea.
I am in China Mainland and I tried *0#, it's useless. So could somebody can raise more special command cold here?
Regards,
Li
In Germany for T-Mobile, receipt request is *T#
Here in Norway it's *k#
Doesn't work for US T-Mobile.
For T-Mobile U.S. i beleive it's *noti#
Excellent! That's it!
And for France, SFR operator, which code???
Orange Netherlands = .... ??
does any body have more suggestions i need the UAE one but i believe it should be like france
Enable SMS Delivery Report on your PPC
Hi everyone,
Hope this tip is useful.
Click Here
or copy and paste the following url in your browser.
http://pocketpcdubai.infopop.cc/eve/forums/a/tpc/f/6141068401/m/4531014011?r=4531014011#4531014011
regards
cluelessme

miniGPS for the XDA

Does anyone know if there is a XDA version of miniGPS. A utility that picks up the GSM cell number that your phone is currently connected to. In that way you have a sort of GPS function in the XDA.
See
http://my-symbian.info/7650/applications/applications.php?faq=2&fldAuto=279
There are some projects ongoing in germany regarding this question. Below you'll find some links, where you'll find some more details - but in german :
http://www.xscale.de/modules.php?name=News&file=article&sid=106
http://www.ppc-welt-community.info/...6237b206468eb50147f582d03f619d&threadid=25564
Regards
:roll:

o2 uk settings for spv 550?

hello to all..first post .. i have searched these boards but couldnt find the correct up to date settings for this phone..i downloaded a cab file with the settings on,but comes up with a certificate error(cab originally for wm6)so i would like up to date settings for o2 prepay .. i have also tried the o2 site to get settings but get a text to say it cant configure ....hope someone can help sort me out kind regards akanic
got sorted in the end ...google was my friend but whats the point of message boards like this if you just get told to google? are we not supposed to help each other out? kind regards akanic

I would appreciate a lot if you guys can give me some suggestion =)

I have owned the HTC tytn II before and i have bought the Touch Pro recently, I have browsed a lot of information on the forum and the only thing I've tried with my Kaiser was the Kaiser tweak.
There are a few questions i would like to ask if you guys can help me out
1. I am ordering the TP with 900/2100Mhz for WCDMA, I am currently studying in the US and will be moving to Hong Kong shortly, I wonder if 3G will work fine in HongKong?
2. Since i am from Hong Kong, sometimes i do use Chinese for various things and I would like Chinese to be supported by the phone as well. What is the best way to do it? I tried CE-star with kaiser with yahei.cab and it worked fairly well, but the music player from the touchflo interface can't recognize any of the Chinese song name at all. On the other side, i am looking at the possibility of installing Chinese Rom in the TP so i will be able to get Chinese support by the phone natively. On the other side, i really would like to have a English interface so is it possible to cook the ROM in the way that it is English UI and it supports Chinese at the same time?
Thank you for all you guys help. I have been browsing for a lot of stuff on this forum, but i really can't seem to find a solution for the 2nd question.
Check out this thread for ways to get Chinese support. The easiest way i would see it is that you install a Chinese ROM and have built-in support for it.
Which thread?
Ah, sorry about that, forgot to link that thread. Here it is.
Thanks a lot, that actually looks great to me!
By the way, a third question comes to my mind, is there a way to create a custom input method for Windows Mobile?
I would like to create a input for Windows Mobile such that inputing specific sequence of letters will give out specific list of words which i can choose from...using the keyboard
I am looking at http://msdn.microsoft.com/en-us/library/bb158689.aspx but i have no idea what it is trying to say
There is no WCDMA 900/2100 network in the US, but you can still use the phone on regular GSM networks (AT&T or T-mobile).
I don't know the details but you should be able to use WCDMA 2100mhz in Hong Kong (3, CSL, PCCW, Smartone):
http://en.wikipedia.org/wiki/List_of_Deployed_UMTS_networks#Asia
However there has been some talk about China shutting down WCDMA networks to replace with its own TD-SCDMA networks, so there could be some problems.
For the MP3s, make sure they are properly tagged; Most PC software can read non-English tags even if they are encoded improperly, but the TouchFlo3D player is picky. The easiest way is to use ID3v2.4 tags with UTF-8 characters. A program like Tag&Rename will update all of your MP3s to use ID3v2.4 + UTF-8.
There is a little update to my current problem =) Just got my Touch Pro today and tried various things...
Displaying of Chinese is easy to be solved, basically various cabs can do the trick.
Inputting Chinese, however, is pain in my a$$
I've tried to install the hand writing way of inputting Chinese by different methods.
1.) When i used CE-star, everything worked, but when i use the TP with keyboard, all words mess up and i can't see anything i typed...(although it will show up again when the keyboard is closed...)
2.) When i tried the other cabs recommended in this thread, the Chinese input only work when installation of complete install of the input method, which means i cannot choose only the handwriting input. I will have to also add that if the handwriting input is chosen as default, it will crash the system and i will have to do a hard reset.
On the other side, if the complete install happened, i cannot type english thru my keyboard(not even numbers...)
Is there anyone who can help me with this?

Found a Oppo cloud any country sign in page

So
I found this page https://id.oppo.com/login?region=en
It will let you use any number from any country. I signed up ok with my UK number.
But I still can't sign in to My Oppo on the phone, as it still want's a Chinese number
Anyone tried this with success?
I got it to work
I used that link to sign up with my UK number.
After I went to My Oppo app on the phone. Now this is what caught me out.
If you are in the UK, you have to miss the 0 from your mobile number.
So if it's 099887766 you type in 99887766
Then a new option on teh left pops up where you can chose any country in the world.
Then put your password from the sign up. It will send a text to your number, and that's it
Now to see what benefits(if any)it brings.
Well the only thing you get is some cloud space.
I was hoping that I could change the launcher...but no...
Hello
Im Turkish so my English is bad...
I need OPPO Cloud APK but ı couldnt found it
I would appreciate if you add

Categories

Resources